Used Kraussmaffei Extruder For 3-Layer Pipe Production for sale (75,921)

Year of construction: 2000, condition: ready for operation (used), Clamping force: 3000kN, stroke volume: 1047cm³, shot weight: 953g, injection pressure: 1778bar, screw diameter: 70mm, tie-bar spacing: 630mm, opening stroke: 1150mm, ejector stroke: 200mm, installation height: 330mm, platen width: 1050mm, platen height: 995mm. Machine dimensions X/Y/Z: approx. 6250mm/2050mm/2400mm, weight: approx. 12500kg. Documentation available. An on-site inspection is possible. Credpfxszcyqto Ailsh

Condition: new, functionality: fully functional, Year of construction: 2013, Brand: Krauss Maffei Technologies GmbH Model: KME 38-30 Screw type: Single screw Year of manufacture: 2013 Screw diameter: 38 mm Csdpfx Aoz Eilzsilsrh L/D ratio: 30 It is supplied without a screw and is in very good condition; the machine was never used in production.

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer this very good PMH (Plasticmaschinen handelsgesellschaft) PMH DS25-32LD twin-screw extruder, year of manufacture 2022. Manufacturer: PMH Plasticmaschinen handelsgesellschaft Model: PMH DS25-32LD twin-screw extruder Year of manufacture: 2022 Condition: very good Category ID: 452 Type: PMH twin screw extruder PMH Compounder DS25-32LD, with co-rotating, segmented twin screws ("good as new") The machine is designed with an 11 kW three-phase drive and a distribution gearbox for 95 Nm at 400 rpm. The mounted safety coupling is combined with a cut-off contact in case of overload. The maximum permissible melt pressure is 150 bar and is monitored by a pressure sensor. Individual housings allow you to configure the machine flexibly according to your requirements. The segmented screws with a diameter of 25 mm are designed in the standard version with several kneading zones and a decompression zone (atmospheric degassing). A blind cover for the decompression zone is included in the scope of delivery. Ceramic heaters with thermal sensors and cooling fans control the temperature. A stainless steel funnel is mounted on the filling opening. The electrical control system is integrated into the machine frame. All heating zones are switched contactlessly via solid-state relays. A swivelling touch panel is available for user-friendly operation. The head plate is equipped with a mass pressure sensor. The mass pressure monitoring system switches off the drive when the set maximum mass pressure is exceeded. tool adapter with 4-hole nozzle plate Options: Vacuum pump for the degassing zone (only atmospheric degassing offered) Csdpfx Aieznkx Doljrh 3 metre water bath Air-Knife Used strand granulator If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), Year of construction: 2008, Krauss-Maffei horizontal injection molding machine with 120 tons of clamping force. Electric machine. Year of manufacture 2008. Control MC5. 63.000 working hours. 40mm spindle. Extras: anti vibration blades, 8 zones flow meter. Additional options: 1x pneumatic valve, 6 zones hot runner, Euromap 67 for Robot connection. The machine is delivered RE-Conditioned by our technical team and in optimal working condition. We can offer a start-up service at your premises. Technical Details Credottgybspfx Ailjh INJECTION WEIGHT 185 gr INJECTION VOLUME 201 ccm WORKING HOURS 63000 YEAR OF MANUFACTURE 2008 DISTANCE BETWEEN COLUMNS 470x470mm PLATE DIMENSIONS 780x770mm CLOSING POWER 1200 kN INJECTION PRESSURE 1860 bar SPINDLE THICKNESS 40mm MINIMUM MOULD THICKNESS 200/450mm OPENING STROKE 850mm

Condition: used, Year of construction: 2005, Injection molding machine Manufacturer: Krauss Maffei Type: KM350 /1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Tool opening force: 220 kN Drive force of moving platen: opening: 105 kN closing: 95 kN Platen size (h x v): 1,060 x 1,095 mm Mold opening (h x v): 710 x 710 mm Tool opening stroke: 920 mm Minimum tool installation height: 380 mm Opening distance: 1,300 mm Ejector stroke: 250 mm Ejector force front/rear: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Control zones for cylinder heating: 6 Dry cycle rate: 1,550 1/h Oil capacity: 720 liters Dimensions and weights: Net weight with control cabinet: approx. 16.0 tons L/W/H: 6,510 x 2,040 x 2,380 mm Maximum tool weight: 4,780 kg Injection unit: Working capacity: 1900 Screw diameter: 70 mm Injection pressure: 1,778 bar Displacement: 1,047 cm3 Shot weight for PS: 953 g Injection rate: 527 cm3/s Screw speed standard / option: 1/min. 285/349 Screw speed standard or stage 1: 95 PS Screw speed option or stage 2: 117 PS Nozzle force: 82 kN Fully hydraulic 2-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated control panel with TFT color display and Floppy disk drive (3.5 inch) for data backup Plasticizing: 1 complete thermoplastic plasticizing unit in wear-resistant Csdpfxjxu Uvas Ailjrh design, screw diameter 70 mm with backflow prevention and open nozzle Nozzle radius: 15.00 mm Nozzle bore: 6.00 mm 51026ä

Condition: used, Year of construction: 2007, operating hours: 96,684 h, overall weight: 7,800 kg, This KRAUSS MAFFEI KM-110-380CX injection molding machine will be auctioned off online as part of our industrial auction / machinery auction – site liquidation of a well-known toy manufacturer – injection molding machines, warehouse equipment, logistics accessories – STEP 3. Credpoz H Sc Esfx Ailoh You can find this and many other items on our platform.

Condition: used, Year of construction: 2006, Injection moulding machine Krauss Maffei KM 800-4300 MX, year 2006 Crsdpow Hwr Dofx Ailoh The machine is equipped as follows: - 5 hydraulic cascade controls - Injection unit with a 90 - MT5 control system - Krauss Maffei handling system - 2 conveyor belts

Condition: used, Clamping force: 800kN, an on-site inspection is possible. Crjdpfx Aiezyq S Ijleh

Condition: good (used), Year of construction: 2008, For sale is an injection molding machine from Krauss Maffei, type KM 110-380. The machine is in good to very good condition; all maintenance and inspections have been carried out. Technical data: Year of manufacture: 2008 Extended tie bars Pneumatic nozzle shut-off 2x hydraulic core pull 31,000 operating hours Cylinder diameter: 35 mm Clamping force: 1100 kN Mold opening force: 70 kN Euromap63 interface for version > 1-04-09 Nitrogen accumulator available Included components: Wedge shoes with screws and nuts Double-end wrench Declaration of conformity for the complete control cabinet Certificate USB memory stick Ejector coupling – mechanical, included in the control cabinet Crodpfx Aoibyateiloh All prices are plus VAT. Machine buying and selling BUYING / SELLING PRODUCTION & METALWORKING MACHINES, AMONG OTHERS. Do you need a high-quality, but affordable, metalworking machine for your production? Or would you like to sell yours? For more information or to contact us, please visit our website.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 1,000,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: Cedjud N Hdopfx Ailorh The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC)  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: good (used), Year of construction: 1992, Manufacturer - ERW Year - 1992 Range of round pipe - 21 - 76 mm Codpsdlqkqofx Ailsrh Range of square pipe - 20x20 - 60x60 mm Sheet thickness - 0,8 - 3,5 mm Speed - 60 m/min. Lenght of line - 50 m Tools : square pipes - 25,32,38mm round pipes - 40, 51 mm Welding power - 180 KW Anode voltage - 14 kv Anode dissipation - 70 kw Frequency - up to 30 Mhz

Condition: excellent (used), KRAUSSMAFFEI KM 201-380 PX Injection Molding Machine Year of manufacture: 2020 Operating hours: 21,849 h Manufacturer: KraussMaffei Model: KM 201-380 PX Control system: MC6 – industrial control system based on real-time Ethernet technology Clamping unit design: five-point, double toggle lever mechanism, three-plate unit Clamping drive: servo-electric Injection and plasticizing drive: servo-electric Injection unit movement: servo-hydraulic CLAMPING UNIT Clamping force: 2,000 kN / 200 t Opening force: 300 kN Dimensions of mounting platens: 870 × 820 mm Distance between columns: 635 × 585 mm Opening stroke: 500 mm Mold height min.–max.: 250–550 mm Max. opening width: 1,050 mm Ejector stroke: 200 mm Ejector force front/rear: 39 / 19 kN Ejector speed: 350 mm/s INJECTION UNIT Screw diameter: 40 mm L/D ratio: 20:1 Injection pressure: 1,860 bar Injection volume: 201 cm³ Injection shot weight: 183 g Injection speed: 125 mm/s Injection rate: 157 cm³/s Screw speed: 334 rpm Plasticizing rate: 24.7 g/s Torque: 337 Nm Nozzle clamping force: 34 kN Nozzle radius: 10 mm Nozzle orifice: 4 mm ELECTRICAL PARAMETERS Connected load: 13.8 kW Protection: 63 A Heater power: 11.5 kW Number of cylinder heating zones: 5 Dry cycle according to EUROMAP 6: 2.0 s / 445 mm Oil tank capacity: 200 l WEIGHT AND DIMENSIONS Net weight with control cabinet: 14.3 t Dimensions (L × W × H): 6.12 × 2.17 × 2.21 m Cjdez Atc Ijpfx Ailsrh

Condition: ready for operation (used), Year of construction: 2012, operating hours: 49,627 h, clamping force: 3,000 kN, screw diameter: 70 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2012. This Krauss Maffei 300-2000 CX features a clamping force of 300 t and a screw diameter of Ø 70 mm. It has a maximum mould opening of 1000 mm and tie bar spacing of 630 × 630 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 300-2000 CX machine we have for sale. Contact us for further details. • PP injection capacity: 640 g • Mould dimensions (min.): 320 mm Csdoy S Tq Hepfx Ailorh • Tie bar spacing: 630 × 630 mm • Maximum mould opening: 1000 mm • Working hours: 49,627 h

Condition: ready for operation (used), Year of construction: 2012, operating hours: 46,424 h, clamping force: 3,500 kN, screw diameter: 80 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2012. This Krauss Maffei 350-3000 CX features a clamping force of 350 t and a screw diameter of Ø 80 mm. It offers a PP injection capacity of 640 g and a maximum mould opening of 1260 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 350-3000 CX machine we have for sale. Contact us for further details. Csdpfx Ajy S Tvvoilorh • PP injection capacity: 640 g • Minimum mould dimensions: 380 mm • Tie bar spacing: 710 × 710 mm • Maximum mould opening: 1260 mm

Condition: ready for operation (used), Year of construction: 2011, operating hours: 44,858 h, clamping force: 4,200 kN, screw diameter: 90 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 420-4300 CX features a clamping force of 420 t and a screw diameter of Ø 90 mm. It offers a maximum mould opening of 1400 mm and tie bar spacing of 800 × 800 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 420-4300 CX machine we have for sale. Contact us for further details regarding this machine. • Injection capacity (PP): 1.2 kg • Minimum mould dimensions: 380 mm • Tie bar spacing: 800 x 800 mm • Maximum mould opening: 1400 mm • Working hours: 44,858 h • The robot, conveyor belt, and material hopper are not included. Crodpfx Aiey S Tw Hsloh

Condition: ready for operation (used), Year of construction: 2011, operating hours: 42,519 h, clamping force: 5,000 kN, screw diameter: 100 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 500-4300 CX features a clamping force of 500 t and a screw diameter of Ø 100 mm. It has a maximum mould opening of 1530 mm and tie bar spacing of 900 × 800 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 500-4300 CX machine we have for sale. Contact us for further details. • PP injection capacity: 1.5 kg • Mould dimensions, min.: 480 mm • Tie bar spacing (H × V): 900 × 800 mm • Maximum mould opening: 1530 mm Crjdsy Tai Ejpfx Ailsh

Condition: ready for operation (used), The injection momlding machine corresponds to the hydromechanical two-platen series, clamping force: 550t, operating hours: approx. 80h, with Handling Krauss Maffei KM 250/ LRX-S 250. An on-site inspection is possible, the machine is located in Mexico. Csdpfx Aszrn Hmsiljrh

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 03/2003, total length: 8,550 mm, total width: 2,530 mm, wheelbase: 6,310 mm, color: other, Year of construction: 2003, ATM rear tipper with 1 lift axle! = More information = Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Empty weight: 8.950 kg Carrying capacity: 33.050 kg GVW: 42.000 kg Registration number: OH-28-FB Crodez H I I Dopfx Ailjh = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: used, Year of construction: 2005, Technical details: screw size: 90 mm injection shot weight in Polysterol: 1.758 g/PS closing pressure: 6500 kN weight of the machine ca.: 32 t Out of serial production Crjdotunccjpfx Aileh *

Condition: ready for operation (used), Year of construction: 2011, operating hours: 49,533 h, clamping force: 3,000 kN, screw diameter: 70 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 300-2000 CX features a clamping force of 300 t and a screw diameter of Ø 70 mm. It has a maximum mould opening of 1000 mm and tie bar spacing of 630 × 630 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 300-2000 CX machine we have for sale. Contact us for further details. Crsdpoy S Tqajfx Ailjh • PP injection capacity: 640 g • Minimum mould dimensions: 320 mm • Tie bar spacing: 630 x 630 mm • Maximum mould opening: 1000 mm • Working hours: 49,533 h

Condition: good (used), clamping force: 3,000 kN, Manufacturer: KraussMaffei Model: KM 300-1400 C2 Machine type: Hydraulic injection moulding machine Year of manufacture: 1999 Clamping force: 3000 kN International size designation: KM 1400 C2 / 300 Credpfoytnnzjx Ailoh Machine weight: 12,500 kg CE marking: present 2 units available Further information on request.

Condition: used, Fortuna Semi-Automatic Bun Forming Machine, Model 3 30-division Dough weight range: 960-2100 g Product weight range: 32-80 g Includes 3 forming plates (new) Optional: Base frame with fixed feet Csdpfsz A Sg Aex Ailsrh Base frame with castors (2 swivel castors with brakes + 2 fixed castors)

Condition: used, Year of construction: 2008, operating hours: 75,874 h, Compact hydraulic injection molding machine from KraussMaffei with MC5 control system and extensive peripherals. Manufacturer: KraussMaffei Machine type: Injection molding machine Model: KM 65-380 CX International size designation: 380 CX/65 Year of manufacture: 2008 Machine No.: 61011979 Clamping force: 650 kN Tie bar distance: 420 × 420 mm Max. mold opening stroke: 500 mm Min. mold mounting height: 250 mm Max. opening width: 750 mm Ejector stroke: 150 mm Control system: KraussMaffei MC5 Csdpfx Ajz Au Hzoiljrh Machine weight: 3,900 kg Operating voltage: 400 V Frequency: 50 Hz Fuse rating: 160 A Total current: 143 A Motor current: 37 A Peripherals: Frigel Microgel process cooler Frigel model: RCD80/12HHP Year of manufacture of cooler: 2014 Refrigerant: R407C Refrigerant quantity: 2.4 kg Cooling medium: Water Temperature range: -5 to +90 °C Max. pressure: 8 bar Weight of cooler: 240 kg Further visible peripherals: Distributor chute from M Fördersysteme, year of manufacture 2002 Equipment: Material/parts handling and additional process peripherals as shown in the images. Location: Freiburg Available from APRIL 2027

Condition: used, Year of construction: 2004, Technical details: screw size: 105 mm injection shot weight in Polysterol: 4727 g/PS closing pressure: 2300 kN Crsdpfx Astrbcbsiloh plate size: 2830 x 2400 mm opening stroke: 3700 mm daylight: 1100-1800 mm injection volume: 5195 ccm injection pressure max.: 2296 bar dimensions: 14,2 x 4,15 x 2,84 mm total wight: 143 t tie bars distance: 2000 x 1600 mm Robot system core pulls hot runner controller -     The machine is in a very good condition       -     Additionally complete cutters available. -     A conveyor belt and Robot Systems(Model 2012) *

Condition: good (used), Line now available for immediate sale. Was producing thins for supermarket contracts. Cedpfx Aiowhagmoljrh