Used Index G300 for sale (1,341)

Condition: ready for operation (used), Year of construction: 2012, operating hours: 50,106 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840 D solutionline, spindle speed (max.): 9,000 rpm, spindle motor power: 16,000 W, number of axes: 5, This 5-axis Matec 30 HV vertical machining centre was manufactured in 2012. It features a generous X-axis travel of 3000 mm, Y-axis travel of 800 mm, and Z-axis travel of 800 mm (horizontal). The machine is equipped with a powerful motor spindle, capable of speeds up to 9000 rpm, and a maximum table load of approximately 2500 kg. If you are looking to get high-quality machining capabilities, consider the Matec 30 HV machine we have for sale. Contact us for further details. • Travel Z: 800 mm (horizontal) • Travel Z: 700 mm (vertical) • Tilting swivel head with 1° indexing (Hirth coupling) • Swivel radius: 250 mm • Spindle power: 16 kW (40% duty cycle) • Spindle power: 11 kW (100% duty cycle) • Torque: 100 Nm (40% duty cycle) • Voltage: 400 V • Installed power: 55 kW • Central lubrication system • Machine status: fully functional • Operating hours: 50,106 h Codpeyrqvlefx Afgohc Additional equipment • NC rotary table Ø800 mm (horizontal), maximum table load approx. 2500 kg • Internal coolant supply through spindle (20 bar) • Paper band filter coolant system with approx. 450 l tank • Electronic handwheel • 3D measuring probe (Renishaw) • Work area lightingPlease note: the vice and zero-point clamping system shown are not included in the scope of delivery. Technical Specification Taper Size SK 40

Condition: like new (used), Year of construction: 2010, Retrofitted: 2026 Chsdpfx Afoz Alwqegec Numerical control: HEIDENHAIN TNC-i530 Technical features Dimensions Table dimensions: 8500 x 2500 mmNumber of T slots: 17T slots dimensions: 22 mm Traverses of axis X axis traverse: 8000 mmY axis traverse: 3800 mmZ axis traverse: 1500 mmVertical capacity (VC): 168 / 1668 mmDistance between columns: 3100 mm Milling head Auto-indexing differential head (UAD - 0,02º)Tool clamping system: HydraulicTaper nose: ISO50 (DIN69871) / Pull stud: DIN69872Speed range: 6000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 7200 / 12000 mm/min Weight and dimensions Maximum weight on table: 35000 kgMachine weight approximate: 79000 KgMachine dimensions approximate: 22700 x 7660 x 6800 mm Accessories Guarding: 2 sliding doors with a new perimetral wire-mesh fenceAutomatic tool changer: ATC-60Chip conveyor: 2longitudinal hinge typeElectronic handwheel: New HR-510Coolant: External internal high pressure through spindle Sale conditions Warranty: 6 months mechanical spare partsPrice and sale conditions: On request View all technical features

Condition: excellent (used), Year of construction: 2011, operating hours: 80,000 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 40 mm, displacement volume: 201 cm³, total length: 5,245 mm, total width: 1,525 mm, total height: 2,300 mm, overall weight: 7,200 kg, input frequency: 50 Hz, input voltage: 400 V, The machine comes from the current series production of a plastics processor and, according to the previous owner, is fully functional. An inspection at the production facility is possible after scheduling an appointment. Key data (according to manufacturer's specifications ENGEL) Codpsz Eimfofx Afgohc • Clamping force 1,200 kN (120 t), tie-barless clamping unit • Platen dimensions 790 × 790 mm (Wide Platen), minimum tool size 350 × 350 mm • Tool installation height min. 400 mm, opening stroke 506 mm, max. platen distance 900 mm • Ejector 130 mm stroke, 39.8 kN • Injection unit 1 (330H, horizontal): screw Ø 40 mm, displacement volume 201 cm³, specific injection pressure 1,221 bar / increased 1,667 bar • Injection unit 2 (80W, angled position): displacement volume 38 cm³ (screw Ø 22 mm) or 49 cm³ (Ø 25 mm) [CHECK 09/25: which screw] • Hydraulics: pump drive 30 kW, oil capacity 300 l • Connection 3 × 400 V, 50 Hz, 139 kW / 220 A • Control system ENGEL CC 200 [CHECK 09/25] • Operating hours 87,300 h (as of 09/2026); plasticizing cylinder Ø 40 mm from 2021 with 20,300 h (according to the previous owner) Your advantages • Tie-barless: The tool space is free from tie bars. Large and bulky tools with core pulls can be accommodated, for which a larger clamping force class would often be required in tie-bar machines. • Short setup times: Tools are installed from the side without tie-bar removal. • Automation: Robots travel horizontally into the tool space – smaller cell, lower hall height, shorter cycles. • Tool-friendly: Platen parallelism via the patented ENGEL Flex-Link system (according to the manufacturer). • Hydraulic connections for core pulls, parallel movements programmable (according to the previous owner) – for tools with sliders, undercuts and thread cores. • Combi version with space for a rotary table or indexing plate (according to the manufacturer). • Main injection unit with a newer plasticizing cylinder (2021). • Second injection unit, according to the previous owner, was not used in operation, therefore minimal wear. [CHECK 09/25: unit available + free injection test] Typical applications 2K hard/soft and two-color: handles with TPE zone, housings with molded-in seal, switches and operating elements, connectors with seal, rollers with soft tread, closures with sealing lip, cable glands, medical components, two-color design parts. Single-component: technical precision parts and parts with inserts. Scope of supply • Injection molding machine as described [CHECK 09/25: with both injection units] • ENGEL data sheet, layout plan, platen drawing Not included in the scope of supply: the peripherals visible in the photos (removal/automation with protective enclosure, temperature control units, material handling and drying, mobile switch cabinet) and tools. Terms and conditions • Price on request • Available presumably from week 48/2026 • Payment 100% advance payment • Transport throughout Europe on request Note: The technical specifications are based on the manufacturer's documentation and the information provided by the previous owner. They are for informational purposes only and do not constitute an agreement on the condition or a warranty within the meaning of §§ 434, 443 BGB. We will confirm individual values during the inspection or upon request. Offer subject to change, prior sale reserved.

Condition: used, Indexing table 400 mm hand Full set of tooling included (guide bars etc) Table bore 10 - 130 mm Key width from 2 - 32 mm Feed rate 0,5 - 5 M/Min; Table 690 x 460mm Table load: 2000 Chodpfx Afez D I Rmogec Ram adjustment:0 - 425mm Length: 1300mm Width: 1100mm Height: 1400mm Weight: 1800kg transport can be arranged

Condition: used, mileage: 100 km, power: 157 kW (213.46 HP), first registration: 03/2026, fuel type: diesel, overall weight: 7,500 kg, gearing type: mechanical, number of seats: 2, loading space length: 4,200 mm, Equipment: ABS, air conditioning, soot filter, Vehicle number: 540075 accident-free, service history, non-smoker ---- ASSISTANCE SYSTEMS * Lane change warning system * Start-off assistant * Rear view camera ENGINE TRANSMISSION & CHASSIS * Traction control (ASR) INTERIOR * Air conditioning LIGHT & VISIBILITY * Green tinted windows * Side marker lights * Daytime running lights Other features * Chassis color anthracite gray * Driver's cab color E1980 crystal white * Headlight insert. and bumper: Stone Grey * Cab steps and fenders Stone Grey * Wheel trim rings silver grey * Goodyear * Tire pressure monitoring system * Front axle(s): 215/75R17.5 * Driven rear axle(s): 215/75R17.5 * Without spare tire * Steel disc wheels, silver grey * Pneumatic steering column lock * Soft-touch steering wheel, color black * Roof hatch with manual operation * Driver's seat: Air-sprung luxury driver's seat * Passenger double seat, velour cover * Converter 24 V to 12 V, 15 A, 180 W * Emissions class Euro 6 * Manual transmission, 6 gears * Rear axle ratio 3.73 * Mechanical differential lock * 6-speed manual transmission 6S800 OD, 6.58-0.78 * Engine PX-5, 153 kW/208 hp. Cab emblem: 210 * Wheelbase 3.15 m / rear overhang 1.32 m * Standard component layout * Tank for AdBlue 30 l, right side of the chassis * Fuel tank left * AdBlue tank filler cap without locking * Rear underrun protection * Tail lights with bulbs * Battery box left, no spare wheel holder * Longitudinal member 210/4.5 mm, without internal reinforcement * EAS unit right, central discharge * Plastic fuel tank, 110 l * Maximum ambient temperature 38 degrees * Temperate climate * Air intake above, behind the cab * Water separator, heated * Body fastening method BAM 1, console type B * Fixed plug connection. Front driver's cab * Tail lift application * Use with drawbar, type plate, up to max. GVW * Pneumatic connection for trailer, swivel coupling * Crossbar D85-Dc70-V25 ball coupling D85, mounted * Electrical connection for trailer 24V/2x7-pin + 12 V * FGG chassis weight max. 7500 kg * Max. total train weight drive power 18000 kg * First transmission auxiliary drive N./4c-U-32/25 * Exhaust brake * Parking brake actuation with test position Chsdpfx Afsx Egr Ijgjc * Reverse alarm system * Basic immobilizer * DAF Side and Turn Assist * Alcohol lock, prepared * Electronic stability control (VSC) * Speed limit detection * DAF Drowsiness Detection * Rubber cab suspension, mechanical * Short-haul cab * Side not glazed / rear single glazed * 5 mirrors * Electrically adjustable mirrors * Mirror brackets, structure 2.50 - 2.60 m * Sun visor outside, green, translucent * Headlight beam for right-hand traffic * Halogen headlights with height adjustment * Adaptive Cruise Control with FCW and AEBS-3 * Digital tachograph, VDO 1C, version G2V2 * Speed limiter setting 85 km/h nom. * PACCAR Connect * Antennas: AM/FM + GSM + GPS * FMS connection, prepared * DAF Infotainment System: DAB radio with loudspeaker * Front: 3.60 t, parabola, raised, HD, F36 * Rear axle: 5.00 t, parabola, raised, SR 5.14 * Front axle 1, 3,200 kg, load index 124 * Rear axle 1, 5000 kg, load index 116 * Generator 100 A, batteries 2x 125 Ah * Guarantee Plus drive train-3 years-200,000 km * Meiller DSK Type 3 model 11 * Plug-in storage rack as bulkhead attachment. ---- Subject to prior sale and errors.

Condition: excellent (used), Dividing table – rotary table Brand: PDQ Diameter: 635 mm Height: 145 mm Base diameter: 760 mm Indexing: 45° via index Cjdsxazu Hjpfx Afgjhc or 1° and minutes via scale Weight: 280 kg

Condition: excellent (used), Rotary table Diameter: 300 mm Height: 82 mm Csdpfxexz Tu Ij Afgshc T-slot width: 10 mm Indexing: 2 degrees per handwheel revolution Width: 400 mm Depth: 450 mm Weight: 38 kg

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Specifications: Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 Deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Codoxdfazepfx Afgjhc Feeds (seconds/tooth): 5 to 34.3 Main Motor: 10hp, 1800 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs

Condition: used, Year of construction: 2011, operating hours: 5,051 h, functionality: fully functional, machine/vehicle number: 20, travel distance X-axis: 730 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 800 mm, controller model: PRO 5, spindle speed (max.): 14,000 rpm, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, Makino A61nx, 4-axis horizontal machining center, fully functional and can be inspected while powered on. 11,324 hours of power-on time 5,051 hours of operating/runtime 3,253 hours of machining time 4,188 hours of spindle runtime A Travels  X-axis travel (frame) ..... 730 mm  Y-axis travel (spindle) ..... 650 mm  Z-axis travel (table) ..... 800 mm  Distance from pallet surface to spindle center ..... 80 ~ 730 mm  Distance from pallet center to spindle nose ..... 100 ~ 900 mm  Linear guides, heavy-duty design, size (roller bearing) ..... #55  Size of ball screws (X, Y-axis / Z-axis) ..... #45 / #50 B NC rotary table (DD motor) C1 Spindle 14,000 rpm (240 Nm)  Tool holder ..... HSK-A63 D Feed drives  Rapid traverse speed ..... 60,000 mm/min  Feed speed ..... 1 ~ 50,000 mm/min  Feed speed (jog mode) ..... 1 ~ 8,000 mm/min Tool magazine  Storage capacity ..... 60 tools  Maximum tool diameter with space allocation ..... 170 mm  Maximum tool diameter without restrictions ..... 70 mm  Maximum tool length ..... 510 mm  Maximum tool weight ..... 12 kg Tool change time increases for tool weights over 8 kg.  Maximum imbalance relative to the gripper groove ..... 11.7 Nm  Maximum total weight of all tools in the magazine ..... 180 kg  Tool-to-tool change time (without door movement) ..... 0.9 s  Chip-to-chip time (ISO method) ..... 2.8 s  Tool ready time in the magazine (min./max.) ..... 3.1 / 6.1 s Csdpszw Dzdjfx Afgshc Drives  Main drive ..... AC15 kW  Feed drives (XYZ axes) ..... AC4 kW  Table (indexing table) ..... AC0.9 kW

Condition: new, power: 350 kW (475.87 HP), fuel type: electric, axle configuration: 2 axles, color: white, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Options: * CRYSTAL WHITE * DAF Digital Vision System * Laminated glass with sun protection film * Central locking, 3 keys, 2 remote controls * Windshield with sun protection film * External sun visor * Two LED headlights for the rear of the cab * Rear view camera with preparation for 2nd camera * DAF Corner View * High beam assistant * Fixed cab steps * Front chassis version: Aero floor panel * Air-suspended cab * XG+ cab * Headlight beam pattern for right-hand traffic * Headlights without height adjustment * LED skylights * Chrome trim on the front of the cab, side walls: darkened * LED headlights, cornering and fog lights * LED daytime running lights * Side fenders, foldable on both sides * Adjustable roof spoiler, for XG+ cab * Side panel: complete * Chassis color: Black * Roof spoiler color: Crystal White * Side fender color: Crystal White * DDVS housing color: Crystal White * CRYSTAL WHITE * Color of headlight bezel: Crystal White * Color of bumper: Crystal White * Lower cab step: Crystal White * Color of side panels: Crystal White * Steering wheel, leather * Driver's seat: Xtra Leather Air * Passenger seat: Xtra Leather Air * Door panel: Leather * Cab interior trim: Natura * Passenger seat, swivel pedestal * Mattress with mattress topper for DAF Relax Bed * Curtains with partition curtain * Refrigerator and drawer * Dashboard design: Vision * Auxiliary power supply: Standard + 2x 40 A * LED interior lighting: Exclusive * ECAS remote control with extended functions * Stationary air conditioning, integrated * Color of interior trim: Exclusive * Cab wall paneling: textile * Roof hatch with electric operation * Preparation for air compressor * Driver's seat, fixed pedestal * Upper sleeper bunk * Automatic cab climate control * Safety net for upper sleeper bunk/storage compartment * Armrests on both sides of the driver's seat * Armrests on both sides of the passenger seat * Storage compartment with drawer in the center console * Stationary heater with waste heat pump and timer * Speakers: Exclusive * Predictive Cruise Control * Digital tachograph, VDO version G2V2A * Speed limiter: 90 km/h * PACCAR Connect 10-year subscription * Tachograph calibration * Antennas: Radio, 2x cellular, GNSS, Extra: CB * DAF Truck Navigation * Infotainment including DAF Truck Navigation * Wireless charger * Adaptive Cruise Control with FCW and AEBS-3 * Preparation for toll system * FMS connector, extended and prepared * Driver Performance Assistant * Rear warning system * Lane change warning system * Emergency hammer * Hill start assist * DAF Side and Turn Assist * Electronic Stability Control (VSC) * Speed limit recognition * DAF Drowsiness and Distraction Detection * Main chassis switch * Standard immobilizer * Axle load monitoring * Front leaf suspension: medium * Front: 9,00 t, parabolic, 183N * Front axle 1, 9,000 kg, load index 160 * Rear axle load capacity 13,00 t * Stabilink rear axle suspension * One ride height position, standard height * Rear: Air suspension SR1344 * Rear axle 1, 13000 kg, load index 149 * Front axles: 385/55R22.5 * Alu Alcoa Dura-Bright 32 mm * F1,385/55R22.5GO EQMSU 160/158 L Steering ABA 3P * Wheel trim rings, silver-grey * Goodyear * Tire pressure monitoring system * Driven rear axle(s): 315/70 R22.5 * R1,315/70R22.5GO EQMDU 154/150 L Traction ABB 3P Chsdpfx Afsz Hg Dkegjc * Urge-to-move * Rear axle ratio 2,38 * Mechanical

Condition: excellent (used), functionality: fully functional, The dividing head is equipped with an SK40 spindle and has a spindle bore of 25mm. It can be swiveled from right to left up to 90° each. The dividing head spindle can be tilted 6°/15° from and towards the machine. It is suitable for all Deckel FP series milling machines and their "licensed machines," such as the Macmon M100. The distance from the spindle axis to the tailstock guide is 100mm. Direct division is possible using a 360° division circle or 24 x 15° indexing. Chedpfxoz Hyyfo Afgsc The distance from the dividing head center to the tailstock center is 400mm. Indirect division is achieved with a worm gear of 40:1, using a scale disk with 1' division or three different hole disks (A: 27; 31; 34; 41; 43 – B: 33; 38; 39; 42; 46 – C: 36; 37; 40; 58). Also included are a Röhm four-jaw chuck, a three-jaw chuck (possibly Röhm) with adapter rings, and a two-jaw chuck, as well as a tailstock with a tailstock bearing. The dividing head, which was originally non-functional, along with all accessories, has been disassembled into individual parts, refurbished, made fully functional, and painted in two colors (RAL 7035 light gray / RAL 5004 dark blue). The dividing head is not in use and can be delivered immediately. Minor signs of wear from previous use are visible to a small extent. A single-use transport crate, with a total weight of 109 kg, has been prepared for transport. A manual compiled from Deckel descriptions is also included in the scope of delivery.

Condition: used, mileage: 45,000 km, power: 390 kW (530.25 HP), first registration: 06/2025, fuel type: diesel, overall weight: 18,000 kg, gearing type: automatic, emission class: euro6, Equipment: soot filter, Vehicle number: 550025 1st owner, accident-free, service book maintained, non-smoker ---- ASSISTANCE SYSTEMS * Lane Change Warning System Chsdpjy Tgqpjfx Afgoc EXTERIOR * Sun visor, exterior OTHER EQUIPMENT * ZF Intarder Additional Features -----Color/Paintwork----- Chassis color: Anthracite gray * Cab color: E1980WHTE CRYSTAL WHITE -----Tires/Wheels----- Goodyear * RR, not applicable * Front axle(s): 385/55R22.5 * Aluminum Alcoa Dura-Bright 32 mm * F1,385/55R22.5GO EQMS 160/150 K Steering BBA 3P * R1,315/70R22.5GO EQMDU 154/150 L Traction ABB 3P -----Equipment/Special Equipment----- XG+ cab * Cab air-suspended * Adaptive Cruise Control with FCW and AEBS-3 * Front: 8,00 t, parabolic, 163N * Emission class Euro 6 * OBD-E engine H6, fuel B7 * Automated transmission, TraXon, 12 gears * Wheelbase 4.00 m / rear overhang 0.99 m * Standard component arrangement * Horns, 2 sets * Headlights with height adjustment * LED skylights, additional LED lights, cab roof, pre-wiring * Two LED headlights for cab rear wall * Windshield with sun protection film * Laminated glass with sun protection film * DAF Corner View * Central locking, 3 keys, 2 remote controls * Side fenders, extended. Both sides foldable * Side skirts with extension on upper/lower side * Door panel: Leather * Driver's seat: Xtra Leather Air * Driver's seat, swivel pedestal * Passenger seat: Cinema & table, leather upholstery * Refrigerator and drawer * Mattress with mattress topper for DAF Relax Bed * Curtains with partition curtain * LED interior lighting: Exclusive * Stand-alone air conditioning, integrated * Roller blind, passenger side * Auxiliary power supply: Standard + 2x 40 A * ECAS remote control with extended functions * FMS connector, extended and pre-wired * PACCAR Connect with navigation and tablet software * Digital tachograph, VDO 1C, version G2V2 * Speed limiter set to 90 km/h * DAF Info Exclusive pre-wiring, Exclusive speakers * Antennas: Radio, 2x mobile phone, GNSS Extra: CB * Rear: Air suspension SR1347 * Rear axle 1, 13000 kg, load capacity index 149 * Axle load monitoring * MX-13 engine, 390 kW/530 hp, cab emblem: 530 * ECO performance * 12-speed TraXon transmission 12TX2620 DD, 16.69-1.00 * Rear axle ratio 2.40 * Mechanical differential lock * Compressor 2-cylinder without clutch * EAS unit right, . h. Overh. 85-l-AB fender left * Compressed air tank made of aluminum * 1185-l-Al fuel tanks: 845 stage left + 340 right, H 620 mm * Fuel tanks left and right * Catwalk with step, extra long * One wheel chock * SAF S36-20, cast iron, 150+40mm, low maintenance * Fixed wired body signals and warnings * Fixed control transmission secondary drive, no 1st transmission secondary drive * Generator 150 A, batteries 2 x 210 Ah AGM * Technically permissible GVW chassis weight max 19500 kg * Maximum ambient temperature 45 degrees * Garantie Plus vehicle - 3 years - 500,000 km * Extended maintenance interval * Standard tool kit * Standard fuel quantity + 30 liters * Executive package XG/XG+ * Climate package ---- Subject to prior sale and errors. The vehicle description serves only for the general identification of the vehicle and does not constitute a guarantee in the legal sense of purchase. You will receive the exact scope of equipment from our sales staff. Please contact us.

Condition: ready for operation (used), Year of construction: 1973, functionality: fully functional, machine/vehicle number: 162 026, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, table load: 15,000 kg, TECHNICAL DETAILS Travel range, X-axis: 3,000 mm Travel range, Y-axis: 2,000 mm Travel range, Z-axis: 1,250 mm Travel range, W-axis (spindle stroke): 700 mm Table size: 2,000 × 1,500 mm Chsdpfx Afez Ahabsgoc Table load capacity: 15,000 kg Table rotation: 360° Table indexing: 1° Spindle speed: 8–800 rpm MACHINE DETAILS Position measuring system: Heidenhain linear scales EQUIPMENT Heidenhain linear scales

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 980 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 8,000 rpm, spindle nose: ISO 50, number of spindles: 240, CNC MSX 701 III Travels (X/Y/Z axes): 900 / 800 / 980 mm Pallet working surface: 630 x 630 mm Pallet load capacity: 1,200 kg High-torque spindle max speed: 8,000 rpm Rapid traverse rate (X, Y, Z): 50 m/min Tool magazine capacity: 240 tools Spindle motor power (30 min / continuous): 37 / 30 kW Machine Configuration: 240-position RACK tool magazine Spindle taper DIN 69871 – ISO 50 Tool breakage detection in magazine Index table with 1° indexing FASTEMS interface, model MLS-MD Spindle speed 8,000 rpm – 37/30 kW TOOL IC SYSTEM BALLUFF interface No. 600 macro variables No. 1 load monitor No. 200 storable programs Cjdpoykpg Hefx Afgshc No. 512 tool life management No. 999 tool offsets No. 48 workpiece coordinate systems Data server + ATA card Mori Seiki scraper-type chip conveyor with drum filter MARPOSS application, model MIDA T25G, with E86N radio transmission system META pumping unit, model M 50/50, partial filtration system, 50 bar high pressure COMET drilled pallet Instruction manuals and CE Declaration of Conformity

Condition: used, TECHNICAL DETAILS - Number of axes : 10 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 10 [mm] - Max. machining length : 100 [mm] - Spindle speeds : 14000 [rpm] - Spindle power : 10.1 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 10 [mm] - Spindle speeds : 14000 [rpm] - Spindle power : 7 [kW] - C axis indexing precision : 0.001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 8 GUIDE BUSH HOLDER 2 - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 12000 [rpm] END ATTACHMENT - Number of positions : 3 - Number of motorized positions : 3 - Live tools speed : 12000 [rpm] SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 9000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1850X1140 [mm] - Machine height : 1800 [mm] - Machine weight : 1650 [kg] MACHINE HOURS - Number of working hours : 31340 [h] EQUIPMENT - CNC : Fanuc 31i-B5 - Interface : Ethernet / RS232 / USB / PCMCIA - 3 colors status lamp - Rotating tool motor on : S2,S3,S5 Cedpfxez Hqr Ee Afgshc - Rotating guide bush - Parts catcher - Ejection of workpiece - Coolant tank * with high-pressure pump : HP MÜLLER CL2 80 [bars] - Bar loader : IEMCA ELITE 112/33 - Oil mist extractor : ELBARON - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, CNC Fanuc 18i - MB TRAVELS: X axis: mm 850 Y axis: mm 700 Z axis: mm 750 Distance from spindle center to pallet top: mm 50 - 750 Distance from spindle nose to table center: mm 150 - 900 TABLE: Pallet size: mm 500 x 500 Pallet loading capacity: kg 500 Pallet surface: 24 – M16 x P 2.0 Pallet index degree: deg 1 SPINDLE: Max spindle speed: Rpm 14.000 Spindle taper: ISO 40 Max spindle torque (25% ED): Nm 220,5 FEEDRATE: Rapid traverse rate (X, Y, Z): m/min 60 Cutting feedrate: mm/min 30.000 AUTOMATIC TOOL CHANGER: Type of tool shank: MAS403 BT40 Tool storage capacity: 120 Max tool length: mm 400 Max tool weight: kg 10 Method of tool selection: Fixed address Tool change time (tool-to-tool): sec 1 Cedevw Uyujpfx Afgehc Tool change time (chip-to-chip): sec 3,5 AUTOMATIC PALLET CHANGER: Number of pallet: 7 Type: Rotary shuttle Pallet change time: sec 7,5 Pallet rotation in loading station: deg 90 MOTOR: Spindle motor (30 min): kW 18,5 / 22 Feed motor (X, Y, Z, B): kW 7,0/7,0/7,0/2,7 MACHINE SIZE: Machine height: mm 3.000 Machine dimension: mm 5.600 x 2.700 Machine weight: kg 15.000 Machine equipped with: • High pressure through the spindle 35 bar • Chip conveyor • Instruction manuals and CE declaration

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, position of the milling head: Schwenkbar (45°), table diameter: 4,000 mm, total length: 13,300 mm, gear diameter: 5,000 mm, total height: 5,700 mm, total width: 7,500 mm, input frequency: 50 Hz, workpiece diameter (max.): 5,000 mm, type of input current: three-phase, milling length: 600 mm, spindle speed (max.): 125 rpm, spindle speed (min.): 10 rpm, travel distance X-axis: 2,750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 1,750 mm, overall weight: 115,000 kg, distance table to spindle center: 3,300 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, The ZFWZ 5000 originates from Modul's Chemnitz gear machining division and is completely overhauled and delivered with a Siemens Sinumerik ONE control system by Serwema Retrofit Solutions, the company that houses the Modul drawing archive. Proven kinematics, new electrical system, new drives, new safety technology: you get the performance of a new machine at a fraction of the price and with a delivery time of twelve months. Chedpoz Etmpjfx Afgjc The machine mills external gears, both straight-toothed and helical, up to a module of 40 in hobbing and up to a module of 50 in single-indexing. With the internal milling attachment, internal gears are produced for gear rings of large roller bearings, rotary couplings, and planetary hollow gears, as used in wind power, mining, crane, and shipbuilding technology. Workpieces up to 5000 mm in diameter can be accommodated on the 4000 mm table, the milling head pivots by ±45°, and the 82 kW drive power at the milling head allows for roughing with high chip volume as well as finishing with precision. Technical data: max. workpiece diameter 5000 mm, table diameter 4000 mm, distance from milling spindle axis to table axis 300–1800 mm, distance from milling spindle axis to table surface 550–3300 mm, max. milling cutter diameter 500 mm, max. milling cutter length 600 mm, tangential travel 600 mm, milling cutter speed 10–125 rpm, drive power of milling head 82 kW, swivel angle ±45°. Installation dimensions approx. 13.3 × 7.5 × 5.7 m, weight approx. 115 t. The machine is delivered with a new Siemens Sinumerik ONE control system and Sinamics S120 drives, the latest Siemens generation with full availability of spare parts and support, in an air-conditioned switch cabinet of our own manufacture. The user-friendly interface makes setup and programming possible without in-depth G-code knowledge. The geometry acceptance is carried out according to the manufacturer's standard or DIN, with a protocol, jointly with you in Chemnitz. The scope of delivery also includes a machine safety fence with state-of-the-art safety technology, a new paint finish in RAL 5015/7035, a magnetic chip conveyor, circulation and loss lubrication, a hydraulic unit, a coolant system, and the operating manual.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, CNC Fanuc 180i-TB WORKING CAPACITY Max workable diameter: 680 mm Max workable diameter on X guide: 565 mm Max turning diameter: 324 mm Max turning length: 600 mm SPINDLE Spindle nose diameter (flat flange): 170 h5 mm Spindle bore: 79 mm Max bar diameter: 65 mm Chuck diameter: 200 / 250 mm Drive power 100% ED: 25 kW Speed range: 5,000 rpm Max torque S1 100% ED: 270 Nm Peak speed: 900 rpm C AXIS Speed: 250 rpm Holding torque: 200 Nm Indexing accuracy: 0.025° TOOL TURRET Number of tool stations: 12 Tool holder interface (cylindrical shank) VDI 69880: 40 mm Driven tools speed: 4,500 rpm TAILSTOCK Tailstock stroke: 580 mm Chsdpfsx H Nxcox Afgjc Tailstock force: 8 kN Tailstock taper: MK 5 Rapid traverse speed Z2: 6 m/min DIMENSIONS Machine dimensions: 4,350 x 2,460 x 2,080 mm Machine weight: 6,000 kg Machine complete with: No. 10 fixed tool holders Autoblok self-centering chuck Ø 250 mm Losma filtration system Operation and maintenance manuals and CE declaration

Condition: like new (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 18,000 mm, travel distance Y-axis: 5,000 mm, travel distance Z-axis: 1,750 mm, mount diameter: 220 mm, spindle speed (max.): 3,600 rpm, rotational speed (max.): 1,800 rpm, table load: 75,000 kg, coolant supply: 70 bar, spindle motor power: 1,000 W, workpiece weight (max.): 75,000 kg, feed length W-axis: 1,400 mm, MOBILE COLUMN BORING MACHINE WITH DOUBLE TABLE FPT INDUSTRIE SPIRIT 450 Technical specifications Type: Mobile column boring machine with double table Brand and model: FPT Spirit 450 CNC: Siemens Sinumerik 840D Installation: 2017 Technical data Axis travels: X: 18,000 mm Y: 5,000 mm Z: 1,750 mm W: 1,400 mm B: 360° V: 3,000 mm U: 400 mm Maximum workpiece dimensions: Dimensions of each table: 4,000 x 3,000 mm Maximum machinable height: 5,000 mm Maximum load capacity: 75 tons Positioning accuracy: 0.05 mm Spindle speed: Up to 3,600 rpm with TUPC-M head Normal speed: 1,800 rpm Spindle power: 100 kW Tool types: ISO 60 C.F. ISO 50 ISO 50 C.F. CAPTO C8 Boring bar diameter: Ø220 mm RAM: 650 x 560 mm Accessories and automation 2 rotary-movable tables with dimensions 4,000 x 3,000 mm each. Automatic tool changer for ISO 60 and ISO 50, via a storage and management system with a KUKA anthropomorphic robot. Manual tool changer for CAPTO C8 for the D’Andrea UT5 head. Measuring probe installed on the machine: SONDA PROBE RPM600 (RENISHAW). Coolant and lubrication system Internal and external cooling via cutting fluid: Internal cooling of the boring bar tool: Pressure: 70 bar Flow rate: 80 l/min Internal cooling of the head tools: Pressure: 40 bar Flow rate: 28 l/min External cooling of the tool: Pressure: 4 bar Flow rate: 28 l/min Internal and external air system for cooling the tool when cutting fluid cannot be used. Heads and accessories TU144: Universal roughing head ISO 50, with angular indexing every 2.5°. Maximum spindle speed: 1,800 rpm. TUPC: Universal finishing head ISO 50, with precise angular indexing. Maximum spindle speed: 1,800 rpm. TUPC-M: Universal multiplied finishing head ISO 50, with precise angular indexing. Maximum spindle speed: 3,600 rpm. D’Andrea UT5 head: Head for turning with CAPTO C8 tools. Maximum spindle speed: 251 rpm. ISO 60 spindle: Main spindle. Maximum speed: 1,800 rpm. ISO 50 reduction for finishing: Maximum speed: 1,800 rpm. ISO 50 reduction for roughing: Maximum speed: 1,800 rpm. Long ISO 50 reduction: Maximum speed: 1,800 rpm. Csdpfx Afoz Hl A Ejgohc PRICE AND FURTHER INFORMATION AVAILABLE UPON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEARING MACHINE, FOLDING MACHINE)

Condition: good (used), Year of construction: 2000, Punch press Chjdpfx Afsul S Eaogoc Manufacturer: EHT Type: Strippit 1500/30 Year of manufacture: 2000 CNC control: Fanuc Working area without repositioning: 2500 x 1500 mm Maximum material thickness: 8 mm Punching force: 30 tons Turret with 46 tool stations, including 4 indexing stations, size D 3 programmable clamps Metal table Used exclusively in single-shift operation Includes tools from WILSON TOOL 51026

Condition: ready for operation (used), Fibro EM 13.0280.8.122.08.0.0.3 rotary indexing table, serial number: 1656041/1 + Rehfuss FG691 planetary gearbox, serial number: 519035, used, normal signs of wear, 100% functional, scope of supply as shown in the photos. Codpfx Afoi D U Nysgohc

Condition: new, Heidenhain ERM 200C 2600 R20 A17 indexing drum. 391089-02, serial number as shown in the photo, unused, in sealed original packaging, 100% functional, scope of delivery as shown in the photos. Codpfx Aei Eahqjfgshc

Condition: used, Year of construction: 2008, Wire erosion / EDM Travel distance X: 600 mm Travel distance Y :400 mm Travel distance Z: 310 mm max. workpiece size X: 1050 mm max. workpiece size Y: 820 mm max. workpiece size Z: 300 mm max. workpiece weight: 1000 kg with AWF ( Automatic Wire Feeding ) U / V axis: 200 / 200 mm submerged cooling unit FANUC Series 310iS-WA5 control Automatic Wire Feeding (AWF) Chjdpfjz D U H Usx Afgjc Additional precision rotary/indexing unit by Detlev Hofmann 6 axes according to the machine control Chiller included Work area lighting Glass scales on X/Y axes Touch probe Work tank interlock and wire break detection Machine weight: approx. 3,000 kg Connected load: 13 kVA

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 3,000 rpm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 2,000 mm, controller manufacturer: HEIDENHAIN, controller model: 426, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Soraluce SP 8000 was manufactured in 2000. It features an impressive X-axis travel of 6,500 mm, Y-axis travel of 1,250 mm, and Z-axis travel of 2,000 mm. The machine is equipped with a high-torque spindle motor and a tool magazine capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the Soraluce SP 8000 universal machining centre we have for sale. Contact us for further details. • Max. feed rate: 15,000 mm/min • Guideways: Heavy-duty linear/roller guideways with linear scales • Milling head: Automatic Huré-type universal head, 2.5° x 2.5° automatic indexing on both bodies • Spindle: taper ISO 50 / SK 50 (DIN 69871); direct/gearbox-driven high-torque motor • Tool changer and magazine: ATC with 30-tool chain-type, column-mounted; supports heavy-duty tooling (weight/length per standard) • CNC control: Heidenhain iTNC 530 / TNC 640 or Siemens Sinumerik Additional equipment • Chip conveyor (longitudinal, between table and column) • Coolant system (external supply to tool/head) Cedpfxezumgko Afgshc • Enclosure (partial/perimeter protection) Technical Specification Taper Size ISO 50

Condition: used, Year of construction: 1999, Technical details: x-travel: 3 500 mm y-travel: 2 200 mm z-travel: 1 200 mm c-axis: +/- 200° control: Heidenhain TNC 426 spindle rpm - counter clockwise:: max. 10000 spindle rpm - clockwise:: max. 10000 distance between columns: 2 500 mm distance spindle /table: vertical: 1230 mm clamping surface area: Tisch: 3000 x 2000 mm table load: 10 t tool taper: HSK A 63 feed:: X/Y/Z: max. 20 m/min. compressed air: 8 bar total power requirement: ca. 100 kW weight of the machine ca.: 40 000 kg dimensions of machine: 18,0 x 6,0 x 5,8 m Chsdpju Nc Emjfx Afgsc 5 axis Portal Milling Machine 5-axis portal milling machine Milling spindle: make Hauser type HS 256A-01 Uni, speed max. 10.000 rpm. direct drive Milling head: make Hamül, fork type, A-axis integrated = angle of rotation +/- 110°. Tool changer: Hamül make, rotary indexing table type with rotary table, for 32 tool positions chip conveyor: 2 pieces hinged belt conveyor make DGS with water tank, insertion length 8.500mm make BKW type DL 55V-2KK, capacity 2,41 l/min.; (combined for oil- water mixture for oil and spindle cooling) Cooling lubricant system: belt filter make DGS type SBF 150 Operation: via control panel type Heidenhain LE 426 X-, Y- and Z-axis with Heidenhain measuring rods. manual control unit HR 410 hydraulic counterbalance (Z-axis) Equipment: Enclosure (protective walls with viewing windows and protective doors) hydraulic system working area lighting *