Used Hettich Laboratory Centrifuge for sale (2,304)

Year of construction: 1998, condition: used, coolant capacity 10 m3l/h Headroom 10 m operating pressure 2 bar voltage 420 V / 50 Hz motor speed 1430 U/min engine output 0,25 kW weight 10 kg normal priming centrifugal pump, Housing and impeller made of stainless steel, Ncjdpfouy U Syex Alnsu Flange connections, Ref. no. 22/98-118884

Year of construction: 2015, condition: excellent (used), coolant capacity 10 m3l/h Headroom 18 m operating pressure 2 bar voltage 230/400 V - 50 Hz motor type 80 L motor speed 2900 U/min engine output 1,1 kW weight 33 kg normal priming centrifugal pump, Ncsdpfx Aljub Ur Tonou Housing and impeller made of stainless steel, Flange connections, Ref. no. 22/98-118884

Year of construction: 2018, condition: good (used), coolant capacity 10 m3l/h Headroom 20 m operating pressure 2 bar voltage 230/400 V - 50 Hz motor speed 2900 U/min motor type 90 L engine output 2,2 kW weight 35 kg Nsdpfoub Utdjx Alnecu Standard suction centrifugal pump, Stainless steel housing and impeller, Flange connections, Serial No.: 22/04-140200

Condition: like new (used), Stainless steel centrifugal sieve machine, rotating sieve. Made entirely of stainless steel. Motor power: 2.2 kW, 695 rpm. Inlet: 250 x 250 mm. Basket diameter: 280 mm x 940 mm. Nsdpfswygakox Alnecu Outlet: 940 mm x 400 mm. Internal components are removable for cleaning. See also our other listings.

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw Nsdozdd Daspfx Alnocu A total of four dryers of this model are available.

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw Nsdpfx Alezddqmjnecu A total of four dryers of this model are available.

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw Nsdpfxjzdcxpe Alnscu

Condition: used, Year of construction: 2023, Atlas Copco ZE6D275-5VSD Centrifugal Air Compressor, 315kW, 690V, 1763rpm (Unused) Ncjdpfx Aszc Rglslnou Tag K1501S See Lot Details pdf file attachments section below for further information. Photos may feature items not included and should not be relied on. The description table/text describe the item(s) for sale in this lot.

Condition: new, Year of construction: 2025, Roller width 350 mm roll diameter 110 mm Roller covering - soft rubber 70 Grad shore rubber NBR - Qualität Pressure line 28 N / mm air pressure max. 4 bar Capacity of dye tub Becken - 1,3 Liter Capacity of dye tub Zwickel - 0,3 Liter Speed driven roll 0-25 U/min speed 1 - 10 m/min voltage 230 V / 50 Hz drive motor 0,4 kW weight 130 kg Ncsdpfeu Dn Uvjx Alnju dimensions 1050 x 800 x 810 mm • 2-Roll-laboratory padder for horizontal and vertical roller-arrangement. • The changing from horizontal to vertical roller arrangement can be effected by easy re-allocation of the upper squeezing roll with the pressure cylinders, • small trough for vertical roller-arrangement, • content: 1.3 litres, • with controllable motor drive, • direct drive to the fixed roll, • by means of wheels the pressure roll is driven when the nip is open.

Year of construction: 2018, condition: like new (used), functionality: fully functional, machine/vehicle number: M.66999.999.92, Take advantage of this unique opportunity to acquire an immediately available, like-new machine from the world-renowned premium manufacturer FRIMO. This is a fully assembled and 100% operational special machine for thermoforming/vacuum lamination, which, due to a cancelled project, never went into series production and is therefore in like-new condition. Machines of this type are often found in the premium automotive sector worldwide. One of the special features of this machine is its large forming area of up to 1,200 x 2,200 mm and its very flexible range of applications, due to its modular design and many special functions. Detailed description: Versatile ECO single-station laboratory machine or ECO single-station in-line machine for series production. Depending on the application, whether as a laboratory machine or for series production in in-line operation, and depending on the type of frame (fixed or adjustable frame), the maximum available forming area is defined. Forming areas: (with currently available frames) In-line operation: 810 x 2,205 mm (min. 465 x 490 mm) Single-station operation: 970 x 1,970 mm (min. forming area, linear: 465 x 490) With newly manufactured frame: Ncjdpfx Aezd Unbelneu Single-station frame, fixed: 1,200 x 2,200 mm & single-station frame, adjustable: 1,130 x 2,200 mm Linear frame, fixed: 1,200 x 2,200 mm & linear frame, adjustable: 900 x 2,200 mm Maximum lower tool or molded part height: 470 mm Maximum tool package height for installation with upper tool: 800 mm (821 mm) Maximum upper tool height: 650 mm Number of upper platens (molds and dies): 2 Machine equipment: - Movable heater - Chain rail for automatic film feed - Clamping frame or series frame can be used Different heaters available for interchangeable use, depending on requirements: - R5 0302 D vacuum pump (300 m3/h) - 1000 L vacuum tank - 6 cooling fans DNG 6-22.5 for accelerated cooling times (including cooling air with water cooling) - Maximum lifting capacity of lower and upper tools: 4,000 kg each 1.) IR heater (Ushio) 2.) Quartz heater (TQS) (Depending on the process and material, with its specific advantages) If you have any questions, please do not hesitate to contact us. Sincerely / Best regards i.V. Alexander Reizner Sales and Project Management Service FRIMO Innovative Technologies GmbH

Year of construction: 1971, condition: excellent (used), Manufacturer: SONNENBERG Type: FTM Nsdpfod Sdg Sjx Alnecu Year of manufacture: 1971 Dimensions: approx. W 1.00 x D 1.00 x H 1.50 m Weight: approx. 500 kg All information is subject to change without notice. The machine is in very good condition. A demonstration under power is possible at any time in our showroom.

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, clarifier separator, 11 kW, in excellent working condition, ready for operation. Ncsdpfozd Hffex Alnou

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, Manufacturer: RUMA Type: MZ 150-B700 Serial No.: 2150.354 Year of manufacture: 2007 Volumetric flow rates from 1 to 150 l/min Drive power: 4.0 kW (optional 5.5 kW) Rotor volume: 15.0 liters Solid matter filling volume: 10.0 liters Liquid purification with back pressure (0.7 bar) Ncsdpfx Alszdf Tcjneu Possible applications of the centrifuge: In this system, only liquids that do not pose a fire or explosion hazard may be used, and only substances in accordance with the DIN 6601 standard are permitted (DIN 6601: Resistance of materials of containers made of steel to liquids). For example:  Emulsions  Oils  Electrolytes  Grinding fluids  Media with a pH value between 5.5 and 9.5  The solids to be separated must be specifically heavier than the liquid. Operating manual available in German and English.

Condition: used, Used Flowserve type 350LNN725 centrifugal pump. Unit is rated 1,800 m3/hr at 37.4m head, 740 rpm. Unit rated 14.9 bar maximum pressure at -30 to 25 deg.c. temperature. Casing is cast austenitic stainless steel (ASTM A744 Gr, CF-8M), shaft is stainless steel (EN 10088 X2CrNiMo17-12-2) and impeller is cast austenitic stainless steel (ASTM A744 Gr, CF-8M). Unit driven by ABB electric motor rated 315kW, 744rpm. Unit is mounted on mild steel frame. Ncjdpfx Alozbugtonou

Condition: used, Used Flowserve type 600LNN975 centrifugal pump. Unit is rated 4,250 m3/hr at 33.5m head, 595 rpm. Unit rated 16 bar maximum pressure at -15 to 25 deg.c. temperature. Casing is carbon steel (A216 Gr. WCB), shaft is carbon steel (EN10083-C35E) and impeller is austenitic stainless steel casting alloy(A743 Gr. CF-8M). Unit driven by ABB electric motor rated 1000kW, 593rpm. Unit is mounted on mild steel frame. Ncsdpfozbuggjx Alnsu Additional information available upon request.

Condition: good (used), Item: D-7608-10APV-Pump ZMH3 Ncodshglryspfx Alnsu APV - Centrifugal pumps Brand: APV On stock: 3 pcs. Type: ZMH3 (HP3) Engine: 18,5 kW Inlet/Outlet 4"-3,5"

Condition: used, AZO GmbH E360 A2 AL screening machine, centrifugal screen Equipped with a dosing gate and cyclone Material: Aluminium/Steel Njdpfx Ajzc N A Eslnecu Optional: available with various spare parts Excluding electrical control 2 units in stock See our other listings VMA Wekerom

Condition: like new (used), Year of construction: 2024, operating hours: 7 h, functionality: fully functional, total height: 1,620 mm, total length: 1,760 mm, total width: 700 mm, type of input current: three-phase, tank capacity: 285 l, input voltage: 400 V, rotational speed (max.): 2,850 rpm, input frequency: 50 Hz, water tank capacity: 440 l, Water treatment and recycling unit for process water Z 800K HA TURBO FLOC – 2024 | Almost like new For sale, a professional water treatment and recycling unit for process water, model Z 800K HA TURBO FLOC. The system was manufactured in 2024 and has only been in operation for 7 hours, making it practically new. The unit is designed for effective treatment of process water and its subsequent reuse. Thanks to the use of a centrifuge and the Turbo-Floc flocculation system, it significantly reduces water consumption and operating costs for the plant. Technical specifications: treatment capacity up to 1200 l/h, system dimensions: 1760 × 700 × 1620 mm, centrifuge dimensions: 995 × 680 × 580 mm, drum rotation speed: 2850 rpm, RAL 7035 paint finish, automatic water removal from the centrifuge during braking, polyurethane sludge basket, electromagnetic safety valve. Buffer tank (285 l): made of HDPE plastic, equipped with a Turbo-Floc system for automatic dosing of coagulant or flocculant, additional filter on the inlet of process water, two float switches controlling the liquid level, pulsed power supply by P-3 pump. Clean water tank (440 l): made of HDPE polyethylene, supplies the devices with treated process water, equipped with an efficient P9 diaphragm pump: capacity 7.8 m³/h, working pressure 4 bar, water level control. Control and monitoring system: monitoring of filling and sludge basket replacement, timer relay and light signaling (flashing lamp), PLC controller E60-420, supply voltage 400 V / 50 Hz, control voltage 24 V DC, protection class IP54, operating temperature from +5°C to +40°C, safety feature that prevents the centrifuge from starting unless the cover is opened and closed beforehand. Additional equipment: DP1 dosing pump for coagulant supply, dosing capacity 0–1 l/h, Turbo-Floc flocculation mixer with mixing blades on both sides of the diagonal, special conical guide plates made of stainless steel, mounted inside the centrifuge. The unit is in excellent technical and visual condition. It is an ideal solution for industrial plants using vibration treatment, where effective water treatment and reuse are required. Year of manufacture: 2024 Operating hours: 7 Ncsdpfxjzcybrs Alnsu We invite you to contact us for more information and to arrange a demonstration of the unit.

Condition: used, Tall metal cabinet Width: 1150 mm Depth: 520 mm Height: 1750 mm Nodpfx Aloza Edyjnocu Weight: 90 kg Includes 3 shelves, doors lockable.

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, total length: 2,100 mm, total width: 730 mm, heating capacity: 7.5 kW (10.20 HP), screw conveyor diameter: 35 mm, machine/vehicle number: DE27307, TECHNICAL DETAILS Capacity: 30 – 80 kg/h Screw diameter: 2 x 35.0 mm L/D ratio: 20:1 Screw speed: 80 rpm Gearbox ratio: 12:1 Number of heating zones: 5 Heating power: 7,500 W Number of cooling fans: 5 Extruder discharge height: 1,150 mm MACHINE DETAILS Control system: Analog, contactor-controlled system Drive / Motor: 20 kW (DC) Cooling fan connection: 230 V Gearbox type: Lenze Njdpfx Aozargnslnocu Material: PE, PP, PS, ABS Design: Co-rotating, degassing, vacuum pump Dimensions (L x W): 2,100 x 730 mm Note: Water bath and granulator can be purchased for an additional charge.

Condition: used, Year of construction: 2008, workpiece weight (max.): 700 kg, INDUSTRIAL MARKEE 6-SPINDLE CENTRIFUGAL POLISHING MACHINE (2008) Industrial centrifugal polishing machine with 6 spindles, manufactured by INDUSTRIAL MARKEE SL (Spanish manufacturer), year 2008. From industrial company liquidation in Spain (insolvency proceedings) – not from a breakdown. ═════ SPECIFICATIONS ═════ - Manufacturer: INDUSTRIAL MARKEE SL (Spanish polishing equipment specialist) - Year of manufacture: 2008 - Type: Centrifugal polishing machine - Configuration: 6 spindles (heads) - Power supply: 380V three-phase, 50 Hz - Construction: Heavy-duty industrial steel frame - Multiple polishing heads working simultaneously - Designed for medium to high production runs ═════ APPLICATIONS ═════ Suitable for industrial polishing of: - Metal parts (steel, stainless steel, aluminum, brass, copper) Nodozcmgbopfx Alnjcu - Cutlery and tableware production - Tap fittings, valves, and brass components - Plumbing fittings (taps, faucets, fittings) - Cookware (pots, pans, kitchenware) - Architectural metal components - Decorative metal objects - Hardware and tool finishing The 6-spindle configuration allows simultaneous processing of multiple parts, ideal for medium production volumes. ═════ CONDITION ═════ - Used, from industrial closure (NOT from a breakdown) - Year 2008 (~17 years old) - structural condition good - Heavy-duty industrial construction designed for long-term use - Sold as-is, full inspection welcome before pickup - Polishing wheels/heads condition: variable, may need replacement (standard consumables, available worldwide) - Motor and bearings condition: to be verified during inspection - No original manual included ═════ ABOUT THE MANUFACTURER ═════ INDUSTRIAL MARKEE SL is a Spanish manufacturer specializing in polishing and finishing equipment. Spare parts and technical consultation are available through the local Spanish industry network. ═════ KEY ADVANTAGES ═════ ✓ Robust industrial construction ✓ Multi-spindle configuration (6 heads) for higher production output ✓ Heavy frame designed for stability during polishing ✓ Standard 380V industrial power supply ✓ Mechanically simple – easy to maintain and service ✓ Polishing consumables (wheels, compounds) widely available ═════ LOGISTICS & PURCHASE ═════ - Pickup location: Barcelona, Spain - Weight: approximately 500-700 kg - Dimensions: medium-large industrial machine - Loading: forklift required - Pallet or pre-packed for transport possible - Inspection welcome by appointment - Payment: 100% bank transfer in advance - Documents: commercial invoice, sold as-is - International shipping possible – buyer arranges transport - Container loading possible (LCL or FCL) ═════ COMPARATIVE VALUE ═════ A new equivalent 6-spindle centrifugal polishing machine in 2026 costs €15,000-25,000. This used unit offers similar production capability at a fraction of the cost.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, total height: 2,200 mm, total length: 1,700 mm, total width: 1,100 mm, rotational speed (max.): 2,650 rpm, power: 1.6 kW (2.18 HP), water tank capacity: 100 l, RÖSLER RZ 150 A cleaning system – automatic sludge removal For sale: a professional RZ 150 A cleaning system with automatic sludge removal. This unit is designed for industrial use, fully automated, and equipped with modern solutions to increase efficiency and durability. Key parameters: • Dimensions: 1700 x 1100 x 2200 mm • Power: 1.6 kW • Rotor speed: 2650 rpm • Rotor made of aluminum alloy • Steel housing Equipment and functions: • Smooth start and stop thanks to the frequency inverter • Adjustable sludge removal speed • Automatic retraction of the cleaning blade • Automatic removal of remaining water • Electronic vibration control • Automatic rotor flushing • Special bearing lubrication system to extend the unit's service life Central control unit E61-400: • Control and monitoring of the cleaning system • E61-400 control unit • SIEMENS S7-1200 controller • Ensures automatic and stable operation of the entire system Sludge removal time is adjustable from 2 to 5 minutes, depending on the consistency. A single cycle removes up to 25 kg of sludge. Additional system equipment: • Sandpiper P9 diaphragm pump for supplying water to the centrifuge • Pump operation cycle control • Water level control in the tank The set also includes a P 100 SB-P9 buffer tank for residual dirty water from the centrifuge. The tank is required if the centrifuge is located far from the source of dirty water. P 100 SB-P9 buffer tank: • Height: 700 mm • Capacity: 100 l • Designed for transporting dirty water and rotor flushing water to the buffer tank • Made of durable HDPE polyethylene (black color) • Sloping, 3-sided funnel-shaped bottom • P9 diaphragm pump – operating pressure 4 bar • Water level control RSKM 30 waste container: • Capacity: 300 l Nodpfozca Apjx Alnscu • Dimensions: 1300 x 820 x 800 mm • Manual operation • Can be transported and emptied using a forklift • Made of steel • Discharge port with drain plug • Equipped with a tilting mechanism The unit is robust, efficient, and ready for operation.

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, inner diameter: 365 mm, wall thickness: 10 mm, rotational speed (max.): 2,900 rpm, The GEA Westfalia Separator CA 365-03-00 is a high-performance, three-phase decanter designed for the efficient separation of liquids and solids. With a drum diameter of 354 mm and an extended drum length, this model offers optimized separation performance. DRUM AND HOUSING DESIGN The decanter drum is configured in a flat-cone design, enabling effective phase separation. The housing is manufactured in a standard design, facilitating integration into existing systems. LIQUID DISCHARGE Liquids are discharged with the light phase unpressurized and the heavy phase under pressure. This functionality ensures reliable and continuous removal of the separated phases. DRIVE TYPES Njdpsy H Ixuefx Alnocu The drum is driven via a belt drive, while the screw is driven by a gearbox. These drive types provide stable and efficient decanter operation. The GEA Westfalia Separator CA 365-03-00 provides a reliable solution for the separation of liquids and solids in various applications. plus GEA WESTFALIA SAMR 5036 CENTRIFUGE CLARIFIER FOR A COMPLETE LINE FOR OILS. The units can be sold separately or as a complete line. ?v=nv23KAJFewE

Year of construction: 1998, condition: ready for operation (used), Various old but fully functional measuring and testing devices from a grain laboratory are available. 1) Falling number tester Perten Falling Number 1402. 2) Sample cleaner A/S Rationel Kornservice Sample Cleaner MLN, weight: approx. 60kg. 3) Laboratory mill MIM 3100. 4) Hectoliter weight Louis Schopper with scale and weights. 5) Grain moisture meter Pfeuffer HOH Express HE 90, year of manufacture: 1998, measuring time: approx. 30s. 6) Laboratory mill Perten LM 3100. Documentation available. An on-site inspection is possible. Package sale preferred, however individual sale is possible. Ncsdpfey Ey Thsx Alnsu

Condition: used, radial fan 2.2kw 5500m3/h supply fan VanDIJK radial fan Ncsdpfsufiz Rox Alnou air transport approx. 5500m3 stainless steel impeller. plastic housing direct drive motor 2.2 kw 380/220v revolutions: 2830/min pressure side pipe diameter: 250mm suction side pipe 200mm