Used Engel Es 80/25 Hl for sale (38,905)

Condition: excellent (used), Year of construction: 1997, Engel ES 330/90 HL Year of manufacture: 1997 Hnodpfx Aioxt S Tyetsu Screw diameter: 35 mm

Condition: excellent (used), Year of construction: 2011, operating hours: 80,000 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 40 mm, displacement volume: 201 cm³, total length: 5,245 mm, total width: 1,525 mm, total height: 2,300 mm, overall weight: 7,200 kg, input frequency: 50 Hz, input voltage: 400 V, The machine comes from the current series production of a plastics processor and, according to the previous owner, is fully functional. An inspection at the production facility is possible after scheduling an appointment. Key data (according to manufacturer's specifications ENGEL) • Clamping force 1,200 kN (120 t), tie-barless clamping unit • Platen dimensions 790 × 790 mm (Wide Platen), minimum tool size 350 × 350 mm • Tool installation height min. 400 mm, opening stroke 506 mm, max. platen distance 900 mm • Ejector 130 mm stroke, 39.8 kN • Injection unit 1 (330H, horizontal): screw Ø 40 mm, displacement volume 201 cm³, specific injection pressure 1,221 bar / increased 1,667 bar • Injection unit 2 (80W, angled position): displacement volume 38 cm³ (screw Ø 22 mm) or 49 cm³ (Ø 25 mm) [CHECK 09/25: which screw] • Hydraulics: pump drive 30 kW, oil capacity 300 l • Connection 3 × 400 V, 50 Hz, 139 kW / 220 A • Control system ENGEL CC 200 [CHECK 09/25] • Operating hours 87,300 h (as of 09/2026); plasticizing cylinder Ø 40 mm from 2021 with 20,300 h (according to the previous owner) Your advantages • Tie-barless: The tool space is free from tie bars. Large and bulky tools with core pulls can be accommodated, for which a larger clamping force class would often be required in tie-bar machines. • Short setup times: Tools are installed from the side without tie-bar removal. • Automation: Robots travel horizontally into the tool space – smaller cell, lower hall height, shorter cycles. • Tool-friendly: Platen parallelism via the patented ENGEL Flex-Link system (according to the manufacturer). • Hydraulic connections for core pulls, parallel movements programmable (according to the previous owner) – for tools with sliders, undercuts and thread cores. • Combi version with space for a rotary table or indexing plate (according to the manufacturer). • Main injection unit with a newer plasticizing cylinder (2021). • Second injection unit, according to the previous owner, was not used in operation, therefore minimal wear. [CHECK 09/25: unit available + free injection test] Typical applications 2K hard/soft and two-color: handles with TPE zone, housings with molded-in seal, switches and operating elements, connectors with seal, rollers with soft tread, closures with sealing lip, cable glands, medical components, two-color design parts. Single-component: technical precision parts and parts with inserts. Scope of supply • Injection molding machine as described [CHECK 09/25: with both injection units] • ENGEL data sheet, layout plan, platen drawing Not included in the scope of supply: the peripherals visible in the photos (removal/automation with protective enclosure, temperature control units, material handling and drying, mobile switch cabinet) and tools. Hnsdpfx Aioz Eimfjtsu Terms and conditions • Price on request • Available presumably from week 48/2026 • Payment 100% advance payment • Transport throughout Europe on request Note: The technical specifications are based on the manufacturer's documentation and the information provided by the previous owner. They are for informational purposes only and do not constitute an agreement on the condition or a warranty within the meaning of §§ 434, 443 BGB. We will confirm individual values during the inspection or upon request. Offer subject to change, prior sale reserved.

Condition: good (used), Year of construction: 2005, operating hours: 76,988 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 99 cm³, plate length: 600 mm, plate height: 670 mm, total length: 4,050 mm, total width: 1,930 mm, total height: 2,200 mm, overall weight: 5,200 kg, Equipment: documentation/manual, ENGEL Victory 200/80 Tech Stock No.: 503561 Manufacturer: ENGEL Type: VICTORY 200-80 Tech Control System: CC100 Year of Manufacture: 2005 Operating Hours: 76988 h Technical Data - Clamping Side Clamping Force: 800 kN Platen Size h x v: 670 x 600 mm Minimum Mold Height: 250 mm Maximum Mold Height: 700 mm Opening Stroke: 450 mm Ejector Stroke: 100 mm Ejector Force: 40 kN Centering of Moving Platen D: 125 mm Centering of Fixed Platen D: 125 mm Tool Weight: 675 kg Technical Data - Injection Side Screw Diameter: 30 mm Injection Volume: 99 ccm Injection Pressure: 1450 bar Screw Length: 20 l/d Screw Stroke: 140 mm Plasticizing Rate: 17 g/s PS Free Injection Flow Rate: 150 g/s PS Number of Heating Zones: 4 Nozzle Length: 200 mm Dimensions & Weight Machine Dimensions L x W x H: 4.05m x 1.93m x 2.2m Total Weight: 5200 kg Equipment Screen text: German CEE socket 16A Hodpfx Aisz Ayttjtenu Core pull hydraulically 1x Machine including conveyor belt Machine including handling system Machine with water manifold Machine without material hopper Leveling elements Schuko socket 10A Technical Data - Handling System Machine Type: Linear handling system Manufacturer: Engel Control System: ER-HLI 31 VC Year of Manufacture: 2005 Handling System Weight: 2 kg Screen Text: German Total Weight: 250 kg

Condition: excellent (used), Year of construction: 1999, Engel ES 1050/175 HL-V, clamping force 175 tons, year 1999, screw diameter 55 mm, injection volume 510 cm³, shot weight 459 g, enlarged clamping platen 820x750, CC100 control system. Hjdpjxu Rkysfx Aitonu

Condition: excellent (used), Year of construction: 2002, Engel ES 750/300 HL Hsdpoxvm Scofx Aitonu Year of manufacture: 2002 Screw diameter: 55 mm Clamping force: 300 tons

Condition: excellent (used), Year of construction: 2006, operating hours: 69,000 h, functionality: fully functional, machine/vehicle number: 163769, Here we offer a permanent maintained injection molding machine. from the following machine we have other machines of the same type and same year in stock also with Geiger Robot Manufacturer Engel Type Victory 200/80 Tech year of construction: 2006 Control system: CC 200 Extras -installed Languages: German Englisch -25 mm (wear and corrosion protected) - control CC200 - enlarged clamping plates (B plates) - minimum installation height 250 mm Hnodpjm Nclvefx Aitou - maximum platen distance 700 mm - quality switch / PD protocol + graphics - 5 x CEE 400 V / 3 x Schuko 230 V - 4 freely programmable inputs and outputs - handling interface Euromap 12 - Host computer interface Engel EMS - Geiger EA Mini 2001 SLI (#156686 0504 4417 / year 2005) - without material hopper or conveyor Clamping unit clamping force: 80 to./ 800 kN tie bar dimension: tie bar-less clamping platens: 730 x 600 (hxv) platen distance: 700 mm max installation height: 250 mm min. opening stroke: 450 mm Injection unit screw diameter 25 mm stroke volume: 69 ccm injection pressure: 2090 bar / 2400 increased Weight: 5,200 kg. dimensions: 4,00 mtr. x 1,40 mtr. x 2,00 mtr LxWxH from our warehouse Hannover /Germany free loading on truck of the buyer or free delivery against freight reimbursement Viewing under electric power possible functional guarantee

Condition: used, Year of construction: 2024, MACHINE PROFILE: 3,800 kN (420 US tons) IMM ===== Machine ID: • Injection Unit: 265 • Clamping Unit: 380 • Weight: 21,300 kg Clamping Unit Specifications: • Force: 3800 kN (388 tons / 420 US tons) • Tie-bar Spacing: 830x830 mm • Platen Size: 1190x1190 mm • Stroke (Open/Eject): 700 / 210 mm • Ejector Force: 90 kN • Mold Height (Min/Max): 300 / 750 mm (+800 option) • Max Mold Weight: 3.8 tons • Dry Cycle: 2.3s / 500mm Injection Unit Specifications (By Screw: 25 / 30 / 35 mm): • L/D Ratio: 24 / 24 / 20 • Capacity: 74 / 106 / 144 cm³ • Rate: 98 / 141 / 192 cm³/s • Recovery Rate: 10 / 15 / 22 g/s • Pressure: 2700 / 2700 / 2000 bar • Stroke / Speed: 150 mm / 420 rpm • Nozzle (Stroke/Force): 305 mm / 40 kN Hsdpfx Aijzzv Tgjtjnu • Heating Capacity: 9.2 kW

Condition: used, Year of construction: 2010, Technical details: pressure: 80 t chamfer lenght: 2500 mm distance between columns: 2125 mm max. ram stroke: 200 mm plate thickness: 6 mm total power requirement: 9 kW operating pressure: 275 bar throat: 420 mm ajustment speed: 100 mm/s working feed: 10 mm/s Hnsdszpaqfepfx Aitju weight of the machine ca.: 5,8 t dimensions of the machine ca.: 3,8 x 2,4 x 2,95 m NC pressbrake, controlled axis: Y1, Y2, X1, R with toolcabinet incl. accessories, barely used! *

Condition: repair required (used), Year of construction: 1999, operating hours: 33,400 h, functionality: limited functionality, machine/vehicle number: 70185/300/99, screw diameter: 45 mm, injection pressure: 2,038 bar, total length: 7,200 mm, total width: 2,000 mm, total height: 2,500 mm, overall weight: 22,000 kg, For sale is an ENGEL ES650/330/300 TL injection molding machine in a C-frame design. The machine is ideal for repair, modernization, or as a source of spare parts. Technical data: Manufacturer: ENGEL Type: ES650/330/300 TL Year of manufacture: 1999 Machine number: 70185-300-99 Clamping force: 3,000 kN Design: C-frame 1 horizontal injection unit Screw diameter: 45 mm Injection volume: 292 cc Injection pressure: 2,038 bar Max. injection temperature: 450 °C Min. tool mounting height: 400 mm Hjdpfjzrngyex Aitonu Max. distance between mounting platens: 1,300 mm Ejector stroke: 200 mm 3 hydraulic core pulls Dimensions and weight: Length: 7.20 m Width: 2.00 m Height: 2.50 m Total weight: approx. 22,000 kg Connection values: Pump drive power: 37 kW + 11 kW Heating power: 15.3 kW + 9.2 kW Fuse rating: 250 A Condition The machine is generally functional but requires repair or maintenance. An inspection of the machine is strongly recommended. Further information on the condition can be provided upon request. Sale Location: [Insert location] Inspection possible by appointment Sale from the location Please contact us for further information, images, or to arrange an inspection.

Condition: ready for operation (used), Year of construction: 1998, Engel ES 330/80 HL .ST Closing 80 tons Year 1998 Hnsdpfx Ajvcrqnsitsu Scrow 35 mm Spray softened 140 g

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 7814-0045, total length: 4,000 mm, total width: 1,500 mm, total height: 2,000 mm, Weight approximately 3000 kg For sale is a used machine from a site closure. Sale is made excluding any warranty for defects. Hsdezqam Aepfx Aitsnu The machine has not been inspected but was operational until the very end.

Condition: ready for operation (used), Year of construction: 1986, Engel ES 80/35 ST Closing 35 tons Hodpfx Aietwmv Sjtsnu Year 1986 Scrow 22mm EC 88

Condition: used, Year of construction: 2023, 2 x Engel VC 2460/180 injection molding machines, technical version, manufactured in 2023. Hnsdpfx Aszhudkjitju

Condition: used, Year of construction: 2004, Victory 330/80 PLUS Year: 2004 Serial No.: 52863 Operating hours: 103,000 Screw: D40 CC200 A01 4-circuit water cooling 1x core pull 4x digital input, 4x digital output Few sockets ROBOT: TecnoMatic Micro 210/0184 Year: 2021 Hjdpfxjzcaxds Aitonu Load: 3 kg X-Y-Z – servo C – pneumatic

Condition: excellent (used), Year of construction: 2009, operating hours: 70,171 h, functionality: fully functional, clamping force: 900 kN, screw diameter: 22 mm, displacement volume: 38 cm³, total length: 4,400 mm, total width: 1,500 mm, total height: 2,000 mm, overall weight: 6,700 kg, Equipment: documentation/manual, ENGEL VICTORY 80-90 tech Stock No.: 503415 Manufacturer: ENGEL Type: VICTORY 80-90 tech Control: CC200 Year of manufacture: 2009 Operating hours: 70,171 h Technical Data – Clamping Unit Clamping force: 900 kN Platen size (HxV): 740 x 680 mm Minimum mould height: 300 mm Max platen daylight: 800 mm Opening stroke: 500 mm Ejector stroke: 130 mm Ejector force: 40 kN Movable platen centering diameter: 125 mm Fixed platen centering diameter: 125 mm Technical Data – Injection Unit Screw diameter: 22 mm Shot volume: 38 ccm Injection pressure: 2,060 bar Screw L/D ratio: 19 l/d Screw stroke: 100 mm Screw speed: 360 min⁻¹ Free flow rate: 78 g/s PS Number of heating zones: 4 Nozzle stroke: 230 mm Dimensions & Weight Machine dimensions (LxWxH): 4.4 m x 1.5 m x 2 m Total weight: 6,700 kg Equipment Display language: German Hodpfjz A A T Tsx Aitsnu CEE socket 16A 1x hydraulic core pull 2x air valves Machine with water battery Machine without material hopper Levelling elements Schuko socket 10A 4x mould heating circuits

Condition: good (used), Year of construction: 1996, Engel ES 330H200V/125 HL – 2F Hnedpfx Aolu Hkijitsu Clamping force: 125 tons Tie bar diameter: 35 mm Tie bar diameter: 30 mm Injection volume: 158 cm³ 98 cm³ Year of manufacture: 1996 Enlarged clamping plate: 740 x 700 Minimum tool installation height: 350 mm Plus rotary platen

Condition: ready for operation (used), Year of construction: 1999, pressure 80.0 t chamfer lenght 2570 mm distance between columns 2125 mm column arm 420 mm table width 60.0 mm ajustment speed 100 mm/sec Hedoyyc Dfspfx Aitenu working feed 10.0 mm/sec return speed 100 mm/sec stroke 200 mm dayligth 470 mm table height 960 mm Number of working hours ~ 33.100 h oil volume 90.0 l total power requirement 9.0 KW weight of the machine ca. 5750 kg. range L-W-H 3630 x 2450 x 2550 mm - in checked conditions - machinevideo - ?v=SskqZJdQxsQ ?v=KcKjibwWAKI Equipment: - AMADA CNC control, model OPERATEUR II * Manual control for fine adjustment of the axes - CNC control OPERATEUR 2 in 8 axes (X1 X2,Y1 Y2,R1 R2,Z1 Z2) - CNC-controlled backgauge adjustment (X1 X2) - CNC-controlled vertical adjustment of the fence fingers (R1 R2) - CNC-controlled adjustment of the stop fingers left-right (Z1 Z2) - Swivel operation, front left - 1x freely movable foot switch - Top tool holder with top wedge crowning (AMADA system) - Rear safety guard (safety grid) - Side safety guard (safety doors) - CE marking - Original operating instructions * Further technical data : Adjustment range : X axis ... 700 mm X axis with workpiece in place ... 1020 mm R axis .. 250 mm Adjustment speed : X axis .. 500 mm/sec R axis ... 160 mm/sec Z1 Z2 axis .. 1000 mm/sec Positioning accuracy ± in mm : X axis .. 0.1 R axis .. 0.1 Z axis .. 1.0

Condition: excellent (used), Year of construction: 2015, clamping force: 9,000 kN, Equipment: documentation/manual, *ENGEL DUO 1800H/1800M/900 WP 2FCLS – Combi-M (2K)* Year of manufacture: 2015 Control system: CC300 Clamping force: 9,000 kN (900 t) QMC system: Bolt Hole _— Clamp Unit —_ Min. mould height: 1,300 mm Max. mould height: 2,100 mm Hnedpfez Az Iajx Aitsu Platen size (H × V): 1,850 × 1,810 mm Tie-bar spacing (H × V): 1,420 × 1,170 mm Opening stroke: 1,800 mm Location ring – fixed platen: Ø 250 mm Location ring – moving platen: Ø 250 mm Max. total tool weight: 21,000 kg _— Injection Unit 1 —_ L/D ratio: 20 Screw diameter: Ø 60 mm Barrel volume: 763 cm³ Injection rate: 317 cm³/s Max. hydraulic pressure: 180 bar Max. specific pressure: 1,960 bar Screw stroke: 270 mm Max. screw rotation: 253 RPM _— Injection Unit 2 —_ L/D ratio: 20 Screw diameter: Ø 60 mm Barrel volume: 763 cm³ Injection rate: 317 cm³/s Max. hydraulic pressure: 184 bar Max. specific pressure: 1,960 bar Screw stroke: 270 mm Max. screw rotation: 253 RPM _— Mould / Peripherals —_ Fixed platen cores: 1 Moving platen cores: 1 + 4 on rotary table Sequential valve-gate control (cascade): 16 circuits 8 Hot runner control: 48 zones Robot VIPER 40 Laser Conveyor Belt

Condition: reconditioned (used), Year of construction: 2004, Engel 2-shot injection molding machine (horizontal and vertical) 80 tons clamping force also for moulds INDEX. Year 2004, approx. 58.000 hours. This machine will be delivered re-conditioned (Full checked tested and operative) Ask us about our service of Start up. Technical details CLAMPING FORCE 800 kN YEAR OF BUILDING 2004 WORKING HOURS 58.332 SCREW DIAMETER 18 mm horizontal SCREW DIAMETER 30 mm vertical TRAVEL OPENING 457mm INJECTION PRESSURE 2207 BAR (horizontal) INJECTION PRESSURE 1451BAR (vertical) Hedpfx Aijp At Udetenu INJECTION VOLUMEN 26cm3 (horizontal) INJECTION VOLUMEN 99cm3 (vertical)

Condition: used, machine/vehicle number: 13275, Rotor diameter: 800 mm Rotor width: 600 mm Rotor knives: 7 Hjdjyr Tv Uepfx Aitenu Stator knives: 3 Feed opening approx. 800 x 580 mm Drive motor: 110 kW For pipes and profiles up to 6 meters in length.

Condition: ready for operation (used), Year of construction: 1999, clamping force: 1,100 kN, screw diameter: 150 mm, total width: 1,400 mm, total height: 1,150 mm, overall weight: 77,000 kg, Hydraulic injection moulding machine manufactured in 1999. This Engel ES 16050/1100 DUO features a clamping force of 1100 T and a screw diameter of 150 mm. It has an opening stroke of 1800 mm and a total weight of 77,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel ES 16050/1100 DUO machine we have for sale. Contact us for further details. • Working hours: 86,200 h • Column diameter: 230 mm • Displacement: 10,955 cm³ • Injection pressure: 1330 bar • Ejection force: 215 N • Opening stroke: 1800 mm Hjdpfxeyuc Urj Aitenu • Heating capacity: 113 kW (153.64 hp)

Condition: good (used), Year of construction: 2004, VC330-80 plus Year: 2004 Clamping force : 800kn Injection Unit 330 Hnjdpfx Ajvdqbhsitsu Control unit CC200 A01 Screw D40 Working hours 91112 1x corepull 4x digital input 4x digital output 1x signe pahse socket 1x trhee phase socket NEW PUMP

Condition: used, Used Mario Riboldi Press Brake Model: HL 150/80 Description: • Mario Riboldi hydraulic press brake, ideal for medium to heavy metal fabrication work. Technical Data: Hnsdpfx Aisx Sxymstsu • Bending force: 150 tons • Useful working length: 8,050 mm

Condition: ready for operation (used), Year of construction: 2007, operating hours: 101,500 h, clamping force: 3,000 kN, overall weight: 19,700 kg, Hydraulic injection moulding machine manufactured in 2007. This Engel Victory VC1800/300 P features a clamping force of 3,000 kN and an opening stroke of 900 mm. It includes a robust control system with a 15" TFT touchscreen and a maximum injection pressure of 1,735 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory VC1800/300 P machine we have for sale. Contact us for further details. Hedeyn Ntzopfx Aitenu Identical Engel Victory VC 1800/300P (2008 model) also for sale — same configurations. • Power supply: 3 x 400 V + N + PE / 50 Hz • Control system: ENGEL CC200 A02 (15" TFT touchscreen) • Opening stroke: 900 mm • Maximum platen distance: 1,500 mm • Minimum mould installation height: 600 mm • Ejector stroke: 200 mm • Ejector force: 90 kN • Pump drive power: 37 kW • Injection unit version: M3 • Available screw diameters: 60 / 70 / 80 mm • Screw diameter installed: 70 mm • Maximum swept volume (70 mm): 1,039 cm³ • Maximum screw speed: 226 rpm • Injection rate (70 mm): 385 cm³/s • Specific injection pressure (70 mm): 1,442 bar • Maximum injection pressure (increased): 1,735 bar • Nozzle stroke: 500 mm • Nozzle contact force: 110 kN • Hours: 101,500 h • Maintenance/Service history: • Complete hydraulic hose replacement in 2025 • Motor and planetary gearbox replacement in 2021 • High-pressure cylinder replacement in 2020 • Several cost-intensive main components renewed in recent years Additional equipment • Robot: ENGEL ERC 64 (included) • Axes travel: X 1,200 mm, Y 1,300 mm, Z 3,600 mm • B-axis rotation: -90° to +270° • Vacuum circuits: 4 • Pneumatic circuits: 8 • Reject/quality conveyor belt • Box transfer for 600 x 400 x 250 mm boxes • GWK temperature control tower (optional)

Condition: ready for operation (used), Year of construction: 1999, Engel ES 200/60HL ST Hjdsvlangepfx Aitenu Closing 60 TO Year 1999 Scrow 30 mm Enlarged clamping plate 660x560