Used Drilling Line for sale (14,617)

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Hsdpfstiy Ntex Acnjt Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Condition: like new (used), Range (depending on lighting conditions): up to 15 m Range with laser receiver: 30 m and more Leveling accuracy at 5 m: +/- 1 mm Hjdpsd Ecncefx Acnjt Self-leveling range: 4° +- 0.5° Accuracy of the horizontal line at 5 m: +- 1.5 mm Accuracy of the vertical line at 3 m: +- 0.75 mm Number of laser lines: 2 Weight: 485 g

Condition: excellent (used), 1x Tromp line. Hybrid Line with Rondo dual servo guilllotine, capable of 200 cuts/hr or 80 stamps/min. Comprising of main line pastry cutting marking discs, burgess calibrator with 2 flour dusters, rondo marker, cutter unit, hand crimped cutter and sensor, tromp depositor with stairs, rondo guillotine and cutters and dockers, portable scrap pastry unit, wire belt take off conveyor, 3 chain take off conveyor, hugging conveyor, topping machine with stand, 6 lane forming box, product divider, 2 off drum pastry cutters (foils) 1 off marker unit (chevron) Main panel Tromp (office), Main Panel Rondo, HMI Panel Tromp, HMI panel rondo, 3 off single step stands. Hodpfx Ajy Enwhscnjt

Condition: used, Year of construction: 2006, This is an in-line Tub Filler for yoghurts and desserts for catering purposes. The filling volumes are 1-5 kg per tub. This machine was used for a high end customer with the ability of meeting all quality and health and safety standards. Capacity : 5000 kg per hour Sealing: Film roll with sealing and cutting device as well as roll to manage the excess material Stations: Tub dispenser > Filling > Sealing > Lid applicator > Date printing > outlet conveyor Protection: Fully enclosed cabin Condition: Good Available: Immediately Hsdpfeynrzbox Acnet

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 2124, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,375 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 4,000 rpm, 5-axis machine Pallet size: 800 × 800 mm Automatic workpiece change: 5 pallets CNC control: FANUC 15M Spindle: 22 kW – 4000 rpm, FANUC Axis motor (20 m/min) + drive: FANUC Tool magazine: 118 tools, type 50, DIN 69871 Hsdpfx Acsyzxyxsnst

Condition: excellent (used), Year of construction: 2018, Stork / Marel AMF Filleting Line AMF-i Professional Chicken Breast Filleting Line – High Efficiency and Precision We offer a complete Marel / Stork AMF-i filleting line, tailored for modern poultry processing plants. This system provides automatic and precise filleting of chicken breasts while ensuring maximum throughput and superior end-product quality. Key Benefits: Intelligent Filleting (Adaptive Filleting) The system automatically adjusts its settings to the size of the raw material, guaranteeing high-quality results and optimal yield regardless of product dimensions. High Production Efficiency Processes up to approximately 60 fillets per minute – an ideal solution for large-scale operations. Consistent Quality and Maximum Yield Losses are minimized, and efficient recovery of by-products (tendons, skin, meat) is ensured. Modular Design The line can be configured and expanded to meet individual production requirements. Hsdex Hymdepfx Acnst Process Automation Manual labor is significantly reduced, increasing consistency and process repeatability. Included Components: - Loader module - Filleting line with integrated measuring system (encoder) - Skinning module - Splitting module with automatic adjustment - Separation module - Tendon collection system - Original control cabinet Technical Specifications: Model: AMF-i Manufacturer: Stork / Marel Year of Manufacture: 2018 Capacity: up to 3,600 fillets/hour Condition: Very good / ready for operation Type: Chicken breast filleting line STORK / MAREL / AMF / FILLETING LINE / CHICKEN BREAST

Condition: excellent (used), ELOPAK SHIKOKU ASEPTIC FILLING LINE Model S-PS80HA YOM 2008 Working hours - 9,000 hours. Line capacity for 3 streams - 8100 pcs./h, for two 7100 pcs./h for one 6000 pcs./h Carton format: 500ml, 750ml, 1000ml Hsdpfx Aoxdbwijcnet The line includes: - Elopak filler S-PS80HA for Pure Pak classic packaging material - 3 units of PURE-PACK PLA-S30 cap applicators for Pure-Twist 2U cap - WA-Flex-30 packer - Conveyor system. - Conveyor lubrication station. - Spare parts a total of 4,000 dollars.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, operating hours: 24 h, I am selling full complete onion peeling processing line with M&P onion peelers, items are listed below: -6x M & P onion peeler machine -all conveyers, elevators for transport peeled, unpeeled and waste product -inspection table -all working platforms Hodpotzmifefx Acnst -all hoppers for row (unpeeled materials) Excluded air screw compressors but for serious enquire i could help out with additional equipment. Capacity 2700- 4500 kg /h of peeled onion

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Complete beer canning line for beer (standard 330 and 500 ml can): 10 000 cans per hour (500ml), fully optimized and calibrated. Only 4 machine operators/workers in filling process. The offer includes: Depalletization, rinser, filles, seamer, RTG level inspection, dryer, carton machine, palletization, CIP, flas pasteurization Padovan, HGB,chiller, compressor etc. Hsdpfsuq Sb Sjx Acnjt

Condition: used, Year of construction: 2006, functionality: fully functional, Complete briquetting line 2 x RUF 330. Boiler room, drum dryer, conveyors. Hjdpfoxazhtox Acnst

Condition: used, Year of construction: 1982, Used cut-to-length line FIMI 1250×0.12-0.8mm x16t with two packing stations (A3793) is coil metal processing line to cut metal into sheets with required sizes. Such machine can be good solution for metal coil processing companies. Manufacturer : FIMI – Italy Year of manufacture : 1982 Revamping : 2008 (SEI SISTEMI) and 2019 (SEI SISTEMI) Ce marking : 2019 Material before processing : Max coil width 1250 x 0.12 Г· 0.80 mm. Uncoiler capacity : 16 Tons. Sheets dimensions : min. 300 x 500 mm. – Max 1250 x 2000 mm. Working speed 0-120 m/min. LIST OF MACHINES COMPOSING THE LINE ➢ STOCKING RAMP FOR 2 COILS ➢ COIL LIFT ON UNCOILER ➢ UNCOILER WITH SECTORS DIAM. 400 AND DIAM. 508 MM. ➢ PINCH-ROLL FOR STRIP FEEDING TO LEVELER ➢ 6HI-LEVELLER WITH INTERCHANGEABLE ROLL BENCHES – 1 BENCH FOR THICKNESS 0.12 ÷ 0.50 MM. – 1 BENCH FOR THICKNESS 0.50 ÷ 0.80 ➢ CONNECTION TABLE BETWEEN LEVELER AND PINCH-ROLL ➢ PINCH-ROLL ➢ DESCENT ROLLWAY IN LOOPING PIT ➢ ASCENT ROLLWAY FROM LOOPING PIT ➢ PINCH-ROLL WITH MOTORIZED ROLLS ➢ STRIP CENTERING DEVICE WITH VERTICAL ROLLS ➢ THICKNESS MEASURER TYPE ELECTRONIC KEYBOARD ➢ ROTATING SHEAR Hedpfx Acottlfksnet ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP ➢ COLLECTION BOX FOR TRIMMING AND DEFECTIVE PARTS OF THE STRIPS ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP IN THE FIRST AND SECOND COLLECTION BOXES AND STACK COMPOSITION ➢ CONNECTION ROLLWAY AND SECTION FOR CONVEYING OF SHEETS IN THE THIRD BOX. ➢ 3 STACK UNLOADING SHUTTLES TO CONVEY STACKS TOWARDS THE ROLLWAY ➢ 1 EVACUATION ROLLWAY FOR THE PACKAGING ➢ HYDRAULIC EQUIPMENT FOR ALL THE LINE ➢ INTRODUCTION STRIP OPERATION PULPIT LOCATED AT LINE ENTRY FOR COILS CUTTING ➢ MAIN PULPIT FOR ALL LINE OPERATIONS ➢ OPERATION PULPIT LOCATED AT LINE EXIT ➢ ELECTRICAL CABINET CONTAINING ALL ELECTRICAL/ELECTRONIC COMPONENTS AND PLC ➢ PHOTOCELLS AND SAFETY/PROTECTION BARRIERS.

Condition: excellent (used), ABE CraftCan35 canning line for 330 and 440ml aluminium cans, with 5 fill heads, and the rinser/blower addition, and the modified inlet conveyor to accommodate a date coder print head. Upgrade of much of the tubing to standard metric versions (6mm) vs the default 1/4 fittings the line was built with. Walk round video available. Hjdpfx Ajyq Ezyocnjt

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 2259, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,900 mm, rotational speed (max.): 24,000 rpm, controller model: Siemens 840D, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Hedoyv A Dkspfx Acnjt Travel X-axis: 6,000 mm Travel Y-axis: 3,500 mm Travel Z-axis: 1,900 mm B-axis: +/- 110° C-axis: 360° Spindle speed: 24,000 rpm Spindle taper: HSK 63 Spindle motor: 25 kW Table size: 6,000 mm x 2,500 mm (hole pattern 22H7 / M16) Feedrate X + Y: 30,000 mm/min Feedrate Z: 28,000 mm/min Rapid traverse: 30,000 mm/min MACHINE DETAILS Control: Siemens 840D Tool changer: 40 tools EQUIPMENT Spindle: Fischer (type MFWS 1709/30, 2 units) Milling head: Forest Line (type: fork head, B-axis swivels +/- 110°, C-axis rotates 360°) Richter chip conveyor (scraper conveyor) Blum tool measurement Parking station for milling head (2 units)

Condition: good (used), 1 x Carrot Line and Grader system Can also be used for potatoes, onions, beet root and brussel sprouts etc. System will be coming out of production end of May/early June. All equipment has had a full service and checked over during the spring period for the coming year. Haith Screen Bits Remover. The Screen Bit Remover continuously removes broken fragments of crop and debris from the produce flow. Carrots are transferred onto a traveling screen with a set size aperture. As the screen is conveyed forward, two full-width agitators gently move the crop causing any bits and debris to drop on to a waste conveyor below where the produce is taken over the end. The screen and agitator speeds are variably controlled individually to suit the various crop conditions. Grader / sorter Odenberg Titan 2 automatic camera grading system – installed in 2008. Titan 2 Sorter 6002.2, 3-way carrot sorter. The first sorter removes product that is not usable, damaged etc to the waste line. The second sorter removes short carrots, twisted and misshaped which are sent directly to the value tank. All the rejects go through the positive sorting area and the grading operative throws back any product that is fit for value sale. Hjdpfx Aev I S D Sscnot High capacity and low maintenance sorting machine Flexible sorting machine with gentle handling assured Quality control and feedback accessible through intuitive touch screen Consistent long-life accuracy. Grading Station. The grading operatives throw out any unusable product to the waste line via the positive grading area. Two to four graders can operate here depending on the quality of the produce. Wyma Lift Roller Sizing Grader – installed in 2019 The product is divided into five grades. 500g, 0-25mm, this goes to the value tank. 1kg, 25 – 42mm max. Loose min 30 – 45mm max. Lumpers, min 45mm upwards. Oversize. The Wyma Lift Roller Sizer is a diameter grader suitable for a wide range of fruits and vegetables including carrots, potatoes, parsnips, beets, citrus, onions, bulbs, brussel sprouts, rutabaga and other round or tubular products. It is extremely versatile, offering multiple size outputs at high capacity in one machine. It can cater for a large range of product sizes and shapes through a selection of different roller options. Product size ranges, or size bands, are created by adjusting the spacing between the rollers, at defined locations, along the length of the machine. The Lift Roller Sizer is made from stainless steel and food-grade plastic materials. Five Lift Roller Conveyors. All supporting framework available. *Video available on request* Located in Wexford, Ireland. Buyer to collect – machinery will be dismantled and loaded to your vehicle. UKFM2-6653

Condition: excellent (used), Year of construction: 2022, Multihead Weigher & Pouch Bag Filling / Sealing Line. Can mix three different products of different weights in the one pouch bag. Hsdpfovw Egrex Acnot Consisting of the following. 24 head weigher, sus304, 3-mix, 3 top cones, 100 degree flat chute, 2.5L dimple plate, touchscreen, photo sensor Pouch Machine Change Parts Gantry with stairs 3 infeed elevators Ice Viper Printer Set of wash walls to suit 2 x Cross feed conveyors All manuals and spare parts included Can be seen running In excellent condition

Condition: like new (used), Year of construction: 2017, functionality: fully functional, working width: 1,600 mm, total length: 75,000 mm, total width: 17,000 mm, Technical Details: Cefla painting/finishing line with roller coating machines for panel finishing *Maximum working width: 1650 mm *Automatic loading system with integrated robot *Line dimensions: 75 x 17 m *Line configuration: *3 x Cefla Smartclean 32-B brush cleaning machines *3 x Cefla Smartcoater MF Evo roller coating/painting machines *1 x Cefla Smartcoater SP1 Evo finishing machine *2 x Cefla UV-R M1 1600 UV curing tunnels (1 UV lamp each) *1 x Cefla UV-R M3 1600 UV curing tunnel (3 UV lamps) *1 x Cefla UV-R M2 1600 UV curing tunnel (2 UV lamps) *Cefla TR500 motorized conveyor line *Cefla automatic panel turner Hodpfoyv Hzgox Acnet *Costa top sanding machine with 1 roller and 1 finishing pad *Automatic loading system with 2 x ABB robots

Condition: used, Automatic Bag Filling Line Bag weights from 5kg to 1000kg Infeed with product de-clumper / product breakup breaker and sieve. Incline screw auger to high level hopper and mixer. Delivery system to bag filler where weighing takes place and metal detection before bag filling point. Hedpfx Acjyq Tb Ionet This system comes with a second mobile screw auger for filling 1000kg big bag / sacks Complete with all the controls for the smooth running of this bagging line. After Bagging the bags are sealed with a Saxon Bag Sealer and then stitched with a Singer Bag Stitcher.

Condition: ready for operation (used), Year of construction: 1965, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,150 mm, spindle speed (max.): 6,000 rpm, table load: 6,000 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 1,600 mm Hodpfxszuzpas Acnst Travel range, Y-axis: 1,200 mm Travel range, Z-axis: 1,150 mm Spindle speed: 20–6,000 rpm Work table: 1,200 × 1,400 mm Table load: max. 6 t Please note the following: The height and weight of the asset must be taken into account when selecting the transport vehicle. There is no loading dock on site. However, a forklift or an overhead crane is available for loading. If the asset is not collected on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data is based on the original offer. No liability is accepted for typographical or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the item on site before the auction ends.

Condition: excellent (used), Year of construction: 2022, Foil Pie Line Rinc Rijkaart 5 wide The line is commissioned but we do not have customers for foil Pies 2022 Machine date only trials have been made on the machine. Product Hedpfxexu Duxo Acnst Ø 110 mm round pie, 40 mm height – 5 products across – 125 prod/min, Filling weight approx.. 170 grams.

Condition: used, *VILAR LASSEUR VL 315 GRINDER - 1992 - Carbide Tool Sharpening* French VILAR Chatellerault grinder, Type *VL 315* - No. *315.256* - Date: *06/29/92* Hedjzxt Hfopfx Acnjt *Complete equipment:* - Cross table with carriage + swivel table for workpieces - Universal, inclinable tool holder - Long arm for lathe tool holder / carriage tool - Diamond grinding wheel, housing, coolant system - Remote control box, emergency stop button - Articulated lighting lamp - Original green Vilar sheet metal base 400V - In working condition, from a precision engineering workshop On a pallet - Approx. 350 kg - Easy to transport Video available upon request.

Condition: used, 1.0 piece. Nozzle for injection into the parting line. Manufacturer: ARBURG For machine models 270. Hjdpfxjzxtcyj Acnet

Condition: ready for operation (used), Manufacturer: Handtmann / Stiller Model: VF830 Year: 2020 Condition: Used Serial number: 44613 Hedpfxezxrx He Acnst Stock number: 3427P Filling pressure: up to 25 Bar Pump capacity: max 6000 kg/h Power: 3 x 400V, 50Hz, 6kW Dimensions: 2300 x 1500 x 2150 mm Weight: 1550 kg Infeed rotary table for empty cans Diameter: 1200 mm Handtmann / Verbufa filling machine for cans Type: 52088-A-0084 Serial number: 261960 Year of manufacture: 2020 Can diameter: 73 & 99 mm Power: 3 x 400V, 50Hz, 1.6kW Weight: 400 kg Double-head filling machine with Handtmann FST547 waterwheel With filling station and conveyor belt of 3200 x 2000 x 2200 mm Stiller can seaming machine Type: STA2000 Serial number: 20012 Year of manufacture: 2020 Capacity: up to 2000 cans/h Can diameter: 73 & 99 mm Can height: 30 - 300 mm Compressed air: 6 - 8 Bar Power: 3 x 400V, 50Hz, 3.6kW Dimensions: 2600 x 1100 x 2000 mm Weight: 570 kg Including conveyor belts and a rotary table with a diameter of 1200 mm.

Condition: excellent (used), LAMINATING LINE for panels (particleboards, MDF, HDF) Minimum/maximum panel dimensions: mm 600-1550 (width) x mm 1854-3660 (length) Minimum/maximum panel thickness: PB/MDF mm 8 - 44 (standard mm 16-19-22) // HDF mm 2,5 - 8 Adjustable working speed: m/min 8 - 29 Hjdpozxrgwjfx Acnet Minimum/maximum working cycle (Feeder and Stacker): 6 cycles/min - 10 cycles/min 01) "KONTRA" Loading station (with stack chain conveyor, 2 Lifting platforms, Feeding station) 02) "KONTRA" Roller conveyor with length guide rail 03) "KONTRA" 1 Vacuum transporter + 1 Stack chain conveyor for protection boards 04) HYMMEN LAMINATING SYSTEM a. "HYMMEN" Mod. FRB (Cleaning Machine) b. "HYMMEN" Mod. GLK-V (Smoothing Calender to uniform the workpieces surface) c. "HYMMEN" Mod. TLA (Glue spreading machine) d. "HYMMEN" Mod. TRC (Conveyor) e. "HYMMEN" Mod. ADZ (Evaporation / Flashing-off Zone) f. "HYMMEN" Mod. KKL (Laminating Calender) g. "HYMMEN" Mod. DSS (Double-belt continous press) h. "HYMMEN" Mod. PWG (Pressing conveyoring rollers) i. "HYMMEN" Mod. FAA (Foil Unwinding Station) j. "HYMMEN" Mod. GLK (Final Calender) 05) "KONTRA" 1 Speed-up roller conveyor with length guide rails on both sides and pusher 06) "KONTRA" Unloading station 07) "KONTRA" 1 Protection board magazine

Condition: excellent (used), Profiles / mouldings wrapping line Composed by: a) “DOUCET” loading-infeeding system, Model MSP-APV-408 b) “SCM” moulding machine, model SuperSet XL c) “BARBERAN” wrapping machine, model PUR-31-LD d) “NORDSON” PU glue melter-dispenser, model VersaBlue Hsdpfxezxrako Acnjt

Condition: used, all stainless steel water circulation net belt length 9.000 mm net belt width 900 mm adjustable speed lifting unit with electrical hoists dimensions (l x w x h): ± 11.500 x 1.600 x 3.000 mm + "IGEFA" tube heat exchanger Type 161U-159-159 380 kW + Conveyor belt with flights belt width: 800 mm distance between flights: 190 mm height of flights: 50 mm Hjdpfx Acozxqvqsnst