Used Demag Dh 410 H12 for sale (3,679)

Condition: used, Gear motor, electric motor, three-phase motor Hfjdpsc Sxqhofx Aiqsn -Speed: 89 rpm -Power: 0.25 kW -Construction: B5 angle -Shaft diameter: Ø 15 mm -Protection class: IP 54 -Dimensions: 380/200/H150 mm -Weight: 14 kg

Condition: used, Gear motor, electric motor -Speed: 80 rpm -Power: 0.55 kW -Construction: B5 angle -Diameter shaft: Ø 20 mm -Protection class: IP 54 Hodpsc Uz Htefx Aiqefn -Dimensions: 450/270/H175 mm -Weight: 20 kg

Year of construction: 1999, condition: used, Demag KBK 2 - crane sky crane runway Please ask your crane track according to your measurements. Payload / load lifting 80-125-250-500 up to 1000 Kg Technical data of the plant: Profile Demag KBK 2 rails Also available as monorail with elbows and points! Mounting height variable System can be supplied complete KBK rails, rail connectors, chassis, end plates, cable chain, holder / hanger etc. Optional all chain hoists are available Due to the low weight Taken assembly in lightweight construction / wooden buildings or older buildings is possible. Very good used condition Hedpfx Aisct Dhajqsfn Rails available in yellow or red! Shipping preferred possible pickup by freight Demag KBK1, KBK2L, KBK2 and KBK3 rails are in stock! Contact Person: Mr. Goepferich info ÄT mobatgg . de

Condition: good (used), Indoor crane, crane, trolley, crane running gear, crane undercarriage, girder undercarriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane -Manufacturer: Demag, 1 set of end carriages for single girder bridge crane Hfedpfstpkv Aex Aiqen -Load capacity: 3000 kg -Drive motor: Mannesmann Demag 16I6 KF 8-2 0.15/0.60 Kw -Support rollers: Ø 160 mm / support width 148 mm, dimensions see photos -Dimensions: 2300/650/H570 mm / 300 kg each -Transport dimensions: 2300/1230/H570 mm -Weight: 600 kg/total

Condition: used, Crane remote control, radio receiver, receiver, crane radio remote control, radio control system, crane control, radio remote control -Manufacturer: DEMAG Mannesmann Dematic, crane control PNN-BUS-3 -Type: RC-E 10 -Total dimensions: 380/180/H125 mm Hfjdpfx Aeqh Edpjiqon -Weight: 2.2 kg

Year of construction: 1980, condition: used, machine/vehicle number: TH20009955, Demag bridge crane, crane canopy, crane track, indoor crane Payload / lifting capacity max. 0.5t - 500KG, track approx. 9000mm Hfjdpfxjv A Snao Aiqjn Outer dimensions with head carriage approx. 9200mm Demag PK chain hoist with floor control Height from top edge of crane to hook approx. 750mm Head carriage length with buffer approx. 1700mm Lifting height approx. 4500mm Weight approx. 1200KG Optionally, 2x 25m guide rails HEB340 (340x300mm), including conductor rails, are also available. Beam lengths per side: 1x approx. 10m 1x approx. 15m Crane is dismantled, immediately available from location 75053 Gondelsheim Used condition ----- Pillar jib cranes and wall jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight forwarder possible, please enquire about postcode Collection preferred

Condition: good (used), Crane block, crane hook, load hook, single hook, bottom block -Manufacturer: Demag, Crane block: Crane hook load capacity 750 kg -Dimensions: 380/210/110 mm Hfjdpfx Aiewlggboqjn -Own weight: 9 kg

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control switch for crane remote control with cable -Type: DST 6 -Connector: 16-pin Hsdpfx Aioxzqp Aeqefn -Crane remote control: 2 steps below the switch each -Transport dimensions: 870/360/H140 mm -Weight: 6.1 kg

Condition: good (used), Electric motor, three-phase motor for gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer: Demag, crane motor unfortunately without type designation Hjdpfoxc Eiyjx Aiqsfn -Power: kW -Speed: 1485 rpm -Shaft: Ø 24 x 25 mm -Design: B14 -Dimensions: 370/180/H250 mm -Weight 19.8 kg

Condition: excellent (used), Year of construction: 2008, DEMAG Injection Moulding Machine System 1500/1500-16000 Basic Data Manufacturer: DEMAG Model: System 1500/1500-16000 Year of manufacture: 2008 Clamping Unit Clamping force: 15,000 kN Dimensions of mounting plates (H × V): 2150 × 1880 mm Clearance between tie bars (H × V): 1500 × 1250 mm Minimum mould height: 700 mm Maximum mould height: 1400 mm Maximum opening stroke: 2900 mm Injection Unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Injection weight (PS): 9,880 g Maximum injection pressure: 1454 bar Electrical and Hydraulic Equipment Rated pump motor power: 165 kW Heater power: 97 kW Machine Dimensions and Weight Net machine weight: 74 t Control cabinet weight: 21 t Total weight: approx. 95 t Hfsdpfxoyugale Aiqon Dimensions (L × W × H): 14.4 × 3.4 × 2.9 m Service History / Repairs 2010 – new screw with RSP and barrel 2015 – new IBED 2015 – new wiring board 2017 – new motor and pump no. 2 2017 – new injection cylinder rod BS with seals 2017 – replacement of oil cooler circulation pump 2017 – replacement of TeachBox (robot) 2018 – replacement of pumps P1 + P3 (at 65,800 h) 2018 – hydraulic oil change Optional ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly improves energy efficiency in hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor through a frequency inverter, which adjusts the motor speed to the machine’s actual demand during the production cycle. As a result, electricity is consumed only when it is truly needed. Main Benefits - Up to 30% reduction in energy consumption - Servo drive technology for hydraulic pumps - Global quality and proven technology used in the plastics processing industry - Reduced energy loss during machine idle time - Lower heating of the hydraulic system - Extended service life for the motor and hydraulic components - Option for installation in existing hydraulic injection moulding machines The ESS system allows significant reduction of machine operating costs while maintaining full production performance parameters.

Condition: excellent (used), Year of construction: 2008, Injection Moulding Machine DEMAG System 800/1120-9500 Basic Information Manufacturer: DEMAG Model: System 800/1120-9500 Year of manufacture: 2008 Clamping Unit Hsdpfx Aisyugctjqsfn Clamping force: 8,000 kN Platen dimensions (horizontal × vertical): 1620 × 1500 mm Tie bar spacing (horizontal × vertical): 1120 × 1000 mm Minimum mould height: 500 mm Maximum mould height: 1050 mm Maximum distance between platens: 2080 mm Opening stroke: 1030 mm Ejector stroke: 350 mm Ejector force: 139 kN Maximum mould weight: 7,200 kg Injection Unit Screw diameter: 130 mm Injection volume: 7,300 cm³ Shot weight (PS): 6,640 g Maximum injection pressure: 1,300 bar Screw length: 20 L/D Electrical & Hydraulic Equipment Rated pump motor power: 110 kW Heater power: 79 kW Hydraulic oil tank capacity: 1,300 l Machine Dimensions and Weight Machine dimensions (L × W × H): 12.3 × 2.7 × 2.7 m Machine weight: 33,500 kg Control cabinet weight: 9,700 kg Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with the modern ESS servo drive system, which increases the energy efficiency of hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency inverter, adjusting the motor’s rotational speed to the current demand during the production cycle. As a result, electrical energy is consumed only during the actual machine demand. Key Advantages - Up to 30% reduction in electricity consumption - Servo drive technology for the hydraulic pump - World-class and proven technology used in the plastics processing industry - Reduction of energy losses during idle operation - Lower heating of the hydraulic system - Longer service life of hydraulic components - Possibility of installation on existing hydraulic injection moulding machines The ESS system enables a significant reduction in machine operating costs while maintaining full production parameters.

Condition: good (used), Crane control system, controller, counter -Manufacturer: DEMAG, Crane control controller Hfsdpfxjzkhzuo Aiqen -Type: PRVZ2-A00 -Item No.: 52501784 -Voltage: 220 V -Dimensions: 110/60/H75 mm -Weight: 0.3 kg

Condition: used, New spare parts for DEMAG DKUN5 - DKUN 5 (KMK71) Spare parts for the repair of a DEMAG crane, chain hoist Suitable for DEMAG chain hoist DKUN5 Scope of delivery: 1x Shaft-coupling-KMK set Hedpszinw Tjfx Aiqofn 1x Stand set KMK / P = 12600633 1x Runner set KM71 B2 = 12845833 1x Fan set KM71 = 12882233 1x Driving dog KM71 = 12876033 1x Thrust ring set KM71 = 12885233 1x Bearing shield set KMP 71 BS = 12861433 1x Chain guide set LDKUN D5 = 83628033 1x Small parts set KMK 71 B2 = 12878533 Weight 11.5 kg G

Condition: excellent (used), Crane control system, controller, safety control system, safety switch, safety sensor, overload release power sensor, gear limit switch -Manufacturer: DEMAG, Crane control gearbox limit switch set, original packaging -Type: DGS 3 -142 -Item No.: 875 200 44 -Cardboard dimensions: 250/120/H115 mm Hfsdezkqizjpfx Aiqsn -Weight: 1.0 kg

Condition: good (used), Crane bottle, crane hook, load hook, single hook, lower bottle, lifting bottle -Manufacturer: Demag, crane hook lower block Hfsdpszk D Uqefx Aiqsn -Load capacity: 500 kg -Hook opening: 32 mm -Dimensions: see photos -Dimensions: 240/90/60 mm -Weight: 1.7 kg

Condition: good (used), Crane block, crane hook, load hook, single hook, lower block, rope pulley cover, rope sheave cover set -Manufacturer: Demag, Rope pulley cover set, Rope roller cover set -Lid: Dimensions see photos -Bore: Ø 55 mm -Quantity: 1 set available Hjdpszia Rrsfx Aiqefn -Transport dimensions: 350/345/H70 mm -Weight: 5.6 kg

Condition: used, Crane block, crane hook, load hook, single hook, lower block, rope pulley cover, rope sheave cover set -Manufacturer: Demag, Rope pulley cover set, Rope roller cover -Lid: 345 x 340 mm / Dimensions see photos -Bore: Ø 55 mm Hfjdpfszia Taox Aiqon -Quantity: 1 piece available -Transport dimensions: 345/340/H60 mm -Weight: 2.8 kg

Condition: good (used), Crane block, crane hook, load hook, single hook, lower block, rope pulley cover, rope sheave cover set -Manufacturer: Demag, Rope pulley cover set, Rope roller cover set Hfodszia Tmepfx Aiqon -Lid: Dimensions see photos -Bore: Ø 55 mm -Quantity: 1 set available -Transport dimensions: 350/345/H70 mm -Weight: 5.6 kg

Condition: excellent (used), Crane block, crane hook, load hook, single hook, lower block, rope pulley cover, rope sheave cover set -Manufacturer: Demag, Rope pulley cover set, rope roller cover set, unused, original packaging -Type: 2/1 2m -Item No.: 82930533 -Lid: Dimensions 450 x 450 mm Hfodozhtadjpfx Aiqjn -Quantity: 2 sets available -Price: per set -Transport dimensions: 460/460/H120 mm -Weight: 11.5 kg/set

Condition: excellent (used), Manual trolley, trolley, crane trolley, trolley drive, crane trolley, trolley, girder trolley, monorail trolley, running trolley, trolley, monorail trolley -Manufacturer: Demag, Running gear, chassis type RU 3 DK, original packaging -Item No.: 83970144 -Load capacity: 450 kg Hodpjzhtmkjfx Aiqefn -Dimensions: see photos -Quantity: 1x chassis available -Cardboard dimensions: 225/190/H85 mm -Weight: 2.8 kg

Condition: good (used), Friction wheel, running wheel, bridge crane, overhead crane, assembly crane, workstation crane, crane wheel, flanged wheel -Crane wheel: Flanged wheel, heavy-duty flanged wheel -Type designation: DG BM 59834544 -Impeller diameter: 225 mm -Track width: up to 55 mm -Hole: Ø 60 x 55 mm -Quantity: 1 piece available -Dimensions: Ø 255 x 85 mm Hfjdpfszhuhijx Aiqsn -Weight: 8.5 kg

Condition: used, Gear motor, electric motor, three-phase motor -Power: 0.55 kW Hodjc Uz Hujpfx Aiqjfn -Speed: 110 rpm -Shaft: Ø 20 mm -Construction: B5 angle -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 450/270/H175 mm -Weight: 20 kg

Condition: used, Electric motor, three-phase motor -Power: 0.37 kW -Speed: 705 rpm Hfodpfsdff Nbox Aiqon -Shaft diameter: 24 mm -Construction: B5 -Protection class: IP 54 -Price: per piece -Number: 5x available -Dimensions: 290/170/H205 mm -Weight: 13 kg

Condition: good (used), Year of construction: 1979, Bridge crane, manufacturer DEMAG, type: EKKE, year of manufacture 1979. Load capacity: 7500 kg. Span: 7500 mm. Hook height: 5500 mm. Complete with travel motors and hoisting gear from DEMAG. Crane documentation and inspection records, reports, and plans are available. Hsdpfx Ajh Uqbfjiqjfn Includes 20 meters of power rail.

Year of construction: 1972, condition: used, Electric chain hoist, crane, indoor crane, assembly crane, hand trolley, push trolley, crane trolley, trolley drive, crane drive, crane undercarriage, trolley -Manufacturer: Demag, electric chain hoist with chassis -Type: PK1N load capacity 250 kg -Main stroke: 4 m/min -Fine stroke: 2 m/min -Transport dimensions: 600/500/H230 mm -Weight: 23 kg Hfjdporfztlefx Aiqsn