Gear motor 0.55 kW 110 rpm

Demag UMF80AX-4Z

Condition: used, Gear motor, electric motor Kdjdpfjc Uz Htsx Agtol -Speed: 80 rpm -Power: 0.55 kW -Construction: B5 angle -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Dimensions: 450/270/H175 mm -Weight: 20 kg

Condition: good (used), Year of construction: 2006, I sell the automatic pneumatic end cutting saw Weinig Grecon Dimter Opticut 200 Elite Year 2006 Motor power 7,5kW Input table automatic feeding 4,10m (throughfeed system) Outut table automatic 6 pcs. kickers on right outfeed table Ksdpextxi Iefx Agtsdl Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Year of construction: 1995, condition: ready for operation (used), Max. roll diameter: 400mm, height: 1753mm, documentation available. Kdodpjfwml Rsfx Agtel

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Storage location: Garbsen Kodpfx Agovvizkstsdl

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, Equipment: cabin, Paint/spray booth dimensions without fan and control Panel! Extraction surface - dimensions (mm): 4430(w)x1900(h) Overall dimension(mm): 4530(w)x2350(h)x1910(d) Technical data: - Fan power 4.4kW (ATEX) - Fan suction capacity: 24000 m³/h (max 1200Pa) - Lighting: 2 pcs 2x58W (ATEX) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation Ksdpfxsia Taxj Agtodl - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us

Condition: new, Year of construction: 2026, A550 Fully Automatic Solid Wood Saw 9 m Fully automatic cutting of medium-large wood with simple-to-use automation. Put down any wood and the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Your fully automatic saw can optionally come as an inline optimiser saw. For every piece of wood you place down to cut, no matter what length, a laser sensor will measure its length. Our powerful optimisation algorhithm then takes your cut list and calculates the best order of parts to cut from this wood so that wastage is minimised. All of this happens on-the-fly, during the machine operation process, and without needing any input from you. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and wood feeding rates for maximum process productivity. Kodpfjf Ekngjx Agtsdl • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Frame and truss manufacture • Sheds manufacture • Furniture manufacture • Mitre timber structures manufacture • Bulk wood cutting Model: A550 Length: 9 m Material Length: 8580 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Year of construction: 2010, condition: ready for operation (used), Max. material width: 1700mm, max. roll diameter: 800mm, inner sleeve diameter: 152mm, max. roll weight: 750kg, stack length: 250-2200mm, connected load: 12kVA, length: 8397mm, with drawings, circuit diagrams, EC declaration of conformity, operating instructions, risk assessment, spare parts lists. Kedpfx Agjkkiwxetedl

Year of construction: 2006, condition: good (used), FIN Glue spreader SC2R/1300 Kdodofguntopfx Agtsl with 2 rollers The year 2006 manufacture: FIN s.r.l. Italy main technical specification: Width of working: 1300mm The maximum passage between roller: 120mm The diameter of rollers: 185mm Advancement speed: 19m/min Net weight 390 Kg Overall dimensions: 64 x 210 x 136cm Overall dimensions with case: 73 x 200 x 153cm 400 V, 50 Hz, 037 kW Accurate and uniform spreading with any type of glue, excellent technical characteristics, added to the high practicalness, functionality and safety for the operator, place it at the forefront among the 2 roller glue spreaders. Spreading roller covered in antiacid rubber, ground and furrowed, hard wearing, as they are built with a rational layer of rubber it is, therefore, possible to carry out 6-7 grindings. It is easy and quick to disassemble. Spreading, precise and uniform on one or both sides of the panels. Special shock-absorbers, on the roller supports, allow the rollers an automatic opening depth, so as to spread panels of different thickness within 5 mm. they also compensate for eventual parallelism differences of the panel. Uniform glue dosing by a rectified distribution tank, in sheet-iron, with very quick extraction to allow cleaning. Collecting tank, for glue and washing water, in galvanized sheet-iron, extractable for easy cleaning. Safety protections, in sheet metal on the rollers and glue distribution tank, a sheet metal protection prevents the introduction between the rollers of any object more than 5 mm. thick over the transit established, ensuring the maximum safety for the operator. Electrical installation, in a waterproof case with fuses, thermal switch for motor and transformer protection. Control panel, with starting button, stopping button and warning light (24 V). Rollers rotation chain with self-registrable turnbuckle pinion. Roller washing with a bored washing tube, for the water intake during this operation.

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWi 20.20 Dry splash wall Dimensions: 2000 x 2000 mm W X H Fan is built into the wall Air capacity: 7,200 m³ / h Motor: 1,50 kW ex-proof exhaust air pipe: 400 Ø mm Kdjdpjfr T Eqefx Agtsl depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: transition angular to round: 150,- EUR net Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Condition: excellent (used), Here we offer Mitsubishi industry 6 axis articulated arm robot. Mitsubishi Industry 6-Axis Articulated Arm Robot 6-axis jointed-arm robot RV-3SDB-S15 The RV-3SDB jointed-arm robot The RV-3SB robot is specially designed for handling loads up to 3.5 kg. suitable. The IP 65 standard encapsulation ensures that the robot can be used an operation under extreme conditions. Special features: Axis softness adjustment for workpiece tolerance compensation Conveyor belt tracking sensorless collision detection encapsulated design adaptive speed optimization Feature/Function degree of freedom (number of axes) 6 Standard version (oil mist) Mounting: floor, wall or ceiling mounting possible (wall mounting with restriction in J1 axis) Construction: vertical articulated arm Drive system: AC servo (all axes with brake) Position detection: Absolute encoder Range of motion: degrees Body (J1) 340 (-170 to+170) Shoulder (J2) 225 (-90 to+135) Elbow (J3) 191 (-20 to+171) Forearm rotation (J4) 320 (-160 to+160) Wrist tilt (J5) 240 (-120 to+120) Wrist rotation (J6) 720 (-360 to+360) Movement speed:degrees/s Body (J1) 250 Shoulder (J2) 187 Elbow (J3) 250 Forearm rotation (J4) 412 Wrist tilt (J5) 412 Wrist rotation (J6) 660 Resulting maximum speed 5500 mm/s Lifting force Nominal value 3kg Maximum value 3.5kg Reach radius (to the pivot point of the J5 axis) 642mm Weight: 37kg Robot controller CR1DA-721-S15 (230V) Teachbox R46TB with color/touch display Technical data: Kodpfjd H E H Ujx Agtjdl Dimensions (W × H × D) 252 × 240 × 114 mm Weight 1.250 kg Connection type: Connection to robot controller with circular plug,cable length 7 m Interfaces: RS422 For connection to the robot control Display/Screen: Touch-sensitive 6.5" TFT monitor with backlighting and and 640 × 480 pixel resolution, the touch screen can be operated with fingers or stylus. touchscreen. Type: Mitsubishi Melfa RV-3SDB-S15 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.