Used Decoiler Straightening Machine for sale (64,713)

Condition: excellent (used), Year of construction: 1990, number of straightening rollers: 23, roller diameter: 80 mm, Number off straightening rolls 23 units Roll diameter 80 mm Minimum thickess 0,5 mm Maximum thickness 12 mm Digital readout system position rolls Fine adjustment down feed   Rolling width: 1450mm Rolling thickness 3x toproll Ø:12mm Rolling thickness 5x toproll Ø:16mm Lhodjxyhhajpfx Afajf Top Roll Ø: 80mm Bottom Roll Ø: 80mm Number of rolls: 23 Rolling speed: 3,75 - 15 M/Min Adjustiment lower roll: 26mm/min. Power: 30kW Length: 3000mm Width: 4000mm Height: 2400mm Weight: 28000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Strip Straightening Machine for Coil Material WANZKE Type RG 400-7 Coil Processing Line REF No.: 1349-6 Year of manufacture: 1983 Nominal strip width: 400 mm Roll width: 408 mm Strip thickness: max. 2 mm Strip cross-section: max. 600 mm² Roll width, straightening rollers: 408 mm Number of straightening rollers (top): 3 (non-driven) Number of straightening rollers (bottom): 4 (driven) Straightening roller diameter: 50 mm Feed rollers: 2 pcs, Ø 50 mm (lower roller driven) Feed roller width (top): 390 mm Feed roller width (bottom): 408 mm Strip speed: approx. 5 - 45 m/min Motor power: 1.1 kW Ledpfxsxw Rcuo Afaehf Power supply: 230 Volt, 50 Hz - Infinitely variable straightening speed via DC motor with DC controller - Drive via geared motor with chain drive - Loop control with speed regulation with 2 speed stages - Upper roller frame adjustable via 4 handwheels - 4 dial gauges for fine adjustment - Mechanical opening of the upper rollers via eccentric lever - Adjustable lateral strip guide at the infeed side - 2 roller baskets for strip guidance - Electrical diagram available Space required by straightener with control unit (L x W x H): 1200 x 800 x 1600 mm Weight: 620 kg Good condition

Condition: good (used), Feed: Manufacturer: ALBA Tip: AVS 400 Belt straightening: Manufacturer. George Type: SBK 2 Lhsdpelz I R Rjfx Afaef Double straightening and feed line!!! With complete documentation!!

Condition: good (used), Pre-stroke: Lodpjlz I Hbjfx Afashf ALBA Type Mvhy 50 sheet metal straightening: Georg SKB With complete documentation!

Condition: good (used), Number of straightening rolls 5 Ledpfogvl U Rex Afaehf sheet width 430 mm Sheet thickness 1 mm Top roll diameter 2 Top rolls - Ø 60 mm Bottom rolls diameter 3 Bottom rolls - Ø 60 mm

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: D08L/8302, Offer Number: D08L/8302 Machinetype: straightening and cutting machine Make: BÜNDGENS Lsdpjwi Tfrefx Afaehf Type: UDW0 Constr. year: 2001 diameter range: 0,2-1,3 mm speed - meters/min: 15 Location: In our warehouse

Condition: used, wire diameter - max. 10 mm wire diameter - min. 3 mm wire length 8 m total power requirement 7,5 kW weight of the machine ca. 1,1 t Ledpjwu Hg Hsfx Afaehf dimensions of the machine ca. LxBxH 2,53 x 0,75 x 1,1 m

Condition: good (used), All information without guarantee. Lhedofd R Ahspfx Afajf A demonstration is at any time possible in our showroom.

Condition: used, Clamping plate, machine table with T-slots made of steel Clamping table Clamping plate, clamping table, machine table HOMEMADE can also be used as a straightening plate or welding table Table surface: 2150 x 1040 mm Ljdpfxstqgnye Afajhf Construction height: 200 mm - Top and bottom sides machined in parallel, surfaces planed - Table plate L x W x H = 2150 x 1040 x 65 mm - Table plate provided with several symmetrical bores Table plate with M16 and M24 threaded holes, M16, M24, M16, M24, etc. Bore spacing lengthwise: approx. 250 mm Bore spacing crosswise: approx. 255 / 165 / 255 mm - 6 pieces double T-beams welded onto the steel plate Double T-beam dimensions: L x W x H 2150 x 125 x 135 mm Clearance between double T-beams: 50 to 55 mm Weight: 1730 kg Good condition

Condition: used, Year of construction: 2006, functionality: fully functional, Description Headstock and tailstock manually adjustable. Ideally suited for machining one crankshaft type with different strokes. Workpiece Max. center-to-center distance of the outer main bearings: 920 mm Max. roll arm length (½ stroke + counterweight radius): 195 – 270 mm Max. number of machineable bearings: 8 main bearings, 6 pin bearings Main bearing diameter, min. / max.: 30 / 88 mm Pin bearing diameter, min. / max.: 30 / 84 mm Bearing width, min.: 18.5 mm Lhjdjwm Elfjpfx Afaef Stroke, max.: 140 mm Bearing pitch, min.: 29.5 mm Deep rolling machines Max. deep rolling force: 30,000 N Headstock Main drive motor power: 20 kW Deep rolling speed: 120 rpm / 60 rpm Leveling rolling speed: 30 min¯¹ Machine Weight including auxiliary units: approx. 13,800 kg Dimensions including integrated control cabinet and hydraulics (L/W/H): approx.: 4.5 x 2.5 x 2.2 m Max. machining height: 1,100 mm

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, BAR PEELING MACHINE AND BAR STRAIGHTENING MACHINE IN SET The equipment is in perfect working condition and can be inspected under power. 1) BAR PEELING MACHINE CALOW, Germany – Type 125 mm Fully retrofitted in 2021 (completely new mechanics and electronics) Technical data: Working range: Ø 30 – Ø 125 mm Bars length: 2.5 – 9.5 m Processing tolerance: ISO h9 (possible h8) Peeling depth: up to 3.5 mm, depends on the steel type Steel types: carbon steel, bearing steel, spring steel, etc. Feeding speed: digitally adjustable 0.5 – 12 m/min Cutting head revolutions: up to 1700 RPM Cutting tools: two sets of 4 knives each with automatic digital positioning (triangular and long knifes) Automotive loading table with bar counter Feeding roller with motorized height adjustment Infeed pressure rolls – 4 vertical rolls with inverted DC motor Peeling machine, consists of: - Front guiding system (hydraulic) - Peeling head with 4 knifes - Rear guiding system (hydraulic) Lhedpfx Aowqb Scsfaof Bar extraction carriage Main motor and transmission Automatic knife positioning Control panel “Siemens Panel” HMI with digital display Output pressing rolls - tween Unloading table with motorized height adjustment Collector with counter and automatic collection of finished bars Hydraulic unit – completely new Electric cabinet – new of 6 modules. 2) BAR STRAIGHTENING MACHINE DAHLAHOUS, Germany – Type 135 mm Fully retrofitted in 2018 (completely new mechanics and electronics) Working range: Ø 28 – Ø 140 mm final processed thickness 3-roll technology. Rolls with axial movement for different sizes Overall length 6 – 8 meters. Rolls: Suitable for peeled and unprocessed (black) bars. Composition of the bar straightening machine line: Loading table with automatic bar feeding. Main machine body with control panel. Output table with automatic unloading onto a bundling conveyor. The offer includes careful dismantling and loading on transport at the location. There is an opportunity for an additional agreement for the installation of the equipment and commissioning at the client’s site with an operational warranty up to 12 months.

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: AP-10, type of input current: three-phase, input voltage: 380 V, total width: 7,000 mm, total length: 23,000 mm, nominal power: 20.5 kW (27.87 HP), electrical fuse: 60 A, Mašina za ispravljanje i sečenje armature – Centralni deo mašine je instalisane snage u kW u zavisnosti od modela – Uz mašinu se isporučuje odmotač nosivosti 3t. (vitlo) sa pneumatskom kočnicom – Automatski sto za odlaganje gotovog proizvoda 6 m – Tačnost mašine je ±2mm. – Mašina je automatska – Brzina mašine je od 50-100m/min Ledpfxjwyaywj Afaehf – Uz mašinu dolaze: dva seta čaura za ispravljanje, dva para noževa i dva para mernih valjaka. Oprema na mašini ● elektro oprema u ormanu Schneider ● svi ležajevi u mašini su FAG ili SKF

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: D08L/7601, Offer Number: D08L/7601 Machinetype: straightening and cutting machine Make: WAFIOS Lsdpfx Ajwi S N Ajfajhf Type: RS41 Constr. year: 1980 diameter range: 3-10 mm cutting length: 2000 mm speed - meters/min: 120 Location: In our warehouse

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: D08L/8182, Offer Number: D08L/8182 Machinetype: straightening and cutting machine Make: MRP Type: RA13 Constr. year: 1981 diameter range: 5-13 mm cutting length: 2000 mm speed - meters/min: 21 - 90 Location: In our warehouse Ledpfx Ajwi Tkhjfaohf

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: D08L/7600, Offer Number: D08L/7600 Machinetype: straightening and cutting machine Make: WAFIOS Type: RS40S Constr. year: 1980 diameter range: 4-10 mm cutting length: 3000 mm Lhsdpfx Afowi S N Njasf speed - meters/min: 130 Location: In our warehouse

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: D08L/7763, Offer Number: D08L/7763 Machinetype: straightening and cutting machine Make: HSH Type: for concrete anchors Constr. year: 1990 diameter range: 3-10 mm cutting length: 10-200 mm Ledpfxswi Tc Dj Afaehf Location: In our warehouse

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: D08L/7603, Offer Number: D08L/7603 Machinetype: straightening and cutting machine Ledewi S Nvepfx Afashf Make: DEITERS Type: DaE Constr. year: 1977 diameter range: 1-8 mm cutting length: 3000 mm speed - meters/min: 13-56 Location: In our warehouse

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: D08L/8034, Offer Number: D08L/8034 Machinetype: straightening and cutting machine Make: WAFIOS Type: R31 Lsdpfxjwi Th To Afaehf Constr. year: 2000 wire diameter range: 1,5-7,0mm cutting length: 3000 mm speed - meters/min: 5-120 Location: In our warehouse

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: D08L/8081, Offer Number: D08L/8081 Machinetype: straightening and cutting machine Make: WMW Type: UDARA10 Constr. year: 1980 diameter range: 3-10 mm Lhsdpfxswi Svce Afaef cutting length: 2000 mm speed - meters/min: 22-71 Location: In our warehouse

Condition: used, Year of construction: 1955, functionality: fully functional, machine/vehicle number: D08L/8075, Offer Number: D08L/8075 Machinetype: straightening and cutting machine Make: WAFIOS Lhedpowi Svisfx Afajf Type: DR/F30 Constr. year: 1955 diameter range: 7-12 mm cutting length: 6000 mm Location: In our warehouse

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2-1, 2006, Eurobend CNC 16x4 rebar from coil straightening and cutting machine in used but working condition. 4 x 5 Ton decoilers with pneumatic brakes. 4 x rotor for diameter 8-10-12-16 mm rebar wire straightening and automatic cutting with hydraulic moving cutters. 1 line or even up to 4 lines together cutting. Lhsdpfx Ajrdvq Ajfaef PC with barcode scanner option. Cutting length up to 14 meters and more. Pockets for storage. Chain conveyor for transport of bundles.

Year of construction: 2000, condition: like new (used), Second-hand machine which has never been used, YOM: 2000. Only the straightening part of the machine is available, thus, no the cutting system, neither the bank to receive cut parts (this can be purchased by the maker : Vitari). Capacity 4,0 mm max. Lsdpfoim Ittex Afaehf

Condition: good (used), GUK FA 49/4 Folding Machine + GUK FA 49/4 Cross Folding Module The machine is in very good technical and visual condition. Format: 490x690mm. Folding speed: 30-160m/min Equipment: 4 parallel cassettes on the main unit 4 perpendicular cassettes on the cross-folding unit First cassette extended. Cassette adjustments are dial-based. Smooth speed control. Counter with batching function and folding speed indicator. Rietschle compressor. Tool roller with a large number of perforating, creasing, and cutting tools. Raised sound insulation covers. Vacuum-assisted feeding Mobile delivery (free standing delivery) with smooth speed control Full documentation. Lhjdey Ehk Ijpfx Afajf Extensive set of accessories.

Condition: not inspected (used), functionality: unexamined, overall weight: 700 kg, total length: 2,200 mm, total width: 1,000 mm, total height: 1,600 mm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates timely collection between 23/06/2026 and 26/06/2026! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,200 x 1,000 x 1,600 mm Weight: 700 kg Lodoy D S Unjpfx Afashf EQUIPMENT RNA Vibratory Feeder (diameter: approx. 800 mm) External reference: 33

Condition: not inspected (used), functionality: unexamined, overall weight: 700 kg, total length: 2,200 mm, total width: 1,000 mm, total height: 1,600 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 23/06/2026 and 26/06/2026! MACHINE DETAILS Dimensions & Weight Ljdpfx Afoy D S S Hjaehf Dimensions (L x W x H): 2,200 x 1,000 x 1,600 mm Weight: 700 kg EQUIPMENT RNA vibratory feeder (diameter: 800 mm) External reference: 34