Straightening and cutting machine

DEITERS SRM 10

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Dksdpfor Nfvmex Akvsr Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 Retort Heat Treatment Furnace - Like new: hardly used - Documentation available (both electronic and physical) - Pallet with spare parts included TECHNICAL DATA System type: RWO 360/400-1150 Dedpfx Akeiryyaevjkr Furnace chamber temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C in a vacuum Control stability: ± 2 K Temperature homogeneity: ± 6 K in the range of 600 °C to 1150 °C at the end of the stabilization period Control voltage: 230 VAC / 24 VDC Furnace working space: 360 x 400 mm Load: ≤ 50 kg Heating: Three-zone Pressure: ≤ 350 mbar Final vacuum pressure in the cold state: < 5 * 10-5 mbar in a clean, dry furnace Installation area: 900 x 1900 x 3000 mm Total system weight approx.: 1500 kg Sound pressure level: < 70 dB We assume no liability for the accuracy, completeness, and currency of the information provided.

Condition: new, Year of construction: 2025, NEW! Sheet Folding Machine,Plate Bending Machine ZGR-1400/2,0 Our products are best quality and have certificate CE. You are buying directly from manufacturer ! Technical data: - Maximum working width: 1400 mm - Sheet gauge up to: 2,0 mm (Steel) !!! (specially enforced machine) Dedpfx Aecpn Hbekvekr - Aluminium Plate 2,5 mm Cooper plate 2,4 mm - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 24 mm - Protractor - Weight: 190 kg - Rotary shears (max. plate gauge 0,8 mm / Steel) as an option 350 Euro - edge pressing optional 75 Euro - The machine have certificate CE and 12 months warranty. Only shipping is possible Delivery every week and possible payment in cash on delivery Price excl. shipping We provide invoices with 0% of tax.

Year of construction: 2024, condition: new, Technical data of the furnace nominal heat output: 30,00 kW maximum heat output: 35,00 kW / approx. 400 m2 complete with: axial fan with speed: 1380 rpm and capacity: 4650 m3/h complete with: blower control unit SCL-1515 innovative design of the air jacket that completely surrounds the combustion chamber for maximum efficiency indestructible firebox, made entirely of certified boiler plate p265gh and 16M06 #6mm thick Large flue that reduces fuel consumption by up to 30%. Energy efficiency class: A energy efficiency index: 110 net weight: 260 kg gross weight: 290 kg Grille: 1000 x 250 mm Dkodpjpm Ex Hjfx Akvor coating with certified heat-resistant paint, which protects against corrosion and gives an aesthetic appearance solid construction powerful combustion chamber 100 x 55cm! large loading door instruction manual efficiency: 72,00% CO emission at 13% O2: 1.20m Fuel type: recommended seasoned hardwood with moisture content ≤20%* mg/Nm3, briquettes, coal only up to 10%. Dimensions: External dimensions: overall width: 650mm x overall depth: 1350mm x overall height: 920mm. dimensions of the fireplace: width: 550mm x length: 1000mm x height: 450mm Dimensions of the upper door (3 and 4 mm sheet metal): Width: 410mm x Height: 340mm Dimensions of the lower door (3 and 4 mm sheet metal): Width: 410 mm x Height: 150mm Dimensions of the upper loading opening: width: 320mm x height: 320mm Dimensions of the lower opening: width: 320 mm x height: 130 mm dimensions of the grille: width: 250mm x depth: 1000mm Diameter of the hot air outlet: Ø 150mm diameter of the exhaust outlet: Ø 150mm Height of the feet: 140 mm

Condition: excellent (used), Year of construction: 1989, Machinetype: barbed wire machine Make: VITARI Type: MFS Constr. year: 1989 line wire diameter: 1,6-2,8mm Dkedpfjw N D Sujx Akvjr point wire diamter: 1,6-2,5 mm output – meter/min: 27-47 distance of barbs: 50-150mm Excellant condition

Condition: reconditioned (used), Year of construction: 1994, Min.-max. wire dia. 6 to 14mm (.236″ to .551″) Flying shear (5) indexing rotary arbors (4) pre-feed rolls 80 to 120 mts/min Dksdpfx Ajfkmr Sokvjr Max. cutoff lgth: 15 meter track Indexing wire/rod collector 30kW (40HP) AC motor Hydraulick motor: 15 kW (20HP) Operators control panel; 380V- 50 cycle – 3ph PLC Control SIMENES S 5 3 vertical payoff units Completely refurbished machine

Condition: new, Year of construction: 2025, pressing force: 20 t, – Capacity 20 tons Djdpfx Akjvt Eunovekr – Bending capacity 200 x 12 mm – Stroke 200 mm – NC touchscreen control – Foot control – Emergency stop – 400V

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: D08L/7603, Offer Number: D08L/7603 Machinetype: straightening and cutting machine Make: DEITERS Dkodpjwi S Nvjfx Akvjr Type: DaE Constr. year: 1977 diameter range: 1-8 mm cutting length: 3000 mm speed - meters/min: 13-56 Location: In our warehouse

Condition: good (used), Straightening machine, wire straightening machine, unwinder, straightening machine combination, pay-off reel, wire unwinder, double reel, reel, pay-off reel, motor-driven reel for wire processing, punch, eccentric press, hydraulic press, punching machine, motor reel, winding roll, unwinder, wire unwinder -Wire straightening machine: decoiler-straightener combination -Type:not visible -Note: without documentation -Engine: Fukota 1.5 kW Djdpfein Rn Ajx Akvjkr -Straightening rollers: for Ø 20 mm, see photos -Receiving rollers: Ø 152/215 x 1330 mm -Total dimensions: 3040/2450/H2525 mm -Weight: 2080 kg

Year of construction: 2007, condition: ready for operation (used), A Wafios CNC wire and tube bending center is available. Axes: 9, wire diameter range: 1.5mm-8mm, tube diameter range: 3mm-10mm, wire tools: 2.5mm/4mm/5mm, tube tools: 6×1mm, feed speed: 120m/min, feed roller pairs: 3, bending head transverse stroke min./max.: -200mm/200mm, bending head stroke min./max.: -120mm/25mm, bending head orientation: 0°/30°, return length range: 400mm-1300mm, bending moment: 520Nm, upsetting force: 10kN. Machine dimensions X/Y/Z: approx. 3500mm/1800mm/2300mm, weight: approx. 5800kg. Documentation available. An on-site inspection is possible. Dodpfozka Nwex Akvekr