Straightening and hot parting machine

BUENDGENS UDR

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 403, THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Hedpfx Ahjn D Ew Io Nsfb Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool: Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Vending machine cup capacity/capacity/contenance=223ml 593 // 460 // 8 // Coffee-to-go / thermo mug / thermo cup Filling capacity / Capacity / Contenance=300ml / 12 oz 509 // 452 // 6 // Ice cream cup: filled to the brim=140ml / Filling capacity with headspace 6mm: 120 ml 591 // 459 // 10 // Thermo mug ⌀ 81/180ml 740 // - // - // Standard cup with sealing edge ⌀ 75-120ml 3589 // 458 // 12 // Coffee-to-go / thermo mug / thermo cup: Filling capacity / Capacity / Contenance=80ml 595 // 456 // 10 // Vending cup / Gobelet pour automate: Filling capacity / Capacity / Contenance=150ml 210 // - // - // Baking case / technical part / plate or tray 8000 // 455 // - // Granule cup 180 ml / technical part with flat sealing edge

Year of construction: 2003, condition: ready for operation (used), Used drum dryer manufactured by SAFEM, extracted from a line of gluten-free products. Fluid: Steam Design pressure: 12 bar Hsdpoq Nmuwjfx Ah Nefb Maximum operating pressure: 9,5 bar Test pressure: 24 bar Maximum operating temperature: 192ºC Volume: 4.55 m3 Pressure x Volume: 54.6 bar x m3

Condition: new, Continuous drilling capacity in St 60: 15 mm Normal drilling capacity: 18 mm Tapping capacity: M 8 spindle: MK 2 drilling depth: 80 mm throat depth: 180 mm spindle speeds infinitely variable 200 - 4,000 rpm spindle speeds for threads 200 - 700 rpm distance spindle/table: up to 380 mm table surface: 250 x 220 mm column diameter: 65 mm total height: 910 mm Hodpfx Ahob Eldnj Nsfb weight: 80 kg three-phase motor frequency controlled: 1,1 kW with full threading device and programmable digital display machine in stock and immediately available

Year of construction: 2024, condition: new, Overview - of the different variants *Not every position is required: Optional: -Bale shredder MHB from 24.990 € net -MHZ straw mill from € 7,980 net -Special hopper 970 € net -Cyclone from € 3,750 net -Sheet metal silo demonstrator with discharge (only sketched in the picture) *optional, if you want to load with the wheel loader Unit price net from € 14,750 - Demonstrator -Dedusting auger - length approx. 4 m 4 sieves are mounted on the underside, which are extracted. Unit price net from: 9.750 € - Extraction parts / hoses flat rate 945 € net - Complete control system Net unit price: € 2,750 -Demonstrator extraction unit MMJET 160 Demonstrator, with cleaning Connection 160, fan 2,2kw air capacity 1850m³ /400 V Automatic compressed air cleaning Unit price net from: 6.950 € -Baler B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with + - 20 kg from 59.995 € net *A reference system (baler) is located in zip code: 64579 Gernsheim Technical data: Bale size (WxDxH): 400 x 400 x 800 (height can be adjusted on request) Bale weight +/- 20 KG (depending on material) Capacity: approx. 30 bales per hour Storage container approx. 0.7m³ capacity Filling level sensors for min./max. filling level in the container Hedpfx Ahoff Sbie Njfb Hydraulic pre-compressor Hydraulic compression ram Hydraulic unit, valve block with oil tank Pump 18.5 KW / 50 liters Rollers in the bale chamber for easy bale push-off Dimensions (l x w x h) 3105x2830x2455 mm Weight approx. 1500 KG mütek baling presses / wrapping machines are designed for the production of bales from a wide variety of materials such as shredded micanthus or elephant grass, wood chips, sawdust and shredded straw. straw. The machine is characterized by a robust design that guarantees consistent quality in continuous operation. quality in continuous operation. The baler compacts the material filled into the storage container without the addition of binding agents and packs the material into plastic bags. The volume of the material can be considerably with the baling press. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18 % Atro. The container of the mütek baler can be fed automatically or manually and has a volume of approx. 0.7 m³. volume of approx. 0.7 m³. Containers with a larger volume or with an attached suction and filter system as a complete disposal unit are also available. In addition to automatic filling via deduster, mütek also offers filling by means of screw conveyors. With both variants, automatic automatic dedusting is possible. mütek baling presses are equipped with a control cabinet for the control system. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adapted to your requirements on request. The following advantages arise in the production of bales: - simple and safe storage - No loose dust - Minimization of the storage volume - Low transport volume *Requirements for source material: - dry (max. 30 % ATRO) - Maximum length 35 mm

Condition: new, Article: Welding rotary table 50 kg TYPE: KT-50 without jaw chuck Max. Load: 50Kg horizontal Max. Load: 25Kg vertical Rotation speed: 1-7,5 rpm Rotation direction: left and right Face plate speed: manually adjustable Hjdpfxjbambrj Ah Njfb Face plate diameter: 315mm height of faceplate: 375mm inclination angle of face plate: 0-90 Motor power in operation: 0,08kw Motor power standby (Kw): NA dimensions: 430 x 430 x 375mm Weight: approx. 38kg Power: AC 110V / 220V 50/60Hz Price is without chuck and height adjustable workbench Surcharge quick chuck 195.-€ Packing and shipping Germany approx. 80.-€

Condition: ready for operation (used), Fully Automatic Flatbed Die-Cutter, Non-Stop Feeder, Hfjdpfx Ahowly D Hs Nsb Automatic Vacuum Plate, Double Sheet Cleaning Station, Turn Die Cutting Frame, (Batch Delivery) Non-Stop Delivery With Belt, Cutting Force 300 TON, Up to 4.500 Speed/H, Working With Corrugated Cardboard Of Thickness Max. 9mm, Min. 0,9mm, Format: Max. 1055x1575mm, Min. 400x600mm, Standard Accessories Bobst SPO 1575 EG 1980, fully rebuilted 2015, chain changed 2024.

Condition: excellent (used), Year of construction: 1989, wire diameter range: 1,8 - 5,0 mm ring diameter range: 80 - 600 mm wire feeding length: 0 - 10.000 mm output: max. 30 rings/min welding capacity: 10 kVA Hfsdpfx Asf Tymboh Neb

Condition: new, Bernardo Universal Turning Machine Master 360 Pro Peak 1000 mm Peak height 180 mm Orbital diameter via bed 360 mm Orbital diameter via creation * 502 mm Orbital diameter via paddling sled 220 mm Bed width 185 mm Spindle hole 52 mm Spindle intake A4 55029, D1-5 Speed range (8) 70-2000 U/min Area Longitudinal Pros (32) 0.052-1,392 mm/U Area of planning precurs (32) 0.014-0.380 mm/U Metric threads (26) 0.4-7.0 mm Customs thread (34) 4-56 Gg/1 " Pinol diameter 42 mm Pinoline path 100 mm Pinol intake MK 3 Engine drop-off power S1 100% 1.5 kW (400 V) Engine recording power S6 40% 2.2 kW (400 V) Machine Measurement (B x T x H) 1825 x 750 x 1600 mm Weight about 576 kg * Bed length removable: 205 mm Delivery • 3-axis digital display i200 with LCD display • 3-baking lining DK11-200 mm/D5 • Planboard 200 mm/D5, according to A4 55029 • Fixed bezel-passage diam. max 70 mm • Running bezel-passage diam. max 60 mm • Coolant equipment • First filling with Shell Tellus 46 • Extractable late newfir • Tension 280 mm • Quadruple steel holders • Protection device for quadruple steel holders • Slip clutch • Micrometer longest strike • Thread watch • LED machine light • Reducer sleeve • Changes • 2 centering tips • Foot pedal with braking function according to CE • Engine with magnetic brake according to CE standard • Unterdesigned with drawers • Operating tool Hedpfx Ahed I H Ize Nofb

Condition: good (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 01093.01-808, A used L&Z lathe, manufacturer: VDF BÖHRINGER, type: DUE 630, year of manufacture: 1986, machine number: 01093.01.-808. Turning length: 3000 mm Turning diameter: 630 mm. Equipped with 2 steadies, chuck, faceplate, and Multifix toolholder. Hfedoxd Df Njpfx Ah Neb

Condition: used, Year of construction: 1955, Technical details: turning diameter over bed: 420 mm turning diameter over support: 240 mm turning length: 1100 mm turning dia. in gap: 600 mm range of revolution per miute: 24 - 900 / 8 step U/min spindle bore: 41 mm range of feed in x - axis: 0,0120 - 0,1000 mm/U range of feed in y - axis: 0,0062 - 0,0302 mm/U tailstock quill taper MT: 3 tailstock quill adjustment: 220 mm total power requirement: ca. 4,0 (ohne Gewähr) kW weight of the machine ca.: 1,2 t Hjdpfx Aou Ix D Ajh Nefb dimension machine xH: 2,3 x 0,9 x 1,3 m Equipment: 3-jaw chuck Ø 200mm Tool holder 4-way, swivelling 30° right/left T-slot for copying device Driving disc *