Used Cenventional Lathe for sale (5,331)

Condition: used, Year of construction: 1971, turning diameter 1000 mm turning length 1000 mm swing diameter over bed slide 255 mm spindle head 6 spindle bore 56 mm dimensions of the machine ca. 3 m Rsdjzhciuepfx Adrow

Condition: used, Year of construction: 2002, turning diameter 240 mm turning length 530 mm control Siemens 810 D Powerline swing diameter 560 mm x-travel 207,5 mm z-travel 530 mm turning speeds 6000 U/min 12 Stk. total power requirement --- kW Rodpoycxibsfx Adrew weight of the machine ca. 6,1 t

Condition: used, Year of construction: 2011, turning diameter over bed 640 mm turning length 2.000 mm control 840D incl. Weiler SL1 Siemens centre height 320 mm swing diameter over face slide 405 mm radial face slide travel 380 mm travel upper slide 130 mm bed width 380 mm turning tool - shaft cross cut 32 x 25 mm turning speed range - main spindle 0 - 2.500 min/-1 Rsdpfxozhcfvo Adrjw transmission ratio 2 transmission ratio 1 0 - 800 min/-1 transmission ratio 2 0 - 2.500 min/-1 power capacity - main spindel 20,5 / 17 kW max. Torque 1.400 Nm spindle head Gr. 8 DIN 55027 spindle diameter in front bearing 120 mm spindle bore 83 mm taper bore 90 metrisch power feed longitudinal 10.000 N power feed coss 9.000 N feed range 0 - 20 mm/-1 rapid traverse 10/7 | 5/3,5 m/min metric 0,1 - 400 mm inch 1/4 - 56 G/1" module mm . II dia. of quill 100 mm quill stroke 200 mm capture MK 5 total power requirement 30 kVA weight of the machine ca. 5,7 t dimensions of the machine ca. 5,0 x 3,5 x 2,0 m Lathe cycle controled WEILER - E 60 / 2000

Year of construction: 2000, condition: ready for operation (used), Offered is a CNC lathe Traub. Number of spindles: 2, spindle height above floor: 1130mm, max. turning diameter: 36mm, max. bar diameter: 36mm, max. turning length: 100mm, max. main spindle speed: 6300rpm, max. counter spindle speed: 6300rpm, main spindle power: approx. 10.7kW, counter spindle power: approx. 10.7kW, drive power range: main spindle travel X/Z: 370mm/250mm, counter spindle travel X/Z: 370mm/250mm, tool turret: 12, turret travel X/Z: 50mm/100mm, Y-axis turret: +/-20mm, max. speed of driven tools: 6000rpm, front tool positions: 5, rear tool positions: 5, control: Traub TX 8i. Weight: approx. 4000kg, machine dimensions: X/Y/Z: approx. 3400mm/1300mm/1700mm. Documentation available. Inspection possible by arrangement. Redpfxjzidire Adrow

Condition: used, Year of construction: 1982, Technical details: faceplate diameter: 2600 mm turning diameter over support: 2500 mm turning length: - mm centre distance: 1600 mm turning diameter over bed: 2900 mm spindle bore: 100 mm revolution per minute: gear steps U/min feed range: Überdrehen 0,12-31,5 Plandrehen 0,12-45 mm/min bed guideways length: 2900 mm Redpfjwtctyex Adrsw max. workpiece weight between centres: 400.000 kgs total power requirement: 45 kW weight of the machine ca.: alle Komponenten zusammen: ca. 29,0 t machine dimensions LxWxH: 5.2 x 5,0 x 3,1 m 3-way measuring system with digital display RSF electronics Control panel Cooling unit for Rittal electric cabinet *

Condition: used, Year of construction: 1997, Biglia B.111 CNC lathe Fanuc 0T CNC control Specifications: Maximum turning diameter: 200 mm Rodpfx Asyzh H Iedrew Turning length: 300 mm Spindle: Bar capacity: 42 mm Speed: 5000 rpm Power: 7.5 kW 1 turret with 12 tools Ladner 3-jaw chuck X-axis travel: 110 mm Z-axis travel: 300 mm Videos available

Condition: refurbished (used), Year of construction: 2007, operating hours: 5,000 h, functionality: fully functional, Fully equipped machine IMECA BOSS 32 L edger Turning tool holder included 6 fully overhauled motorized tools New tool drive gearbox. New Y-axis, motor, and ball screw. Clamping and guiding device provided with the machine New edger channel Rsdpfx Aszic Rusdrow 380 V / 220 V transformer included

Condition: used, Schaublin 102 VM Rodpszicwbsfx Adrow We have a total of 5 units in stock. The price is 2000 Euros per unit. See photo.

Year of construction: 2013, operating hours: 9,073 h, condition: used, machine/vehicle number: L8H-11203053DFBH, Travel ranges (X/Z): 203/550 mm, max. turning diameter: 256 mm, 12-station turret with driven tools, max. speed: 4,000 rpm, tool holder, WinMax control system, chip conveyor, coolant unit. Rjdpfxozha E Hj Adrew

Year of construction: 2013, operating hours: 25,877 h, condition: used, machine/vehicle number: 01620008481, Tool holder: VDI 30, weight: 3,265 kg, control system: SIEMENS, 1 chip conveyor, 1 set of VDI 30 tool holders, approx. 50 pieces, approx. 8 powered tools, on a transport trolley. Rodpfxozha Ale Adrew

Condition: excellent (used), Year of construction: 2012, Capacity Swing over bed 950mm Swing over carriage 630mm Max turning diameter 950mm Max turning length 4845mm Rjdpfx Aozhaqvjdrow Distance between centres 5000mm Max load between centres 5000kg Spindle Spindle speeds 2 - 630rpm 630 H Max 205 L Max Spindle speed range step manual 2 Spindle nose type A2-15" Spindle bore 254mm Spindle centre taper MT6 Number of Tool positions 8

Condition: good (used), Year of construction: 2000, Well-maintained, used CNC lathe from Okuma. Rjdpfezhal Hex Adrew Type: LT10-M Capacity: ø 210 x 130 mm Spindle bore: ø 53 mm Okuma OSP-U100L control system Further specifications can be found in the data sheet.

Condition: good (used), Year of construction: 2000, Used CNC lathe by Emco Padovani Type Emcomat E 300 x 3000 Fagor CNC control system Turning diameter over the bed: Ø 550 mm Turning diameter over the cross slide: Ø 340 mm Redpfxszhaixj Adrsw Distance between centers: 3000 mm Double chuck, front: Rota with quick-change jaws Spindle nose: Camlock 8 Maximum spindle speed: 2500 RPM Tool holder: 4-way Parat Gr. 3 Includes 2 steady rests, various tool holders, and chuck jaws.

Condition: used, Needs some attention and a new fan belt, otherwise it's in good condition. Rjdpfx Aozicgiedrow Accessories are shown in the photo.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. The machine was meticulously maintained by the previous owner. It was sold due to a factory closure Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. Rjdozhafyspfx Adrew As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Condition: good (used), ZMM SLIVEN CU 400 Control and lead screw lathe Distance between centers 1,500 mm Distance between centers 250 mm Turning diameter over bed 500 mm Turning diameter over slide 240 mm Spindle bore 72 mm 27 spindle speeds from 20-2,000 rpm Feed rate Y-axis 0.04-12 mm/rev Feed rate X-axis 0.02-6 mm/rev Travel X-axis 315 mm Motor power 7.5 kW Machine weight approx. 3,000 kg Equipment: Digital display MITUTOYO Tool holder 6 tool holder inserts 3-jaw chuck 250 mm Rjdpfx Adozib D Horsw All other accessories visible in the photos and video are not included in the scope of delivery and are therefore not part of this sale. The scope of delivery only includes the accessories explicitly listed here, in the order confirmation, and on the invoice. FCA (Free on Truck) D-32457 Porta Westfalica Packaging only Delivery time: immediate Subject to prior sale / Payment due immediately upon completion of purchase

Condition: used, Year of construction: 2003, Lathe DMG Type NEF 320 K Condition: Used Year of Manufacture: 2003 Control: SINUMERIK 810DE-L CCUO Cycles for taper turning and thread cutting Technical Data Swing over bed: 320 mm Swing over cross slide: 150 mm Chuck: 200 mm Cross travel: 150 mm Feed drive AC: 4 m/min Main spindle: Size 6 Spindle bore: 52 mm Spindle mounting: MK 6 Spindle front bearing diameter: 85 mm Drive power: 7 kW Max. torque: 320 Nm Speed range: 14 - 3550 rpm Gear stages: 2 Tool post: Multifix size B Quill: 70 mm Quill stroke: 120 mm Quill mounting: MK5 Dimensions Length / Width: 2600 mm / 1440 mm Weight: approx. 1440 kg Rsdpfxsyrggme Adrsw

Condition: ready for operation (used), FANUC circuit board. Redpfjzib Acex Adrew

Condition: defective spare-parts repository (used), Intended for use as a spare part. The drive mechanism is not functioning. Rsdpezibyuofx Adrsw

Condition: used, Year of construction: 1990, functionality: fully functional, turning length: 1,000 mm, turning diameter: 500 mm, spindle speed (max.): 2,500 rpm, spindle motor power: 37 W, torque: 1,450 Nm, chuck outer diameter: 315 mm, Equipment: documentation/manual, rotational speed infinitely variable, Voest Alpine Steinel Lathe WNC 500 S x 1000 Turning diameter: 500 mm Turning length: 1000 mm Control system: Sinumerik 810 T-GA 2 2-speed gearbox i = 4 Power: 37 kW at 100% duty cycle Max. turning torque: 1450 Nm Manual tailstock with clamping and coupling Max. speed: 2500 rpm Electronic handwheel For milling operations: hydraulically swiveling servomotor with 720 Nm and max. 18.5 rpm 12-position disc turret with live tooling, max. 3000 rpm at 4 kW Tool holder: VDI 40 Rodpfxsydfy Ns Adrjw Numerous tool holders VDI 40 for internal and external machining as well as live tooling, including some tools – e.g., internal turning tools – otherwise without tools!

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, turning diameter over cross slide: 630 mm, turning length: 780 mm, turning diameter: 480 mm, spindle bore: 90 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 5 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 830 mm, spindle motor power: 22,000 W, total height: 1,900 mm, total length: 3,600 mm, total width: 1,900 mm, feed rate X-axis: 30 m/min, feed rate Z-axis: 30 m/min, type of input current: AC, overall weight: 5,400 kg, swing diameter over bed slide: 630 mm, chuck outer diameter: 203 mm, center width: 780 mm, center height over cross slide: 315 mm, spindle nose: A2-6, bar diameter (max.): 76 mm, controller manufacturer: Fanuc, controller model: Fanuc 0i-TD, - Country of Manufacture: South Korea - Year of Manufacture: 2012 - Controller: Fanuc 0i-TD - Number of Turret Tools: 12 - Tailstock: has - Chuck Size: 8" - max Turning Diameter: 480 mm - Swing Over Saddle: 630 mm - Swing Over Bed: 760 mm - Machining Length: 780 mm - Bar Capacity: 76 mm - Spindle Bore Diameter: 90 mm - Max Spindle Speed: 3500 RPM - X Axis Travel: 260 mm - Z Axis Travel: 830 mm - Number of Axes: 2 - Spindle Power: 22 KW - X Axis Feed: 30 m/min - Z Axis Feed: 30 m/min Rsdpjzibvcjfx Adrjw * * Weight (kg):* 5400 * Length (mm): 3600 * Width (mm): 1900 * Height (mm): 1900

Condition: ready for operation (used), Year of construction: 1992, VTL SC Numerik CNC H 645 Chuck diameter – 1,450 mm Max. turning diameter – 1,650 mm Maximum workpiece height – 1,200 mm Rsdpezibuxofx Adrow Table speed – 2 – 200 rpm Working feed range – 0.1 – 400 mm/min Rapid traverse – 4,000 mm/min Main motor – 55 kW Weight – approx. 21 tons Video showing the machine in operation is available!

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: T40065, MACHINE SPECIFICATION Rjdpfx Adsq Atxysrew Maximum swing 510mm Maximum turned diameter 290mm Maximum turning length 540mm Bed inclination 60 degrees Spindle centre height (from floor) 960mm Spindle nose A2-6 Power chucking system Hydraulic Spindle bore 77.5mm Bar capacity - collet 66mm Maximum spindle speed 5000rpm Spindle motor power 22kW Rapid travers : Z/X Axis 30/25m/min Turret: Tooling type VDI 40 Number of tooling stations 12 Number of driven tool stations 6 Maximum rpm of driven tool 4000rpm Maximum power of driven tool 3.7kW Maximum collet size of driven tool 20mm C axis increment: Fully programmable 0.001 degrees Approximate net weight 4550Kg Machine Equipped with Fanuc 21i-T CNC Control System Hydraulic 3 jaw chuck 3 off Radial driven toolholders 3 off Axial driven toolholders 30 off Static toolholders Coolant system Lighting Interlocked guarding  

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: P40030, Used Harrison Alpha 460 Plus Gap Bed with 460mm swing x 1000mm between centres. Spindle bore 76mm. Equipped with Harrison/Fanuc GE Operator panel and screen. Very popular CNC Lathe. Specification Harrison Alpha 460plus Height of centres 230mm Distance between centres 1000mm Swing over bed 460mm Swing over cross slide 270mm Swing in gap 730mm Gap width from faceplate (approx) 216mm Spindle bored to pass 76mm Spindle speeds: Low range 2 to 500rpm High range 20 to 2000rpm Tailstock travel 145mm Tailstock diameter 95mm Tailstock taper No. 6 MT Approximate weight 2760kg Redpfsnxkcqsx Adrow Harrison Alpha 460 Plus Gap Bed CNC Lathe with Fanuc Machine equipped with 3 jaw chuck Quick change toolpost and 4 off toolholders Harrison/Fanuc GE operator panel and screen Stationary steady Guarding Lighting Coolant system

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 6V0148, MACHINE SPECIFICATION Height of centres 170mm Swing over bed 350mm Swing over cross slide 196mm Swing in gap 535mm Width in front of faceplate 165mm Bed length between centres 650mm Rodpfxswmm H Re Adrow Spindle speeds (infinitely variable) 15-3250rpm Spindle nose mounting (Camlock) D1-4 Spindle bore 42mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 100mm Travel of tailstock barrel 145mm Taper in tailstock barrel No. 4 MT Machine in Metric execution   MACHINE EQUIPPED WITH Acu-Rite 2 axis DRO System 3 Jaw chucks Quick change toolpost and 2-off toolholders Chuck guard Saddle mounted chip guard Coolant system Lighting Rear splashguard NB Machine ex Dyson apprentice training facility, in excellent condition