Used Ari Vislanda Ks 12 for sale (24,613)

Condition: used, mileage: 150,351 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: mechanical, first registration: 01/2003, emission class: euro3, color: white, brakes: retarder, number of seats: 11, Year of construction: 2003, Equipment: ABS, air conditioning, parking heater, Well-maintained MB Vario 814D, previously owned by a government agency/federal police. Configuration as a bus (group vehicle) MR / high roof with full climate control and auxiliary heater, ABS and differential lock on the rear axle, as well as a retarder, which is an electric, wear-free eddy current brake for adjusting the speed. The body has only minor signs of rust on the lower sill edges – but no holes. There is some blistering on the rear wheel arch, but this is not relevant for the technical inspection (TÜV). Technically, this Vario is in good condition and does not require any immediate repairs – it has been consistently maintained according to the service schedule. We have already replaced both starter batteries, and before the sale, we will replace the windshield with real glass, making it eligible for private registration. Thanks to its good insulation properties, the plastic glazing on the side windows and in the rear of the vehicle can remain. The air conditioning and auxiliary heater are functional and very effective: Lodpfszmqnpex Aftjrp 1.) The air conditioning system has two evaporators and vents above each seat in the passenger compartment. 2.) The auxiliary heater is a hot water circulating heater with convectors in the passenger compartment for draft-free heating. Maximum speed according to the vehicle documents: 120 km/h. A total of 11 seats, the seats in the passenger compartment are designed as reclining seats – with adjustable backrests and armrests, and the inner left seats can also be moved forward by approximately 10 cm on the console to provide more freedom of movement. A total of three effective roof vents. Interior dimensions from the driver's seat: 4000 x 1850 x 1900 mm (LxWxH). For an additional cost of 750 €, we can perform a technical modification to convert it into a recreational vehicle (SoKFZ Wohnmobil), which would involve removing some seats. Due to space constraints, up to 8 seats are possible in this configuration. In this context, the Vario will also receive a 220V external power connection. +++Errors, changes and prior sale reserved.

Condition: ready for operation (used), Seidel 66WKS-M310/45-V4 - 66WKS-M310/45-V4 servo amplifier, 12.1 kVA, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as per photos. Ledpfx Afji Ec Sxotorp

Condition: ready for operation (used), Siemens 6BK1000-0AE30-0AA0 Box PC 627-KSP EA X-MC, serial number: VPV6004312, without hard drive, serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lodpfxji Edino Afterp

Condition: ready for operation (used), Seidel 66WKS-M310/45-V4 – 66WKS-M310/45-V4 servo amplifier, 12.1 kVA, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of supply as shown in the photos. Lrsdpfx Afoi Ec S Ajtep

Condition: ready for operation (used), Seidel 66WKS-M310/45-V4 – 66WKS-M310/45-V4 servo amplifier, 12.1 kVA, serial number as shown in the photo, used, with normal signs of wear and tear, 100% functional, scope of delivery as per photos. Ljdpei Ec Susfx Aftsrp

Condition: new, Year of construction: 2025, Laser source: Raycus or Max: 4/6/8/12 kW Lrsdpfx Asi Apfzsftjp Laser head: 3D BOCI Control system: FSCUT 5000 A Chuck: 20-450 mm Loading/unloading: 12000 mm X/Y axes Positioning accuracy: ±0.05/1000 mm Repeatability: ±0.03/1000 mm Acceleration: 0.8g (m/s²) Rotational speed: 60 rpm Max. positioning speed: 60 m/min Max. weight of a tube: 1500 kg 1. Raycus 6000W laser source 2. BEVEL laser head 3. Welded frame DPL 4. Schneider electrical components 5. Helical rack KH 6. Techmech reducer 7. Yaskawa servomotor 8. SHAC guides 9. Integrated power control 10. FScut 5000 software 11. Integrated electrical cabinet 12. HANLI water chiller 13. Cantilever gantry axis-X FHBS 14. Automatic waste collection 15. Crawler-type automatic workpiece collection 16. Automatic support system 17. Loading frame 12000 mm 18. Unloading frame 12000 mm

Condition: used, machine/vehicle number: 007307, Max. working width: 3200 mm Max. working thickness: 60 mm Lrsdpsuaq D Ajfx Aftsp

Condition: used, Year of construction: 1993, machine/vehicle number: 931200665, Verpackungssystem - Wrapping & Shrinking Machines BVM SM4012 K-SC4030SYear 1993 - Serial-No. 931200665 Full automatic packaging SM 4012K Einlaufbreite max. 420mm / Infeed width max. 420mm Shrink tunnel SC4030S Lodsh Ax Hfjpfx Aftorp Format (Breite x Höhe) / Size (width x high) 450mm x 330mm 5m Chain gripper feeder Delivery band GUK Feeder for single sheets Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Year of construction: 2017, Power 13 KW clamping range 500 mm Lrjdsxx A D Hopfx Aftep voltage 400 V

Year of construction: 2008, condition: excellent (used), Power 13 KW Lodpfx Ajxx A Edefterp clamping range 500 mm voltage 400 V

Year of construction: 2018, condition: used, BECKER Air-Center VARIAIR type CS 0133.0112 year 2018 Provides compressed air, vacuum and air blast supply for a gathering machine. Configuration: - for up to 16 stations gathering machine Ledpfx Afszi Sc Tetorp - with control for automatic switching on and off Technical specifications: compatible with: KOLBUS ZU 822, ZU 832, ZU 842 gathering machine

Condition: used, Year of construction: 1999, Technical details: working area: 10700 mm Tube length: 300-11000 mm min. workpiece diameter: 80 mm max. workpiece diameter: 260 mm Power: 120 KW dimensions: 21,5 x 5 x 3,8 m mm weight: 90.000 kg Lrjdpfxovizuij Aftjp pre-turn capacity: 200 cdm/min HS Code: 8461 90 00 Description of the system Manufacturer / Type Vario 1200-11000 Year of manufacture 1999 Intended use peeling machine for pipes and solid material with ultrasonic measuring system for detection of wall thickness deviations and correction of the same. Machine control SIEMENS 840 D - 6 axes Max. speed on the scraper/peeling device: n = 200 min-1 *

Condition: used, mileage: 199,603 km, power: 221 kW (300.48 HP), first registration: 05/2020, fuel type: diesel, empty load weight: 7,850 kg, maximum load weight: 4,140 kg, overall weight: 11,990 kg, axle configuration: 4x2, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space volume: 36 m³, loading space length: 6,260 mm, loading space width: 2,490 mm, loading space height: 2,337 mm, Equipment: ABS, air conditioning, cooling unit, cruise control, differential lock, electronic stability program (ESP), onboard computer, sliding door, soot filter, tail-lift, Mercedes-Benz Atego 1230 E6 with Frigoblock refrigeration - Refrigerated box body - Dimensions (LxWxH, interior): 6.26x2.49x2.33 m - Refrigeration unit: Frigoblock FB-FIL2 - Tail lift - Portal door - Partition wall - Automatic transmission - Leaf/air suspension - Engine brake - Cruise control - Air conditioning - EURO 6 - Tires: 265/70R19.5 German vehicle. Good condition! Mercedes-Benz Atego 1524 E6 with Frigoblock refrigeration - Refrigerated box body - Dimensions (LxWxH, interior): 6.26x2.49x2.33 m - Refrigeration unit: Frigoblock FB-FIL2 - Tail lift - Partition wall - Automatic transmission - Leaf/air suspension - Engine brake - Cruise control - Air conditioning - EURO 6 - Tires: 265/70R19.5 German vehicle. Good condition! We speak English On parle français Мы говорим по-русски Mówimy po polsku Hablamos español Falamos português Parliamo italiano Errors and prior sales excepted. All information without warranty. Yourtrucks Group The Yourtrucks Group maintains business relationships worldwide. Both purchasing and sales extend beyond national borders, which is why our advertisements generally include the export price, as this is independent of the intended location of use. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures that it is regularly updated. This information should be regarded as non-binding general information and does not replace detailed individual advice when making a purchase decision. Only the provisions contained in the purchase contract are binding. Changes, errors, typographical errors and prior sales are subject to change. Our general terms and conditions apply exclusively. Languages: We speak English Ljdpfxozltqqo Aftorp On parle français Мы говорим по-русски Mówimy po polsku Hablamos español Falamos português Parliamo italiano

Condition: used, New: No Part suitable for: trucks Lsdpfx Ajzltn Asftjrp Price: On request Value Added Tax/Margin Scheme: VAT deductible Part number: 2232836

Condition: used, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 04/2003, loading space length: 9,380 mm, loading space width: 2,480 mm, loading space height: 3,300 mm, Equipment: ABS, Berdex OV 1218 | Car Transporter | Mobile Workshop | Team Lounge | LBW Internal No. for inquiries: 0726566 * Condition: very good * First registration: 04/2003 * Aluminum work platforms on the left and right * Permissible total weight: 30,000 kg * Unladen weight: 10,420 kg Lrsdpfxezllzze Aftjp * ABS * EBS * 2-axle air suspension * Interior lighting * 2 refrigerators * Lift tail lift with access ramps Dimensions (cargo area/loading area) Cargo area length: 9,380 mm Cargo area width: 2,470 mm Cargo area height: 3,300 mm Lounge/meeting room * Seating area and lift table * Air conditioning - Fujitsu * TV * Roof hatch / glass version Interior dimensions Length: 3,100 mm Width: 2,480 mm Height: 2,070 mm ----Price: 39,900 EUR + 19% VAT For further questions, you can reach us at the following telephone numbers: * We speak: German, English, French, Polish, and...? Typographical errors, errors and prior sale reserved.

Condition: used, mileage: 60,784 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: mechanical, first registration: 12/2002, emission class: euro3, color: white, brakes: retarder, number of seats: 11, Year of construction: 2002, Equipment: ABS, parking heater, Beautiful MB Vario 814D from official ownership / state police: +++ Bodywork thoroughly refurbished and partially repainted on the lower sections +++ Version configured as a bus (group transport vehicle) MR / high-roof with auxiliary heating, driver airbag, ABS, and differential lock on the rear axle, as well as a retarder. The retarder is an electric, wear-free eddy current brake for speed adjustment. Lsdsyxuv Dspfx Aftorp The bodywork was professionally repaired and then the rear section was partially repainted in our own workshop. We disassemble the vehicles beforehand and, for example, permanently seal the body seams with elastic material after painting. The chassis/frame of this Vario was also partially de-rusted and painted by us, and finally protected with wax for long-term preservation. Additionally, this Vario received a fresh inspection, including engine oil and brake fluid change, all four batteries replaced, and a new air dryer for the braking system. Furthermore, the plastic glazing in the cab was replaced with genuine glass. Due to their good insulating properties, the plastic windows were retained in the rear section. An ideal base for a spacious motorhome — the technical conversion to "So-KFZ Wohnmobil" registration (special-purpose vehicle/motorhome) can be carried out for you for an extra charge of €600. In this context, the vehicle would also receive an exterior 220V power connection with RCD/FI circuit breaker and two interior sockets. General information about the MB Vario 814D: The auxiliary heating works very efficiently: This is a hot water circulation heating system with convectors in the passenger compartment for draft-free heating. Top speed thanks to long axle ratio: according to paperwork, vmax 120 km/h. Total of 11 seats; the passenger compartment seats are comfortable recliners — with adjustable backrests and armrests. In addition, the left inner seats can be shifted about 10 cm into the aisle for more freedom of movement. There are three effective roof hatches in total. Interior dimensions from the driver’s seat: 4000 x 1850 x 1900 mm (L x W x H) +++ Subject to error, changes, and prior sale +++

Condition: used, Year of construction: 2018, Overview  This isobaric filler was manufactured in 2018 by the German company Leibinger, with the labelling system added in 2020 by ENOS. The system consists of a 12-head isobaric filler with 4-head crown capper, an ENOS C5000 labellier, and auxiliary equipment for packaging. It is designed for beer and other carbonated beverages and offers a complete solution from filling to labelling and carton sealing. The machines are immediately available. Technical data  Leibinger Filling and Capping Machine (2018) - Capacity: Up to 3,000 bottles/hour (330 ml) - Filling system: 12 counterpressure long-tube valves - Capping system: 4-head crown capper (26 mm) - Bottle format: 0.33 L (prepared) - Working pressure: 2.0 – 2.2 bar - Working temperature: 0 – 4 °C (optimal) - Oxygen pickup: 10–12 ppb dissolved oxygen - Vacuum system: Integrated CO₂ pre-evacuation and vacuum pump - Product pump: Included - CIP system: Automatic and programmable - Machine direction: Left to right - Construction: AISI 316L stainless steel - Electrical requirements: 400 V / 3PH+N+PE / 16 A / 50 Hz ENOS C5000 Labelling Line (2020) - Capacity: 2,000 – 6,000 bph Lsdpfx Afeyb S S Hjterp - Bottle formats: Cylindrical bottles, max. height 185 mm, max. length 300 mm - Labelling stations: 1 (option for second station) - Label type: Self-adhesive (also supports polypropylene labels) - Bottle infeed: Screw conveyor system - Sensors: Self-adjusting photocell for transparent labels - Control system: Processor board with inverter-based speed regulation - Output system: Smoothing unit with adjustable perforated belt - Transport system: 1.5 m conveyor with traction motor - Rotary tables: 1 infeed + 1 outfeed, both motorized - Electrical control: 3 inverters (for conveyors, labeller, and filler) BEA C26U Semi-Automatic Carton Sealer - Function: Seals top and bottom of cartons - Adjustments: Width and height adjustable - Conveyor: Plastic rollers, 1.5 – 4.5 m  

Year of construction: 2024, operating hours: 150 h, condition: used, functionality: fully functional, This stone separator can be used to remove rolling materials. Its primary application is for stone removal in compost, biomass, and screening overflow processing, where large quantities of stones can be separated. The best results can be achieved when used with a defined medium grain fraction (e.g., 40-80 mm). A magnetic deflector roller is installed for the separation of iron parts. The material is collected under the machine via the metal slide and can be caught in a hopper. Throughput: up to 50 tons per hour (i.e., approximately 100 tons/hour input for a screening machine, since only one fraction is being processed). Power connection: 16A CEE 5-pole three-phase plug. Weight: ~1.8 tons Dimensions: ~5m length; ~2m width Transport: Chain hoist with 4 crane eyes OR forklift attachment Adjustment: Conveyor belt speed via frequency inverter; inclination via crank. Lredszk Izzepfx Aftjp This is our demonstration machine, which is in used but very good condition. The installed suction hood and pressure nozzle can be purchased together to operate the stone separator in conjunction with an air classifier. This allows even light contaminants, such as plastic films, Styrofoam, etc., to be removed. In combination with the TUKWIND PRO 18 air classifier (separate listing), you have a complete solution for contaminant removal.

Condition: used, mileage: 86,725 km, power: 300 kW (407.89 HP), first registration: 04/2024, fuel type: diesel, number of seats: 57, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), fog lights, power assisted steering, traction control, = Additional options and accessories = Ledpsy Hwh Sjfx Aftorp - Armrests - Autoradio - Climate control - Double glazing - EBS - Electrically operated mirrors - Head rests - Hydraulic power steering - Individual air cooling - Individual lighting - Reverse camera - Seat-belts - Sun visor - Tachograph - TV/Video = More information = Engine capacity: 10.800 cc Make of engine: DAF

Condition: used, mileage: 122,848 km, power: 95 kW (129.16 HP), first registration: 10/2013, fuel type: diesel, empty load weight: 4,250 kg, maximum load weight: 3,340 kg, overall weight: 7,490 kg, axle configuration: 4x2, wheelbase: 4,200 mm, brakes: engine braking, color: green, driver cabin: other, gearing type: mechanical, emission class: euro5, number of seats: 3, loading space length: 4,500 mm, loading space width: 2,450 mm, loading space height: 1,800 mm, Equipment: ABS, cabin, power assisted steering, tail-lift, * German vehicle * Condition: see photos * Only 122,848 km * Tarpaulin on the left and right * Tail lift MBB 1000 AQ * Length 4,500 mm x 2,450 mm x 1,800 m height * Wooden floor * DIN lashing eyes * Light-transmitting tarpaulin roof * Spare wheel holder * Spare wheel * Cab with 3 seats * 6-speed manual transmission * Stereo CD * Electric windows * Leaf spring suspension * Electric engine brake * Gross vehicle weight (GVW) 7,490 kg * Unladen weight 4,250 kg * Payload 3,340 kg Lrjdpfx Afozkvvtetop * Wheelbase 4,200 mm If a new TÜV (technical inspection) is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV (German Social Accident Insurance) inspection, a new SP (safety inspection), or a new UVV (accident prevention regulations) inspection. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods so that the buyer does not have any false ideas about the condition and suitability. Inspections and examinations are possible at any time by prior appointment and are expressly desired. All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: used, Year of construction: 2023, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: L0098, table height: 1,000 mm, table width: 195 mm, total width: 1,500 mm, total length: 3,500 mm, total height: 2,150 mm, spindle speed (min.): 750 rpm, table length: 3,250 mm, spindle speed (max.): 6,000 rpm, number of spindles: 8, rotational speed (min.): 750 rpm, rotational speed (max.): 6,000 rpm, drill chuck size: 11 mm, workpiece weight (max.): 1,200 kg, operating pressure: 8 bar, air demand: 15 m³/h, KS Maschinenbau - KS LBM DB 04 DR For sale is a row drilling machine, also known as a strip drilling machine. The row drilling machine KS LBM DB 04 DR is designed for drilling strips and guide rails made of aluminum, plastic, and wood, as well as roller shutter end strips (for wood profiles up to 3 meters long and up to 90 mm in height). The machine is equipped with 4 pairs of three-phase drilling units. Four holes each can be drilled simultaneously or with a time delay from above and below. The spacing between the drilling units is manually adjusted using an indexing system for various distances. The index holes are fitted with drill bushings into which the hardened index pins are centered. The offered strip drilling machine comes with 8 drill heads (4 oriented downwards, 4 upwards). We have used this machine in our workshop to drill wooden fence profiles. It has provided us with reliable service over the past few years. As our customer is switching to plastic profiles, we no longer have use for it. This machine configuration includes 8 extraction adapters for chip extraction, along with hoses and a manifold for customer-side extraction. Further videos and technical data about this machine series can be found at the following link: Ledpfoywtxbex Aftorp ksschulten.com/en/products/drilling-machines/strip-drilling-mach ine-ks-lbm/video.html The machine's operating manual is of course still available.

Condition: new, Safety valve ARI for steam systems. Ledezbr Rvopfx Aftorp

Condition: used, Strainer, flange strainer, filter, coarse or fine sieve Ledpfxed I I Hzo Afterp -Connection: DN50 -Nominal pressure: PN16 -Width: 230 mm -Price: per piece -Number: 2 pieces -Dimensions: 230/165/H225 mm -Weight: 10.8 kg/pc.

Condition: used, Relay, contactor, semiconductor contactor, contactor, coupling relay, relay module, interface relay -Manufacturer: Phoenix Contact, relay module -Type: EMG 22-REL/KSR-24/21-21 -Manufacturer Part No.:2950323 -Number: 9x relays available -Price per piece -Dimensions: 75/25/H60 mm -Weight: 0.1 kg/piece Ledpfx Afjtvhtdotjrp

Condition: used, Micrometer screw, outside micrometer screw, precision micrometer screw -Manufacturer: KS, Micrometer: Precision micrometer screw -Measuring range: 500-600 mm -Reading: 0.01 mm -Locking device Lrodpfx Ajt Uwyhsftjp -Standard: TGL 150 46 -other sizes: also available -Dimensions box: 880/545/H50 mm -Weight: 6.2 kg