Used Veb Record Snd 160 for sale (8,102)

Condition: good (used), Year of construction: 1978, Offer 26129 Kdodpfx Ahjz Erbfobju Technical data: - Max. load capacity approx. 250 kg - Drum dimensions approx. W 450 x D 600 mm - Drum capacity approx. 80 l - Drum opening with cover lid - Inside of the drum is rubberized - 2 speeds - Motorized tilting of the drum - Drive 400 V / 2.3 kW - Space requirement approx. W 1000 x H 1800 x D 1600 mm - Weight approx. 500 kg

Year of construction: 1989, condition: used, Technical details: Pressure max.: 30 MPa Kdedsu Nft Hspfx Ahbju volume flow rate: 70 cbm/min. electrics - voltage/frequency: 380 / 3Ph ~ V/Hz tank capacity: 50 dm³ l machine weight approx.: 120 kg connected load: 0,62 kW dimensions L x W x H: 0,7 x Ø 600 x 1,3 m Application: Pressing grease into grease nipples Size of grease reservoir: 460 x 620mm Size of the press Ø 345 x 540mm Connection via bayonet mount Handling/operation with hand gun and 3.8 metre hose with ON/OFF switch The grease gun is mobile, equipped with handrail with two-hand grip and 220 V socket. *

Year of construction: 1975, condition: good (used), functionality: fully functional, drive type: Diesel 130 Kw, Patrol boat from the former GDR, later used by the Berlin Water Police (WSP 1), IFA 6-cylinder diesel engine. Winter-capable, icebreaker rating up to 3 cm thickness, certified for all waters including open sea. Dimensions: 11.90 m length, 2.90 m beam, draft 0.90 m. Top speed: over 30 km/h. Engine: Schönebeck 6-cylinder, 4-stroke diesel, type DM 6 VD 14.5/12-1. According to research, the engine delivers either 170 or 220 HP from 10 L displacement. These engines are known for low fuel consumption: at canal cruising speeds (8–12 km/h), consumption is 6–8 L per hour. Equipment includes signal mast, mast spotlight, boat lighting. Dual helm positions: inside cabin and flybridge. AGM batteries, engine start with 24 V system, 12 V onboard network. Brand new onboard toilet. Electric and manual bilge pumps (automatic/manual operation). Complete overhaul from 2021 to 2023: 5-layer primer and 3-layer antifouling coating. Steel hull, aluminium superstructure. New electrical wiring, new exhaust system, new clutch, engine overhauled, fuel tank serviced, new lines installed, new air filter. Engine starts and runs flawlessly, forward and reverse gear shifts without issues. Some work is still required to complete comfort features. The vessel is suitable as a small tugboat or as a work or fishing boat. Kjdpfx Aey D Rk Ijhbsdu Lower helm station: the gauges still need to be installed; required instruments and switches are included.

Condition: used, Technical details: Pressure: 160 t slide stroke: 32...140 mm no. of strokes: 50 Hub/min throat: 400 mm Kdedpfeu N Dfhjx Ahbju dayligth: 400 mm adjustment of ram slide: 100 mm table-size: 1000x750 o. Aufspannplatten) mm ram surface area: 850x630 mm tool shank hole: 400x360 mm total power requirement: 15,5 kW weight of the machine ca.: ca. 10,5 t dimension L-W-H: E-Schrank 1,06x0,6x2,0 mm dimensions L x W x H: L:2,9 x B:1,25 x H:3,3 m - single and /or continuous stroke possible - 80A; Air pressure 6kp/cm²; Oil filling approx.30 Liter - 2 clamping plates (1200x760x90mm and 1200x760x70mm faucet hole dia=300mm) - foot control or manual via hand possible - last check record was 2006 can be demonstrated under power! i.D. *

Condition: used, Year of construction: 2011, clamping force: 1,600 kN, screw diameter: 45 mm, clearance between the columns: 520 mm, injection pressure: 1,914 bar, injection weight: 294 g, mold height (min.): 275 mm, ejector force: 59,000 N, ejector stroke: 160 mm, total length: 5,410 mm, total width: 1,660 mm, total height: 2,140 mm, overall weight: 7,090 kg, Used Sumitomo (SHI) Demag Systec 160/520-600 injection molding machine, manufactured in 2011. Technical specifications: - Clamping force: 160 t (1600 kN) - Injection unit: 600 - Screw diameter: 45 mm, L/D 20 - Specific injection pressure: 1914 bar - Injection volume: 323 cc - Injection shot weight: 294 g - Cylinder heater power: 11.3 kW - Tool plate dimensions: 770 x 770 mm - Distance between columns: 520 x 520 mm - Tool height (min.): 275 mm - Opening stroke: 500 mm - Maximum distance between plates: 1085 mm - Ejector force: 59 kN - Ejector stroke: 160 mm - Weight: 7090 kg - Dimensions (L x W x H): 5.41 x 1.66 x 2.14 m - Control system: NC5 Equipment: - NC5 control system with color screen - Screw Ø 45 mm, L/D 20 - 5-zone hot runner control Ksdjz T Iufepfx Ahbedu - Air blow valve on the moving platen - Clamping force adjustment - Active mold protection (activeProtect) - Demag robot interface - WC5 remote service - Process data logging and statistics - Reinforced oil cooler

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, number of ink cartridges: 8, number of print heads: 1, Mimaki JV200-160 64inch Solvent Printer. Year 2025 Like new! In very good condition. Can send a video in operation printing. Machine can be inspected and tested in warehouse in Tadley Reading. Recently been serviced by Main dealer. Comes with PC, Paid Licence, Monitor. Kedpfx Asz Idfbehbedu

Condition: good (used), Cauhe S-IV A 120×160 Hot Stamping Press The machine is fully operational, like new. Made in Spain. Format: 1200x1600mm Weight: 10,000kg Kjdpfszz Hg Dox Ahbjdu Power supply: 380V Motor: 11 kW Impact force: 2 Tm/dm² Equipment: – Pneumatic clutch and brake – Control panel – Full-format heating plate with 3 heating sections – 3 operating modes: continuous, time-delayed, manual – 3 independent foil feeds – Central automatic lubrication – Additional safety guards – Operating tools – Press plate

Condition: used, * Single Facer * Width 2050 mm * New adhesive and grid walls * New corrugated rollers from Friese Kjdpfeztng Nsx Ahbedu * New steam heads * New condensate valves * Overhead line bridge also available

Condition: used, Year of construction: 1977, Technical details: grinding wheel diameter: 200 mm revolution per minute: 3000 U/min with handrail: verschiebbar 30mm current type: 220V / 380V total power requirement: 900 Watt weight: 149 kg dimensions L x W x H: 0,4 x 0,5 x 1,2 m Kdedpfx Aheu Nguxebeu Double grinding block Main switch - On/off switch Connection for dust extraction Currently attached grinding wheels: Ø 140 x 25 and Ø 150 x 25 mm *

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 03-99-276, total height: 1,700 mm, total width: 1,000 mm, total length: 4,000 mm, overall weight: 810 kg, number of blades: 2, input voltage: 400 V, nominal power: 4 kW (5.44 HP), - color white - Year 1999 - Condition used - Buy as it is (no maintenance will be given by us) Kodpfx Ahswut Dfebsdu Supply Conveyor Track is about 2000mm long Simple machine but effective Transport not included.

Condition: used, Technical details: grinding wheel diameter: 200 mm Kdedpsu Ngu Ssfx Ahbju voltage: 220 380 V / Hz revolution per minute: 3000 U/min total power requirement: 900 Watt weight: 22 kg dimensions L x W x H: 0,23 x 0,46 x 0,25 m Double sanding block; table-top unit with sanding supports left/right, horizontally adjustable 30mm max. sanding discs Ø 200mm max. grinding wheel thickness 32mm currently clamped sanding discs on the sanding block: left = Ø 190mm x 30mm type H50 and right = Ø 180mm x 32mm type M20 *

Condition: used, Year of construction: 1986, Technical details: sheet width: 650 mm coil weight: ca. 2 t coil internal diameter: 350 - 570 mm electrics - voltage/frequency: 380/50 V/Hz total power requirement: ca. 1,5 kW weight of the machine ca.: 2,0 t space requirements approx. LxWxH: 1,8 x 3,0 x 1,9 m Coiler with Feeding Device - Sizes of coiler: W:1,20 x D:1,10 x H:1,60m - Roll distance: 0 - 5,5 mm - Rolls turning rate: min.:4,3 rpm, Max.:43 rpm - Rolls dia.: 100 mm - Feeding min.: 1350 mm/min, max.:13500 mm/min - Sizes of feeder: W: 1,30 x D:0,90 x H:1,90m Kdjdpfx Ahou Icgusbju Machine can be demonstrated under power. i.D. *

Condition: used, Technical details: max. dia. of grinding wheel: 175 mm revolution per minute: 2750 m/sec. boring diameter: 20 mm number of stations: 2 Stück total power requirement: 0,4 kW weight: 15,4 kg Ksdsu Ngtbopfx Ahbodu space requirements of the machine approx.: L:380xB:252xH:270 mm technical data: - 4 holes Dm= 10mm are available at the base for mounting on the worktable. - VEM CS 175 motor with 220/380V-50Hz; (1,9&1,1A) Protection class P33, - connector plug CEE 16 Equipment: - with grinding surface and grinding protection on both sides On sale as is!, without test run! *

Condition: good (used), Simplacutter model IV 110×160 Cauhe die cutter The machine is fully operational, like new. Made in Spain. Frame size: 1100×1600 mm Sheet size: 1160×1680 mm Weight: 8500 kg Power supply: 380 V Kdodpfez Dtb Dox Ahbeu Installed power: 7.5 kW Impact force: 350 t Equipment: – pneumatic clutch and brake – control panel – two frames – 2 operating modes: time-delayed, manual – central lubrication – additional safety guards – safety pressure mats – operating tools – hard sheet metal

Condition: good (used), Year of construction: 2007, operating hours: 9,500 h, functionality: fully functional, overall weight: 4,000 kg, Equipment: documentation/manual, Hwachon Cutex-160 CNC lathe | Fanuc | C-axis | 4 driven tools | Fedek bar feeder For sale is a Hwachon QTX 160 CNC lathe, manufactured in 2007, with Fanuc control and extensive equipment. The machine comes from a small production facility/workshop and is available immediately. It offers a versatile range of features for the precise machining of workpieces and is suitable for both individual parts and small to medium-sized series. Technical data: * Manufacturer: Hwachon * Model: Cutex 160 * Year of manufacture: 2007 * Control: Fanuc * Max. turning diameter: approx. 300 mm * C-axis: available * Driven tools: 4 * Tailstock: available * Chip conveyor: available * Tool turret: including the tools shown in the pictures Including Fedek short bar feeder Kodpfxez Nqdzj Ahbedu A Fedek short bar feeder is also included in the offer. The bar feeder is fully functional and can, of course, be demonstrated and tested during operation during an inspection. Condition and availability: The machine is operational and available immediately. An inspection and demonstration are possible after prior arrangement. Interested parties have the opportunity to inspect the machine on-site and be convinced of the functionality of the machine and the bar feeder. An interesting complete solution for companies looking for a compact CNC lathe with C-axis, driven tools, tailstock, chip conveyor, and automatic bar feeder. Inspection / demonstration: by appointment Availability: immediate

Condition: excellent (used), IM Very good condition. Kdsdpfxozkvh No Ahbeu

Condition: used, Year of construction: 2016, Aumann LWS/K 6-160 linear winding machine / production system for niQ stators, year of manufacture 2016. Two identical machines are available. Technical data: compressed air connection 5 bar, mains fuse 32 A, rated current 7.2 A, operating voltage 3 x 400 V / N / PE, 50 Hz, control voltage 24 V DC, connected load 5 kVA. Dimensions approx. 1,950 x 1,970 x 2,150 mm (L x W x H). The machines are offered including documentation. An on-site inspection is possible by appointment. Kdsdpfjz I Dc Hox Ahbju

Condition: used, Trailers, construction machinery trailers, GRP body, trailer cover box, cover for emergency power generator, fiberglass hood -GRP construction: used as a cover for emergency power generator -Internal dimensions: 1600 x 1070 mm -Dimensions: 1780/1550/H900 mm -Weight: 55 kg Kodpfx Ahoz Hvmzjbjdu

Year of construction: 1987, condition: ready for operation (used), 5 metalworking machines from various manufacturers are offered. 1) Column drilling machine VEB BS16, year of manufacture: 1960, weight: 110kg. 2) Milling machine Fritz Werner. 3) Pillar drilling machine Infratirea 4GC02502, year of manufacture: 1987. 4) Pillar drilling machine Infratirea, year of manufacture: 1987. 5) Radial drilling machine Tianjin No. 4 Z3063×20. Kdsdpezqfxdefx Ahbsu

Condition: used, operating hours: 14,808 h, total height: 2,850 mm, total length: 9,000 mm, total width: 2,450 mm, Year of manufacture: 2006 Colour: White Empty weight: 4.000 kg Kodpfe Aazv Usx Ahbjdu - Machine available from: 2026-07-10 - Year: 2006 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: AA1/015406 - Operating hours: 14808 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Min. spindle speed [rpm]: 600 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 11 - - C-axis present: Yes - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes - Tool changer positions [pcs.]: 16 - System/software: Xilog plus - Safety feature: Safety mat - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 250 - CNC options: Manual control, Offcut conveyor - CNC documentation available: User keys/licenses - Table length [mm]: 3050 - Table width [mm]: 13 - Working range X [mm]: 3110 - Working range Y [mm]: 1300 - Z-axis working range [mm]: 200 - X-axis maximum stroke [mm]: 3500 - Y-axis maximum stroke [mm]: 1815 - Z-axis maximum stroke [mm]: 440 - Installed length [mm]: 4600 - Installed width [mm]: 6500 - Installed height [mm]: 3400 - Transport dimensions: 9000mm x 2450mm x 2850mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Magnet dimensions: 60 x 20 cm, working area: 22 x 65 cm Kedsy Ittgopfx Ahbsdu

Condition: excellent (used), Weight: 760 kg Throat depth: 68 cm Table length: 115 cm Table width: 70 cm Kdodezkkr Aspfx Ahbsu Cutting height: 10 cm Angle adjustment Motor: 4 kW

Condition: used, Year of construction: 1974, Technical details: total power requirement: 1,65 kW weight of the machine approx.: 620 kg Kdedowqplkspfx Ahbsu Saw Blade Sharpening Machine Machine not complete - grinding spindle motor missing! for sale as spare part dispenser! *

Condition: used, Technical details: saw blade diameter: 250 mm grinding wheel hole diameter: Ø 25 feed - manual: per Hand mm Cutting height: max. 70 mm current: 8,5A / 50Hz / 220V A/Hz/V table-size: L:520 x B:500 mm dimension machine xH: 0,6 x 0,6 x 0,9 m Sale at sales price as spare parts dispenser, non-functional no UVV conformity (accident prevention regulations) * Kdjdpfxou Nif Tj Ahbeu

Condition: used, VEB Polygraph 882/2-18 gathering machine 18 gathering stations Features suction feeding Ksdpfxox Ab Ncs Ahbedu 3-phase power, requiring 2-10 kW of power consumption at 440 V