Used Thurmetall Tm Classic for sale (2,409)

Condition: used, Keba temperature card TM 450/A Kemro K2-400- suitable for Engel CC200 control unit - removed from running machine Ledpfx Aijw Ah Nfjiorn - fully functionalmanufacturer: Keba type: TM 450/A Kemro K2-400 manufacturer no.: 054492

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Classic 2S Year of manufacture: 2004 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm Travel distances U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in the bath) / 450 (without the bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Lodpfx Ajzcaxkjiiern Wire EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Includes AGIEJOGGER handbox for convenient setup AGIE IPG generator AGIEVISION control Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg After receiving your order, our machines are cleaned and fully overhauled. Subsequently, a test cut is performed to achieve the best possible surface finish for acceptance. You will receive a 6-month warranty on the machine. We would be happy to offer on-site commissioning and training.

Condition: used, Year of construction: 2018, operating hours: 5,596 h, Equipment: ABS, all wheel drive, -GERMAN VEHICLE -SOLID RUBBER TIRES -SELF-DRIVING WORK MACHINE, SEE INSPECTION REPORT -CABIN: PORS/FOPS -LIFT ARM WITH WHEEL LOADER ATTACHMENT AND TWO HYDRAULIC AUXILIARY CIRCUITS -HYDR. REVERSING FAN FOR AIR CONDITIONING SYSTEM -DRIVER'S SEAT: AIR-SUSPENDED -BUCKET TYPE: BUCKET 240 HDXL, VOLUME 1 CUBIC METER OPERATIONAL DATA JCB TM 320 T4F (HOMEPAGE) ? Model: JCB TM 320 T4F Lrjdpfxjzdxcvo Aiisn ? Machine Type: Telescopic Wheel Loader ? Application Areas: Agriculture, construction, recycling, industry and handling operations Engine & Performance ? Engine: 4.4-liter JCB EcoMAX T4F engine ? Emission Standard: Tier 4 Final / Stage IV ? Engine Power: 93 kW / 125 hp ? Maximum Torque: 550 Nm at low engine speeds ? Exhaust Aftertreatment: SCR technology with AdBlue, without diesel particulate filter Drive & Transmission ? Transmission: 4-speed powershift transmission ? Torque Converter Lockup: TorqueLock ? Maximum Speed: up to 40 km/h ? Drive: permanent all-wheel drive ? Differential: locking differential Lifting Capacity & Hydraulics ? Rated Load Capacity: 3,200 kg ? Maximum Lifting Height: approx. 5.20 m ? Maximum Forward Reach: approx. 2.95 m ? Hydraulic System: Load-Sensing Hydraulics ? Hydraulic Flow Rate: 140 l/min ? Breakout Force: 62.6 kN Dimensions & Weight ? Operating Weight: approx. 8,142 kg, depending on equipment and tires ? Overall Length: approx. 6.32 m including standard bucket in transport position ? Overall Width: approx. 2.35 m ? Height to Top of Cabin: approx. 2.72 m ? Wheelbase: 2.55 m ? Turning Radius: approx. 4.35 m ? Articulation Angle: ±43° * Fuel Tank Capacity Diesel: 160 liters Brief Description ? The JCB TM 320 T4F combines the maneuverability of a wheel loader with the reach of a telescopic handler. ? Thanks to its high lifting capacity, powerful engine and good maneuverability, the machine is ideal for professional applications. ? The permanent all-wheel drive and the powerful hydraulics ensure reliable performance even in demanding operating conditions.

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 341883, TECHNICAL SPECIFICATIONS Capacities: Maximum turning diameter 270 mm Maximum diameter above the cross slide 160 mm Center height above the cross slide 83 mm Maximum diameter above the machine bed 430 mm Turning length (depending on equipment) 630 mm Headstock: Standardized spindle nose, for the use of various chucks and mandrels with adapter accessories. Accessories for SCHAUBLIN chucks B45/F66 Maximum bar capacity, dia. 36 mm/60 mm Automatic chuck, standard dia. 210 mm Direct drive by AC motor, power at 100% / 50% duty cycle 15/18.5 kW Maximum torque at 100% / 50% duty cycle 135/165 Nm Maximum spindle speed 4000 min-1 Spindle positioning, increment 0.1° C-axis: Programmable increment 0.001° Spindle lock 80 Nm Pneumatic clamping cylinder 3400 daN Cross slide: Transverse travel, X-axis 230 mm Resolution along the radius 0.0005 mm Drive by AC motor, rated torque 3 Nm Ball screw, X-axis pitch 32 x 5 mm Longitudinal travel, Z-axis 720 mm Resolution 0.001 mm Drive by AC motor, rated torque 6 Nm Ball screw, pitch 32 x 10 mm Feeds: Working feeds, X/Z axes, stepless 0-5000 mm/min Rapid traverse rates, X/Z axes 8/10 m/min Feed force, X/Z axes 420/670 daN Lrsdpfxszb U Eps Aiion Turret system: Number of tool stations 12 Number of rotating tool stations 6 Drive by AC motor, intermittent duty power 3.7 kW Maximum intermittent torque 36 Nm Maximum drive speed 5000 min-1 Standardized tool holder 0VDI 30 Maximum cross-section of cutting tools 20 x 20 mm Integrated coolant system Indexing in both directions of rotation Coolant system: Tank capacity 120 liters Pump flow rate 10 l/min Pressure 5 bars Inventory 2230043 including: 1 Fanuc 18i control unit 1 A2-6 headstock 1 VDI 30 turret with 12 positions for 6 rotating tools 1 pneumatically operated steady rest 180-65.200 1 SCHUNK Rota-s 200-52 A2-6’’ 1x3 jaw chuck 1 Brucker CM5 rotating center 1 ESX-25 radial drilling and milling head, max speed 5000 min-1, without collet EX ref 4100.00552 1 ESX-25 axial drilling and milling head, max speed 5000 min-1, without collet EX ref 4100.00550 1 KENNAMETAL ESX-25 dito, without collet EX 1 EWS ESX-25 dito, without collet EX 4 radial tool holders, short, left-hand, Form B2 ref 4100.0100 1 ESX-25 tool holder, Form E3 with EX25 collet and Ø 5 mm collet 1 dito without EX25 collet 3 threading collets Ø 4.5 – 6 and 8 mm 1 tool holder for indexable insert drills, bore Ø 40 mm, Form E1 ref 4100.00124 1 dito bore Ø 32 mm ref 4100.00107 1 dito bore Ø 20 mm ref 4100.00105 1 boring bar tool holder, bore Ø 8 mm, Form E2 ref 4100.00108 1 dito Ø 10 ref 4100.0109 1 dito Ø 12 ref 4100.0110 2 dito Ø 16 ref 4100.0111 1 dito Ø 20 ref 4100.0112 1 dito Ø 25 ref 4100.0113 1 dito Ø 32 ref 4100.0115 1 dito Ø 32 GARANT, long 5 steel protection plugs, Form Z2 ref 4100.00130 1 axial tool holder, left-hand, force C4 ref 4100.00103 1 CM 5 pneumatically operated steady rest ref 180-65.200 1 separate support for microscope ref 180-60.005 1 coolant system OPTION 1 3-jaw hinged center for Ø 30 – 120 mm ref 180-70.200 CHF 2'500.-- + VAT Unless otherwise stated, the technical data is provided without guarantee.

Condition: ready for operation (used), Year of construction: 2008, Koenig Classic Rex Futura bun roll line Konig Classic Rex Futura T5 bun roll machine 5-pocket max. cap 7500 pcs/h piston size SK51+SK67 weight range 22-125 grams Siemens Simatic Touch panel setting device year of build 2008 Lredpfezdtqzox Aiion pictures BEFORE cleaning

Condition: used, mileage: 708,743 km, power: 302 kW (410.61 HP), first registration: 02/2012, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 6x2, wheelbase: 6,460 mm, fuel: diesel, brakes: engine braking, color: silver, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: air, total length: 10,330 mm, total width: 2,550 mm, loading space length: 6,400 mm, loading space width: 2,510 mm, loading space height: 1,160 mm, Year of construction: 2012, Equipment: ABS, AdBlue, central locking, crane, differential lock, electric window regulation, traction control, trailer coupling, = Additional Options and Accessories = - Remote-controlled central locking - Refrigerator - Air suspension - Tow hitch - PTO (Power Take-Off) - Radio - Disc brakes - Sun visor - Tool box = Notes = Palfinger PK 42002 SH Scanreco radio remote control. 4 x hydraulic outriggers. 5 x hydraulic extension. 4.30 m - 8,700 kg. 6.00 m - 6,100 kg. 7.80 m - 4,600 kg. 9.70 m - 3,550 kg. 11.70 m - 2,900 kg. 13.90 m - 2,450 kg. = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/55R22.5; Steered; Tire tread depth left: 50%; Tire tread depth right: 50% Rear axle 1: Tire size: 315/70R22.5; Dual tires; Tire tread depth left (inner): 50%; Tire tread depth left (outer): 50%; Tire tread depth right (inner): 50%; Tire tread depth right (outer): 50% Rear axle 2: Tire size: 315/70R22.5; Tire tread depth left: 50%; Tire tread depth right: 50% Weights Unladen weight: 18,050 kg Payload: 6,950 kg GVW (Gross Vehicle Weight): 25,000 kg Functional Crane: Palfinger Maintenance APK (Technical Inspection): Valid until 02/2027 Identification Lrodpjzdrqyjfx Aiion Model number: ACTROS 2541 6x2 / PALFINGER 42 t = Company Information = ALL PRICES ARE NET FOR EXPORT. (Joris Versteijnen NL-DE-GB) (Wouter Greutink NL-DE-GB-ES-IT) (Govorim po ryccki) We make every effort to provide accurate information, but no rights can be derived from the information provided.

Condition: new, Machining center with 4 CNC-controlled axes for machining profiles made of aluminum, PVC, and steel Comparable to Emmegi, Elumatec, Fom, Pertici, etc. Machine frame in a stable welded construction, stress-relieved by annealing, with hardened linear guides Protective cabin covering the entire machining length Pneumatically opening protective door Milling spindle: 3.8/4.6 kW S1/S6 3.0/3.7 Nm S1/S6 max. 18,000 rpm, air-cooled with ISO 30 tool holder with minimum quantity lubrication system for the tools with level monitoring Tool magazine: 5 positions, on the left side in the machine bed, for holding drilling, milling, threading tools, angle head, and disc cutters up to Ø 150 mm Workpiece clamping: 4 pneumatic profile clamps, clamping range up to 250 mm automatic positioning via device on the Z-axis Workpiece positioning: one pneumatic reference stop each on the left and right on the A-axis Travel distances: X-axis 3500 mm Y-axis 370 mm Z-axis 348 mm A-axis ±90° Travel speeds: X-axis 70 m/min. Y-axis 30 m/min. Z-axis 30 m/min. A-axis 60°/sec Maximum working areas: X-axis 3270 mm Y-axis 250 mm at 0°, 116 mm at ±90° of the A-axis Z-axis: 170 mm at 0°, 200 mm at ±90° of the A-axis Operating software: CAD/CAM in 3D technology (option, included!) Programming system according to ISO standard Functionality: Linear and circular interpolation on two axes (X-Y) Three-sided machining by swiveling the A-axis 90°-0°-90° End face machining using disc cutters Operating modes: One profile bar over the entire machining length Two profile bars in divided machining length Lubrication system: Automatically controlled central lubrication for all axes, ball screws, and guides, with level monitoring Operation: 18.5" TFT Mouse + keyboard Connection data: Electrical: 400 V/50 Hz (3-phase + N + PE), 16 A, Delivery without power cable Pneumatic: Pressure 6 - 8 bar Dimensions and weight: Length: 5800 mm Width: 1640 mm Height: 2000 mm Lredjwrcwpjpfx Aiisn Weight: 2000 kg incl.: Graphical programming software CM3D/CAD3D Barcode reader Teleservice with remote maintenance/diagnosis for 1 year after commissioning

Condition: used, mileage: 204,500 km, power: 478 kW (649.90 HP), first registration: 04/2018, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 8x4, wheelbase: 4,400 mm, fuel: diesel, brakes: engine braking, color: yellow, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: other, Year of construction: 2018, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, fridge, parking heater, traction control, = Additional Options and Accessories = - Remote central locking - Air suspension - Hub reduction - PTO (Power Take-Off) - Radio - Rear view camera - Sun visor - Spotlights - Auxiliary heater - Toolbox = Notes = Copma 1150.8 JIB J6 Year 2018 Winch Hydraulic outriggers Lredpfxsyxn S Ej Aiisn Hydraulic extensions 8 + 6 Scanreco radio remote control 4.52 m - 19,400 kg 6.10 m - 14,100 kg 7.72 m - 10,800 kg 9.47 m - 8,500 kg 11.22 m - 7,000 kg 13.82 m - 5,700 kg 15.20 m - 4,900 kg 17.15 m - 4,300 kg 19.52 m - 3,760 kg 22.50 m - 2,450 kg 23.90 m - 2,300 kg 25.50 m - 2,030 kg 27.20 m - 1,510 kg 29.00 m - 1,180 kg 30.90 m - 960 kg 32.80 m - 720 kg = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Front axle 1: Tire size: 385/55R22.5; Steerable; Tire tread depth left: 40%; Tire tread depth right: 40%; Suspension: Leaf spring suspension Front axle 2: Tire size: 385/55R22.5; Steerable; Tire tread depth left: 70%; Tire tread depth right: 70%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 315/70R22.5; Dual tires; Tire tread depth left inner: 80%; Tire tread depth left outer: 80%; Tire tread depth right inner: 80%; Tire tread depth right outer: 80%; Suspension: Air suspension Rear axle 2: Tire size: 315/70R22.5; Dual tires; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70%; Suspension: Air suspension Weights Unladen weight: 27,417 kg Payload: 9,583 kg GVW (Gross Vehicle Weight): 37,000 kg Functional Crane: Copma Financial Information Price: Upon request Identification Model number: FH16 650 8x4 / 115 tm CRANE / KR = Company Information = ALL PRICES ARE NET FOR EXPORT (Joris Versteijnen NL-DE-GB; Wouter Greutink NL-DE-GB-ES-IT; Govorim po ryccki). We make every effort to provide accurate information, but no rights can be derived from the information provided.

Condition: used, mileage: 204,500 km, power: 478 kW (649.90 HP), first registration: 04/2018, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 8x4, wheelbase: 4,400 mm, fuel: diesel, brakes: engine braking, color: yellow, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: other, Year of construction: 2018, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, parking heater, traction control, = Additional Options and Accessories = - Remote-controlled central locking - Refrigerator - Air suspension - Hub reduction - Power take-off (PTO) - Radio - Reversing camera - Sun visor - Spotlights - Auxiliary heater - Tool box Lrjdpfxjzddwto Aiion = Notes = Copma 1150.8 JIB J6 Year 2018 Winch Hydraulic outriggers Hydraulic extensions 8 + 6 Scanreco radio remote control 4.52 m - 19,400 kg 6.10 m - 14,100 kg 7.72 m - 10,800 kg 9.47 m - 8,500 kg 11.22 m - 7,000 kg 13.82 m - 5,700 kg 15.20 m - 4,900 kg 17.15 m - 4,300 kg 19.52 m - 3,760 kg 22.50 m - 2,450 kg 23.90 m - 2,300 kg 25.50 m - 2,030 kg 27.20 m - 1,510 kg 29.00 m - 1,180 kg 30.90 m - 960 kg 32.80 m - 720 kg = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Front axle 1: Tire size: 385/55R22.5; Steered; Tire tread depth left: 40%; Tire tread depth right: 40%; Suspension: Leaf spring suspension Front axle 2: Tire size: 385/55R22.5; Steered; Tire tread depth left: 70%; Tire tread depth right: 70%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 315/70R22.5; Dual tires; Tire tread depth left inner: 80%; Tire tread depth left outer: 80%; Tire tread depth right inner: 80%; Tire tread depth right outer: 80%; Suspension: Air suspension Rear axle 2: Tire size: 315/70R22.5; Dual tires; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70%; Suspension: Air suspension Weights Unladen weight: 27,417 kg Payload: 9,583 kg GVW: 37,000 kg Functional Crane: Copma Financial Information Price: On request Identification Model number: FH16 650 8x4 / 115 tm CRANE / KR = Company Information = ALL PRICES ARE NET FOR EXPORT (Joris Versteijnen NL-DE-GB, Wouter Greutink NL-DE-GB-ES-IT). Govorim po ryccki. We strive to provide accurate information, but no rights can be derived from the information provided.

Condition: used, Year of construction: 1987, spindle bore: 105 mm, Parallel Lathe PBR type TM-30 Between points: 3000 mm Maxi Ø on bench620 mm Maxi Ø over saddle: 400 mm Maxi diameter in brocken bed: 860 mm Spindle diameter: Ø 105 mm Spindle speed: from 15 to 1500 RPM 3-jaws chuck Ø 315 mm Year of construction: 1987 Motor: 15 CV Threadings: Metric + Whitworth Tailstock CM5 Scale 2 axes Equipped with: one 3-points fixed steady Rapid Feed non-functional: 1 way Automatic travel X + Z is not functionnal Voltage: 380 V Dimensions (L x W x H): 4900 x 1500 x 1700 mm Lrjdsyyynzjpfx Aiisn Weight: 4,5 T

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, GF AgieCharmilles Classic V3 Year of manufacture 2008 Lredjv Hbygspfx Aiion Travel paths: X= 500 mm, Y= 350 mm, Z= 426 mm Travel paths U/V axis: +/- 70 mm Maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 (in bath) / 800 (without bath) kg Achieveable surface quality: Ra: 0.20 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.15 – 0.33 mm Water bath machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for comfortable Setting up AGIE IPG-V generator AGIEVISION 5 control Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine has already been cleaned, overhauled and tested by us. We would be happy to carry out an individual test cut for you. You receive a 6-month warranty on all machine parts. We would also be happy to offer you commissioning and training

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, AGIECUT Classic 2S Year of manufacture 2001 Travel paths: X= 350 mm, Y= 250 mm, Z= 256 mm Travel paths U/V axis: +/- 70 mm Maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achieveable surface quality: Ra: 0.30 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Water bath machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for convenient setup AGIE HSS-C generator AGIEVISION control Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and overhauled after we receive the order. A test cut is then carried out with the best surface for acceptance. You receive a 6-month warranty on the machine. Lsdpfx Aisv Dkvroiern We are happy to offer you commissioning and training on site.

Condition: like new (used), *3. COMMERCIAL OFFER SHEET - KARCHER B 90 R* --- *1. EQUIPMENT DESIGNATION* *Type*: Battery-powered, ride-on floor scrubber *Brand / Model*: KARCHER Professional B 90 R Bp Pack Lrsdpfx Aiszbvrdeion *Year*: Estimated 2012-2014 *Serial Number*: ..... *2. TECHNICAL SPECIFICATIONS* Item Detail Working width 90 cm, 2 disc brushes Performance 5400 m²/h Tanks Clean water 140 L / Dirty water 140 L Power supply NEW 6V batteries 06/2026 Operating time 3h30 to 4h *3. GENERAL CONDITION & READINGS* Inspection point Reading Comment Hour meter 58 h Almost new condition Batteries New 06/2026 Invoice provided Brushes / Squeegee Good condition 80% remaining wear Operational test OK Suction, traction, and scrubbing validated

Year of construction: 1995, condition: excellent (used), Dual-fuel burner Weishaupt GL40/1B – TM version Output: 450-2550 kW Year of manufacture: 1995 Oil flow rate: 45-215 kg/h With existing Dungs DN65 valves. Worldwide shipping possible. Мы говорим по-русски! Please arrange a viewing by phone beforehand. Preferably sold to dealers, businesses, or for export. All information is provided without warranty, subject to errors and prior sale. The seller assumes no liability for typing and data transmission errors. We will gladly purchase your used boiler or burner! Of course, we will also take care of all formalities. Ledshl R Twopfx Aiijrn Loading is possible.

Condition: as good as new (ex-display), UniTek Thyristor Controller Type 79 Classic Q3 400/450-15 UE 400 Lrjdpfx Aijh Dwg Ujien UA 450 ID 15A Ia 30A Control voltage 400 volts Weight 7.5 kg

Year of construction: 2020, condition: excellent (used), Emmegi Classic Magic Electronic double‑head cutting‑off machine Twin‑head saw for aluminium and PVC profiles, with NC‑controlled DC motor driving automatic mobile head movement. All angles pneumatically settable down to 22°30’ external. Lrjdpoy U Tczsfx Aiijn Key Features Blade: Ø 450 / 500 mm cemented carbide blades Cutting length: 5 m useful cut Angle range: 90° to 22°30’ external (pneumatic tilt) Positioning: Magnetic strip direct measuring system Control: Alphanumeric fluorescent display (2 × 40 chars) Memory: 99 profile corrective values (auto angle calculation) 20 cutting lists (50 rows each) via keyboard 10 cutting lists (100 rows each) via USB (PC) Connectivity: USB port, RJ45 network card; label printer ready Clamping: Horizontal/vertical pneumatic vices with low‑pressure device Safety: Pneumatic full protective hoods for cutting zones Lubrication: Water spray‑mist (oil emulsion or minimal quantity oil) Technical Specifications Motors: 2 × 2.2 kW (400 V); total 5.3 kW Blade speed: 2,800 rpm Operating pressure: 6–8 bar; air consumption 15 NL/cycle Dimensions (5 m version): 9,400 × 1,080 × 1,840 mm (L×D×H) Weight: Approx. 1,500 kg Applications High‑precision cutting of aluminium / PVC profiles for windows, doors, curtain walls, and light alloy processing.

Condition: new, Year of construction: 2025, FS 41 classic Tersa – Jointer-planer with TERSA quick-change cutterhead system With TERSA cutterhead for ultra-fast cutter blade changes TERSA cutterhead system enables particularly quiet operation Helically toothed steel infeed roller for consistent and uniform wood feed The particularly long, one-piece jointer tables allow for easy planing of workpieces Large jointer fence can remain in its position when the jointer tables are opened Rear-opening jointer tables The high machine weight ensures maximum precision and smooth operation Powerful industrial motor Robust steel/cast iron construction Lredjcnxayjpfx Aiijn Model: FS 41 Classic Tersa Item No.: 5503414 Technical data ---Technical data, jointer--- Total length of tables: 1800 mm Feed table length: 920 mm Table height: 870 mm Working width: 410 mm Max. chip removal: 4 mm ---Technical data, planer--- Dimensions of planer table: 605 x 420 mm Min./max. working height: 3 / 230 mm Feed speeds: 7 m/min Cutterhead diameter/cutter blades: 72 mm / 3 pcs. Speed: 5200 rpm Motor 400V/50Hz/S6 40%: 5.0 kW (6.6 hp) Dust extraction port diameter: 2 x 120 mm Weight: 270 kg Tersa cutterhead No more adjusting and screwing Cutter blade changes in seconds Self-locking Particularly quiet Planing unit Massive anti-kickback devices prevent workpiece kickback 3-blade Tersa cutterhead for optimal planing result Wood feed Helically toothed steel infeed rollers for a constant and uniform wood feed without marks 13 teeth engage simultaneously for powerful feed Wear-free compared to rubber infeed rollers Dust extraction hose connection The dust extraction ports of the jointer (1) and planer (2) point in the same direction The hose connection is made from only one side No hose is needed that extends around the machine

Condition: as good as new (ex-display), Year of construction: 2026, ST 3 classic F 23 – Combined Saw-Milling Machine With pivoting saw blade, pivoting milling spindle, and format sliding table made of anodized aluminum Stable steel cast iron construction Large support surface and precise cast iron table High-precision format sliding table made of anodized aluminum (travel distance 2250 mm) Large extension table (900 x 600 mm) with extendable aluminum telescope fence Max. saw blade diameter 315 mm with scoring device, pivotable from 90° to 45° Saw parallel fence with fine adjustment Stable saw unit and large, double-bearing milling unit ensure maximum stability, precision, smooth operation, and long service life Solid and precise machine table made of stress-free cast iron 3 milling speeds, manually adjustable from 3,500 - 10,000 rpm With clockwise/counterclockwise rotation of the milling spindle Standard arc milling guard Two 5.0 kW motors with high power reserves Cast iron milling unit mounted on both sides at the top precision ball bearings on top close to the pivot point four optimally graduated milling speeds, which enables the sharpening of workpieces Powerful motors Industrial motor, 100% duty cycle for continuous operation (full load) suitable Scope of delivery: Arc milling guard Anodized aluminum format sliding table Aluminum fence jaws Folding stops Technical data Dimensions of cast iron work table 1112 x 430 mm Fence length 2250 mm max. saw blade diameter with/without scoring 315 mm max. cutting height at 90°/45° 100/70 mm max. crosscut width 2660 mm Saw blade pivot 90° - 45° Cutting width 900 mm Speed 4000 rpm Table saw - Spindle pivot 90° - 45° Spindle working length 100 mm max. tool diameter 210 mm max. tenon tool diameter 275 mm max. countersinking tool diameter 180 mm Ledscnwydspfx Aiisrn Speeds 3,500/7,000/10,000 rpm General - Motor power 400 V/50 Hz/S6 40% 2 x 5.0 kW (6.6 HP) Weight 470 kg Dust extraction port diameter 2 x 120 mm Dust extraction port diameter saw blade guard 60 mm Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Compact circular saw with a pivoting saw blade and a high-quality, anodized aluminum crosscut fence. The cutting plane of the compact circular saw is directly on the roller table. Precision-guided aluminum crosscut fence, anodized as standard. Large table extension guided on a telescoping arm and adjustable in length. Lsdpecnxamjfx Aiisrn The standard table extension and table widening allow for easy work with larger workpieces. The large saw unit made of cast iron is double-mounted on the cast iron table and guarantees stability, precision, smooth running and a long service life. Large work table made of ground cast iron, making it extremely robust and durable. Smooth operation and precise cuts. Aluminum crosscut fence. Equipped with a tried-and-tested ball contact system. Dust and dirt resistant due to minimal contact point between the ball and the trapezoidal rail. 10-year HOLZKRAFT warranty on wear of the hardened guide rails. Telescopic fence. Extendable aluminum telescopic fence. Angle adjustable. With two professional folding fences. Parallel fence. Standard with fine adjustment and quick clamping. Scope of delivery: Table extension Table widening Anodized aluminum crosscut fence Parallel fence with round bar guide and fine adjustment Model: SC 2 classic Item No.: 5504215 Technical data Table dimensions: 1020 x 325 mm Table height: 900 mm Fence length: 1660 mm Cutting height max. 90° with scoring blade: 100 mm Cutting height max. 45° with scoring blade: 79 mm Cutting width max. to the left of the saw blade: 1270 mm Cutting width with parallel fence: 900 mm Saw blade tilt: 90° - 45° Saw blade diameter max. with scoring blade: 315 mm Saw blade diameter max. without scoring blade: 315 mm Scoring saw blade diameter (optional): 80 mm Main saw blade speed: 4000 min-1 Scoring saw blade speed: 7600 min-1 Electrical connection: 400 V / 50 Hz Motor power: 4.0 kW Dust extraction port diameter: 120 mm Dust extraction port diameter on the saw blade guard: 60 mm Weight: 295 kg Location: In stock at 54634 Bitburg - available immediately -

Condition: as good as new (ex-display), Year of construction: 2025, Holzkraft FS 30 Classic Tersa Planer-Jointer with Tersa cutterhead and planer knives - quick-change system The Tersa planing knife system enables knife changes in seconds and ensures particularly quiet operation. Helically toothed steel infeed roller for consistent and even wood feed. Extra-long planer tables. Large fence can remain in its position when the planer tables are opened. Planer tables open towards the rear. High machine weight. Powerful industrial motor. Robust steel and cast iron construction. Total length of the tables: 1510 mm Feed table length / table height: 740 mm / 850 mm Working width: 300 mm Max. chip removal: 4 mm Lredebuldyspfx Aiien Dimensions of thickness table: 565 * 300 mm Min./max. working height: 3/230 mm Feed speeds: 7 m/min Planer spindle diameter / planer knives: 72 mm / 3 pcs Speed: 5200 rpm Motor 400V/50Hz/S6 - 40%: 4.0 kW (5.5 hp) Dust extraction nozzle diameter: 2 * 120 mm Scope of delivery: Tersa planer cutterhead Anodized fence Available from stock in Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2026, Combination 4-in-1 machine HOLZKRAFT CU 300 Classic F 23 N -- Technical Data -- - Circular Saw - Beam length 2,250 mm Max. saw blade diameter 315 mm Max. cutting height at 90°/45° 103 / 82 mm Max. support width to the left of the saw blade 2,310 mm Cutting width with parallel guide 820 mm Saw blade tilt 90° - 45° - Jointer - Working width 300 mm Jointer table length 1,510 mm Cutterhead diameter / Number of cutter knives 72 mm / 3 pcs. - Thicknesser - Table dimensions 300 x 585 mm Min./max. working height 3 / 230 mm Lrodpfx Asci Tvhjiisn Max. material removal 4 mm Feed rate 7 m / min - Table Router - Usable spindle length 100 mm Max. tenon tool diameter 275 mm Max. tool diameter 210 mm Spindle speed 3,500 / 7,000 / 10,000 rpm Spindle diameter 30 mm - General - Motor power 400 V / 50 Hz, 3 x 5.0 kW (6.6 hp) Dust extraction port diameter 4 x 120 mm Dust extraction port diameter on saw blade guard 60 mm - Promotional Price - Location: In stock, 54634 Bitburg

Condition: like new (used), Year of construction: 2019, functionality: fully functional, cutting length (max.): 10,000 mm, feed length X-axis: 5,020 mm, saw blade diameter: 500 mm, total length: 7,100 mm, type of input current: three-phase, saw blade speed: 2,800 rpm, input voltage: 380 V, air pressure: 6 bar, overall weight: 1,600 kg, Classic Magic, extremely little use – like new Protective film still in place in many areas -Double miter saw with program/positioning control -Electrically adjustable saw head, V = 20 m/min Lrsdozav A Tjpfx Aiisn -Saw blade diameter 500 mm -Saw blade bore 32 mm -Max. cutting length 4,200 mm; automatic cutting up to 10,000 mm possible in oversized cutting mode -Min. cutting length at 90° = 225 mm -Horizontal pivoting of the cutting heads -Miter range from 90° to 22.5° (outward) -Saw heads with automatically controlled full-protection guards -Profile support roller conveyor (right) -Pneumatic material/workpiece clamping The machine comes with the following accessories: -Cleverbridge for data transfer via USB or RJ45 -Label printer for marking profiles -Long roller conveyor -Additional tensioner on the roller conveyor -Horizontal + vertical tensioners -Macro function (ideal for mosquito screen manufacturers) -Oversized cutting -Shortcut -Crosscut -Automatic cutting -Automatically extending profile support

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, cutting length (max.): 100,000 mm, feed length X-axis: 4,000 mm, saw blade diameter: 500 mm, total length: 5,500 mm, type of input current: three-phase, saw blade speed: 2,800 rpm, input voltage: 380 V, overall weight: 1,400 kg, -Double-mitre saw with program-/positioning control -Electrically adjustable saw head, speed V = 20 m/min. -Saw blade diameter 500 mm -Saw blade bore 32 mm -Max. cutting length 4,200 mm; automatic cutting up to 10,000 mm possible in overlength mode -Min. cutting length at 90° = 225 mm -Horizontal swiveling of the saw heads -Mitre angle range from 90° – 22.5° (outward) -Saw heads with automatically controlled full guard -Profile support roller conveyor (right) -Pneumatic material/workpiece clamping Machine includes the following accessories: -Cleverbridge for data transfer via USB or RJ45 -Profile height measurement -Long roller conveyor -Horizontal + Vertical clamps Ledpfx Ajzav Atjiiorn -Macro function (ideal for mosquito screen manufacturers) -Overlength cut -Shortcut -Crosscut -Automatic cut

Condition: used, Year of construction: 1998, Empty weight: 21.000 kg Price: On request - Year: 1998 - Documentation available: Yes Lsdpfx Aex E Ukusiiern - CE marking present: Yes - CE certificate present: No - Serial number: 430290898 - Drive system: CNC - Power [kW]: 60.0 - X-axis travel [mm]: 1500 - Y-axis travel [mm]: 900 - Z-axis travel [mm]: 550 - Table width [mm]: 2000 - Table depth [mm]: 900 - Magnet width [mm]: 1500 - Magnet depth [mm]: 800 - Max. spindle speed [rpm]: 3000 - Options: Filter system - Control type: Unicon - Motor power: 60.0kW - Transport weight [kg]: 21000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, offer consists of: New roller - for Stahlfolder/Heidelberg folders working width 56cm - 330€ / pc. working width 66cm - 365€ / pc. working width 78cm - 400€ / pc. Lrjdpfxsxr Adte Aiien ball-bearing for rollers: working width 40-94 cm - 28€ / pc. We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs