Used Tang Og Weiss As Line For Packaging Liquid Products Into Plastic Bottles With Dose Up To 750 Ml for sale (65,115)

Condition: ready for operation (used), Used can manufacturing line for the production of 73 mm or 99 mm cans. Several compositions of machines are available. Consisting of: Fsdpfxjvy Tyxs Albogg - Krupp Sdvt duplex slitter - Soudronic FBB400 welding machine - Soudronic inside powder coating system - Outside lacquering system - Frei curing oven - Metalbox 65d spin flanger - FMI A304 beader - FMC 652 seamer

Condition: used, Year of construction: 2017, machine/vehicle number: LC560, Used Processing Line for small dairy products 2000 L/h Fjdpfjw Ahg Rex Albsgg Milk Reception and Initial Storage The Used Processing Line for Small Dairy Products 2000 L/h begins with a milk reception unit consisting of two Lactofreeze tanks and a receiving pump. Initially, operators channel raw milk into the tanks, where it remains chilled. As a result, the system ensures thermal stability before processing. Furthermore, this setup minimizes the bacterial load while allowing continuous transfer to the pasteurization stage. Pasteurization and Separation Next, the pasteurization phase uses a plate heat exchanger with a retention section and auxiliary systems, all rated for 2,000 liters per hour. Specifically, the pasteurizer rapidly heats and holds milk at a predefined temperature to eliminate pathogens. Then, the GEA WESTFALIA separator—rated at 3,000 L/h—performs cream separation. Simultaneously, the RANNIE homogenizer (1,000 L/h) reduces fat globules, thus enhancing emulsion stability and preventing cream rise. Fermentation and Coagulation Following thermal treatment, the milk proceeds to fermentation. Here, operators use an insulated double-wall fermentation tank with a 1,000-liter capacity and planetary agitator. Consequently, they maintain uniform bacterial activity and precise temperature control. In parallel, a 1,000-liter coagulation vat equipped with a planetary mixer initiates the curdling process. Both tanks ensure optimal protein structuring for yogurt, cheese, and cultured cream products. Cheese Processing and Draining After coagulation, the Used Processing Line for Small Dairy Products 2000 L/h continues with cheese processing. The system includes a 500-liter vat with a draining sieve and two cheese draining tables. Therefore, operators can efficiently handle large curd volumes. Moreover, these components simplify whey separation while ensuring sanitary compliance. Additionally, their design supports easy cleaning and cross-contamination prevention. Packaging Operations Once products are ready for packing, the line integrates semi-automatic and automatic solutions. First, a semi-automatic filler doses pasteurized milk into 1-liter bags. Subsequently, the yogurt cup filler automatically fills and seals 75 mm and 95 mm cups at up to 1,800 units per hour. Meanwhile, the rotary labeling machine by ETICAP (2004) applies both front and rear self-adhesive labels on cylindrical cups. Importantly, the machine ensures consistent alignment and adhesion. Date Coding, Thermal Control, and Final Packing In addition, a Videojet 1220 coder (2019) applies expiry dates onto each product via belt conveyor. Further downstream, a vacuum packaging machine handles cream and cheese portions. Thermal utilities include a 115–150 kW solid fuel boiler (2014) with dual transfer pumps. At the same time, an ice water tank (5,000 L, 2014) and a cooling unit (2018) maintain temperature consistency across the line. Laboratory and Accessories Alongside processing units, the Used Processing Line for Small Dairy Products 2000 L/h features a dedicated laboratory. Specifically, it houses analytical tools for quality control and milk analysis. Additionally, the line includes 300 plastic crates for storing and transporting yogurt cups. System Shutdown and Storage Finally, operators shut down the line in September 2023. Before dismantling, they cleaned ...

Condition: used, Used filling line for water for PET containers 5L 800bph This used filling line for water for PET containers 5L 800bph provides a complete solution for processing 5-liter PET bottles, both round and square. Specijalka from Serbia manufactured the line in 2006. Although the owner disconnected it eight years ago, they confirm that it remains in proper condition. Furthermore, you can inspect the line in dry cycle mode. Technical specifications of the filling line The used filling line for water for PET containers 5L 800bph reaches a nominal output of 800 bottles per hour with 5.0-liter containers. Specifically, the system includes a 10-valve rinser, an 8-valve filler, and a 4-head capper, all integrated in a monoblock. Additionally, a cold-glue labeler applies paper labels. As a result, the setup handles rinsing, filling, capping, and labeling in a compact layout. PET bottle production unit In addition to the filling line, this offer includes a semi-automatic PET bottle blower built in 2004. The machine uses two-cavity molds and can produce 800 bottles per hour at 0.5 liters, 600 bottles per hour at 1.5 liters, and 400 bottles per hour at 5 liters. Notably, the system uses water cooling to maintain operational price includes molds for 0.5-liter round bottles and 5-liter square bottles. Consequently, this unit complements the filling line perfectly and allows in-house preform blowing. High-performance compressor for blowing To support the above components, a BOGE compressor from Germany (2006) is also available. It delivers 11 kilowatts of power, 35 bar of pressure, and a flow rate of 1290 liters per minute. Moreover, the system includes a 1000-liter air tank rated for 40 bar. The unit has only logged 500 operating hours. Thus, it remains in excellent mechanical condition. Importantly, this component ensures adequate air supply for blowing PET bottles reliably and efficiently. Technical conclusion Fgodowr T E Dopfx Albeg In summary, this used filling line for water for PET containers 5L 800bph enables small to medium-sized producers to manage the complete bottling process autonomously. Specifically, the line handles rinsing, filling, capping, and labeling. Meanwhile, the included blower and compressor provide the necessary infrastructure to blow bottles from preforms. Therefore, producers can oversee every phase of water bottling from bottle production to final packaging.  

Condition: excellent (used), Year of construction: 2021, Bag in Box automatic line for industrial liquid packaging (2021). Low usage. Designed for standard VITOP® DN15 Bag in Box fitments. Suitable for volumes from 3 to 20 litres. Complete line comprising ECOPACK MASTERFORM automatic case former for B1–B1 cartons with central sealing, minimum/maximum carton dimensions 100 × 220 / 115 × 225 mm and minimum/maximum carton height 210 / 400 mm; ECOFILL MASTER automatic filling machine with production capacities of approximately 780 bags/hour at 2.25 litres, 600 bags/hour at 5 litres and 290 bags/hour at 20 litres; 100-litre pressurised buffer tank; ECOPACK HOTMELT hot-melt case sealer; and automatic cartesian palletiser for 3 to 10 litre Bag in Box cartons, configured for continuous, accurate and reliable production. Fodpfx Aljyid Dbobogg

Year of construction: 2015, condition: ready for operation (used), functionality: fully functional, MOBILE FRUIT PROCESSING & DRYING PRODUCTION LINE – RARELY USED, COMPLETE SET Are you looking to expand your fruit processing operations with a complete and mobile solution? We are offering a rarely used, high-quality fruit processing and drying production line, including a fully adapted container. The entire system is mobile, allowing quick installation and easy relocation according to your needs. This package provides everything you need for efficient fruit juice and dried fruit production – from washing and pressing to pasteurizing, filling, and drying. 🔹 Key Highlights: Mobility: All components, including container-based drying line, can be relocated easily. Condition: Rarely used, meticulously maintained, ready for immediate operation. Pricing: Complete fruit processing line: €40,000 Fruit drying line with mobile container: €20,000 🍏 Fruit Processing Line Specifications: 1)Pallet Tilter WB400 For pallets: 1200x1000x800 mm Fjdpfx Aew N Ri Helbegg Load capacity: 400 kg Stainless steel, simple operation 2)Fruit Crusher with Washer & Conveyor MD2000 Hopper capacity: 100 kg Processing capacity: 2000 kg/hour (continuous) Adjustable crushing fineness Stainless steel construction 3)Belt Press for Fruit PL500 Capacity: up to 800 kg/hour (continuous) Continuous juice extraction, modern method Stainless steel 4)Transfer Tank FN800 Capacity: 800 l/hour Fully automatic pumping to storage tanks Stainless steel 5)Outfeed Belt Conveyor VND3 Dimensions: 3050 × 500 mm Mobile, adjustable Stainless steel 6)Flow Pasteurizer PP250 Capacity: 250 l/hour Automatic temperature & flow control Easy to clean Stainless steel 7)Bag-in-Box Filler BB600 Semi-automatic operation Capacity: up to 600 units/hour Stainless steel 🍎 Fruit Drying Line with Container -Professional Dehydrators with stainless steel trays -High drying capacity suitable for various fruits -Integrated Container: Insulated, ventilated, and equipped for mobile operation -Ready-to-use drying line, plug & play -Price: €20,000 📩 Contact us today via Email or WhatsApp to schedule a viewing or request more details!

Condition: used, Used bottling line Cortellazzi for CSD in PET bottles – 8000 bph General overview of the line The used Cortellazzi bottling line for carbonated soft drinks in PET bottles 8000 bph delivers an integrated solution for producing soft drinks and sparkling water in 0.50 L and 1.5 L containers. Specifically designed for industrial environments, the system provides a complete technical configuration. It maximizes production efficiency and ensures operational safety by including protection devices and quality control systems at every stage. Moreover, the layout supports continuous operation with minimal downtime. Filling unit and blow molders The Cortellazzi Fintec VEGA 40.70.10 isobaric filling monoblock 1998 handles carbonated products while maintaining constant pressure during the filling process. As a result, the system preserves CO2 content and prevents product loss. Two separate blow molding machines feed the containers. A Sidel SBO8 from 1999 ensures continuous high efficiency production, while a Kosme KSB-4000 from 1998 serves as a backup or support unit. In addition, both machines allow quick format changes and stable operation under load. Carbonator and CO2 management The Cortellazzi Kristal Mix 1998 controls carbonation and saturates the product with CO2. Consequently, the unit ensures consistency and stability throughout the filling phase. Notably, it also supports fine tuning of pressure and temperature parameters. Labeling and customization Three labeling systems carry out specific functions. The Kosme Ekstrahotmelt 12TS1E1 1998 applies labels using hot melt glue. Meanwhile, the KHS Carmichael 1995 handles traditional label application. Furthermore, the Esleeve ESM 3200M 2004 applies shrink sleeves to PET containers in various formats. Together, these machines offer flexible labeling solutions for different product lines. Quality control and heat tunnel The Krones Miho module 2008 inspects containers and labels, detecting any defects or irregularities. If necessary, the system can reject non compliant items without interrupting the production flow. Then, the Krones Shrinkmatt 3000 tunnel 2008 uses steam to shrink the sleeves uniformly onto the containers. In particular, this tunnel guarantees even heat distribution, preventing sleeve distortion. Secondary packaging The Dimac Bluestar F30 2007 wraps products into shrink film with speed and precision. As such, this unit optimizes grouping and prepares the packs for palletizing. Additionally, it minimizes material waste and ensures a clean wrap. Handle and cap application The Twin Pack MGE 1997 applies handles to the grouped bottles. Simultaneously, the Bortolin Kemo 1997 feeds caps consistently and ensures uninterrupted sealing of containers. This way, the two systems maintain rhythm and alignment on the line. Fsdpfxewukuzo Albsgg End of line and automation The Keber Meg Arm palletizer 1998 arranges the finished packs onto pallets.

Condition: used, operating hours: 1,800 h, Used Bottling Line for champagne, sparkling and still wine 4000 bph Product Compatibility and Filling Technology This bottling line processes still wine, sparkling wine, and champagne with high efficiency. Specifically, it handles only glass bottles and uses an isobaric filling system, which ensures precise control when filling pressurized liquids, such as sparkling products. As a result, wineries that produce multiple wine types with different physical and chemical properties can rely on this line for consistent, adaptable operation. In other words, the system addresses diverse product demands without compromising output quality. Performance Output by Bottle Format Depending on the bottle format, the line delivers different outputs. It processes both 0.20l and 0,375l bottles at 4,500 bottles per hour. Meanwhile, it handles 0,75l bottles at 4,000 bottles per hour and 1.5l bottles at 2,000 bottles per hour. Therefore, this production speed suits medium-scale wineries that require flexibility while maintaining industrial performance. Commissioning, Runtime, and Immediate Availability Technicians installed the line in 2022. Since that time, it has operated for 1,800 hours and produced approximately 2,400,000 bottles. The system continues to run in production, which means it remains in good operational condition. Furthermore, its immediate availability offers an advantage to wineries needing rapid deployment. Because of this, buyers can integrate the equipment without significant downtime. Primary Bottling Block: Depalletizing, Rinsing, Filling, and Capping The process starts with a Duetti Packaging depalletizer, model M, which automatically feeds empty bottles into the system. Subsequently, the GAI monoblock, model 4033RES-HP-A01, performs rinsing, filling, and capping in a single integrated unit. The dual-stage rinser (water + gas) uses 16 grippers to sanitize bottles. A high-pressure electropneumatic filler with 24 valves carries out isobaric filling. Notably, the 3-head rotary corker applies straight corks, champagne-style mushroom corks, plastic closures, and aluminum screw caps. Moreover, the monoblock includes multi-format screws, motorized guide adjustments, dummy bottles for internal rinser sterilization, and a solenoid valve kit to switch between gas and cleaning liquid inputs. Altogether, this configuration provides high precision, minimal changeover time, and excellent bottle handling. CIP and Quality Control: Cleaning and Inspection Systems Fgodpfxswgw Dge Albjg To maintain hygiene, the WIN&TECH CIP unit, model Win&Guard C 23.05, manages automatic cleaning via a steam-water heat exchanger and a three-stage filtration system across two independent circuits. Additionally, this system allows operators to sanitize the internal components between production runs without disassembly. At the same time, the CMP inspection unit, model CV-MUF108, performs continuous quality control.

Condition: ready for operation (used), COMPLETE KRONES PET BOTTLES ASEPTIC FILLING LINE FOR FRUIT JUICE/BEVERAGES AND SPRITZERS. SUITABLE FOR STILL AND CARBONATED PRODUCTS. YOM 2002-2007 CAPACITY: 0,5L x 36.000 BPH 1,0L x 30.240 BPH 1,5L x 25.200 BPH BOTTLE CLOSURES 28mm. THE LINE INCLUDES BOTTLE BLOWING, FILLING, LABELING, PACKAGING AND PALLETIZING: 1. Control unit: Ruland 2002, touchscreen, flash heating & CIP/SIP 2. Pasteur: Ruland 2002, tube heat exchanger, 1315 L supply tank, max. 21,800 L/h 3. Sterile tank: Roth 2002, 11,000 L 4. Carbonization: Roth/Ruland 2002, 2575 L, disconnected 5. Nitrogen system: Terboven/ISTE 2002 Fgedpfexm Rwqox Albeg 6. Hygienic center: Ecolab/Lang 2002, CAF, no PLC 7. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 8. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 9. CIP/SIP: Ruland 2002, 20,000 L/h, 1315 L supply tank 10. Cleanroom: Weiss 2002, ventilation/overpressure 11. Preform hopper: Dieterle 2002, MD3 12. Preform feeding: Tanner 2002, HFT 4730 / RGT 1624 13. Blow molding: Krones Contiform S16 2002, 16 stations, 1.0–20,000 b/h 14. Air conveyor: Krones 2002, automatic rail adjustment 15. Cap conveyor: Gassner 2002, 2 container positions, cap elevator 16–18. Filling machine: Krones CAF VODM 100 2002, injector (60), rinser (80), filler (100), capper (20), 1,0–20.000 b/h, 28 mm caps, still/carbonated 19. Label check: Krones 2002, incl. in Prontomodul 20. Bottle check: Krones 2002 21. Conveyor: Krones 2002, air blower before labeling 22. Labeling machine: Krones Prontomodul 2007, max. 35.600 b/h 23. Canmatic module: Krones 2007, paper labels 24. Contriroll module: Krones 2007, film roll 25. MHD coding: Videojet Excel/170i 26. Shrink wrapper: Krones Variopak 2002, 0.5–36,000 b/h, carton feeder & film transport 27. Packaging conveyor: Krones 2002 28. Handle applicator: Twinpack MHTE 2002 29. Empty pallet magazine: Krones LPM 2002 30. Palletizing: Krones robot 3A loader 2002, 4,000 packages/h 31. Pallet conveyor: Krones 2002, transfer cart & turner 32. Empty pallet magazine: Krones LPM 2002 33/34. Pallet stretch wrappers: Franpak 2002, top sheet applicator 35. Tying machine: Bornbinder HB 2002 36. Pallet coding: Logopak EAN 128 2003 THE LINE IS STILL NOT DISMANTLING, EXCELLENT CONDITION. LOCATION - GERMANY.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, complete plat concisting of: Bi-rail overhanging conveyor with two points bar support , lift and rotation unit Fgodoxw Ux Hjpfx Albeg Spray booth for robot with full recirculation, with autimatic pre-filter replacment system High pressure humidificer for spray booth and flash off room Robotic spray system for windows with jacket nozzle cleaning unit automatic color change (3 independent ) electrostatic safty system paint flow meter drying tunnel with ldp system and axial fans supervisor systeem with data interface and datamic reader “The line is packed for transport. It has been previously installed, but it has never been taken into operation.”

Condition: used, Complete Refrigerator Production Line – CANNON & NORTOOL (Sheet Metal, PU Foaming, Assembly, Charging & Packaging), used machine Fully integrated, high-capacity production line capable of manufacturing complete domestic and commercial refrigerators/freezers from raw sheet metal to final packaged products. Key Stations of the Production Line: - Sheet Metal Processing Station - Thermoforming (Vacuum Forming) Unit: CANNON FORMA vacuum forming machine (for ABS/HIPS inner liners and door liners). - Polyurethane (PU) Foaming Line: NORTOOL Oy cabinet and door foaming fixtures with high-pressure PU injection system. - Main Assembly Conveyor Line: Integrated assembly line for components, doors, and cooling circuits. - Evacuation & Gas Charging Station: High-vacuum pumping station and automatic refrigerant gas charging equipment. Fgjdpfezzkd Tex Albog - End-of-Line Testing & Packaging: Electrical safety testing, leak detection, and automated packaging unit. Technical Details & Condition: Manufacturers: CANNON Group, NORTOOL Oy, and integrated custom machinery manufacturers. Condition: Used Inspection: Available upon prior arrangement

Condition: used, Used filling line for edible oil up to 1800 bph Introduction The filling line for edible oil up to 1800 bph represents an advanced technological solution in the bottling sector. This system, branded Almanah Alman, guarantees efficiency and reliability essential for modern production needs. Capacity and Dimensions Equipped with a production capacity of 1800 bottles per hour for 1 liter PET containers, this line stands out for its high productivity. The overall length of the line is 6.3 meters, an important detail for planning the installation space in its warehouse. Filler Specifications in the Filling Line Used for Edible Oil The heart of Filling Line is the 18-valve filler, which operates through a pressure filling system. This method ensures rapid and efficient distribution of the product in the filling line for edible oil. Which ensures the maintaining, integrity and quality of the edible oil. Capper and labeller The capper is equipped with 6 heads and fits plastic pressure caps, ensuring safe and precise closure of bottles. The label maker, on the other hand, applies a paper label using liquid glue, allowing a clean and professional finish to the product in the used filling line for oil. Fgsdpfx Ajvguagelbeg Installed power needed by the filling Line Used for Edible Oil The line requires an installed power of 3 kW, an aspect to be considered for energy optimization and sustainability of the production process. This feature underlines the energy efficiency of the filling line used for edible oil in the industrial context. Conclusion The filling line used for edible oil up to 1800 bph Almanah Alman represents an ideal technological solution for those seeking efficiency and reliability in the bottling sector. With its high production capacity and advanced technical specifications, this machine is able to meet the most demanding needs of edible oil producers.

Condition: good (used), functionality: fully functional, Paper production line consisting of stock preparation, paper machine, inline coaters, calander, reeler, offline calander, slitter winders and reel packer. Fully upgraded by Valmet in 2019, including formmaster, topformer, shoepress, pre-dryer section, inline coating, multinip calender and reeler. Characteristics: Fodovptbujpfx Albegg Capacity: max ~ 350000 T/pa Width: 7500 mm Grammage: 35 – 170 gr/m2 Speed: max 1400 m/min

Condition: ready for operation (used), Year of construction: 1999, Complete bottling and jerrycan packaging line up to 10 liters, consisting of: 4-nozzle volumetric filler (last used for filling containers from 1 to 5 liters) Semi-automatic pneumatic capper DIDAC MENDEZ labeller with 2 heads and a maximum label height of 160mm Brand: J. ESQUERDA Model: LL-H/10.000/BS Year: 1999 Fedjy Ewnpspfx Albjgg

Condition: used, Year of construction: 2009, machine/vehicle number: LC606, Used Krones bottling line for beer in glass 60.000 BPHTechnical Specifications & Performance DataThis used bottling line is engineered for high-speed beer production in glass containers and is suitable for second hand industrial packaging applications. The line integrates washing, inspection, filling, capping, pasteurization, case packing, palletizing, and conveyor handling for efficient beverage production.Production speed: 60,000 bottles per hourContainer type: Amber glass beer bottlesBottle format: 0.45 L (nominal); brimful 0.464 L ± 4 mlFilling height: 45 mm from the top edgeMain filler/capper: Krones MECAFILLEmpty bottle inspection: Toptronic 19 (EBI)Pre-/post-fill inspection: Krones Checkmat; full bottle inspection and level/cap controlBottle washer: Krones LavatecTunnel pasteurizer: SHIELDCase packer: SmartPac Einpacker for crate insertionPalletizer: Krones Pressant SoperConveyor system: Krones Synco SElectrical supply: 400/230 V, 50 HzRepresentative loads (components): up to 182 A (control unit), 41 A (pasteurizer), 23 A (palletizer), 8 A (wet-end inspection equipment)Year of construction (key components): 2009Advanced Automation & Control SystemsThe line combines synchronized conveyor controls with integrated inspection systems to maintain consistent product quality at high throughput. Centralized operator interfaces provide clear status feedback for the filler/capper, inspection modules, pasteurizer, and end-of-line equipment. Electrical architecture follows standard industrial beverage production practices for reliability and maintainability.Main power: 400/230 V, 50 HzIntegrated inspection: Empty bottle inspector, pre-fill and post-fill Checkmat controlsAutomated bottle handling and crate insertion to sustain continuous operationDesigned for rapid fault detection and line recovery through modular stationsProduction Line Integration CapabilitiesConfigured as an inline system, this used bottling line is designed for seamless transfer between wet end processing, filling and capping, thermal treatment, and dry end packaging. The Krones Synco S conveyor network ensures stable bottle flow and accumulation management.Inline operation with coordinated starwheels and conveyorsGlass bottle handling optimized for beer applicationsDownstream compatibility with crate packing and palletizingFocused on 0.45 L glass format for high-speed runsMachine Condition & Maintenance HistoryThe line is presented as a second hand solution in ready-for-operation condition. Key components are from 2009, reflecting modern engineering suitable for high-speed beer bottling. Operational details, service records, and maintenance logs can be aligned with on-site inspections and testing duri... Fsdpfx Aljyr Huqebegg

Condition: used, Used Bottling Line KRONES for still, sparkling water and CSD 12000 bph The Used Bottling Line KRONES for still, sparkling water and CSD 12000 bph ensures good-performance bottling for mineral water, sparkling water, and carbonated soft drinks (CSD). Specifically, it processes PET containers in 1.5 l format, using isobaric filling technology to preserve the quality of both carbonated and non-carbonated beverages. Moreover, the bottle neck standard is PCO 1810. In addition, this Used Bottling Line KRONES for still, sparkling water and CSD – 12000 bph integrates synchronized machines, thereby optimizing every production step, from preform feeding to final packaging and palletizing. Preform Feeding and Preparation in this Used Bottling Line KRONES The process begins with the preform feeder, which continuously supplies preforms to the preform inverter. As a result, the line maintains a smooth and consistent flow, with correct alignment of preforms before the blowing process. Blow Molding Machine Next, the blow molding machine—a Krones Contiform Compact 10, year 2001—uses a Siemens S5 control system to manage heating and blowing phases. Consequently, it transforms preforms into precisely shaped PET bottles ready for downstream processes. Air Conveyors of the Used Bottling Line KRONES for still and sparkling water Once the bottles are formed, they are transferred via Krones AirCo air conveyors, model AirCo, year 2011. These conveyors extend for approximately 110 meters. Furthermore, they are controlled by inverters and a Siemens S5 controller, ensuring the transport to the next station. Mixing and Carbonation Unit Before filling, the product passes through the mixing and carbonation unit, a Krones MS, year 1992. This system mixes water and syrup, and then carbonates the product with CO₂ for sparkling drinks, or injects nitrogen for still water. Notably, the unit ensures continuous operation and mixing, thus maintaining product consistency throughout production. Fjdjwa Tqcspfx Albsgg Filling Monoblock Following the mixer, the filling monoblock—Krones VK PET 100 SV K, year 1993—comes into action. Controlled by a Schleicher system, it includes: Bottle rinsing unit Isobaric filling machine, suitable for both still and carbonated beverages Capping unit for PCO 1810 PET bottles CIP (Cleaning-In-Place) connections Capacity to handle 1.5 l format Importantly, this unit represents the heart of the line, performing several critical functions within a compact and coordinated block. Labeling Machine Immediately after filling, a Krones labeling machine, model Canmatic, year 1997, applies labels to PET bottles with precision. As such, it ensures accurate positioning and high throughput, contributing to a professional final presentation. Shrink Wrapper Subsequently, the shrink wrapper—Dimac Green Star Big, year 2011—forms multipacks using shrink film.

Condition: used, Year of construction: 2002, Overview This PET filling line was manufactured in 2002 by Krones (Germany). The line is designed for carbonated beverages such as beer or lemonades, and also suitable for water with or without CO₂. With an output capacity of up to 12,000 bph (0.5 L), it offers a complete solution from bottle blowing to palletizing. The line is being sold due to modernization of the PET division and replacement with a higher-capacity system. Equipment is in good condition and still fully operational. Technical data  Fedpjxhf Hisfx Albsgg - Line capacity: - 12,000 bph at 0.5 L - 9,000 bph at 1.0 L - 8,000 bph at 1.5 L - 6,000 bph at 2.0 L - Formats: 0.5 L, 1.0 L, 1.5 L, 2.0 L - Neck finish: PCO 1810 - Max. bottle diameter: 106 mm - Products: Beer (+4 °C), Kvass and lemonades (+10 °C), still and carbonated water - Labelling: Wrap-around, pre-cut paper labels, hot-melt - Secondary packaging: Film only (4×3 and 3×2) - PLC: Siemens S7-300 - Power supply: 400 V, 3PH, 50 Hz, TN-S Scope of Delivery - Blowing machine | Krones | Contiform S8 | 2002 | Incl. preform feeding, chiller, box titling unit - Rinser | Krones | Variojet | 2002 | Rotary - Filler | Krones | Mecafill | 2002 | Rotary, isobaric filler for CSD and beer - Labeller | Krones | SV 360-10-113 | 2002 | Rotary - Labeller | Krones | Canmatic 600-10 | 2002 | Rotary, hot-melt - Packer | Krones | Variopac FS-45 | 2002 | Film packer, 4×3 / 3×2 formats - Palletizer | Krones | Pressant Compact 1N | 2002 - Stretch wrapper | Robopac | Rotoplat | 2002 - Air conveyor | Krones | Airco S | 2002 | For blown PET bottles - Bottle conveyor | Krones | Synco S | 2002 | For filled and labelled bottles - Pack conveyor | Krones | Multico S | 2002 | For product packs - Pallet conveyor | Krones | — | 2002 | For pallet transport - Peripheral equipment | Krones | — | 2002 | Cap feeding system, hopper, valve manifold

Condition: used, 01. Product to be filled “CSD” 02. Type of Bottle RoundBottles 03. M.O.C. of the Bottle PET Bottles 04. Fill Volume / Bottle sizes 500ml 05. Type of Caps Screw Caps 06. Type of Labels BOPP 07. Output required 416 Bottles Per Minute on 500 ml     BLOWER SIPA 16 CAVITIES 2007 WITH MAINTENNACE OPERATION: Used blow molding machine for PET bottles with production capacity up to 25,000 bph with the 500ml format. Year of construction, 2007. Fgedovgt Upjpfx Albeg Used blower complete with Octagon tipper, Air recovery system, preform hopper. This machine is immediately available for sale and in case of request we can carry out pre-production maintenance. Detached from production in fully functional status is excellent opportunity for used equipment. We will build new neck personalization for pco 1881 We will build two new set of blow mould as per your request. Air conveyor system NEW/used revised 2024   NEW RINSER /FILLER/SCREW CAPPER, SPORT CAPPER: Auto Rotary 70 Head Rinser Cum 70 Head Counter Pressure Filling Cum 15 Head Rotary Screw Cap Sealing Machine,AND 15 HEAD SPORT CUP system Model Uinibloc : 70x70x15x15, fitted with Disc cap feeder, chute&shoe, SS safety hood, PLC/HMI of Schneider make, Electronic BPM meter & Counter, sensor at in feed & out feed. Fitted with one set of change parts of 250ml PET bottle. All Product Contact Parts like Tank, Valves & all product contact parts will be SS316Grade. Output – 416BPM on 500 ml bottle. Fully Automatic Bulk Cap Elevator Additional Set of Change Parts If Required RINSING SECTION : TOP OF THE ROTARY RINSSER S. SLAT CHAIN CONVEYOR Body fabricated out of pre-polished S.S. Sheets, of 8’ length for carrying empty bottles to water rinsingnozzles and rinsed bottles to the Filling Machine. BOTTLE GRIPPING HEADS The gripping heads hold the bottles by neck. The bottle carrying grippers are supported by carousel thatby turning makes the grip lever arms slide on a fixed helical guide. In this way the bottles areturned upside down to have the openings atthe bottom to coincide with spray nozzle. AIR CLEANING PROCESS The bottles when rotated are brought into theline with the fixed nozzle in such a way thatits opening partially contains the nozzle. Airjet cleaning air sprayed inside the bottle forpresettime. VACUUM PROCESS The bottles when rotated are brought into the ine with the fixed nozzle in such a way that its openingpartially contains the nozzle.

Condition: used, Used end of line TMG up to 1200 box-hour Fedpfx Asvgt N Tolbsgg Case Erector with Hot Glue Sealing Firstly, the TMG case erector features hot glue bottom sealing. It includes, notably, a Nordson glue heater. This allows for the formation and sealing of various carton sizes. Additionally, the machine has a painted iron frame. It also comes with safety protections. Importantly, it is capable of producing about 1200 cartons per hour. This equipment complies with CE standards as of 2018 and is provided with a manual. Consequently, this offers an efficient packaging solution. Case Packer with Mechanical Movement Moreover, the TMG case packer has a mechanical movement on axes. It’s designed for precision and adaptability. It can have, for example, two bottle grab heads (6+6) or one with 12 heads. This setup accommodates different bottle diameters. Furthermore, the entry bench is made from stainless steel, indicating a robust machine. With a rate of about 480 cycles per hour and equipped with safety protections, it adheres to 2018’s CE regulations. Case Sealer for Efficient Sealing of the End of line TMG Furthermore, the TMG case sealer ensures accurate top sealing with hot glue. It includes an automatic carton separator. A pneumatic piston operates the rear flap closure. It allows for manual adjustments for various carton sizes. Equally important, it achieves a rate of 1200 cartons per hour. This machine emphasizes sealing efficiency and reliability. With lateral safety protections, it meets the 2018 CE standards and is also provided with a manual, presenting an optimal solution for end-of-line operations. Conclusion of the End of line TMG Lastly, choosing “Used end of line TMG up to 1200 box-hour” machinery is strategic for enhancing packaging efficiency. Furthermore, the integration of a case erector, packer, and sealer meets not only safety standards but also offers operational flexibility. These machines are ideal for enterprises aiming to boost productivity and uphold high-quality benchmarks. In summary, TMG’s technology features comprehensive safety and operational efficiency, effectively addressing the demands of the bottling industry and ensuring top performance and reliability over the long term.

Condition: used, Processing and Filling Line for Dairy Products up to 20,000 L/Day This processing line efficiently manages volumes between 15,000 and 20,000 liters of milk per day. Consequently, it ensures high efficiency and the highest quality of finished products. Its capacity thus enables a high daily production return, which is crucial for large-scale operations. Packaging Capabilities Moreover, the line’s specialized packaging system adeptly handles various types of dairy products. For example, workers pack milk in 1.0-liter PVC bags at a rate of 2,400 pieces per hour. Additionally, they package yogurt and kefir in 410-gram and 180-gram containers at a capacity of 3,000 pieces per hour, as well as in 0.5-liter and 1.0-liter PET bottles at a rate of 1,000 pieces per hour. Furthermore, workers package sour cream in both 1,000-gram containers and bowls, each at a capacity of 3,000 pieces per hour. Similarly, they pack cheese in 5.0 kg and 10.0 kg containers for fresh cheese, and in vacuum foil from 500 and 1,000 grams for sliced cheese. Equipment Specifications Manufacturers in Italy, Slovenia, and Serbia constructed the equipment between 1999 and 2016, showcasing the quality and durability of the machines. Specifically, the milk reception unit features digital counters and foam removal systems updated in 2014. It includes horizontal and vertical tanks with capacities up to 3,200 liters, ideal for storage and cooling. Fgedsvgvrwepfx Albsg Fermentation Units and Filling Lines Insulated duplicators with double walls and planetary mixers support the line’s fermentation functionalities, which are essential for maintaining product uniformity during fermentation. Likewise, automated filling lines distribute sour cream, yogurt, and milk in various packaging formats efficiently, thereby maximizing productivity and reducing downtime. Equipment Complements and Maintenance Additionally, the line includes accessories such as a triblender for powdered milk, vacuum packaging machines for cheese, and cooling systems for warehouses. These components are crucial for extending preservation and ensuring food safety. The team has regularly serviced and maintained the equipment until production ceased in 2020, thereby demonstrating a consistent commitment to maintenance and operational efficiency. In conclusion, these details highlight the line’s capability to produce high volumes and its configuration to ensure versatility and reliability over time, which are key for those operating in the large-scale dairy sector. List of line components: Milk receiving unit Digital counter with foam remover (2014) Horizontal tank (lactofreeze) capacity 3.200 l cooling on freon – 3 pcs Vertical tank capacity 3.000 l – 2 pcs Unit for pasteurization Pasteurizer (flow) with retainers  capacity 2.000 l Separator (self-cleaning), capacity 2.000 l Homogenizer capacity 2.

Condition: used, Year of construction: 1996, operating hours: 26,000 h, machine/vehicle number: LC673, Used TETRA PAK TBA19 200 ml Slim filling lineTechnical Specifications & Performance DataThis used bottling line is a Tetra Pak carton filling and secondary packaging solution built around a Tetra Pak TBA 19 V10 filling machine. The line is configured for the 125 ml Slim carton format and includes filling, straw application, tray packing and conveying equipment for compact beverage production and industrial packaging operations.Filling machine: Tetra Pak TBA 19 V10Format: 200 ml Slim cartonYear of manufacture: approximately 1996Running hours: approximately 26,000 hConveyor length: approximately 30 metersConveyor configuration: 4 × 90° curves and 2 × chain tensionersAdvanced Automation & Control SystemsThe equipment is arranged as an integrated filling and packaging line, allowing the filler, straw applicator, tray packer and conveyor system to operate as connected production stages. The line layout supports consistent carton transfer between individual machines and can be assessed during live online test runs. Electrical ratings, control hardware and automation specifications are not included among the available technical data.Production Line Integration CapabilitiesThis Tetra Pak packaging line combines primary carton filling with downstream straw application and tray packing. The Tetra Pak TCBP 70 Multiinfeed tray packer is compatible with, and configurable for, wrap-around packaging. An optional Tetra Pak TTS 51 tray shrink wrapper is also available for secondary packaging requirements.Machine typeManufacturer / modelYearFilling MachineTetra Pak TBA 19 V101996Various Equipment – Straw ApplicatorTetra Pak TSA 21Various Equipment – ConveyorsConveyor SystemWrap Around PackerTetra Pak TCBP 70 MultiinfeedShrink WrapperTetra Pak TTS 51The conveyor system provides interconnection across approximately 30 meters of the production line. Its curves and chain tensioners support controlled package flow through the filling and industrial packaging stages. This configuration is suitable for operations seeking second hand carton packaging machinery with integrated handling and packing equipment.Machine Condition & Maintenance HistoryAll listed machines have been workshop checked and are in good working condition. The line received... Fgsdszy Rctopfx Albeg

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Complete Used Egg Tray Production Line (Molded Pulp) – 3,500 pcs/hour Complete used molded pulp production line for manufacturing egg trays and a wide range of molded fiber packaging. The line is in excellent working condition and is ready for immediate installation and production. Production capacity: Up to 3,500 pcs/hour (30-cell egg trays) Approx. 77,000 pcs/day Approx. 1,925,000 pcs/month The line can produce: 30-cell egg trays 20-cell and 20A egg trays Egg cartons for 6, 10, 12, 15 and 18 eggs (with corresponding molds) Fruit trays Bottle and cup carriers Shoe inserts Protective packaging for electronics and household appliances Medical trays Seedling pots Disposable tableware Other molded fiber packaging The complete production line includes: Hydropulper and complete pulp preparation system Rotary molding machine Vacuum system Air compressor and air receiver Multi-layer gas drying system with heat recovery Hot air circulation and exhaust system Final thermo-pressing machines Automatic labelling machines for egg cartons (6, 10, 12, 15 and 18 eggs) Electrical control system Mold sets Spare parts Complete technical documentation Advantages: Low power consumption Compact industrial design Reliable and proven technology Fedpfx Aljzlbm Hjbsgg Wide range of molded pulp products Fast installation and commissioning Suitable for both start-up production and capacity expansion Additional services: Installation and commissioning Personnel training Technical support during start-up Production optimization until full operating capacity is achieved The production line is available immediately and ready for shipment. Inspection is possible by appointment. Videos, additional photographs, technical specifications and documentation are available upon request.

Condition: used, Little used Kosme filling line with equipment made between 2020 and 2021. Equipment includes: - Kosme rotary weight-filler, designed for precise filling of liquids such as edible oils, dairy, home care, or personal care products. Fgjdpfx Alezunu Nebeg - Kosme Flexa Sensicol rotary labelling machine. - Kosme and Atlanta S.p.A. packaging equipment.

Condition: ready for operation (used), A complete DIMA mozzarella production line is available. Within this plant, the mozzarella is cooked, salted, cut, sealed in plastic packaging and finally packed in boxes and stacked on pallets. Fgodpfxotnilhe Albog

Condition: used, Used Wine Bottling Line For Glass Bottles of 3L – 2000 BPH Fgjdpsvguwlsfx Albeg Technical features: 150 mm chain Production: 2000 carboys per hour Voltage: 380 Low voltage: 24v Frequency: 50Hz Working direction: right to the left Worktop height: 1240mm Carboy base format diameter: 51, 179 × 340 This line includes big italian brands, like Bardi, Bertolaso and Cavagnino&Gatti. The bottling line ends with labelling equipment, so different packing systems can be attached as needed. This can be standard cardboard boxes or tray plus film or wrap-around system closure. The two bottle sizes worked are 1,5L and 3 L but if needed this can be adapted for 0,75 L too. With additional payment it can be upgraded to create equipment for the inlet and outlet, the 0,75 L bottle size. It has a satin cork corker and aluminium screw cap capper, and an 8 head labeller with two adhesive stations. It performs gravity filling for still liquids. The washer  is for cleaning the new bottles inside and outside for one-way production. Regular maintenance has been done on all equipment of the line, so it can be reassembled without critical problems. Our professional team can help you realize this project, supporting you both in the tech department and with an engineering consultant.  

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow moulder, filler, labeller, packer, and various conveyor and inspection systems. The line reaches up to 36,000 bph at 1.5L and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  - Capacity: - 36,000 bph at 1.5L water - 35,000 bph at 1.5L soft drinks (sweet) - 32,000 bph at 1.5L soft drinks (light) - Formats: - 0.5L and 1.5L bottles - PCO 28-1881 closure - Filling product: - Water and carbonated soft drinks (7.5g CO₂) - Closure system: - Screw caps, fed via chute and tipper (Zalkin + NSM) - Packing: - Shrink pack: 3x2 bottles (double lane) - Pallet type: - Euro (1,200 x 800 mm) - Düsseldorfer (600 x 800 mm) - Electrical specs: - 400 V / 50 Hz - Control systems: ABB, Siemens - Operating direction: Standard Scope of Delivery  - Blow moulder: SIG Corpoplast Blomax 24, year 2008 - 24 stations, heating oven with 20 boxes, ABB control - Incl. Preform tipper MD3, preform hopper SBT, elevator HFT, conveyor RGTD, chute ASTK - Air conveyor: NTS Mistral, year 2000 - Pneumatic adjustable rails, basket cable tray - Filler: KHS Innofill EV-VF, year 2000 - 176 electronic filling valves, valve manifold (APV), air conveyor, infeed worm, clamping star wheel - Screw capper (Zalkin, 22 heads), cap feeding (NSM), foam cleaning (ECOLAB, 2001), dosing units (2011) - Mixer / Deaeration: KHS Innopro DX65 Contimix 65/5-T20, year 2000 -  65,000 l/h, 5 components, Brix meter (Anton Paar), Hilge pumps - Labeller: Sacmi Opera 300 RF 26T/R S1E1, year 2012 - 26 plates, hotmelt, wrap-around, reel-fed, parallel infeed, safety lift version - Inspection & Coding: - Fill level and closure check: KHS Innocheck CUB Vision Circle, year 2013 Fjdpfx Aljwh U Avobjgg - Bottle laser coding: Videojet with housing - Pack inspection: KHS Innocheck CUB, year 2015 - Packing machine: Kisters SP060V, year 2000 - Shrink-packer 3x2 (double lane), 60 cycles/min, manual lane width, foil only - Conveyors & Pack labelling: - Bottle conveyor: KHS Innoline BTR, year 2000, plastic chain, dry lubrication - Pack conveyor: Paxona + Schaefer, year 2009 - Pack labelling: Contact 100, self-adhesive label from reel