Used Krones bottling line for beer in glass 60.000 BPH

Krones

Condition: used, Year of construction: 2004, Overview Krones Lavatec KES bottle washer from 2004, rated at 11,000 bottles per hour. The machine cleans glass bottles in a juice and soft drink bottling line and is still installed and under power. Technical data - Manufacturer: Krones - Model: Lavatec KES - Year of manufacture: 2004 - Output: 11,000 bottles/h Podpfx Aj Agpqwsdlegu - Containers: glass bottles - Electrical supply: 380 V, 3 phases, 50 Hz, 70 A connected load Condition Used, still installed and under power. The line produces until shutdown on 20 November 2026. Inspection on site is possible. Availability Available after shutdown on 20 November 2026. Location: Belgium.

Condition: used, Year of construction: 2024, Overview The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Tech Specs: - Capacity: 9,500 bph - Cell Pitch: 95 mm Pgodpfxovrfivj Adleu - Bottles per row: 25 - Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg - YOM 2024 - Formats: - 0,25l - 0,33l - 0,5l - 0,75l The Machine in Detail / Equipment Features: - Heated by steam - Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing - CE certified - Chemical Dosing Pumps - Machine data sheet included - High pressure pre rinsing - Rotating Spray nozzles - Single End Machine - Label discharge rear right - Finger discharge + finger feed - Bottle cells made of plastic - Concentration measurement - NaOH supply liquid - Sectional view arrangement of baths - Spindles SST - 24 volt control voltage - Control Siemens S7 - Regularly maintained - Full machine body in SST - Vapor Discharge - Machine dismantled, ready to ship - Automated machine Startup

Condition: used, Year of construction: 2015, Overview Complete hot-fill glass bottle line for soft drinks and juices, built around a Krones Modulfill filler with Variojet rinser from 2015 and rated at 13,000 bottles per hour on 1 l and 22,000 bottles per hour on 0.25 l. The line runs non-returnable glass: depalletizing, rinsing, hot-fill filling, a White Cap twist-off capping machine behind the filler, hot-fill pasteurization, cooling, full bottle inspection, labelling on a Krones Prontomatic and a Langguth labeller, sleeving, tray and carton packing, incrating and palletizing, with buffer table. Two cappers are part of the line. Technical data - Products: soft drinks, juices - Containers: non-returnable glass bottles 0.25 l - 1 l - Line output: 13,000 bottles/h on 1 l, 22,000 bottles/h on 0.25 l Pgedpe Agpk Aefx Adlju - Years of manufacture: 1987 - 2016 Scope of Delivery Type | Manufacturer | Model | Description | Year - Glass depalletizer | Legendre | 16,000 bottles/h | 1999 - Rinser | Krones | VARIOJET | 13,000 bottles/h on 1 l, 22,000 bottles/h on 0.25 l | 2015 - Filler | Krones | MODULFILL | 13,000 bottles/h on 1 l, 22,000 bottles/h on 0.25 l | 2015 - Twist-off capping machine | White Cap | arranged behind the filler - Bottle inverter | Polyketting | 12,000 bottles/h | 2004 - Hot-fill pasteurizer | APV | 15,000 l/h | 2005 - Bottle cooler | SEN | 1987 - Full bottle inspector | Heuft | SPECTRUM TX | 22,000 bottles/h - Labeller | Krones | PRONTOMATIC | 15,000 bottles/h | 2006 - Labeller | Langguth | 13,200 bottles/h | 2004 - Sleever | Sleeve Technology | 16,000 bottles/h | 2016 - Buffer table | Krones | 2006 - Tray packer | SMI | 16,000 bottles/h | 1996 - Incrater | Stork | 16,000 bottles/h | 1996 - Carton erector | Kettner | KAF | 12,000 bottles/h | 1999 - Carton closer | Kettner | HDV | 12,000 bottles/h | 1999 - Palletizer | Kettner | PRESSANT UNIVERSAL | 17,000 bottles/h | 1996 Condition Used, still installed. The line produces one last time from 1 to 20 November 2026. Availability Available after shutdown on 20 November 2026. Location: Belgium.

Condition: used, Year of construction: 2004, machine/vehicle number: LC637, Used Sidel-Krones PET bottling line 18000 BPHTechnical Specifications & Performance DataThis complete used bottling line is engineered for PET bottle handling and optimized for still water applications. Built with premium components from Sidel, Krones, AROL, SMI, Twinpack, ACMI, TOSA, ., and Videojet, it delivers consistent performance at industrial scale. The line operates at a production capacity of 18,000 bph and is configured for the most common market formats.Production speed: 18,000 bph 2L, 23.000 BPH 0,5L Container types: PET bottlesBottle formats: Compatible with 0.5L and 2.0L bottle formatsPrimary components: Sidel SBO 16 Series 2 blow molder (16 molds), Sidel ALSIM gravity filler (63 valves), AROL capping system (pre-threaded plastic caps), Krones CONTIROLL roll-fed labeler (1 station, 16 bottle plates), SMI SK452 F shrink wrapper, Twinpack MHTE handle applicator, ACMI PASAR P130 2L layer palletizer, TOSA 125 + 475 ring pallet wrapper, . R 13/2 preform tipper, Videojet 3210 laser coderAir recovery: Integrated with blow molderChiller: Not includedTooling: Blow molds not includedBuild years (components): 2000–2024Advanced Automation & Control SystemsThe line integrates modern automation features across critical stations to ensure stable performance and high-quality output in beverage production. The Krones CONTIROLL labeler features electric head adjustment for precise label placement, while the capping system by AROL uses a pick & place distribution to ensure reliable application of pre-threaded plastic caps. The Sidel ALSIM filler operates within a pressurized cabin equipped with filters to support hygienic filling conditions.The Sidel blow molder includes an air recovery system to optimize compressed air utilization. Operator interfaces across the equipment provide intuitive adjustment and monitoring, supporting quick startups, changeovers, and routine operations in high-throughput environments typical of industrial packaging.Production Line Integration CapabilitiesThis second hand used bottling line is designed for seamless integration from preform handling to end-of-line palletizing. The . preform tipper, hopper, elevator, and preform infeed supply the Sidel SBO 16 Series 2 rotary blow molder. Downstream, the gravity filler and AROL capping machine form a robust monobloc for consistent filling and closure application. The Krones CONTIROLL labeler applies plastic wrap-around labels via a roll-fed station, supported by a Videojet 3210 laser coder for high-contrast coding. Secondary and end-of-line packaging are handled by the SMI shrink wrapper, Twinpack handle applicator, ACMI layer palletizer, and TOSA ring wrapper.Inline configuration from preform tipping through palletizingFormat change capabilities for 0.5L and 2.0L PET bottlesSuitable for water production with PET containersMachine Condition & Maintenance HistoryThis used bottling line is presented in working condition with components manufactured between 2000 and 2024, including a recent 2024 Videojet coder for coding in... Pgjdpfxsz E Dk Ee Adlju

Year of construction: 1991, condition: ready for operation (used), The filling line includes (1) Empty Glass Lifter Kettner Presant Super, year of construction: 1990 (2) Rinser Krones Gripstar, year of construction: 1991 (3) Filler Krones FKVCF 110, year of construction: 1991 (4) Natural Corker Bertolaso Delta 416S, year of construction: 1991 (5) Cork Conveyor (6) Wiring Machine Kematec Dratomat 20, year of construction: 1991 (7) Depalletiser Schneider EPA 211, year of construction: 1991 (8) Depalletiser Schneider EPA 505, year of construction: 1991 (9) Capsule Machine Robino Zenith 2-32 Otticoo, year of construction: 1991 (10) Labeller Krones Solomatik 20-8-4, year of construction: 1982 (11) Case Packer Kettner Robot BE3/CT, year of construction: 1990 (12) Paternoster for case transport (13) 2x Case Erector Kettner KAF 2400 F, year of construction: 1996 (14) Capper Kettner HD 2500, year of construction: 1990 (15) Pallet Loader Kettner Pressant Universal, year of construction: 1990 (16) Binder Born HB R 240/430, year of construction: 1990 (17) Pallet Roller Conveyor (18) Roller Conveyor, output: 18,000 bottles/h, with documentation, suitable for champagne botttles, the line has not been used for 10 years. Pgodpfxek Nm Nrs Adlsu

Condition: used, Year of construction: 2003, Overview This Krones Sander Hansen tunnel pasteurizer was built in 2003 for the pasteurization of beer in glass bottles. It is a double-deck machine with a nominal capacity of 40,000 bottles per hour on 0.5 l bottles. Its 12 treatment zones - 4 regenerative zone pairs and 4 pasteurizing zones - cover a treatment area of 241.6 m². At the design point it delivers 25.3 PU at 60 °C, with a total treatment time of 54.2 min (17.2 min heating, 19.9 min pasteurizing, 17.2 min cooling) from an inlet temperature of 12 °C to an outlet temperature of approx. 35 °C. Technical data - Manufacturer: Krones (Sander Hansen) - Year of manufacture: 2003 - Machine type: double-deck tunnel pasteurizer - Capacity: 40,000 bottles/hour (0.5 l glass bottles) - Treatment area: 241.6 m² - Decks: 2, main conveyors: 2 - Zones: 12 in total (4 regenerative zone pairs, 4 pasteurizing zones) - Max. spray temperature: 64.5 °C - Water content: 38.9 m³ in total (20.6 m³ in the zones, 18.3 m³ in the buffer tanks) - Steam: 2,270 kW design flow, approx. 1,100 kW in balanced operation - Main water: 77.8 m³/h design flow, approx. 1.0 m³/h in balanced operation - Compressed air: 5 m³/h - Electrical: 215 A rated current, 141.3 kVA, 113 kW, cos phi 0.80 - Overall length without operator platforms: approx. 24,752 mm - Width: approx. 5,580 mm (7,680 mm incl. pumps and operating area) - Pump side: right, seen from the infeed - Empty weight: approx. 74,000 kg (163,200 kg with product and water) - Largest section for transport: 12,000 x 1,100 x 2,250 mm - Transport: approx. 12 x 40 ft containers or trucks Equipment - Stainless steel housing with external circulation pumps and piping - Buffer tanks for regenerative water management - Local push-button control stations with emergency stops along the machine - Electrical cabinets and field terminal boxes - Operator platform with stairs Pgsdpfx As Af Tkhedlju Scope of supply The associated conveyor systems are not included. The scope of the conveyor system can be seen in the photos. Condition Used, still installed. The machine can be visited. Dismantling and loading can be carried out by the seller. Availability From 28 October 2026. Location: Poland.

Year of construction: 2011, operating hours: 10,500 h, condition: used, machine/vehicle number: ISP17, Used Inspector KRONES Linatronic K735 year 2011 The Used Inspector KRONES Linatronic K735 year 2011 offers a proven and efficient solution for quality control in high-performance bottling lines. The German manufacturer KRONES, a global leader in beverage industry automation, built this model with reliability, precision, and modular construction in mind. As a result, this inspector fits seamlessly into industrial environments that demand high accuracy and operational consistency. Electrical characteristics and technical configuration of the Used Inspector KRONES The Used Inspector KRONES Linatronic K735 year 2011 runs on a three-phase power supply at 400/230 volts, with a 50 Hz frequency and a 13-ampere current draw. Consequently, it aligns with European industrial standards and supports stable operation under demanding conditions. Furthermore, the electrical system includes integrated safety devices that protect the components from overload or malfunction. In addition, the compact and durable enclosure facilitates easy integration into existing production layouts. Year of production and machine hours KRONES produced this unit in 2011. Since then, the machine has logged 10,500 operating hours, which reflects moderate usage for equipment designed for industrial use. Compared to other models with similar functionality, this unit maintains good performance standards. Moreover, the machine structure shows minimal wear, confirming its careful maintenance. Therefore, technicians can expect reliable functionality without immediate need for major refurbishment. The machine is currently operational, specifically until Easter. Then it will be dismantled.  Supported inspection types The Used Inspector KRONES Linatronic K735 year 2011 is equipped with a comprehensive range of inspection functions to ensure the quality and integrity of each bottle. -The system performs bottom inspection to detect chips, cracks, or foreign objects at the base. -The sidewall (walls) inspection uses a rotating mirror and cameras to identify defects such as scratches, cracks, or dirt on the entire lateral surface. Pedpfx Ade Adyv Uslegu -The neck finish and thread inspection ensures that bottle openings are free from damage or deformation that could compromise sealing or capping. -Scuffing inspection checks for surface abrasions that indicate excessive wear. In addition, the machine employs infrared (IR) and high-frequency (HF) technology to detect residual liquid, ensuring the bottles are dry and ready for fill...

Year of construction: 2013, condition: excellent (used), functionality: fully functional, machine/vehicle number: A05, Mondomix - Minimondo A05 Buhler Podpovv S Itjfx Adlogu Model A 05. (2013) (previous used : food products) Capacity : 5 - 45 Litres/Hr. Density produit : Input: 1,0 kg/l - Output: 0,4-0,5 kg/l Jacketed stator System complete: - Systèmes de dosage manuel et automatique de l'air System with airinjection manual and automatique - with stainless steel control cabinet - 2 stainless steel hoppers capacity 12,5 litres - indag inline mixer type DLM1 Last used in a Pilot Plant 220v 1 phase 50/60hz. 8 Bar.

Condition: used, Year of construction: 2006, machine/vehicle number: ET249, Used KRONES CANMATIC-COMBI labeller machine 40000 BPHTechnical Specifications & Performance DataThis Krones Canmatic-Combi labeling machine is engineered for high-speed beverage production and industrial packaging applications. It combines proven hot-melt technology with robust mechanics to deliver precise wrap-around labeling using pre-cut paper labels on PET bottles. Suited for integration in a used bottling line or as a second hand standalone unit, it provides stable performance across a wide range of beverage products.Manufacturer: KronesModel: Canmatic-CombiYear of construction: 2006Production speed: 8,000–40,000 b/h (maximum 40,000 b/h)Container types: PET bottlesCurrent bottle format: 1.0LLabel type: Pre-cut paperLabel application: Hot glueMachine pitch: 125 mmNo. of plates: 30Rotation direction: CounterclockwiseLabel magazines: 2Dimensions (L x W x H): 5000 x 5200 x 2600 mmElectrical supply: 400 V, 3 PH, 50 HzRated current: 22 ACompressed air: 7 barPLC: SiemensHMI: KronesIncluded equipment: Krones Checkmat prepared for tax stamp/neck-collar label; Nordson hot-melt unitAdvanced Automation & Control SystemsThe machine is equipped with a Siemens PLC for reliable automation and a Krones HMI for intuitive operation and recipe management. Hot-melt application is supported by a Nordson unit for consistent adhesive delivery and temperature control. Dual label magazines enable uninterrupted production with efficient reel changeovers, supporting continuous operation at high speeds.Production Line Integration CapabilitiesThis labeling machine integrates seamlessly with upstream fillers and downstream inspection and packing equipment in beverage production lines. It can operate inline or as a standalone station with conveyor interfaces. With the currently set 1.0L PET format and optional changeover kit available separately, it can be adapted to additional standard bottle volumes within the machine’s handling range. The configuration is suitable for wrap-around labeling and predisposed for neck-collar tax stamp application, enhancing multi-product flexibility in industrial packaging.Machine Condition & Maintenance HistoryThe unit has been overhauled and guaranteed, ready for immediate operation. It is offered with a 6-month warranty and is supplied with compatible spare parts provision. This condition ensures minimized commissioning time and reliable startup within a used bottling line or second hand packaging environment.Operational Performance & VersatilityEngineered for pre-cut paper labels with hot glue, the Canmatic-Combi provides stable label positioning at high throughput. Dual magazines support diverse labeling tasks and reduce changeover interruptions. The included Krones Checkmat is prepar... Pgodpfx As Adyu Dodlou

Condition: used, Year of construction: 2010, machine/vehicle number: ET244, Used KRONES STARMATIC labeller machine 20000 BPHTechnical Specifications & Performance DataManufactured by Krones, the Starmatic is a rotary cold glue labeling machine engineered for precise application of pre-cut paper labels on glass bottles. This second hand unit is an excellent fit for a used bottling line where reliable labeling performance and easy integration are required.Production speed: up to 16,000 bphContainer material: GlassCurrent bottle format: 1.0LLabel type: Pre-cut paperLabeling method: Cold glueMachine type: Rotary, clockwise rotationNo. of plates: 16Machine pitch: 187 mmLabel magazines: 2Dimensions (L x W x H): 3200 x 3000 x 2500 mmWorking height: 1200 mmElectrical supply: 400 V, 3 PH, 50 HzCurrent draw: 17 ACompressed air: 7 barYear of manufacture: 2010Advanced Automation & Control SystemsThe machine is equipped with proven automation and operator interfaces to support consistent, high-quality label application in beverage production environments.PLC: SiemensHMI: Krones iPanel CDProcess control: Integrated temperature control and Krones Checkmat-based control functionsOperator-friendly setup and repeatability for format adjustmentsDesigned with rotary precision for stable bottle handling and label transferProduction Line Integration CapabilitiesThe Krones Starmatic integrates seamlessly into industrial packaging and beverage production lines. It can work inline with upstream rinsing and filling equipment and downstream capping and inspection systems. With two label magazines and rotary handling, it supports rapid operation within a complete packaging machinery layout.Inline or standalone operation with standard conveyorsDesigned for glass bottle handling in 1.0L formatSuitable for integration into used bottling line upgrades and second hand line expansionsMachine Condition & Maintenance HistoryThis unit is overhauled, tested, and ready for immediate operation. It is offered with compatible spare parts and a commercial guarantee to support rapid commissioning and dependable performance.Condition: Overhauled and guaranteedAvailability: Ready for operationWarranty: 6 monthsOperational Performance & VersatilityEngineered for high-quality cold glue labeling with pre-cut paper labels, the Starmatic delivers accurate positioning and secure adhesion for a wide variety of beverage categories. It is well suited for premium branding where paper labels and glass packaging are preferred.Ideal for beverage production including water (still and sparkling), CSD, beer, wine, spirits, and also suitable for ... Pode Adyuwjpfx Adlogu

Condition: good (used), Item: AJ-Hamba BK6005/5 Filling machine for cups HAMBA BK 6005/5 cup filling and sealing machine Podpfxji Atkqj Adlsgu Made in Germany In good used condition. The machine can be used for filling yogurt and similar products in cups. Capacity: 8000 - 10000 cups/ h Lanes: 5-Lanes longitudinal machine Actual Cup-size: Ø 75 mm Height: 90 mm Main Filler: - manufacturer: Hamba - filling range: 100 cm³ to 250 cm³; - cleaning: CIP-able Closure: Sealing Date Device: Stamp Measurements (lxwxh): 4,3 m x 1,3 m x 2,2 m Power: 380 V; 21 A; 8 KW

Condition: used, Year of construction: 1998, machine/vehicle number: ET237, Used KRONES CONTIROLL labeller machineTechnical Specifications & Performance DataThis rotary roll-fed labeling machine is engineered for high-efficiency wrap-around application of OPP film labels with hot glue on PET bottles. Manufactured by Krones in 1998, it is suitable for integration into a used bottling line and broader industrial packaging environments focused on beverage production.Manufacturer: KronesModel: ContirollMachine type: Rotary roll-fed labeling machineProduction speed (max): 18,000 containers/hourContainer material: PETCurrent bottle format: 1.5LLabel type: OPP (roll-fed, wrap-around)Adhesive: Hot glueWork direction: CounterclockwisePlate rotation: Cam-drivenNumber of reels: 2Max reel diameter: Ø 500 mmTable height: 1200 mmElectrical supply: 400 V, 3 PH, 50 HzInstalled power: 24 kWHMI: Krones CTS10PLC: Siemens S5 (upgrade to Siemens PLC available on request)Year of manufacture: 1998Advanced Automation & Control SystemsThe machine is controlled via a Siemens S5 PLC with a Krones CTS10 HMI, providing reliable automation and operator-friendly interfaces. An optional upgrade to a newer Siemens PLC is available, enhancing diagnostics, recipe handling, and network integration. Cam-driven plate rotation ensures synchronized label application with consistent accuracy and repeatability at high speed.Siemens PLC with Krones CTS10 HMIOptional PLC upgrade for enhanced performanceElectrical: 400 V, 50 Hz, 3-phaseInstalled power: 24 kWPrecision cam mechanisms for stable, high-speed operationProduction Line Integration CapabilitiesThis second hand labeler is well suited for inline integration with rinsing, filling, capping, and inspection equipment within a used bottling line. It manages PET containers with roll-fed OPP labels and hot glue, supporting wrap-around labeling common to beverage SKUs. The current setup handles 1.5L formats, and the dual-reel configuration facilitates efficient changeovers and continuous operation.Standalone or inline operation within complete bottling and packaging machinery systemsDesigned for PET bottles; wrap-around OPP labelsDual-reel system for reduced downtimeAdaptable to multiple beverage formats typical in beverage productionMachine Condition & Maintenance HistoryThe equipment is ready for operation, overhauled, and supplied with compatible spare parts. A 6-month warranty is offered. Its condition supports immediate deployment in production environments seeking reliable labeling performance.Ready for operationOverhauled and guaranteedWarranty: 6 monthsCompatible spare parts included... Podpfx Ado Adyuqjlsgu

Condition: used, Year of construction: 1998, machine/vehicle number: ET240, Used KRONES CONTIROLL labeller machine 12000 BPHTechnical Specifications & Performance DataThis rotary labeling machine is engineered for high-efficiency roll-fed OPP labeling with hot melt application, ideal for second hand industrial packaging environments and integration into a used bottling line. Manufactured by Krones, it combines robust mechanical construction with precise label application for beverage production.Manufacturer: KronesModel: ContirollYear: 1998Production speed: up to 12,000 bottles/hourContainer types: Designed for PET bottle handlingCurrent bottle format: 1.0LLabel type: OPP (oriented polypropylene), roll-fedAdhesive: Hot glueLabel placement: Wrap-aroundMachine type: RotaryWork direction: ClockwiseNo. of plates: 16Machine pitch: 152 mmLabel magazines: 2Electrical: 380 V, 3-phase, 50 HzRated current: 31.06 ACompressed air: 7 barApprox. footprint (layout): 2550 x 2248 mmAdvanced Automation & Control SystemsThe machine is equipped with a Siemens PLC for reliable control and a Krones HMI for intuitive operation. Automatic label position management supports repeatable format changes and precise wrap-around placement. The control architecture facilitates diagnostics, recipe handling, and line communication, supporting high uptime in beverage production and industrial packaging workflows.PLC: SiemensHMI: KronesHot-melt application system for OPP roll-fed labelsOperator-friendly adjustments and recipe storageInterlocked access doors and safety circuitsProduction Line Integration CapabilitiesThis Contiroll labeler integrates seamlessly into existing bottling equipment layouts. It can operate as a standalone labeling machine or inline with rinsing, filling, and capping systems in a used bottling line. With two label magazines for continuous roll changeover, it supports consistent production without frequent stops.Inline or standalone operationOptimized for PET cylindrical bottlesCurrent setup: 1.0L format; format change kit available upon separate offerSuitable for beverage production lines handling multiple SKUsMachine Condition & Maintenance HistoryThe machine has been overhauled and is guaranteed ready for operation. It is supplied with compatible spare parts and includes a 6-month warranty to support a reliable startup and rapid commissioning. Overall condition aligns with high standards expected from second hand Krones labeling equipment.Status: Overhauled and guaranteed ready for useWarranty: 6 monthsIncludes compatible spare partsOperational Performance & VersatilityEngineered for wrap-around... Podpj Adyudofx Adlsgu

Condition: used, Year of construction: 2000, machine/vehicle number: LC574, Technical Specifications & Performance Data This used bottling line is a complete isobaric PET solution engineered for high-volume beverage production of still water, sparkling water, and carbonated soft drinks. Built around robust Krones and Simonazzi process equipment with a Sidel SBO14 S2 blow molder, it offers dependable industrial packaging performance with consistent product quality. Pjdpfxjw D E Ubj Adlogu Line type: Used isobaric PET complete bottling line (second hand) Nominal speed: up to 18,000 bottles/hour (configured for 2.0 L PET; format-dependent) Bottle formats: 0.10 L and 2.0 L; additional formats possible with change parts Container type: PET (air-conveyed handling) Product range: Water (still and sparkling), CSD Core technology: Isobaric rinsing/filling/capping monoblock with downstream labeling and end-of-line packaging Line composition: Approx. 14 integrated machines including blow molder, air conveyors, rinser, isobaric filler, capper, labeler, packer/shrink wrapper, palletizer, stretch wrapper, inspection and coding modules Main manufacturers: Krones, Simonazzi; blow molder: Sidel SBO14 S2 Years: Main line 2000; blow molder 1999 Condition: Ready for operation; safety features included Advanced Automation & Control Systems Centralized PLC/HMI control coordinates blow molding, rinsing, isobaric filling, capping, labeling, and end-of-line functions. Recipe management supports format and product changeovers, with synchronized conveyors and VFD-driven motors to maintain constant flow at high speed. Line accumulation and defective-bottle rejection are integrated to minimize downtime and scrap. Automation level: Fully integrated, recipe-based operation Operator interface: Intuitive HMI with alarm diagnostics and production reporting Electrical: Industrial 3-phase supply (typical 400–460 V, 50/60 Hz; to be confirmed on inspection) Safety: Interlocked guards, emergency stop network, and category-rated safety circuits Production Line Integration Capabilities Designed for seamless integration across the packaging hall, the line interfaces upstream with preform handling and syrup room/premix systems and downstream with packers, palletizers, and warehouse logistics. Fast format change procedures and clearly defined change parts enable efficient switching between bottle sizes and product SKUs. Compatible with standard beverage production utilities (CIP, CO₂, chilled water) Interfaces available for inspection systems, laser/inkjet coding, and vision verification Modular conveyors allow adaptation to plant layouts and future upgrades Machine Condition & Maintenance History This second hand complete bottling line is in ready-for-operation condition with safety protections installed. The equipment has been maintained in a production environment and inspected for functional performance. Maintenance records, documentation, and layout drawings can be made available for review during a technical visit. Operational Performance & Versatil...

Condition: used, Year of construction: 2002, Overview This PET filling line was manufactured in 2002 by Krones (Germany). The line is designed for carbonated beverages such as beer or lemonades, and also suitable for water with or without CO₂. With an output capacity of up to 12,000 bph (0.5 L), it offers a complete solution from bottle blowing to palletizing. The line is being sold due to modernization of the PET division and replacement with a higher-capacity system. Equipment is in good condition and still fully operational. Technical data  - Line capacity: - 12,000 bph at 0.5 L - 9,000 bph at 1.0 L - 8,000 bph at 1.5 L - 6,000 bph at 2.0 L - Formats: 0.5 L, 1.0 L, 1.5 L, 2.0 L - Neck finish: PCO 1881 - Max. bottle diameter: 106 mm - Products: Beer (+4 °C), Kvass and lemonades (+10 °C), still and carbonated water - Labelling: Wrap-around, pre-cut paper labels, hot-melt - Secondary packaging: Film only (4×3 and 3×2) - PLC: Siemens S7-300 - Power supply: 400 V, 3PH, 50 Hz, TN-S Scope of Delivery - Blowing machine | Krones | Contiform S8 | 2002 | Incl. preform feeding, chiller, box titling unit - Rinser | Krones | Variojet | 2002 | Rotary - Filler | Krones | Mecafill | 2002 | Rotary, isobaric filler for CSD and beer - Labeller | Krones | SV 360-10-113 | 2002 | Rotary - Labeller | Krones | Canmatic 600-10 | 2002 | Rotary, hot-melt - Packer | Krones | Variopac FS-45 | 2002 | Film packer, 4×3 / 3×2 formats - Palletizer | Krones | Pressant Compact 1N | 2002 - Stretch wrapper | Robopac | Rotoplat | 2002 - Air conveyor | Krones | Airco S | 2002 | For blown PET bottles - Bottle conveyor | Krones | Synco S | 2002 | For filled and labelled bottles - Pack conveyor | Krones | Multico S | 2002 | For product packs - Pallet conveyor | Krones | — | 2002 | For pallet transport - Peripheral equipment | Krones | — | 2002 | Cap feeding system, hopper, valve manifold Pgjdpfx Aexhf Hiodlou Included in the price - Dismantling - Loading onto trucks - Export documents