Used Manurhin K`mx 20 for sale (57,531)

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 48 V, total height: 784 mm, total length: 1,035 mm, total width: 533 mm, Tested forklift battery for your truck - 48V 5PZS 775Ah - DIN B + 1-year warranty + Includes Aquamatic system + Includes end discharge cables & REMA 320 plug (other plug types can be fitted upon request) + Capacity: min. 90-100% (C5 capacity protocol supplied with delivery) + Year of manufacture: 2024 Dimensions: Length 1,035 mm Width 533 mm Height 784 mm Weight: approx. 1,160 kg Suitable for the following models and more: Linde A (1120) - 5022-00 Linde A - 5224-00 Linde E 16 - 386-00 Linde K - 5231-00 Linde K - 5231-00 - side battery change Linde K 10 Linde K 12 Linde R 14 N - 1120-00 Linde R 14 N - 1120-00 - front battery change Linde R 16 N - 1120-00 Linde R 16 N - 1120-00 - front battery change Linde R 16 N HD - 1120-00 - front battery change Linde R 20 N - 1120-00 Linde R 20 N - 1120-00 - front battery change Linde R 20 N - 113-00 Linde R 20 N - 113-00 - vertical battery change Linde R 20 SN - 115-08 - vertical battery change Still EK 11 Still FM-X 14 N Still MX 10 Still R 20-16 Still RX 20-18 Still RX 20-18 P Still RX 20-20 Still RX 20-20 PL Jungheinrich ETM 214 Jungheinrich ETM 216 Jungheinrich ETV Jungheinrich ETV C 16 Jungheinrich ETV Q 20 Bodpfx Amoy Rnn Rorewu Crown ESR 5220-1.6 Caterpillar NOH10NH Caterpillar NR20NH Common battery sizes available - please enquire. Delivery possible.

Condition: like new (used), Cutter, 120 liters, stainless steel 6 steplessly adjustable knife speeds 2 separate bowl speeds 2 mixing speeds Completely made of special stainless steel 120-liter bowl volume, stainless steel 1 three-phase main motor, IP 23 S, 80 kW power Dimensions in cm: Width: 210.0 Depth: 135.0 Height: 210.0 (cover open) Bsdpfx Asz H Tu Aomrswu 6 cutting knives Total installed power: 84 kW

Condition: good (used), Horizon VAC-100a + VAC-100c + SPF-20 + FC-20 Booklet Maker The machine is in very good condition, well-maintained, and ready to work. Made in Japan. The line consists of: – Horizon VAC-100a / VAC-100c Max size: 350x500mm Min size: 120x148mm Vacuum feeding 10 shelves Bwsdpfx Aezur A Rsmrou Stack height: 55mm Basic weight: 40-270g 230V power supply Weight: 310kg/piece Touchscreen control Jam, double-feed, and no-feed sensors Ability to save 9 preset jobs to the machine’s memory Horizon SPF-20 Max size: 500x350mm Min size: 120x180mm Wire stitching Folding Two Hohner heads (max. 4) 230V power supply Weight: 490kg Horizon FC-20 Cutting capacity: 88 sheets 230V power supply Weight: 240 kg The machine includes: an LC-20 delivery system, additional EAB-100 compressors, a PK-20 packaging kit, a PJ-75 jogging system, operating tools, spare parts, and full documentation with parts catalogs.

Condition: used, Year of construction: 1986, year of last overhaul: 2008, TEXTILE FABRIC STENTER – MONTFORTS MONTEX 12 G/K Horizontal chain, Pin and Clip For sale: Montforts Montex 12 G/K textile fabric stenter line, well-equipped and suitable for drying, finishing, coating, and fabric straightening applications. Make: Montforts Model: Montex 12 G/K 220cm Year of manufacture: 1986, Major overhaul: 2004, including replacement with economical type burners. Refurbished: 2008, then after only few years in use preserved and stored. Working width: 220 cm Drying chambers: 6 Heating: Liquid gas and natural gas Fabric conveying system: Horizontal chain, pin and clip Accessories and additional equipment Küsters foulard Isotex coating unit, model SR Mahlo straightener, model RFMC-74 AN Selvage cutting units 2 cooling cylinders Chemical station with tanks: 1300 L, 1100 L, 2 x 500 L All tanks fitted with mixers Heat recovery system installed above the drying compartments MACHINE IS REFURBISHED , PROFESSIONALLY MARKED, DISMANTLED, STORED IN MILL-FLOOR - VIDEO AVAILABLE For more information, technical details, photos, or video , please get in touch. Shipping possible immediately. Bwjdpfx Amoy A S Thsrou

Condition: used, Year of construction: 1985, 32 mm 12 mm stroke 330 mm pulling capacity 3,0 t total power requirement 1,2 kW weight of the machine ca. 0,65 t dimensions of the machine ca. 1,2 x 0,8 x 1,2 m Keyway broaching and slotting machine with accessories as shown. Bsdpfx Amswkvtherewu Good condition.

Condition: used, machine/vehicle number: S.20.017AP, Working Way: Right-Lift Bwjdpfsz Ianrsx Amrju

Condition: ready for operation (used), Year of construction: 2020, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 1.302.981, overall weight: 280 kg, load capacity: 20 kg, arm reach: 1,813 mm, controller model: KR C4 NA UL, No minimum price – guaranteed sale to the highest bidder! The offer includes only the robot without the enclosure! The enclosure can be purchased separately for an additional €3,500! TECHNICAL DETAILS Payload: 20 kg Reach: 1,813 mm Bedpezvmm Tjfx Amrjwu MACHINE DETAILS Controller: KR C4 NA UL Total weight: 280 kg Operating hours: approx. 500 hours EQUIPMENT Teach pendant (manual control) Safety enclosure with Siemens PLC 2 × SICK laser scanners 4 × Light curtains

Condition: good (used), Force measuring device, force measuring instrument, calibration, force measurement technology, load cell, tensile force measuring bearing, force sensor, tensile and compressive force sensor -Manufacturer: Lorenz, 4 pieces tension and compression force sensor with Durbal, rod end spherical bearing -Sensor: Lorenz Type K-12 -Measuring range: - 100 kN Bwjdpfx Aog Sxyvomreu -Sensitivity: 1.000mV/V / 0.999mV/V / 1.001mV/V -Swivel bearing: Durbal EF 35-20-501 -Dimensions of the articulated rod: 445 to 530 x 81 x 65 mm -Fork head: Bore Ø 35 mm -Number: 3 boxes available, sensitivity as shown in photos -Price: per box -Box dimensions: 590/390/H200 mm -Weight: 30.2 kg/box

Condition: new, Year of construction: 2016, -1- unused pressure plate for Krupp, O&K, Weserhütte ES jaw crusher EB 1200 x 960, dimensions approx. 1150 x 530 x 130 mm, wedge 70 mm Bwsdpfx Aswqf Dpjmrsu

Year of construction: 2000, condition: used, machine/vehicle number: SIxx, Demag chain hoist crane hoist 5000 kg DKUN 20-2500 K V1 F4 Payload 5000KG / 5t payload / lifting load - 2-strand with 2 lifting speeds, lifting height approx. 6m without control bottle, complete with lifting eye and chain storage Complete weight approx. 120 kg, connection to 400V 50Hz Used Condition Bwodpfjrft Nzsx Amrsu Item location is 75053 Gondelsheim See pictures

Condition: used, Year of construction: 1988, turning diameter over bed 2000 mm turning diameter over slide rest / mm turning length / mm - Type 1 K 671 320 F3 - Year of manufacture 1988 (first commissioned in 1998) - Turning length 10,000 mm - Turning diameter over bed 2,000 mm (modified) - Faceplate diameter 1,950 mm - Faceplate clamping range 400 - 1,350 mm - Speeds 1.00 - 140 rpm - Torque 125,000 Nm - Main cutting force 130 kN max. - Automatic swiveling tailstock - Max. workpiece weight 70 tonnes - Max. workpiece weight with steady rest 100 tonnes - Drive power 100 kW - Number of bed ways 4 - Dimensions 22,000 x 6,200 x 2,900 mm Bjdpfx Amjxn Tz Iorjwu - CNC control SIEMENS 840D (2010 for €220,000.00) - Support feed X-Z 0.3 - 4,000 mm/min. - Support rapid traverse X-Z 4,000 mm/min. - Inner cone dimensions 140 x 1:7 - The machine complies with CE guidelines - Includes 2 steady rests, 1 roller block, 4 jaws, boring device - Condition: very good condition

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 6582018005, year of last overhaul: 2025, workpiece weight (max.): 2,000 kg, power of the milling unit: 8,400 W, disc diameter: 250 mm, cutting length (max.): 30 mm, Подробна информация за машините е описана в прикачения файл. Bjdpfxjztxv Us Amrjwu Detailed information about the machines is provided in the attached file.

Condition: used, Year of construction: 2003, Single-sided edge trimming and gluing machine Manufacturer: IMA Type: AVM/K/I/G80/822/S3R3L20 Year of manufacture: 2003 For milling, edge gluing, and finishing for a standard groove - only for pre-shaped/pre-grooved doors and square-edged doors Left-hand machine (fixed stop on the left). Complete processing in 3 passes 1st pass: Processing of the top surface of the door (transverse processing) 2nd pass: Door long edge 3rd pass: Door long edge During the 2nd and 3rd passes, the protruding transverse edge from the 1st pass is milled off by using a co-rotating/counter-rotating milling process. Double groove gluing is only possible through modifications to the machine and subsequent manual finishing of the edge. Max. door thickness: - Straight edge: approx. 70 mm - Groove gluing: approx. 60 mm Stable machine frame as a support for aggregates and housing for electrical installation. Drive for feed speeds of approx. 5-25 m/min., mechanically infinitely adjustable. (not to be confused with processing speed) Continuous, plastic-coated strip-type conveyor chain, approx. 80 mm wide, with automatic central lubrication. Manually height-adjustable top pressure with a V-belt 80 mm wide and spring-loaded, ball-bearing guide rollers. Machine length approx. 10,900 mm Infeed table at the machine inlet. 1 horizontal, manually adjustable, unheated stop bar 1 joiner milling unit controllable, not swiveling, without sensing with 2 motors, each 3 kW Gluing unit for optional operation of straight edge or softforming gluing, by changing the glue application. Edge material: - Strips: up to 1.3 mm - Roll material: 0.4-3 mm - Solid wood strips: 6 mm Strip length max.: 2550 mm Strip height: 14-80 mm (depending on glue application) with: - Side adjustment by hand for the pneumatically controlled glue application. - Height adjustment by hand -15mm downwards and up to +10mm upwards. 1 bell for the main pressure roller, manually adjustable 1 glue application 0.8L, max. edge height 70mm, straight edge with pneumatic quick-release, Chem-Coat coated, electronic temperature control 1 hot melt glue application 0.8L with quick-release, up to max. 80 mm high edge material, soft edge, Chem-Coat coated, with temperature control and control unit for the strip coating 1 automatic Quickmelt hot melt glue feeder with a heating power of 5.0 kW 1 2-fold magazine Bjdpfxozuykve Amrswu only for edge material up to 3.0 mm thick, can be manually attached to the single-roll magazine 1 groove forming pressing unit for pressing the edge material into the groove with: - an activation unit 15 kW for re-activating the edge material for groove forming - a pneumatically controlled forming shoe for the underlapping edge - a pneumatically controlled forming shoe for the entire groove - additional post-pressing rollers for the edge areas in the groove - an electro-pneumatic lateral retraction device for the entire pressing unit 1 horizontal adjustment with mechanical digital display 1 trimming unit for 2 motors mounted on the top pressure for trimming the front and rear edge/strip overhang, for trimming cuts flush or with a bevel. 1 milling unit for 2 motors with height sensing, side sensing, for pre-milling from below and above with 2 motors 1kW, 400V, 200Hz, 12,000 RPM, 30° swiveling 1 milling unit for 2 motors with height sensing, side sensing, for fine milling from below and above with 2 motors 660W, 400V, 200Hz, 12,000 RPM, 30° swiveling Note: The technical data and descriptions are copies of the original order

Condition: ready for operation (used), Year of construction: 2015, operating hours: 68,387 h, clamping force: 13,000 kN, screw diameter: 105 mm, injection weight: 4,779 g, total width: 3,650 mm, total height: 2,820 mm, overall weight: 70,000 kg, controller manufacturer: KRAUSS MAFFEI, controller model: MC6 version 1.4, product length (max.): 13,650 mm, Hydraulic injection moulding machine manufactured in 2015. This KraussMaffei 1300-12000 MX features a clamping force of 13,000 kN and platen dimensions of 2210 x 1910 mm. The injection unit has a screw diameter of 105 mm and a shot volume of 5195 cm³. If you are looking to get high-quality injection moulding capabilities, consider the KraussMaffei 1300-12000 MX machine we have for sale. Contact us for further details. Clamping unit • Platen dimensions: 2210 x 1910 mm • Distance between tie bars: 1570 x 1270 mm • Min. mould height: 700 mm • Max. mould height: 1400 mm • Max. opening width: 3050 mmInjection unit • Injection unit: SP 12000 • Shot volume: 5195 cm³ • Max. injection pressure: 2296 barElectrical and hydraulic • Pump motor power: 132 kW • Heating power: 75 kW Bwedpfx Ajz Az Iiemreu • Power supply: 400 V, 3-phase, 50 HzOperating data • Power-on hours: 70003 h 29 min • Production operating hours: 68387 h 27 min • Total cycles: 5,472,772 Additional equipment • KraussMaffei LRX 350 linear robot • Material hopper / feeding equipment • Safety guarding around mould and robot area

Condition: used, Year of construction: 2005, x-travel 2000 (775 + 600) mm y-travel 620 mm z-travel 520 mm Control Heidenhain iTNC 530 turning speed range - main spindle 12.000 min/-1 power capacity - main spindel 18 kW table surface area 1.200 x 600 mm rotary table diameter Ø 500 mm swivellable +15/-95 ° rotatable 0- 360 ° max. table load 1000/350 kg tool taper SK 40 number of toolpositions 30 pos. internal coolant system feed 20 bar rapid traverse ( X / Y / Z ) 30 m/min dimensions 5,0x 2,5 x 3,3 m weight of the machine ca. 11 t Bwjdpfx Aexbh D Demreu CNC-Machiningcenter Universal, 5-Axis and fixed table Machine overhold for 60.000 € - NC-Swivel-Rotary-Table integrated right working area - Fixed-Table left working area - 4th axis on fixed table 165 centre hight - Chip conveyor - internal coolant - filter - 3D probe - Oil dust collector - 2022/2023 overhold for 60.000 € new slideways aspindles in all axis - electric roof - new spindle in 2016 at 20.800 Spindle hours

Year of construction: 1994, operating hours: 3,689 h, condition: used, Schliesing MX 660 Wood chipper on a tandem-axle chassis > Hatz 4L40C diesel engine > Tandem-axle chassis with brakes > 2 infeed rollers > Only 3,689 operating hours > Year of manufacture: 1994 Bwodpfx Amjz Hidyjrju Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. will be happy to assist you. Further information can be found on our website. Errors and prior sale excepted! Road approval = Further information = Please contact Tobias Ebert for more information.

Condition: used, Year of construction: 2014, operating hours: 5,426 h, lifting height: 4,850 mm, fuel type: electric, mast type: triplex, battery manufacturer: GNB, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,200 mm, General information Year of manufacture: 2014 Weights Empty weight: 3.806 kg Battery Battery: 625 Ah, 48 V, Year of manufacture 2014, Brand of battery GNB Functional Lifting capacity: 2.000 kg Maximum passing height: 216 cm Number of valves: 3 CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Mast type: triplex = Additional options and accessories = - 3rd valve - Heater Bwedsz Iabropfx Amrsu = Remarks = = Additional options and accessories = - Pneumatic shaped solids - Roof window = More information = Number of valves: 3 Fork carriage: Sideshifter Please contact Bas Sindorf , ) for more information

Condition: used, OKUMA BLUSHLESS SERVOMOTOR DRIVE UNIT BL-120E-20 Bwsdjy Suw Ujpfx Amrju

Condition: refurbished (used), battery capacity: 465 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,025 mm, total width: 564 mm, Tested traction battery for your forklift - 80V 3PZS 465 DIN A + 1-year warranty + Includes Aquamatic filling system + Includes end discharge resistor & REMA 320 connector (other connector types can be installed on request) + Capacity: min. 90-100% (C5 capacity protocol will be provided upon delivery) + Year of manufacture: 2024 Dimensions: Length: 1.5 mm Width: 564 mm Height: 784 mm Weight: approx. 1280 kg Bwodpfx Amsy Rntaorju Suitable for the following models and others: Linde K - 5231-00 Linde K - 5231-00 - side battery change Linde K 12 Linde K 15 Linde P 120 - 5007-10 - side battery change Linde P 120 - 5007-10 - vertical battery change Linde P 180 - 5007-10 - side battery change Linde P 180 - 5007-10 - vertical battery change Still MX 13 Still R 60-15 Still R 60-16 Still R 60-18 Still R 60-20 Still RX 60-16 Still RX 60-20 Jungheinrich EKX 513 Toyota 7FBMF16 Toyota 7FBMF18 Toyota 8FBMKT20 Toyota FBM16 Crown TSP 6000-A Crown TSP 7000 Doosan BR13R-5 Mitsubishi FBP16 Yale MTC 13 Common battery sizes available, please inquire. Transport can be arranged.

Condition: used, sheet width 2000 mm plate thickness 3,5 mm Bwjdpfxsy Aa Igo Amrju distance between columns 2050 mm daylight opening 355 mm weight of the machine ca. 2,8 t dimensions of the machine ca. 3,5 x 1,5 x 1,5 m Bending machine - Bending angle preselection via limit switches

Condition: excellent (used), TECHNICAL SPECIFICATIONS Capacity Diameter of 4-jaw independent chuck: 2,000 mm Maximum turning diameter: 2,200 mm Maximum turning height: 1,200 mm Distance from RAM to table: 0-1,500 mm Cross slide travel: 1,200 mm Speeds (3 ranges): 2-160 rpm Maximum workpiece weight: 12 tons Main motor: 60 kW C-axis with independent motor RIGHT SLIDE Vertical travel: 1,200 mm RAM dimensions: 250x250 mm Motorized tools ISO 50 Tool changer and turret with 20 positions (8 turning turrets and 12 milling tools) Internal coolant for motorized tools and turning tools LEFT SLIDE Vertical travel: 1,200 mm RAM dimensions: 240x230 mm Turning and Grinding Optional grinding head Internal coolant for turning tools Rapid traverse: 8,000 mm/min Bwjdpfjrp Emaex Amrsu EQUIPMENT Tool changer and turret with 20 positions, with capacity for 8 turning turrets and 12 milling tools 8 turning turrets included Paper filter NOTES Year of rebuild: 2008 Siemens motors; Simodrive 611 controllers

Condition: used, first registration: 10/2004, color: other, Year of construction: 2004, Empty weight: 3.800 kg Bwjdju Sq Inspfx Amrju Axle 1: left 8 mm right 8 mm Axle 2: left 6 mm right 6 mm Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers!

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 9,039 h, load capacity: 1,700 kg, lifting height: 7,100 mm, free lift: 2,340 mm, fuel type: electric, mast type: triplex, construction height: 2,900 mm, fork length: 1,150 mm, drive type: Elektro, Reach truck Load center: 600 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Electromechanical Condition: Ready for operation and fully functional Technical condition: very good Front tire type: Vulkollan Rear tire type: Vulkollan Battery voltage: 48V Battery Ah: 620Ah Battery manufacturer: Stuba Battery type: PzS Battery year of manufacture: 2024 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment is workshop and FEM4.004 certified. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. Of course, we also purchase your used equipment, even if you do not buy a vehicle from us. Lease purchase and financing at favorable conditions are available upon request. We will gladly provide you with competent and detailed advice on our vehicles. Side shifter, Bodpfx Amozvr Ntorjwu 3rd valve, full free lift, safety light, non-marking tires, joystick, single pedal, 3-wheel, seat.

Condition: used, Year of construction: 1965, Technical details: sheet width: 1200 mm plate thickness: 1,0 mm throat of pillar: 1200 mm number of cutting strokes max.: 45 p.Min. throat max.: 300 mm cutting gap adjustment: nein down holder: 5 Stück back gauge: ca. 500 manuell mm total power requirement: 2,2 kW weight of the machine ca.: 1,6 t Bwjdpfx Ameu Icppsrsu dimension machine xH: 1,6 x 1,6 x 1,9 m further features: -with shear angle adjustment -operation via foot switch -voltage 380 V *

Condition: like new (used), Year of construction: 2020, functionality: fully functional, STALAM RF 20 KW ID.NO. 2795 Stalam mod RF 20 KW microwave oven for frozen meat/fish products. Thaws the product effectively from the core outwards in a few minutes. Year mod 2020 the machine is in like new condition! Band width 140 cm. It is also possible to fry products such as bacon etc. with the machine. Dimensions 570 x 200 cm Height 340 cm. Bjdpfxsucv Huj Amrewu