Used Lignuma Mmm-700 for sale (5,926)

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Nwjdpfx Ahoua Tbweksk Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: good (used), Year of construction: 2017, 1 used machining center Brand DMG Type Milltap 700 Year of manufacture 2017 Serial number A00007 with interchangeable pallet and robot automation Control system: Siemens 840D SL Travel paths: X 700 mm Y 420 mm Z 380 mm Table size 840 x 420 mm Spindle Speed: 10,000 rpm Tool holder: DIN30 25-position tool changer Dimensions and weight Dimensions: 2,500 mm x 1,650 mm x 2,950 mm Weight: approx. 3,400 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and included accessories: Tool changer Chip conveyor Internal tool cooling with high-pressure system 40 bar Preparation 4-axis Oil and emulsion separator Air blown through spindle center Nano package Renishaw measuring kit Nsdov T Rtiopfx Ahkswk WH 3 workpiece loading and unloading system with 6-axis Fanuc robot PGN 50 special gripper unit

Year of construction: 1999, operating hours: 8,595 h, condition: ready for operation (used), Machine tool manufactured in 1999. This STAHLI FLP 700 features a copper plate with a diameter of 700 mm. If you are looking to get high-quality machining capabilities, consider the STAHLI FLP 700 machine we have for sale. Contact us for further details. • Copper plate • Diameter: 700 mm Nwsdpfx Aoy R Tx Uohksk • Voltage: 380 V • Power: 2.5 kW

Condition: excellent (used), Mahr Here we offer you a Helio-Pan II. Max. workpiece weight 30 kg at a center height of 100 mm 80 kg at a center height of 150 mm Measuring range, length: 0 mm to 700 mm Measuring range, outer diameter: 0 mm to 120 mm Max. measurable throw: 100 mm Center height: 100 mm Measuring blades/probe and caliper: 1 mm x 5 mm Dimensions (W x D x H) Machine: 2060 mm x 920 mm x 1750 mm Controller box: 600 mm x 800 mm x 2200 mm Weight: approx. 900 kg Electrical power: 230 V / 1200 W / 50 Hz Nwedpfx Ahjzd R U Dskek Air pressure: 6 bar Type: Helio-Pan II 700 Scope of delivery: (See image) We will gladly answer any further questions you may have over the phone. Written orders can be placed via email or fax.

Condition: used, Year of construction: 1984, x-travel 410 mm y-travel 310 mm z-travel 400 mm table-size 700 x 280 mm control Heidenhain TNC 145 tool adaptor SK40 turning speed range 40- 2.000 U/min rapid speed 1,5 m/min feed speeds 1500 mm/min power requirement 2.2 kW quill stroke 63 mm weight 1,3 t total power requirement 2,2 kW weight of the machine ca. 1,5 t dimensions 1,4 x 2,1 x 2,0 m Features: Nwedpfx Aexlufpshkok - New TFT screen - Coolant system - Hydraulic tool clamping - Milling head with spindle sleeve - Documentation

Condition: used, functionality: fully functional, Year of construction: 2015, load capacity: 25,000 kg, total length: 860 mm, construction width: 810 mm, Crane arm Nsdpfx Ahju Dzcmokjwk Condition: Ready for use and fully functional Technical condition: very good Description: In addition to this Kalmar model, we have approx. 200 heavy-duty forklift trucks, compact forklift trucks, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always feasible for us. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail on this P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2440x1360x2060 mm Weight 3000 kg Nedjv A Hf Hopfx Ahkswk Total power requirement 42 kw

Condition: new, Year of construction: 2025, warranty duration: 36 months, New machine 3-year warranty including delivery* & instruction in your bakery * Ground-level installation and sufficient door widths required Advantages: + unbeatable price-performance ratio + modern, volumetric dough dividing machine (gentle on dough, without vacuum!) + particularly suitable for soft wheat-rye mixed dough + extended weight range possible with double piece output (100 - 1400 g piece weight) + revolutionary dough dividing system requires minimal cleaning effort + no dough residue in the drum at the end of the production cycle + dividing the dough without unnecessary stress and compression of the dough + high precision of the dough weights at the same time + pressure lubrication with oil circulation and filtration, very low oil consumption + easier filling of the dough hopper due to low height + height-adjustable conveyor belt can be selected + ejection onto table or other machines (rounder, etc.) possible STANDARD equipment: Njdpswyu Uvsfx Ahkewk + weighing chamber made of stainless steel + robust Construction: steel frame, stainless steel housing + Double piece function (only for model with 1 piston) + Touchscreen control with self-cleaning program >> Setting the hourly output / piece counter / piece weight >> Programming and naming of recipes >> Reading the production statistics + Electronic speed setting + Electronic weight setting + Electronic piece counter + Teflon-coated stainless steel funnel (conical or square depending on size), + 40 kg dough capacity with safety grid in accordance with CE >> Other funnel sizes available for a small additional charge (80 / 120 / 160 / 200 / 300 kg dough) + Separately driven and height-adjustable output belt + Adjustable flour sprinkler, prevents dough pieces from sticking to the output belt + Scraper on the dough output belt Technical data: Capacity: 900 - 2500 pieces per hour (depending on dough) Unit weight: 70 - 1400 grams (depending on dough) Piston: 1 dough part piston (diameter 70 mm), 1-row dough output Power: 2.45 kW Connection values: 400V - 3Ph- 50Hz Fuse: 16A-CEE plug Dimensions of machine in working position: 1120-1136 x 626 x 1501 mm (WxDxH) Dimensions of machine in resting position: 1052 x 626 x 1501 cm (WxDxH) Input height with 40 kg hopper: 1501 mm Net weight: 410 kg SPECIAL accessories, prices on request: - Stainless steel drag for pre-wrapping - Frequency converter for continuously adjustable speed of the dough output belt - Take-off roller on chamber output - Short rounding bar - Higher ground clearance 10/15/20 cm - Additional power connection for connection to work table / rounding beam etc. >> 400 V high current / 3 Ph >> 230 V light current / 1 Ph or 3 Ph

Condition: used, mileage: 8,000 km, first registration: 10/1987, fuel type: diesel, overall weight: 6,500 kg, color: orange, gearing type: semi-automatic, number of seats: 1, Year of construction: 1987, Equipment: all wheel drive, trailer coupling, MB trac 700 K, dual-purpose (road and rail) Excellent condition Company-owned vehicle Torque converter Wagon braking system, 300 tons UVV inspection valid until 07/2012 Nodpei R Ahbjfx Ahkjwk Approximately 1780 operating hours.

Condition: used, HEIGHT OF CENTERS 700 LENGTH BETWEEN CENTERS 12000 TURNING DIAMETER ON THE BENCH 1400 MM TURNING DIAMETER ON THE SOCKET 1760 MM TURNING DIAMETER ON THE CARRIAGE 960 MM BENCH WIDTH 700 MM NR SPEED 27 SPINDLE SPEED 3 - 750 RPM SPINDLE HOLE 200 MM TAILSTOCK QUILL DIAMETER 120 MM TAILSTOCK CONE ATTACHMENT 6 CM TAILSTOCK TRAVEL 380 MM RAPID ON THE CARRIAGE CHUCK DIAM. 500 MM Nsdpfxsrzt Eks Ahkewk NR 01 FIXED REST NR 01 STEADY REST

Condition: good (used), Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping devices, clamping supports, clamping tool, clamping box, clamping tower Nodpfx Ahocn Ibgekswk -Clamping block: for workpiece clamping -Width: 700 mm -Length: 107 mm -Height: 440 mm -Threaded holes: M24 -Bores diameter: mm -Number: 2x milling support available -Price: per piece -Weight: 235 kg/piece

Year of construction: 2024, condition: new, ~ SPEED 700 , SEMI AUTOMATED ~ APPLICATIONS Production of: - paving - kurbs - concrete blocks for: -masonry -foundation blocks -posts, floor slabs -chimneys, -gutters -roadway gutter covers. ADVANTEGES : - Vigorous vibration coupled with hydraulic pressing of the concrete guarantees high quality concrete products. - Vibrators mounted on the counter mold play an important role in concrete compaction. - Chrome-plated pipe guide columns - Teflon-coated sliding bearings Nodehufyhspfx Ahkowk - Our wide range of molds can provide a diverse production. - Reliable mechanical and hydraulic systems. OPERATE : ~ Mostly manual: -Drawer(back/ fort -Mold (up/down) -Counter Mold (up/down) ~ Commands executed automatically: -start/ stop vibration when reaching height -start/ stop pallet feeding exhaust line stop) COMPONENTS: 1.) the press 2.) pallet stacking space 3.) pallet feeding line 4.) concrete bunker 5.) drawer (1) for concrete mold feeding 6.) pallet discharge line with fresh products 7.) hydraulic unit 8.) lever panel for the machine operator TEHNICAL FEATURES: - Pallet dimensions: 700x670x40mm - Active surface: 640x640mm - Minimum/maximum finished product height: 40mm/ 250mm - Vibration frequency: 3000rpm - Hydraulic pump flow: 40 l/min - Cycle time: 60 -100 sec (Semi-automatic version) - Cycle time: 30 – 50 sec (Fully automated version) - Installed power: 15.50 kW - Hydraulic power unit: 7.5 kW - Vibrating table vibrators: 6.00 kW + 0.28 kW - Counter mold vibrators: 0.80 kW - Discharge line: 0.55 kW - Supply voltage: 380V OVERALL DIMENSIONS: Width: 1.60m (without hydraulic unit and control panel) Length: 5.60m Height: 2.85m Machine mass (without mold): 4,000 kg Approx. mold mass: 250 - 300kg ADDITIONAL PRODUCTS / OPTIONAL: 1.) AUTOMATIC OPERATION : ( + 6.300 euro ) - PLC (Mitsubishi Electric) logic programmer + touch display + software for automatic machine operation Reduces the time of a production cycle, higher productivity (30 -50sec) 2.) SECOND DRAWER (2) for finishing layer for paver and kurbs + BUNKER ( + 3.900 euro ) 3.) CONCRETE MINISTATION SEMIAUTOMATED ( + 18.800 euro) Component parts: a.) Sand bunker 2 m2 + Volumetric dosing with conveyor belt + Vibrator b.) Gravel bunker 2 m2 + Volumetric dosing with conveyor belt c.) Electric control panel d.) Concrete Mixer MX 300 ( Fluid concrete: 300 liters Semi-wet concrete: 200 liters, 2.4 cubic meters of semi-wet concrete/hour ) 4.) AUTOMATIC LIFT (elevator) ( + 4.000 euro) 5.) CONVEYOR 6M , for transporting the concrete to the machine bunker ( + 4.000 euro) - Band width: 500mm - 7mm smooth rubber mat with 3 inserts - Motor 1.5kW (380V) PLEASE FOR THE COMPLETE OFFER SEND US AN EMAIL.

Condition: used, Year of construction: 2014, Transnorm conveyor belt GF 4350-700-600 RA2206 Technical data: Conveyor length (NL): 4350 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17 DT80K4/BMG/TH Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics Njdpsq I Ty Uofx Ahkowk

Condition: used, Lippert belt conveyor GF 800-700-600 RA2249 Technical data: Conveyor length (NL): 800 mm Frame width (NB): 700 mm Belt width (GuB): 600 mm Overall height (BH): 105 mm Support feet: optionally available Conveyor speed (v m/s): please contact us Drive: SEW geared motor Electrical data: 50Hz V380-500, kW 0.37 / S1 Idler pulley (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Optionally available: Supports Side guides Frequency converter for stepless speed control Nwodpfsrrk Rpjx Ahkek Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2014, Transnorm conveyor belt GF 750-700-600 RA2226 Technical data: Conveyor length (NL): 750 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17 DRS71M4/MM05 Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Nedpferhkwljx Ahkewk Your specialist and contact for intralogistics

Condition: new, Year of construction: 2020, Transnorm belt curve conveyor left GKF 90°-800-600-IR400 - Exhibit RA2318 Technical data: Frame width (NB): 800 mm Frame width with Bearing cover and motor: 1000 mm belt width (GuB): 600 mm height (BH): 200 mm height with motor (MH): 350 mm Inner radius (IR): 400 mm Conveying angle: 90° degrees Conveying speed (v m/s): 0,38-1,14 m/s Drive: Nord gear Motor with Frequency converter for stepples speed controll Nwedpovadkhsfx Ahkjk Electrical data: 50Hz V380-500, kW 0,37 / S1 Year of construction: 2020 Incl. 2 supports, current height 810mm Optionally available: Support, if deviating from the currently installed Sideguides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstreet 11 B & C, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, Year of construction: 2020, Transnorm belt curve conveyor left GKF 180°-800-700-IR200 - Exhibition machine RA2317 Technical data: Frame width (NB): 800 mm, 2000 mm Diameter Frame width with Bearing cover and motor: 2200 mm Diameter belt width (GuB): 700 mm height (BH): 200 mm height with motor (MH): 350 mm Inner radius (IR): 200 mm Conveying angle: 180° degrees Conveying speed (v m/s): 0,38-1,14 m/s Drive: Nord gear Motor with Frequency converter for stepples speed controll Electrical data: 50Hz V380-500, kW 0,37 / S1 Year of construction: 2020 Njdpfevadknox Ahkowk Incl. support, current height 820mm Optionally available: Supports, if deviating from the current height Sideguides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstreet 11 B & C, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Technical details: floor-plate length: 1100 mm plate width: 700 mm plate height: 85 mm weight of the machine ca.: 430 kg Nwodou N Dyrepfx Ahkok Clamping plate, cast steel with T-slot according to DIN 650 a=25; h=41; b=48;c=24mm; center distance 76mm *

Condition: like new (used), Year of construction: 2023, functionality: fully functional, For sale is a Felder F-700 Z milling machine with 4 spindle speeds. The machine is used as a showroom model at our facility and can be considered as new, with full warranty/guarantee. Technical specifications: Nwjdpjwp Ri Usfx Ahkek - 4 milling speeds - Milling spindle tiltable 90° - 45° - Milling fence for tools up to Ø 230 mm - Multi-adjustment system - Tenoning and slotting table - Motor power 5.5 kW / 7.5 HP, SD start - Year of manufacture: 2023 / as new The machine is located at A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel.: 03137-3109 Related terms: milling cutter, milling machine, milling Reference: R-D1618

Condition: good (used), Year of construction: 1983, travel distance X-axis: 410 mm, travel distance Y-axis: 310 mm, travel distance Z-axis: 400 mm, Control: Positioning and travel control including display HEIDENHAIN TNC 135, 3-axis manual control TECHNICAL DATA Working area X-axis (longitudinal), manual/automatic: 410/390 mm Y-axis (transverse), manual/automatic: 310/290 mm Nwjdpfxjht Hbus Ahkek Z-axis (vertical), manual/automatic: 400/380 mm Arbor stroke, vertical: 63 mm Tilting table clamping surface: 700 x 285 mm Drive power (at 1500 rpm): 2.2 kW Speed range: 45 – 2000 rpm Number of speeds: 12 Step ratio (geometrically stepped): 1.4 Tool holder (DIN 2079): ISO 40 EQUIPMENT/ACCESSORIES  Manual operation and CNC program control  Vertical and horizontal machining  Tilting vertical milling head  Angle-adjustable vertical milling head  Vertical quill feed, manual  Tilting table  Coolant system  Coolant and chip tray  Chip guard in the working area  Mounting elements  Documentation

Condition: excellent (used), Year of construction: 1980, Gurutzpe Super BT lathe 700 x 6000 mm e.p, turning over bed 1380mm, over cross slide 1045mm, over neck 1770mm, neck length before plate 620mm, diameter of the spindle bore 102 mm , speeds 2.8-400rpm, 40cv motor, plate of 4 independent jaws with a diameter of 1200mm, with a fixed steady rest and a mobile one, bed width 800 mm, diameter of the tailstock axis 140mm, max weight on lathes between points 10tns with a steady rest 12tns, estimated weight of the lathe 17600kg, pre-owned lathe electrical panel in very good condition condition Nsdpfx Ahoiqyv Ijkswk

Condition: like new (used), Year of construction: 2016, power: 200 kW (271.92 HP), overall weight: 7,500 kg, MEBOR multi-blade line with two drums, model VC700, manufactured in 2016. In very good working condition! Almost new. The multi-blade line includes: Nedpfoy Sgansx Ahkewk 1. Automatic feed conveyor with automatic positioning rollers. 2. Loading ramp. 3. Unloading table with left/right sorting.

Condition: like new (used), Year of construction: 2026, operating hours: 42 h, functionality: fully functional, overall weight: 6,500 kg, fuel type: diesel, power: 640 kW (870.16 HP), output current: 1,152 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 640 kW (870.16 HP), nominal power (apparent): 1,500 kVA, continuous power (apparent): 800 kVA, total length: 5,500 mm, total width: 1,800 mm, total height: 2,500 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Perkins, type of cooling: water, fuel: diesel, input voltage: 400 V, input frequency: 50 Hz, rotational speed (min.): 1,500 rpm, type of input current: three-phase, We have the following emergency power generators or grid replacement systems from our series production available for sale, with the following technical specifications: Condition: New, 2026 Engine: Doosan DP180LB Rated power: 700 kVA / 560 kW Speed: 1500 rpm Nwodpfjwqai Hjx Ahkek Frequency: 50 Hz Rated voltage: 231/400 V - Includes batteries - Includes diesel tank (1000 L) - Includes circuit breaker 4P ABB XT7S - Includes control system (island operation) - On request, a control system for grid-parallel operation, load distribution, and peak load management can be provided for an additional charge. Seamless integration into your energy infrastructure. Complete unit installed in a sound-insulated, weatherproof container. Dimensions: 600x245x270 cm (L x W x H) Weight: 10,500 kg Warranty: 24 months or 2000 operating hours. The emergency power generator will be delivered in operational condition, including a documented load test of 60 minutes. Delivery, installation, and commissioning are available for an additional charge. Price: €73,000 net.

Year of construction: 2018, operating hours: 3,758 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 5156, GMM rotating head bridge saw with vacuum separator Support travel distance: 3600 mm Support height adjustment: 700 mm Extension of bridge rails Y-axis to 5400 mm Maximum blade diameter: 825 mm for cutting depth approx. 300 mm Saw motor power: 23.5 kW Stepless speed control: 800 - 6000 rpm Tilting table with hydraulic tilt: 3500 mm x 2000 mm Table extension: 3500 mm x 430 mm Saw table with rubber table covering Removable table stops Vacuum lifter for automatic separation of workpieces Nodpfxjy Iu Rae Ahkswk Camera Automatic material measurement Automatic tool measurement Central lubrication Air conditioning GMM software including: - Milling - Drilling - Profiles - MiniCad - Cuts from CAD - Parametric shapes

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, total length: 950 mm, total height: 930 mm, table width: 180 mm, input voltage: 400 V, total width: 560 mm, table length: 700 mm, stroke length: 52 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 50 rpm, Equipment: documentation/manual, Features Equipped as standard with forward and reverse rotation enabling thread cutting Nedpsytpl Uefx Ahkowk Tilting milling head on both sides for angled drilling, bevel milling, etc. Universal application, e.g. milling, drilling, tapping, etc. Large cross table with scale Infinitely variable speed control 2-speed gearbox for optimal power transmission High concentricity thanks to precision bearings Ergonomically designed control panel Digital display of feed and spindle speed Drill chuck B-16 Arbor Table length 700 mm Digital spindle feed display Digital spindle speed display EMC filter according to CE standard Safety guard Service tools Base / stand Technical data Drilling capacity in steel: 25 mm Maximum face mill diameter: 80 mm Maximum end mill diameter: 25 mm Distance between spindle and column: 170 mm Minimum distance between spindle and table: 45 mm Maximum distance between spindle and table: 325 mm Spindle travel: 52 mm Spindle speed range, variable: 50 – 3000 rpm Spindle taper: MT3 Table size: 700 x 180 mm Maximum X-axis travel: 490 mm Maximum Y-axis travel: 160 mm Tilting milling head: -90° / +90° Milling head height adjustment: 275 mm T-slot size: 12 mm Motor power: 1 kW Dimensions (L x W x H): 950 x 560 x 930 mm Weight: 160 kg Delivery to the customer is possible. Delivery cost according to the individual quotation of the transport company. If you are interested in other machines, please visit our website.