Used Knife Balancer for sale (2,286)

Condition: excellent (used), Year of construction: 2016, Ref: 11131 . 2016 Horizon HT-110 Three Knife Trimmer Excellent condition! Only 196,000 books cut! Inline or offline trimmer capable of rates of up to 4,000 books/hour. Features: The trimmer is simple and easy to operate, with all necessary setup performed through the icon-based touchscreen. Gjdpfxjzq D Iqs Angjuh Can run at speeds up to 1,600 cycles per hour. Can also reach production speeds up to 4,000 books per hour by stacking up to 3 books at once. Can be run inline as part of the CABS Perfect Binding System, but it can also be run offline as a standalone trimmer. Specification: Untrimmed Book Size (Spine × Fore-edge) * 148 × 105 mm to 410 × 320 mm Finished Book Size (Spine × Fore-edge) * 145 × 103 mm to 366 × 300 mm Trim Width * Fore-edge: 45 mm * Top-Bottom: 30 mm Trim Height (book thickness/spine thickness) * 2 mm to 100 mm Production Speed 400 to 1,600 cycles/hour

Condition: used, functionality: fully functional, Used Schenck Balancing Machine H 50 V/B with used CAB 690 H measuring unit. (Can be upgraded to a new CAB 920 unit for an additional (18 000–20 000€) The machine comes with original foundation drawings, documentation and manuals. The machine can be test run in Kerava. Rotor Capacity Gjdpfx Asx Ein Ssngsuh - Rotor weight range: 20 – 6 000 kg - Maximum symmetrical load on pedestal bearing: 7 500 kg - Maximum symmetrical load on stand bearing: 3 750 kg - The machine can be loaded freely with lower weights when following recommended procedures. - Maximum rotor length between pedestals:1 600 mm (belt drive) - Maximum diameter over machine base: 2 100 mm - Clamped rotor diameter ranges: 25–180 mm, 180–380 mm - Machine bed length: 3 500 mm - Balancing speed n depends on the rotor’s moment and must be selected to avoid overloading the drive. - Maximum permissible G·n² value: 1400 × 10⁶ kg/min² - Applies to a rigid symmetrical rotor mounted on pedestal bearings. - May be exceeded during dynamic tests on flexible rotors and strength tests. - End drive / FU motor: 7,5 kW - 4-speed gearbox: 120–2520 rpm - Belt drive BU 5 / FU: 7,5 kW - Unbalance Umar 0,5 gmm/kg: 0 gmm/plane

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: RFVD 0018, Used fully fuctional Schenck RoTec Distec Balancing Machine Godpjyxwmlsfx Angjuh The machine comes with original foundation drawings, documentation and manuals. The machine can be test run in Kerava. Technical data: - Max. rotor diameter: 500 mm - Max. rotor height: 150 mm - Max rotor weight: 30 kg (option for 70 kg) - Countinuously variable balancing speed: 600-1000 1/min - Measurement uncertainty: 4 gmm - CAB 870 touchscreen operation - Automatic drilling unit - Weight approx: 2200 kg - Space requirement approx: W1200 x D2700 x H1900 mm

Condition: used, Year of construction: 2001, functionality: unexamined, load capacity: 600 kg, Dalmec MXF Ceiling Balancer-Manipulator Manufacturer: Dalmec lifting systems Model: Dalmec MXF Guodpfxsv Diido Angoh Manufactured: 2001 Lift capacity: 600 Kg Pressure: 0.90 MPa

Year of construction: 2017, condition: excellent (used), functionality: fully functional, machine/vehicle number: CMT 30/STATIC, Non-rotating industrial balancer for grinding wheels, brake discs, fans, rims, etc. Automatic balancer for a wide range of applications. Gjdpfxow Hwlwe Angsuh

Condition: used, functionality: unexamined, grinding length: 330 mm, You buy what you see. Stopped working machine a few years ago. Needs cleaning and maintenance Gusdpfxezk Ewao Angeh

Year of construction: 2024, condition: like new (used), Specifications: Manufacturer: Mettler Toledo Model: XPR4002S Maximum capacity: 4100 g Readability / division: 10 mg / 0.01 g Power supply: 12 V DC, 2.25 A Country of manufacture: Switzerland The XPR4002S is part of Mettler Toledo's XPR Excellence series and is designed for accurate routine weighing in laboratory, quality control, pharmaceutical, and industrial environments. Features include: Large color touchscreen interface High-capacity precision weighing up to 4100 g Readability of 0.01 g Integrated weighing methods and result management Sample ID and Task ID entry Modern Mettler Toledo user interface Robust weighing platform Compact benchtop design Condition: Used, very good condition Tested and fully operational Display and touchscreen functioning correctly Weighing function tested Clean cosmetic condition Gujdpjz E A Iijfx Angoh Included: Mettler Toledo XPR4002S precision balance Weighing platform Power supply / cable as pictured Serial number: C448140625 The balance is available immediately from stock in Belgium. Worldwide shipping can be arranged. Please contact us for additional pictures, a shipping quotation, or a formal offer.

Condition: good (used), Kraus and Reichert Kuris KVS700 Cutting Knife Machine, Fabric Cutter, Textile Machine Guedpfxjpitkge Angoh Item condition: Used and tested for functionality. _RD 6 kg Textile Machines Find more textile machines – new and used – in our shop! International shipping costs available upon request!

Condition: not inspected (used), Year of construction: 1970, Offered here is a balancing machine from the company Trebel. The machine has a solid steel protective hood. For rebuilding, because the control cabinet is missing! Gujdpfx Anohikdwegjh Technical data: Manufacturer: Trebel Type: FC4c-xn Year of manufacture: 1970/74 Normal weight range up to 400kg Max. permissible load per block: 200kg

Condition: refurbished (used), Year of construction: 2014, operating hours: 10 h, functionality: fully functional, machine/vehicle number: SGSHK, compressed air connection: 6 bar, working width: 760 mm, warranty duration: 6 months, operating speed: 1,000 mm/s, Komfi Sagitta 76 with Hot Knife and B1 Stacker Robust and powerful machine suitable for lamination in continuous operation with a standard volume of millions of sheets per year. Designed for time-efficient work: feeding sheets from a pallet including easy placement of the pallet into the machine using laser pointers, elements for quick adjustment of the machine to a new job, air shaft, pneumatic snapping unit or hot knife for reliable separation of a wide range of foils. Also digitally printed job can be easily and conveniently processed on the machine. Well suited and highly applicable for both commercial printing and the packaging industry. Energy saving zone heating system with fastest heat up time. Max. production speed 60 m/min (3600 B1 sheets/h); 50 m/min with hot knife (3000 B1 sheets/h) Max sheet size 760 × 1120 mm (up to 1300 mm) Paper weight 115-600 g/m² Machine dimensions (incl. delivery desk) 4.25 x 1.55 m Basic configuration Feeder: Komfi double action feeding head for reliable feeding even at high speed and small format. Front lay register for precise and constant sheet overlap. Compressor for feeder. Sheet overlap sensor for protection of pressure roller from film sticking in case of a miss-feed. Adjustable separation blowers for reliable separation of sheets from the pile and trouble-free loading of long sheets. Laminating Unit: Powerful pneumatic pressure system to ensure excellent laminating result. Adjustable distance stoppers to enable processing thick substrates and windows lamination. Air shaft for 3″ reel core laminating film. ”On-the-fly” height-adjustable spread roller for perfect smoothing of difficult film before lamination roller. Zone heating of the laminating roller saves energy when laminating small formats. Temperature sensor inside the cylinder for extremely precise regulation. PUR pressure roller for longer roller life. Separator & Delivery: Rotary separation knives for reliable film separation at high speed. Built-in perforator to support trouble-free sheets separation, or to be used for special jobs where knife is not applicable. Pneumatic driven separation roller. Automatic (pneumatic) skew wheel increases reliability of separation when processing wide range of jobs. Good to use for long sheets. Adjustable speed of snapping roller for perfect separation of difficult jobs. Jogging table. SW functions included Stop on the sheet overlap to avoid waste sheets. Zero overlap possibility for processing thick substrates. Automatic pressure and temperature detection to prevent irregularity in lamination quality. End of job function for easy rewind of film. Sensor for sheet separation detection and jam detection. Job settings memory Built-in internet connectivity for service support. Available options Film slitter to cut film to the requested width. Additional On roll perforator. Integrated or External Effect foiling device (OTF). Universal pallet positioning kit enables to load variety of different pallets into the machine. Hot knife option for perfect separation of thick, PET and Nylon films that eliminates flagging. Gedjzdnpxspfx Angouh Antistatic bar removes static charge from the separator to avoid thin sheets wrapping onto the rollers. Windows lamination kit. Set of chilling rollers placed between laminating unit and separator to reach high quality embossing or windows lamination. Automatic sheet stacker (pallet stacking).

Condition: used, This listing is for a Sartorius Cubis MCE10202S-2S00-0 Balance with unit is in full working condition and is ready for immediate release. Experience unparalleled precision and versatility in laboratory measurements with the Sartorius Cubis MCE10202S-2S00-0 Balance, a standout model in the innovative Cubis II series. Key Features: High Capacity and Readability: With a capacity of 10,200 g and a readability of 0.01 g, this balance is ideal for weighing larger samples with utmost accuracy. Exceptional Reproducibility: Achieve consistent results with a reproducibility of ±0.007 g, ensuring reliable data across multiple measurements. Impressive Linearity: Maintains accuracy with a linearity specification of ±0.02 g, making it suitable for critical weighing tasks in demanding environments. Spacious Pan Dimension: The balance features a spacious weighing pan measuring 8.1 in x 8.1 in (206 mm x 206 mm), accommodating a variety of sample sizes comfortably. User-Friendly Display: Equipped with an MCE Touch Screen Back lit display, it offers intuitive navigation with manual level control and a motorized internal calibration feature for convenience. Guodpfoxxzaasx Angjh Additional Information: Modular Weighing System: The Cubis II series allows for individual configuration from various components, enabling users to adapt the balance to specific weighing tasks seamlessly. Versatile Applications: This balance is suitable for a broad range of laboratory applications, including research, quality control, and educational settings, making it a versatile tool for scientists and educators alike. Range of Options: The Cubis II series boasts a selection of premium laboratory balances with maximum loads ranging from 2.1 g to 70 kg and readability options between 0.1 μg to 1 g, providing tailored solutions for different measurement needs.

Condition: excellent (used), Knife grinder ABM model OP2000 with tilting magnet mm 2.000 x 170, grinding wheel motor 10 kW, segments holder, flanges for CBN and diamond wheel, magnetic separator, year 2020 Gedpfx Aszw I Rcengouh

Condition: good (used), Year of construction: 1971, with magnetic table max. grinding length 2500 mm a frequency converter was retrofitted for infinitely variable speed of the grinding motor Gedpfx Aemccvaengsuh also a paper filter was retrofitted for filtering the cooling water

Condition: used, This listing is for a Vibra HTR-220E Balance Gujdpfx Anoxzg Tkjgeh

Condition: excellent (used), Knife grinder Göckel model G50 elT with tilting magnet mm 3100 long Godpfx Anezw Ntljgsuh

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 11311, workpiece weight (max.): 30 kg, type of input current: three-phase, input current: 12 A, input frequency: 50 Hz, input voltage: 400 V, rotor diameter: 1,000 mm, Balancing Machine, vertical shaft. Measurement in two planes. Maximum rotor weight: 30 kg (tooling included). Automatic Indexing (rotor will, after measurement be positioned with correction location at the front). Guedpox H Aa Tefx Angsh Rotor speed can be set for each programmable standard workpiece type. Some tooling is included. Machine is available because fans are no longer built by the customer.

Condition: used, This listing is for the Sartorius Practum6101-1S Toploading Balance The unit is in full working condition and is ready for immediate use The Practum 6101‑1S is a high‑quality top‑loading laboratory balance manufactured by Sartorius (often distributed by Cole‑Parmer). Here’s a breakdown of its key specifications and features: Technical Specifications Maximum Capacity: 6100 g (6.1 kg) Readability: 0.1 g resolution Repeatability: ±0.1 g Linearity: ±0.3 g Stabilization Time: Approximately 1.5 seconds Pan Size: Around 180 mm diameter (7 in) Weigh South Notable Features Touchscreen swipe interface: Intuitive navigation through menus and functions Built-in overload protection: Protects the sensitive weighing cell from excessive loads Supervisor lock: Prevents unintended menu changes or unauthorized adjustments Data interface: Mini‑USB port allows direct communication with PCs or printers, including support for formats like SBI, xBPI, table, or text Multiple weighing applications: General weighing Density determination Percentage weighing Check‑weighing Peak hold Guodpfjxhfcqjx Angeh Counting Handling unstable conditions Build and Design Durable, easy‑to‑clean housing: Includes a draft shield that can be disassembled for cleaning

Condition: used, This listing is for a Sartorius Tare CPA34001S Analytical Balance The unit is in full working condition and is ready for immediate release. This model offers a weighing capacity of up to ~34,000 g (34 kg) with a readability of 0.1 g. It includes an automatic internal calibration (isoCAL) function, allowing the balance to self-calibrate at set intervals to maintain accuracy. The weigh cell is described as “monolithic weigh cell technology” which gives stability, precision and durability. Large weigh pan: e.g., specification documents list a pan size of 400 × 300 mm for this model. Guodoxrt N Hjpfx Angoh The housing is designed to be robust and chemical-resistant for tough lab environments. Interface: it supports RS-232C / V24‐V28 serial interface for data logging, printing, external systems. Fast response time: average response stated < 2 s in one specification sheet. Tare function: full subtractive tare up to 100% of capacity is supported. Technical Specifications (typical) Based on the manual and spec sheet for this model: Capacity (Max): 34,000 g (34 kg) Scale interval (d): 0.1 g Linearity: ±0.2 g (typical) Repeatability (standard deviation): ≤ 0.1 g Pan size: ~400 × 300 mm Dimensions (W × D × H): ~313 × 532 × 120 mm Typical response time: ≤ 2 s Operating ambient temperature with isoCAL: 0 °C to 40 °C; without: +10 °C to +30 °C (from manual) Interface: RS-232C serial, 7-bit, various parity, 150-19200 baud. Applications & Use-Case Given its capacity (34 kg) and readability (0.1 g), this balance is suited for large-capacity analytical weighing rather than ultra-fine micro-weighing. Typical uses could include: Weighing bulk samples, large containers or vessels (e.g., large drums, tanks) where still a good accuracy of 0.1 g is required. Industrial laboratories, QA/QC, production where large items must be weighed with decent precision. Situations where the weighing pan size needs to accommodate large items (400×300 mm is relatively large). Environments where interface to computer/printer is needed for logging and traceability. Where regular internal calibration is a benefit to maintain accuracy over time without frequent manual external weight calibration.

Condition: used, This listing is for the Adam Solent Precision Analytical Balance + Adam ATP Printer The unit is in full working condition and is ready for immediate use The Adam PW124 analytical balance is a reliable, precision instrument tailored for tasks requiring high accuracy—such as chemical analysis, formulation, and quality assurance. It combines ease of use, robust features like internal calibration and GLP-compliant data outputs, and sturdy construction that supports dependable performance in demanding laboratory environments. Key Features Exceptional Precision: Readability of 0.0001 g, repeatability around 0.0002 g, and linearity approximately 0.0002 g Backlit LCD Display: Easily readable under varying lighting conditions, with programmable backlight settings Calibration: Equipped with internal calibration, eliminating the need for external weights Connectivity: Includes an RS‑232 port for interfacing with PCs, printers, or data-loggers; supports GLP-compliant printouts with date and time Capacity Tracker: Visual indicator to help prevent overloading the balance Additional Functions: Offers selectable digital filtering for stability in changing environments, multiple weighing units, and standard lab weighing modes (e.g., check-weighing, parts-counting, percentage weighing, net/total) Security and Durability: Features password protection, a security slot for locks, sealed keypad, and robust metal housing—suitable for long-term lab use GLP Compliance: Capable of generating reports that include crucial data such as time, date, and calibration verification Gedpfx Anoxhfgvjgjuh

Condition: good (used), functionality: fully functional, Manufacturer: HOFMANN Guodpszzlnmofx Angsh Type: NG-1 Machine No.: 922472 Max. disc diameter: 320 mm Max. loading weight: 20 kg

Condition: used, This listing is for the Sartorius Tare ENTRIS2202-1S Balance The unit is in full working condition and is ready for immediate use The Sartorius ENTRIS2202‑1S (also referred to as ENTRIS 2202‑1SUS in some regions) is a precision top-loading laboratory balance designed for reliable, accurate weighing of samples up to approximately 2,200 g with 0.01 g readability. Key Specifications: Capacity: 2,200 g Readability (Resolution): 0.01 g (10 mg) Repeatability: Typically 0.01 g Linearity: Approximately 0.03 g Weighing Pan Size: Around 182 mm × 182 mm (7.1″ × 7.1″) Calibration Type: External calibration (requires separate calibration weight) Display: Backlit, high-contrast screen for clear visibility Interface Options: RS‑232 port for communication with PCs or printers Built-In Functions: Includes modes for basic weighing, counting, percent weighing, animal weighing, and density determination Language Support: Multiple languages supported such as English, French, German, Italian, Polish, Russian, Spanish Other Features: Anti-theft locking capability, easy-to-clean removable pan and draft shield Stabilization Time: Approximately 1.5 seconds Dimensions & Build: Compact size, robust design ideal for lab environments Gujdjxhfffepfx Angeh

Condition: used, Weinig Rondamat 929 knife grinding machine for the manufacture of profiled knives. Production from a straight blank or regrinding of used knives using a template. Technical data: - Maximum grinding wheel diameter: 225 mm Godpfx Anszrx Hqogouh - Maximum tool diameter: 300 mm - Minimum tool diameter: 80 mm - Maximum tool width: 230 mm

Condition: excellent (used), Year of construction: 2016, Ref: 11137 . 2016 Horizon SPF-200L Latest model, high speed, fully automated booklet maker with A4 landscape format capability With additional trimmer for 3 sided cutting! Features: Advanced Automation – All necessary settings for a wide variety of booklet formats can be performed automatically. Gusdpszuth Iofx Angjh Even the fold roller gap adjustment is automated so very quick changeover with minimal test sheets. 10.4’’ large colour touchscreen with icon-based display for easy operation Cost Savings –works with pre-cut 4-page sheets instead of folded signatures to eliminate the folding process. Equipped with: 3 x Horizon VAC-600Ha+m+c towers (18 Bins) PJ-77R Jogger delivery for rear collation off C tower IFU-200 connecting unit SPF 200L Stitcher and folder 2 x 43/6-S Hohner Stitching heads FC 200L Foredge trimmer TBC-200L Top and bottom trimmer Waste paper removing conveyor PK-30 kicker LC-200 delivery Specification: Sheet Size: Max. 356 x 610 mm or 14.000” x 24.000” Min. 120 x 180 mm or 4.725” x 7.090” Sheet Weight Range: Normal Paper: 64 to 157 gsm Art Coated Paper: 84.9 to 157 gsm Stitch Thickness: Top/Side Stitch, Corner Stitch and Fold Max. 4 mmor 0.155” (About 48 sheets of normal paper 64 gsm) Production Speed: Max. 4,000 booklets per hour (A4-Finish, Portrait) Max. 3,500 booklets per hour(A4-Finish, Landscape)

Condition: like new (used), Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2026-078, working width: 1,600 mm, working height: 100 mm, warranty duration: 6 months, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection Gujdpfswgc I Rjx Angjh • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: used, This listing is for a Sartorius 36201S Balance 100G-15000G Guodpfxoxv Svts Angeh The unit is in full working condition and is ready for immediate release. Because of the large capacity (36 kg) but still good readability (0.1 g), this balance is need to be weighed, yet you still need granularity at the 0.1 g level. Examples: bulk materials in labs, industrial weighing in R&D, weighing heavy vessels/totes, formulation where fairly fine resolution is required. Not suitable for ultra-micro weighing (µg or mg) — it’s not an “analytical balance” in that sense, but rather a high‐capacity precision/industrial balance Maximum weighing capacity: 36,200 g (i.e., 36.2 kg) according to the data sheet for model “36201S”. Readability (i.e., smallest displayed increment): 0.1 g (100 mg). Weighing pan size: 400 mm × 300 mm (width × depth) for the high-capacity models. Repeatability (typical deviation) < ±100 mg for this model. Linearity deviation < ±200 mg. Off-centre loading (eccentricity) specification: 300 mg at test load of 10,000 g. According to one listing the version “MCE36201S0-S00” is described as 36.2 kg capacity, 0.1 g readability, external calibration. According to another listing: “Maximum capacity 36200g – Readability 100mg – Weighing surface 400×300mm – Stainless steel” for version MCA36201S-2S00-O. Minimum weight (optimal) is noted as ~82 g (under USP 41 guidance: “820 d” rule) for this model class