Used Knife Balancer for sale (2,345)

Condition: used, Year of construction: 1971, Technical details: grinding length: 700 mm workpiece height: 80 mm Table dimensions: 105 x 725 mm feed range: mechanisch total power requirement: 0,8 kW dimension machine xH: 0,7 x 1,3 x 1,4 m Application: Grinding of linear surfaces for shearing knives and div. tools. Grinding support: -Vertical adjustment travel 45mm hand crank. -speed 2840 rpm -rotate 20° right/left -swivel 40° back and forth table: -with stop bar 730mm -equipped with 2x clamps / 2x fences Ndjdeu Ngk Tjpfx Ab Aoc -grinding depth by manual adjustment 80mm -mechanical feed, adjustment travel approx. 0.3 mm/double stroke -swivel 5° - 25° via hand toggle -1x chucking groove centered accessories: Box with div. grinding wheels *

Condition: used, Year of construction: 1969, Technical details: sheet width: 2000 mm plate thickness: 1,5 mm distance between columns: 2100 mm table-size: 2150 x 450 mm height over floor: 850 mm knife length: 2100 mm down holder: ja mm back gauge: 460 manuell mm strokes per minute: ca. 50 Hübe/min cutting gap adjustment: ja cutting angle: nein total power requirement: ca. 5,5 kW weight of the machine ca.: ca. 3,0 t transport measurements machine: 2,7 x 1,6 x 1,8 m Further features: - incl. Table extension (L: 1750 x W: 1000 mm) and adjustable limit stop Ndodpfx Aeu Icp Aob Ajc - back gauge with linear scale, operation with hand crank i.D. *

Condition: used, Technical details: Ndsdpfx Aeu Icqaeb Ajc sheet width - max.: 200 mm plate thickness: 10 mm Knife length: 175 mm round: Ø 20 mm square: 18 mm height over floor: 900 mm machine weight ab.: 200 kg dimension machine xH: 0,73 x 0,66 x 2,3 m dimensions L x W x H: Untergestell/Tisch: 0,73 x 0,66 x 0,60 m MECHANICAL HAND LEVER SHEARS Steel construction welded with angle - with base frame -Hand lever length = 1,300mm, with safety lock *

Condition: used, Year of construction: 1995, Technical details: sheet width: 3000 mm plate thickness: 12 mm distance between columns: 3500 mm control: Cybelec DNC 10 G Ndodpfx Ajvc Amtsb Asc back gauge: 1200 motorisch mm cutting angle: 1,2 - 2,73 ° cutting gap adjustment: ja mm cutting capacity : 66.000 daN daN Knife length: 3100 mm down holder: 17 Stück interface: RS232 Table dimensions: 3200 x 600 mm total connected load: 22 kW weight of the machine ca.: 11,0 + (1,0 to Anbauteile+Zubehör) t space requirements approx. LxWxH: ca. 4,5 x 2,6 x 2,1 m transport dimensions LxWxH: ca. 5,0 x 2,25 x 2,2 m The guillotine shear was put into operation for the first time in 1998. The DNC 10 G control unit was specially designed for guillotine shears. It has a numerical axis for controlling the backgauge and automatically calculates and regulates the cutting gap, the cutting angle and the cutting depth, taking into account the material to be cut. (Data from the manufacturer) Table with side stopL:930 x W:105 x H:42 mm 2 table extensions L:1600 x W:100 x 83 mm Angle fence (attached to table extension) Operation via control panel with swivel arm and foot control Equipment: Drain with rollers for clippings 2x protective grid *

Condition: excellent (used), functionality: fully functional, overall weight: 1,400 kg, Olma precision thickness planer, 630 mm, 4-knife cutterhead, electric thickness table adjustment. Ndedez Hzv Iopfx Ab Asc

Condition: used, Year of construction: 2021, Flatbed Cutter Elitron TH 31.20 for Sale. Year of Manufacture: 2021 Two-carriage configuration for increased productivity. Specifications: - Working area: 3150 x 2050 mm - Working speed up to 102 m/min - Two independent cutting heads for materials up to 50 mm thick - Working area divided into 40 individual vacuum sectors - High-efficiency 11 kW vacuum pump integrated into the machine frame - Monolithic frame - Axes driven by linear roller bearings and precision rack-and-pinion system Configuration includes: - One electric oscillating knife module - One pneumatic oscillating knife module - Two tangential modules - Two creasing modules - One 3kW milling module (60,000 rpm) - Two laser pointers - Two marking tools Nedpjw Duchefx Ab Asdc - External dust extractor for milling (3.45 kW) - Seeker System PRO - Video projection system onto the worktable - Twin-Cut software for optimizing the workload of both cutting heads to maximize performance and output The Elitron flatbed cutter is installed in our demo showroom. Inspection and testing are welcome. Installation and training services can be provided for an additional fee.

Condition: ready for operation (used), machine/vehicle number: 3083, Paper folding machine Nodpfsz Suqkex Ab Asdc Enimmäisnopeus Jopa 24 000 – 30 000 arkkia tunnissa Arkkikoko (Max) 520 x 850 mm (tai 520 x 740 mm versiosta riippuen) Arkkikoko (Min) 120 x 135 mm Minimitaite 65 mm Alirakenteet 4 taskua (buckle plates) + 1 ristiveitsi (cross knife) Koneenpinnoilla näkyvissä käytön jälkiä sekä tuotantotilojen kostutuslaitteiden jälkiä Syöttölaite Imurullalla ja erottelupäällä varustettu Flatpile feeder

Year of construction: 2021, condition: refurbished (used), Spindle motor, completely overhauled for JUNG HF50 / JF520. Nedpfx Abehcn Spo Aedc Electrically overhauled / new bearings installed and balanced. Exchange delivery possible, depending on availability.

Condition: used, Year of construction: 2021, operating hours: 198 h, Equipment: all wheel drive, Komatsu WA 70M-8E0 Wheel Loader | Year of Manufacture 2021 | Only 198 Operating Hours | Top Condition Vehicle Data: * Manufacturer: Komatsu * Model/Type: WA 70M-8E0 * Category: Wheel Loader * Year of Manufacture: 2021 * Operating Hours: 198 hrs * Power: 46.2 kW (approx. 63 hp) * Color: Yellow * Permissible Total Weight: 6,000 kg * Axles: 2 * Tires: 15.5/60-18 (Tread Depth: Axle 1: 50%, Axle 2: 50%) Equipment & Highlights: * Attachments included: Pallet forks + Original Komatsu bucket (Type: 42U-70-40110) with 0.85 m³ capacity Ndedpfxs Aa Eq As Ab Asc * Comfort & Cabin: Integrated radio with USB connection for comfortable operation * Tire Condition: Approximately 50% tread remaining all around (Size 15.5/60-18) * Special Features: Emissions class "Low Noise" - ideal for use in urban or noise-sensitive areas. ----For sale is an absolutely new and well-maintained Komatsu WA 70M-8E0 wheel loader from the year 2021 with extremely low operating hours of only 198! The machine is in excellent optical and technical condition and is ready for immediate use for your next project. With a permissible total weight of 6,000 kg and a powerful 46.2 kW engine, the wheel loader offers the perfect balance between compactness and strong lifting power. The machine can be inspected and tested on our premises after prior arrangement. We look forward to your contact if you have any questions or are interested!----New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transfer of your purchased vehicles within Germany. Contact us!----We speak the following languages: German, English and Russian!----No liability for printing and typesetting errors, changes, prior sales and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the processing and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A large variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and seriousness. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transports We will gladly assist you in organizing special transports. Day licenses / export license plates We will gladly assist you in obtaining export license plates/short-term license plates. Handling of customs formalities We will gladly assist you in handling customs matters.

Condition: good (used), Perfecta 168 TS paper guillotine The machine is in very good condition and ready for production. Year of manufacture: 2010. Available immediately from stock. The guillotine can be used as a standalone unit or integrated into cutting systems. Program creation is handled via the menu and covers a wide range of cutting tasks, such as single cuts, custom programming, multiple cuts, clamping without cutting, and automatic transfer of actual values. Perfecta premium-class paper cutters are manufactured in Bautzen, Germany. Distinguishing features of Perfecta machines: – Interactive user interface – 18.4” touchscreen – USB interface – Ethernet interface – Windows CE operating system – CIP data module – Positioning via an electronic handwheel – Optimized cutting cycle – Programmable clamp pressure – Automatic adjustment of clamp pressure based on cutting width – Automated front-access knife change – Quick-change knife system – New, single-piece cast machine frame for increased stability – Maintenance-free electromagnetic clutch Technical specifications: Cutting length: 1680 mm Maximum pile height: 165 mm Insertion depth: 1680 mm Minimum cut with false clamp plate: 77 mm Minimum cut without false clamp plate: 26 mm Maximum backgauge speed: 300 mm/s Backgauge guidance: above the work table Ndodez S Uy Ejpfx Ab Aec Main motor power: 7.5 kW Net weight: 6900 kg The machine comes equipped with a spare knife, a paper jogger, a false clamp plate, documentation, and a set of tools.

Condition: used, Year of construction: 1982, center height: 125 mm, grinding length: 650 mm, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Working area Grinding diameter: 250 mm Grinding length: 650 mm Center height: 125 mm Distance between centers: 650 mm Grinding length in plunge grinding: 80 (100) mm Grinding depth in internal grinding: max. approx. 170 mm Grindable bore: max. 90 mm Workpiece weight: max. 80 kg Distance between workpiece spindle and tailstock center: 960 mm Spindles Internal grinding spindle speed: 9,500–50,000 rpm Grinding wheel diameter: max. 400 mm Spindle bore: 30 mm Workpiece tailstock can be swivelled: 90° Feed and table movement Workpiece table speed: 50–10,000 mm/min Feed rate: 240 mm/min Cooling Coolant consumption: 36 l/min Drive and power Spindle motor drive power: 6.25 kW Connected power: approx. 10 kW Total power consumption: 8.5 kW Machine data Machine weight: approx. 3.4 t Space required: approx. 3.9 × 2.5 × 1.85 m Control and drive Control: Studer Drive: electric / hydraulic Speed control: stepless EQUIPMENT Tailstock with fine adjustment and hydraulic retraction Workpiece tailstock with increased accuracy Table air lift Ndeds Aa Ai Ajpfx Ab Asc Hydraulically foldable dressing device Radius dressing device Hydro-cyclone filter Automatic grinding wheel balancing device Automatic dressing cycle with speed compensation Internal grinding device

Condition: used, Year of construction: 1961, workpiece weight 300 kg workpiece length 1200 mm diameter 1300 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Nsdpfsy Swhvjx Ab Asdc Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: as good as new (ex-display), Intake opening: 2000 x 1900 mm Motor power: 2 x 75 kW Rotor flight circle: Ø 600 mm Rotor speed: approx. 84 rpm Cutting system: 152 cutting inserts 40x40x20 mm on toolholders Screen perforation: with this Screen perforation is for achieving the security levels P2 to P5 Counter knife: with cutting gap adjustment Machine weight: approx. 21.000 kg Ndjdpfxocb Dtte Ab Ajc Machine number: A 32

Condition: used, Year of construction: 2020, machine/vehicle number: INC36, Used Apsol case packer - year 2020Technical Specifications & Performance DataThis Apsol Case Packer is a robust secondary packaging solution engineered ( including former, inserter, and sealer) for continuous-duty industrial packaging and beverage production environments. Built in 2020, it combines reliability with efficient throughput for used bottling line upgrades and second hand packaging machinery projects. Each format has its own pick-up head, specific to the product. For the formats used the configuration was: 6x2.Manufacturer: ApsolMachine type: Automatic Case PackerYear of construction: 2020Production capacity: 7–9 boxes per minuteRated voltage: 400 V ACFrequency: 50 HzPower: 26.5 kWFull load current: 49 AElectrical phases: 3ph + N + GNDShort-circuit rating: 10 kAProtection rating: IP54Compliance: CE markedAdvanced Automation & Control SystemsEngineered for dependable, automated case handling, this case packer supports stable, repeatable performance with CE-compliant electrical architecture. The machine’s power and control specifications (400 V, 50 Hz, three-phase) align with standard industrial automation environments, facilitating straightforward connection to existing line controls and supervisory systems. Safety-rated circuits and integrated protections support safe operation and ease of maintenance within modern packaging lines.Production Line Integration CapabilitiesDesigned for flexible line layouts, the Apsol Case Packer integrates upstream with fillers, labelers, and conveyors and downstream with case sealers, printers, and palletizers. It is suitable for beverage production and industrial packaging scenarios where bottles, cans, or jars are collated and loaded into cartons or cases. Its balanced throughput of 7–9 boxes per minute helps harmonize line speeds without creating bottlenecks.Machine Condition & Maintenance HistoryManufactured in 2020, this second hand machine is offered in working condition and ready for operation. The electrical specifications confirm contemporary design standards, supporting efficient recommissioning within a used bottling line or as a standalone case packing asset.Operational Performance & VersatilityThe machine’s performance profile is well-suited for beverage packaging applications, including the collation and loading of PET or glass bottles and aluminum cans into cases, as well as general industrial packaging tasks. With its steady output range, it fits small to mid-speed lines seeking reliable case packing with consistent pack quality and minimal downtime.Installation Requirements & Site PreparationInstallation requires a three-phase 400 V, 50 Hz electrical supply with sufficient capacity for the 26.5 kW load and 49 A full-load current. Plan for appropriate floor space to accommodate infeed and outfeed conveyors and to allow safe operator access for changeovers and routine service. The IP54 protection rating supports installation in typical product... Ndsdpfx Abo Adt Nns Aoc

Condition: new, Multi-function machine with aluminum sliding table for sawing, milling, planing/thicknessing, and optional long-hole drilling. torsion-resistant, steel-cast iron construction machine table made of cast iron, hardened and ground smooth-running, anodized aluminum sliding table, 10-year SCM warranty on wear of the slide guides large fence system with extendable aluminum telescopic stop and folding stops with combination saw-tenon stop with 45° quick adjustment max. saw blade diameter 315 mm with optional scoring unit, swiveling from 90°-45° helical steel infeed roller for consistent wood feed during thicknessing four milling speeds, manually adjustable standard with right/left rotation of the milling spindle three independent motors for each working unit sliding table with ball contact system equipped with a ball contact system that has proven its worth millions of times permanently smooth running due to hardened and ground guides not susceptible to dust and dirt due to minimal contact point between the ball and trapezoidal rail The dust extraction ports for the planer and thicknesser are on the same – right – side. The dust extraction hose can therefore be used for both types of planers from the same side. Nsdpjiiyppofx Ab Aodc helical steel infeed rollers for a constant and even workpiece feed massive anti-recoil guards for the operator's safety 3-knife cutterhead ensures an optimal planing result Fencing length 1600 mm max. saw blade diameter with scoring unit 315 mm max. cutting height at 90° / 45° 100/79 mm max. crosscut width to the left of the saw blade 1660 mm cutting width on the parallel stop 800 mm saw blade speed 3500 rpm saw blade tilt 90° - 45° Working width 300 mm planer table length 1260 mm planer shaft diameter / number of planing knives 72 mm / 3 pcs. Table dimensions 300 x 450 mm min. / max. working height 3 mm / 220 mm max. chip removal 4 mm feed rate 7 m/min Milling spindle diameter 30 mm Useful length of milling spindle 100 mm max. tool diameter 180 mm, can be countersunk Spindle speed 3500/600/800 rpm Motor power 3 x 4 kW, 400 V, 50 Hz Dust extraction port diameter 4 x 120 mm Dust extraction port diameter saw blade guard 60 mm Weight 430 kg OPTIONS: - Professional stops EUR 300.— Saw stop with quick-release lock and micrometric adjustment Planer stop with 90° ÷ 45° with continuous adjustment - Scoring unit incl. saw blade EUR 292.— - Handwheel with numerical display for thickness table positioning EUR 129.— - Feed device EUR 119.— - 2 additional handwheels for unit adjustment EUR 45.— - TERSA cutterhead DM 72 mm EUR 212.— - Xylent spiral cutterhead with 3 rows of knives EUR 717.— - Aluminum long-hole drilling device EUR 390.— - 2 stop flaps on the crosscut fence EUR 150.—

Condition: used, Year of construction: 2016, Used Horizon StitchLiner 6000 Saddle-Stitching System The Horizon StitchLiner 6000 is a powerful all-in-one solution for booklet production. It combines collating, scoring, folding, stitching, and three-side trimming in a single, efficient process. With its user-friendly operation, high productivity, and versatility, this system offers numerous advantages for print shops, binderies, and on-demand printing. This StitchLiner 6000 consists of the following components: - 2x VAC-80Sm Collating Towers - 1x VAC-80Sa Collating Tower - ACF-30 Accumulating and Folding Unit - SPF-30 Saddle-Stitcher - HTS-30 Three-Knife Trimmer Key Features: - 24 stations (3 x 8 stations) - Inline production from collating to finished product - Variable data processing: The system can handle personalized prints and variable page numbers, making it ideal for digital printing - Fully automatic format adjustment for quick job changes - Touchscreen for user-friendly operation, even for less experienced operators Technical Specifications: - Sheet sizes: Max. 350 x 500 mm, Min. 120 x 210 mm - Paper weight: 64-300 g/m² - Processing thickness: Up to 5 mm (approx. 50 sheets of 80 g/m²) - Production speed: Up to 6,000 booklets/hour - Stitch spacing: 60-150 mm - Trimming (untrimmed): Max. 350 x 250 mm, Min. 120 x 85 mm - Trimming (trimmed): Max. 340 x 240 mm, Min. 85 x 75 mm - Power supply: 200-240V, 50/60Hz - Compressed air: 5 bar, 230 l/min - Floor space: Approx. 7,320 x 2,550 mm (without delivery) - Total weight: Approx. 2,300 kg Ndodpfez Szb Njx Ab Ajc All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, TREIF FOX-CE /F | Automatic slicer / Meat and cold cut portioning machine Manufacturer: TREIF Maschinenbau GmbH Model / Type: FOX-CE /F (Type: 3421) Serial number: 342106.61569.0558 Year of manufacture: 2000 Power supply: 400 V / 230 V, 50 Hz, 3N~, 6.2A, protection: 10 A Power: 2.60 kW Net weight: 204 kg Overall dimensions of the machine: 2000x600x1400mm Cutting capacity: up to 180 cuts/min Slice thickness adjustment: Continuous adjustment in the range of 0.5 – 25 mm Njdoz S N Ukepfx Ab Asdc The Treif FOX-CE /F is a well-established industrial slicer and portioning machine, designed for the precise portioning of fresh, chilled, and lightly frozen raw materials (up to -4°C) with or without bones. The machine is widely used in meat processing plants, butcher shops, supermarkets in the cutting departments, as well as in catering companies and food processing plants. The machine is characterized by a dynamic and repeatable cutting process thanks to the rotating knife system and the hydraulic drive of the feed of the pressure plate. The considerable length of the loading chamber enables the processing of long pieces (e.g., loin, neck, bacon, cold cuts), which translates into high work efficiency and minimized loading downtime. The continuous slice thickness adjustment system, located directly on the front control panel, allows the operator to quickly adjust the parameters to the current production needs.

Condition: used, total width: 800 mm, total length: 2,200 mm, total height: 1,500 mm, Colour: Green Empty weight: 1.000 kg Knife bench, knife sharpening machine grinder Model: Conventional Manufacturer: Erma Fulda Type: ASM-8/4 Series: 045371 Travel: 1200mm Table: 800x150mm Motor: 1.85kW Max. Spindle speed: 2730 rpm Grinding diameter: 165mm Machine-size: 2000x800x1550mm Machine-weight: 500kg - Documentation available: No - CE certificate present: No - Serial number: 045371 - Drive system: Conventional - Power [kW]: 1.9 - Number of axes [pcs]: 1 - X-axis travel [mm]: 1200 - Table width [mm]: 800 - Table depth [mm]: 150 - Max. grinding wheel diameter [mm]: 165 - Max. spindle speed [rpm]: 2730 - Options: Knife Sharpener, Tiltable magnet - Transport dimensions: 2200mm x 800mm x 1500mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Nsdoz Ain Tepfx Ab Aedc Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2009, operating hours: 7,515 h, GUIDETTI SINCRO 950 – Cable Granulator, 37 kW Main Motor, Dry Separation Table, and SIMCO Anti-Static System We offer a used GUIDETTI SINCRO 950 cable recycling machine designed to recover copper through granulation and dry separation of metal from cable insulation. The process combines cable granulation in a knife mill with separation on a vibrating dry separation table. The machine is suitable for cable recycling facilities and non-ferrous metal processing companies. Technical specifications: Manufacturer: GUIDETTI Recycling Systems – Italy. Model: SINCRO 950. Year of manufacture: 2009. Serial number: 9501000025. Machine weight: 3,000 kg. Supply voltage: 400 V. Frequency: 50 Hz. Electrical supply configuration: 3P + PE. Full-load current: 120 A. Marking: CE. Separation method: dry separation on a vibrating table. Ndsdpfx Abs Abwuvo Asc Main granulator: Main motor power: 37 kW. Rotor diameter: 420 mm. Rotor width: 900 mm. Cutting configuration: three-row V-shaped cutting arrangement. Additional equipment – SIMCO anti-static system: 4 ionising bars installed above the separation table. Bar model: SIMCO P-Sh-N. 2 SIMCO A2A7S high-voltage power units. Power unit supply: 230 V AC, 50 Hz. Bar operating voltage: 7 kV AC. Power unit protection rating: IP54. The SIMCO system neutralises electrostatic charges generated during material processing. It reduces the attraction and adhesion of insulation particles, supporting the separation of plastic from copper. Please contact us for further information or to arrange a viewing.

Condition: used, Year of construction: 1987, Max. working width: 630 mm Number of knives: 4 pcs Knife shaft: Tersa knife shaft Motor brake: Yes Max. planing height: 240 mm Min. planing height: 3 mm Max. material removal: 8 mm Thickness table adjustment: electric/manual & fine adjustment Thickness gauge display: mechanical digital display Feed speed, fixed: 6/18 m/min Thickness table spindles: 1 large Infeed rollers: Steel, toothed Nedpj Aaq R Iofx Ab Ajdc Outfeed rollers: Steel Weight approx.: 900 kg Motor power: 5.5 kW Dust extraction diameter: 150 mm Location: Customer

Condition: excellent (used), Year of construction: 1995, Surface planer and thicknesser combination machine Ndedpsz Uxmzsfx Ab Aec Manufacturer: Elektra-Beckum Model: HC 410 Year of manufacture: 1995 Working width: 410 mm Max. planing height: 230 mm Power: 5.5 kW Number of knives: 3 Knife type: Strip-type planing knives Feed rate: 7 m/min Surface table length: 1,700 mm Weight: approx. 300 kg Includes infeed/outfeed roller table.

Condition: new, machine/vehicle number: Baureihe GSE / Neumaschine, Economic granulators: This GSE series is ideal for all injection molding and blow molding operations. It is fundamentally suitable for all thin-walled plastic waste. These granulators stand out not only for their attractive purchase price, but also for their robust, split steel/welded housing, excellent cleaning accessibility, and easy knife and screen replacement. Thanks to the tangential housing geometry, combined with V-cut rotors (except GSE 300/300), even bulky and large-volume input parts are accepted and granulated by the rotor. Material transport: As standard, the granulators are equipped with an extraction system and bagging station. Optionally, a collection bin for regrind is available, which, like the extraction trough, is made of stainless steel. Nedpfx Aeyr I Eqob Ajdc

Condition: ready for operation (used), Year of construction: 1998, Available immediately from our location: Console milling machine REFORM Type UF 32 Year of manufacture 1998 Table 1400 x 300 mm Travel ranges X/Y/Z 1100/300/520 mm SK 50 Spindle speeds 31.5 - 1400 rpm Drive power 7.5 kW Digital display Hydraulic vise Ndjdpe Aa Iizjfx Ab Aec Weight 2.7 tons Many tools and milling cutters included Price: Euro 2,750.00 + VAT, ex works

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 4,500 kg, fuel type: electric, Shredding machine MRZ 1530, Main motor: 55 kW; 400 V - 50 Hz - 3 phase incl. turbo coupling Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3 phase Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control system: Siemens S7-1200 PLC Hopper opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 m³ hydraulically operated slide Screen opening: 12 - 15 mm Suction nozzle Ø 200 mm Weight approx. 4,500 KG Dimensions (l x w x h) approx. 2765 x 2520 x 1730 mm Turbo coupling Standard features include: - Profile rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start - Fast hydraulics Nodpfe Aa Nq Tex Ab Asdc - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput performance - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Special guides for hydraulic slide - Vibration-damping machine feet - CE compliant The shredder is designed for shredding untreated wood, chipboard, and MDF with a maximum hardwood content of 10% per hopper filling. If the hardwood content is higher, we recommend our MGZ series wood shredders. Other materials after testing and approval by the manufacturer. When shredding veneer or paper, a special scraper (at extra cost) is required to prevent the thin materials from getting under the hydraulic slide and causing it to jam. Requirements for the raw material: - The moisture content (oven-dry) must be below 14% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear - For an optimal shredding process, the material to be shredded must be pre-broken to a maximum of 140x80x30 cm before being fed into the wood shredder. The shredder is placed higher to prepare for the conveyor belt. The conveyor belt is not included!!!!!

Condition: excellent (used), Catalog number 7640 ADVANTAGES – Best wide-belt sander for both wet and dry wood – Ideal for processing logs, flooring, etc. – 2 sanding drums + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used sander, very good condition TECHNICAL DATA - Max. sanding width 610mm - Max. sanding height 200mm - Top: - Toothed infeed roller - Ratchets - Pressure roller - 2 toothed feed rollers - Pressure roller Ndjdpfxezx Suus Ab Aoc - 610mm sanding drum, 6-knife, 15kW - Pressure rollers - Smooth outfeed roller - Bottom: - Side pressure roller at the infeed - Guide strip - Infeed table - Toothed feed roller - 610mm sanding drum, 6-knife, 7.5kW - 2 smooth feed rollers - Side pressure roller at the outfeed - Rear: 2 side spindles + pressure rollers: 1) Vertical right 200mm, 15kW 2) Vertical left 200mm, 15kW - Vertical left spindle with electric left/right adjustment - Spindle diameter 40mm - Spindles arranged in an alternating pattern - Spindles adjustable up/down, left/right 3) Additional horizontal lower spindle 160mm, adjustable up/down + left/right, 5.5kW - Spindle diameter 35mm - At the outfeed: 2 upper metal sliding rollers, 2 lower feed rollers, rubber - Adjustable rollers in the lower table - Electric sanding height adjustment - 6 feed speeds: 12.8/16.3/20/25.6/32.6/40 m/min - Feed motor 8kW - Dust extraction port diameters: 2 x 120, 2 x 160mm - Dimensions (L/W/H): 2980x1980x1800mm - Weight approximately 3500kg Net price: 66900 PLN Net price: 15558 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)