Used Kemmerich Strip Decoiler for sale (2,579)

Condition: used, Year of construction: 2006, Stamping Press Manufacturer: Schuler Pressen GmbH & Co. KG, Göppingen, Germany Type: SAL 250-1.9 Mark II Serial number: A/260156 (Machine No. 2006-260156) Year of manufacture: 2006 Press force: 2,500 kN (250 tons) Stroke rate: 80–400 strokes/min Drive power: 51 kW at 2,000 rpm Ram stroke: 30 mm Ram adjustment: 100 mm Ram lift: 75 mm Installation height (table plate to ram, ram stroke bottom, ram adjustment top): 550 mm Table dimensions: 1,950 x 1,060 mm (as per drawing) Ram face: 1,950 x 800 mm (as per drawing) Compressed air: 5.5 bar Total weight (excl. feed): 48,000 kg Control system: SYS PACO 8000 Sound-insulating enclosure (orange) Nlsdpfx Afozil S Io Sog Strip Feed Unit Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Type: KRS 18.260/19-2000.2H-BF1 Serial number: 40 871 Year of manufacture: 2006 Connected load: 15.5 kW Supply voltage: 400 V, 50 Hz Decoiler Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Model: 18 260-1000.2 Serial number: 40 466 Year of manufacture: 1984 Connected load: 8 kW Supply voltage: 380 V, 50 Hz

Condition: excellent (used), Year of construction: 2012, section dimension max. 150 x 50 mm pipe Ø 50 – 150 mm wall thickness 1,5 - 5,5 mm reference material (tensile strength) 600 N/mm² coil Ø max. 2.100 mm coil weight max. 10 t finish pipe length max. 9.000 mm round pipe Ø according to list rectangular pipe according to list speed 100 m/min working direction left → right The line consists of: Nedpfx Asuc Sw Aef Solg 1. entry part: double carousel decoiler coil opener/pinch roll unit/leveller crop shear strip tail end welding machine strip guide strip twister/pinch roll unit/strip accumulator entry strip accumulator edge trimming exit twister 2. forming part: No. of horizontal stands: 4 No. of vertical stands: 3 3. welding part (HF) 4. calibrating part 5. separation 6. edge bevelling 7. blowing out 8. bundling 9. hydraulics 10. electrics

Condition: good (used), Year of construction: 2003, functionality: fully functional, SOPREM Precision Coil Feeding Line (Decoiler + Straightener) — 2003. Complete matched feeding line for thin precision strip, ready to pair with a small high-speed stamping press. Decoiler — Type H1000.1000ZV. Max coil weight: 1000 kg. Coil Ø: 1000 mm outer / 375–520 mm inner. Reel speed: 2–20 rpm, 1.5 kW drive. Straightener — Type BR 19 . 160 . 12 . U . Strip capacity: up to 0.5 mm thick × 160 mm wide. Hydraulically driven precision straightening unit. Both units built 2003 · 400 V / 50 Hz · synchronized line with E-stop interlink to downstream press · Made in Switzerland. Technical Specifications Decoiler / Coil Reel (Haspel) H1000 / 1000ZV / 10M / LK.LF / N1 / G Serial No. (nameplate): 110103 Max coil weight: 1000 kg Coil outer Ø: max 1000 mm Coil inner Ø: 375–520 mm Nljdpfx Aszav H Sef Ssg Reel speed: 2–20 rpm Motor: KSMV 90L (4), 1.5 kW, 1400 rpm Gearbox: RMI 110 FL LCB, ratio i = 70 Slip clutch: set to 400 Nm Strip sensing: floor contact plate (loop control) Precision Band Straightener (Richtwerk) BR19.160.12.U Function: straightens coil curvature before the press Max strip thickness: 0.5 mm Max strip width: 160 mm Drive: hydraulically driven precision straightening unit Electrical Supply 400 VAC, 50 Hz, 3-phase + neutral + earth Rating: 25 A pre-fuse

Year of construction: 1986, condition: used, functionality: fully functional, We are offering this used Fecken-Kirfel G1 band splitting machine, manufactured in 1986, for sale. Manufacturer: Fecken-Kirfel Machine type: G1 band splitting machine Model: G1 Year of manufacture: 1986 Condition: used Length: 4,500 mm Width: 1,200 mm Height: 1,400 mm Working width: 800 mm Weight: approx. 3.5 t The machine is being sold due to the purchase of a new machine and is in working order. Nlsdsztmybjpfx Af Sjg If you have any questions or require further information, please do not hesitate to contact us.

Condition: used, DECOILER DIMECO WIDTH: 1350mm COIL WEIGHT: 12t WITH INVERTER HYDRAULIC OPEN / CLOSE Nlsdpfxeytqxpe Af Seg

Condition: new, Year of construction: 2023, Cut-to-length slitting machine is used for longitudinal cutting of the metal sheets with maximum thickness 1mm, aluminum composite panels, paper, polycarbonate thanks to special cutting knives that are fixed on rolls of the slitting machine. Cut-to-length slitting machine SM 1250x8 lets you to cut the material into eight strips. The diameter of the rolls is 56 mm There are types of the sheet metal cut-to-length machines we produce: -Electric cut-to-length slitting machine SM 1250x4 (cutting for 3-4 strips) -Electric cut-to-length slitting machine SM 1250x8 (cutting for 6-10 strips) -Electric cut-to-length slitting machine SM 1250x12, SM 1250x20 (cutting for 12-20 strips) The operator of cut-to-length slitting machine can easily change the width of the strips and their numbers. There are special screws on the knives to do it. You can easily cut sheet metal right from the decoiler with our cut-to-length slitting machine. Cut-to-length slitting machine could be equipped with cross cutting knife. The machine has strong base to avoid deformation while cutting and lets to cut metal into 8 strips with the perfect quality. The cutting speed of the slitting machine is about 10 meters/minute. Cut-to-length slitting machine is electric so it doesn’t need any air or oil system to work. Electric consumption is 1.5 kW/hour. The voltage is 380V. It could be used in environment with temperature from -10 to +45 Celsius degrees. Our enterprise has started to produce this kind of cut-to-length slitting machine (slitter) since 2008 so we have great experience in doing our job and can propose great solution to your business. To get more information about the price of this slitting machine and the way it could be delivered to your location just contact us. We will give you all the information you may need. Dimension: 170.00Sm x 120.00Sm x 100.00Sm Weight: 250.00Kg Engine: 1.1-1.5 kW Nodjf Epzgjpfx Af Solg

Condition: used, Year of construction: 2004, machine/vehicle number: 2177/03/9604014, Press capacity: 160 ton Ram stroke adjustable: 20 - 130 mm Slide adjustment: 100 mm Daylight: 560 mm Table surface area : 1500 x 800 mm Slide area: 1400 x 800 mm Number of strokes: 20 - 60 s.p.m. Distance between the columns F - B: 520 mm Height over floor approx.: 3550 mm Required power: 48 kW Weight of machine approx.: 26 ton Standard configuration Control system SIEMENS S7 Extended machine accessories Nsdjuqdzdjpfx Af Sjlg Automation PME feeding unit consisting of decoiler and feed / straightening unitDecoilerLoad capacity 2 tStrip width 400 mmMaterial thickness 0.5 - 4.5 mmCoil outer diameter 1800 mmSpreading range 470 - 630 mmHydraulic expansion of the spreadHydraulic pressure armElectronic feed / straightening unitMax. strip width 400 mmMax. material passage 410 mmMaterial thickness 0.5 - 4.5 mmCross-section 1200 mm²Number of straightening rollers 7Straightening roller diameter 80 mmNumber of feed rollers 2Pneumatic lifting of feed rollersFeed speed 50 m/minFeed length 0 - 10 m

Condition: excellent (used), Year of construction: 2018, operating hours: 16,000 h, functionality: fully functional, machine/vehicle number: 0,2-1, conveyor belt thickness: 1 mm, coil weight: 5,000 kg, conveyor belt width: 1,000 mm, sheet thickness aluminum (max.): 1 mm, sheet thickness steel (max.): 1 mm, blade shaft diameter: 100 mm, load capacity: 5,000 kg, space requirement height: 3,000 mm, Slitting line for longitudinal cutting of thin strips from 0.2 mm. We mainly processed 0.2 or 0.3 mm material. Decoiler 5t with an inner diameter of 510 mm, recoiler with an inner diameter of 200 mm. The line is operational and can be tested. Operator training can be provided. Njdeynut Hepfx Af Sslg

Year of construction: 1997, condition: ready for operation (used), A transfer press line is offered, consisting of a Gräbener double-column transfer press including a feed unit and a Fecker decoiler-straightener combination with strip feed. 1) Gräbener GSET 2-250-280-315 double-column transfer press, year of manufacture: 1997, condition: operational, nominal force: 2500kN, nominal force stroke: 5mm, nominal energy capacity: 45kJ, slide stroke: 315mm, max. stroke rate: 50strokes/min, slide adjustment: 125mm, number of connecting rods: 2, shut height between bolster and slide: 800mm, bolster dimensions X/Y/Z: 2800mm/1150mm/200mm, slide area X/Y: 2800mm/900mm, max. die cushion stroke: 160mm, die cushion force: 88kN, machine dimensions X/Y/Z: approx. 5200mm/2700mm/5450mm, dimensions including sound enclosure X/Y/Z: approx. 7200mm/4700mm/5610mm, weight: approx. 55000kg. 2) Feed unit, condition: partially operational. 3) Fecker decoiler-straightener combination with strip feed, max. load capacity: 3000kg, max. coil outside diameter: approx. 1500mm, strip pass line height: approx. 1240mm, overall height: approx. 2740mm, width of the decoiler section: approx. 1680mm, length of the strip transfer table: approx. 3500mm. Documentation available. Inspection possible by arrangement. Njdpjzrhhqofx Af Selg

Year of construction: 2025, condition: ready for operation (used), Automatic Coil Cut-to-Length Line manufactured in 2025. This SACFORM CRL1503-6 is designed for processing aluminum, mild steel, and stainless steel with a material thickness capacity of 1-3 mm. It features a maximum coil weight of 6000 kg and a finished sheet length of 500-4000 mm. If you are looking to get high-quality cut-to-length capabilities, consider the SACFORM CRL1503-6 machine we have for sale. Contact us for further details regarding this machine. • Capacity: 1500 mm width x 1–3 mm thickness (AL/MS), up to 1.5 mm (SS), 6-ton coils • Materials: Aluminum (AL), Mild Steel (MS), Stainless Steel (SS) • Finished sheet size: width 500–1500 mm; length 500–4000 mm • Coil specs: ID 490/610 mm; OD max 1400 mm; weight max 6000 kg • Line speed: 30 m/min free working speed (start-stop shear adds ~2.5 s per cut) Nljdpfx Aszwc Ipjf Sog • Operators: 1 • Power and utilities: • Electrical: 380 V, 3-phase, 50 Hz; auxiliary 220 V, 50 Hz; 24 V DC solenoids • Installed power 32 kW; typical working consumption 13 kW • Pneumatic air: 6 bar • Hydraulics: service 120 bar; main service 220 bar; 2 hydraulic units, each 40 L • Control and electronics: Siemens PLC; Siemens/Rexroth electronics and control panel; 7" touchscreen; remote support capabilityLine configuration (included modules and key specs) • Hydraulic coil loading car: • Capacity 6000 kg (single coil), max width 1500 mm, max OD 1400 mm • V-type bed, hydraulic traversing and lifting (300 mm stroke), panel control • Single-mandrel hydraulic decoiler: • Capacity 6000 kg; max strip width 1500 mm; ID 490–610 mm; OD 1400 mm • Hydraulic mandrel with conical expansion; motorized drum with reducer, adjustable speed • Upper pressure/safety arm; laser sensor for controlled decoiling and auto stop • Automatic routing/threading platform with servo bending arm: • Automatic coil threading and transfer to straightener • Bending arm: 2 rollers Ø110 mm, servo-driven; 2 pistons • Platform movement: hydraulic up/down and fwd/back; automatic, no manual threading • Straightening unit: • Speed up to 30 m/min; working width 500–1500 mm • 11 rollers total: 7 straightening, 2 feeder, 2 pinch (all Ø110 mm) • Motorized straightener adjustment; hydraulic openable roller group • Pneumatic roller pressure; low-backlash gear group; gear material 8620 • Vertical bearing guides; 2 guiding units; width adjustment via gear system • PVC coating feature included • Servo feeder: • Speed up to 30 m/min; max width 1500 mm; thickness 1–3 mm • 2 servo rollers (upper/lower) Ø110 mm; roller material 4140 • Encoder-based cut-to-length control; pneumatic pressure; low-backlash gears • Guiding: double-sided lateral guides, horizontal guide rollers, gear-width adjustment, right/left alignment to 90° • Servo control: automatic feeding cycle, programmable velocity, programmable cut length and quantity, memory for 250 programs and up to 50 lengths, 7" touchscreen, 8 external outputs • Start-stop guillotine shear: • Cutting capacity 1–3 mm; width 1500 mm • Blade material 2379; high-carbon/high-chrome blades; 2 edges upper, 4 edges lower • Adjustable blade gap; mechanical sheet clamping • Approx. 2.5 s cycle time loss per cut; Teflon slideways on cutting beam • Hydraulic and pneumatic brands: Bosch Rexroth/Bucher hydraulic valves; Festo/Pemaks pneumatics; motors Gamak/Yilmaz • Electrical/automation: Siemens PLC; Siemens/Rexroth components; electrical cabinet and automation systemNotes • Stainless steel capacity limited to max 1.5 mm thickness.

Condition: used, BONAK 2000 x 12 mm Cut to length line This heavy-duty BONAK Cut-to-length line is designed for processing hot-rolled steel coils with high reliability and precision. Built for demanding industrial applications, this CTL line is capable of handling material up to 12 mm thickness and widths up to 2060 mm. Manufactured by the well-known Spanish builder BONAK, the line is currently in operation. Main technical specifications - Manufacturer: BONAK (Spain) - Model: 2000 x 12 mm - Material: Hot-rolled steel - Material tensile strength: 40 – 45 Kg/mm² - Strip width range: 650 – 2060 mm - Thickness range: 3 – 12 mm - Maximum coil weight: 20 tons Nedpfx Ajy Uhybof Sslg - Maximum working speed: 25 m/min - Working direction: Left to right Scope of supply The complete line includes: - 20-ton loading carriage - Double cone decoiler - Automatic centring device - Coil opener and pulling rolls - Leveller with driving unit: 11 rolls, Ø 110 mm - Measuring wheel - Edge trimmers - Edge guiding system - Scrap recoiler - Intermediate rolls table - Pulling rolls - Hydraulic start/stop shear - Measuring table - Stacker Advantages of this CTL ✓ Suitable for heavy-gauge hot-rolled steel processing ✓ Robust and reliable BONAK construction ✓ Complete levelling and shearing solution ✓ Integrated edge trimming and scrap recoiling system ✓ High-capacity 20-ton coil handling ✓ Ideal for steel service centres and plate processing operations ✓ Line currently installed and operational This machine offers an excellent opportunity for companies looking for a cost-effective and dependable cut-to-length solution for thick hot-rolled material processing. Machine available subject to prior sale. Inspection can be arranged upon request. Strip width range: 650 – 2060 mm Thickness range: 3 – 12 mm Maximum coil weight: 20 tons Material: Hot-rolled steel Maximum working speed: 25 m/min Working direction: Left to right

Condition: used, Year of construction: 1998, functionality: fully functional, For sale: Coil metal decoiling, slitting, and recoiling line Condition: used, connected – available for live demonstration. Designed for coil metal decoiling, precise slitting into narrower strips, and recoiling into smaller coils. Technical specifications: Year of manufacture: 1998 Made in: Poland Max. metal width: 1250 mm Knife pairs: 5 Longitudinal slitting, steel: min 0.4 mm / max 1.2 mm Film application function Scrap cutting guillotine Nedoxlcp Nspfx Af Selg Line includes: Decoiler 5 T Recoiler 5 T Multi-knife disc shears Braking and separating segment Turnstile with separator Control panel Purpose: The line is intended for preparation of coil metal for further processing: decoiling, precise longitudinal slitting, recoiling into smaller coils. If you have further questions – we will be happy to assist you.

Year of construction: 2021, condition: used, DECOILER Nledpfxogf Aaqj Af Sog MAX COIL WEIGHT 1000kgr MAX COIL WIDTH 400mm MIN INNER COIL DIAMETER 370mm MAX OUTER COIL DIAMETER 550mm POWER 1,1kw LIKE NEW UNUSED 4 PIECES IN STOCK

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, Complete coil-fed cutting and feeding line for disc production Composed of: • Feeder/Decoiler: LARA DEMAE-10000/100/1400-D • Cutter: TIMAC TZZ-1604 with double-station stacker • Shear and feed table up to 1400 mm by LARA Condition: In operation, ready for production. Designed mainly for working with carbon steel, stainless steel, and aluminum. The installation combines a servo-driven straightener-feeder from LARA with a TIMAC circular shear, scrap-cutting shear, and automatic double-station stacker, allowing for continuous, precise, and safe operation. Main components: Hydraulic motorized decoiler with loading cart and loop control via laser sensor. Equipped with safety barriers in the coil loading area for optimal visibility during the decoiling and cutting process. Combined straightener-feeder with 11 rollers and AC servomotor controlled by PLC + touchscreen HMI. TIMAC circular shear with adjustable blades and diameter adjustment system. Automatic double-station stacker with suction-cup arm and interlocked safety doors. Nsdpfxoxr Utaj Af Solg Integrated pneumatic and electrical systems with Unidrive inverters and a single control cabinet. Two control panels—one for each machine group—each with a touchscreen, interconnected to ensure communication and coordination between the LARA and TIMAC sections. Table for sheet scrap removal and LARA shear. Main technical data: Maximum strip width: 1,400–1,600 mm (maximum 1,400 mm on straightener) Sheet thickness: up to 3 mm (carbon steel) / 1.5 mm (stainless steel) Blade diameter: 100 mm Installed power: approx. 16–20 kW Electrical supply: 400 V / 50 Hz Working pressure: 6 bar Overall dimensions (approx.): 8.8 m (L) × 6.8 m (W) × 3.3 m (H) (L-shaped configuration, with side loading and stacking zones)

Condition: excellent (used), Year of construction: 2016, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: 565697, type of input current: three-phase, input voltage: 400 V, belt width: 600 mm, conveyor belt width: 600 mm, The Wagner non-ferrous metal separator (NE separator), model 0429 from Wagner Magnete, is one of the manufacturer’s high-performance eddy current separators. Working width: 600 mm. • Throughput: depends on the material and grain size. • Rotor speed: up to 3,000 revolutions per minute. • Belt speed: 0.5 to 2.0 m/s. • Weight: 1.2 tons. • Rotor system: Eccentrically mounted with a high pole-changing frequency. Nsdpfx Aozl Rfxjf Sjlg • Rotor drive: 4 kW; belt drive: 1.5 kW. The machine and the associated control panel are included in the delivery. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner’s expense and can be delivered EXW at a port or in the production facility. The details for optimal transport need to be clarified. The machine price is quoted without packaging on a pallet.

Condition: used, Year of construction: 1987, functionality: fully functional, table length: 950 mm, table width: 910 mm, pressing force: 80 t, overall weight: 16,500 kg, punching force: 80 t, Max. pressing force: 80 tons / 800 kN Strokes per minute: 100 - 1000 SPM Mains voltage: 400 V Mains frequency: 50 Hz, 60 Hz Power consumption: 43 kW Control voltage AC: 24 V Compressed air connection: 6–10 bar Stroke length adjustment: 16, 19, 26, 35, 43, 51, 58, 63 mm Ram adjustment: 76 mm Nlsdpsxzr Rusfx Af Sog Average upper tool weight: 600 kg Maximum tool width: 970 mm Bolster area: L–R: 950 mm F–B: 910 mm Ram area: L–R: 760 mm F–B: 510 mm Max. tool width (L–R): 970 mm Strip inlet height: Max.: 160 mm Min.: 70 mm Strip feeder (left): Bruderer BBV 202/120 Max. strip width: 202 mm Feed pitch: 0–120 mm Bed opening: L–R: 920 mm F–B: 320 mm Machine dimensions: Length: 2834 mm Width: 1742 mm Height: 3460 mm Total weight with 1× BBV 202: approx. 17,500 kg Electrical cabinet dimensions: Length: 1200 mm Width: 500 mm Height: 1025 mm Weight: approx. 250 kg The soundproof cabin is not included in the offer, but it can be purchased separately. We also have many additional Bruderer, Schaal, Mabu and Bihler press models in stock, as well as decoilers and strip straighteners.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, overall weight: 16,500 kg, total width: 2,185 mm, total length: 5,563 mm, total height: 2,195 mm, Specification: Maximum sheet size: 740 x 1060 mm Minimum sheet size: 330 x 400 mm Maximum cutting force: 300 tons Mechanical speed, up to 8,000 sheets/hour Materials processed: Paper and cardboard: 0.1 - 1.5 mm Corrugated cardboard up to B-flute Nedpfx Ajzt Nbzef Selg Equipment: - Steel feeding plate - Lifting suction cups - Transport suction cups - Adjustment of brush and roller position on the delivery table, using a single knob - Touchscreen monitor mounted on the machine - Pneumatic stops at the front guides - Laser sensors on the front guides - Modification of sensors for transparent materials - Pneumatic closing of the frame and die plate - APC System – Automatic Pressure Control System APC1 - automatic control of cutting pressure, allowing for maintaining the same pressure during the die-cutting/punching process. Possibility to set tonnage tolerance and control the sheet count after a certain number of pieces. - Programmable safety clutch for exceeding cutting force - pneumatic - Stabilizing air blast in the cutting section, increasing precision and cutting speed for thin papers - Quick-change tool system in the stripping section – Punching Metal (upper and lower stripping fingers) - Europing Centering System – die-cutting and stripping zone - Automatic non-stop stacking system, with a curtain and programmable number of sheets per stack - Upper curtain air blast in the stacking zone - Slip sheet inserter with batch counter, located in the stacking zone - Spare gripper carriage – 1 unit - Power transformer Delivery time: immediately after acceptance of the commercial terms and payment of the financial amount. This announcement has been automatically translated. Translation errors are possible.

Condition: used, Year of construction: 2006, overall weight: 1,200 kg, Strip cutter, trim saw MAKOR SAP 30 Nsdpsytc Ivsfx Af Selg This machine is ideally suited for cutting wooden strips and MDF strips. Year of manufacture: 2006 OPPORTUNITY TO PURCHASE THE FOLLOWING MACHINES AT INDIVIDUAL PRICES: 1. Profiling machine for grinding wheels and silicone wheels from the Italian company MAKOR, price €1,500 - Year of manufacture: 2003 - Serial number: 5933 - Diameter of profiling wheel: 160 - 200 mm - Diameter of profiling disc: 180 - 200 mm - Weight: 280 kg 2. FILM SLITTING MACHINE MAKOR ST/100, price €1,200 3. BELT CONVEYOR MAKOR TEP 3000, price €700

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. Nodpfxsxghngs Af Solg The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Year of construction: 2001, condition: used, functionality: unexamined, Hot stamping foil laminating machine for strips MAKOR, model DORA 7, year of manufacture 2001, price €19,100 OPTION TO PURCHASE THE FOLLOWING MACHINES AT INDIVIDUAL PRICES: 1. Profiling machine for grinding wheels and silicone wheels, Italian manufacturer MAKOR, price €1,500 Nledpfeytc E Uox Af Seg - Year of manufacture: 2003 - Serial number: 5933 - Diameter of profiled wheel: 160 - 200 mm - Diameter of profiling disc: 180 - 200 mm - Weight: 280 kg 2. MAKOR ST/100 foil slitting machine, price €1,200 3. MAKOR TEP 3000 conveyor belt, price €700

Condition: new, Year of construction: 2026, Automatic Slitting & Cut To Length Line Coil Slitting and Cut To Length Production Line for Sheet Metal Processing The Automatic Slitting & Cut To Length Line is designed for longitudinal slitting and cross cutting of sheet metal coils into strips and flat sheets with programmable lengths. Nljdpfx Afezrwhms Ssg The production line combines several operations in one compact system: Coil feeding Slitting Precision leveling Servo length measuring Cut-to-length part Finished sheet conveying Automatic stacking The machine is suitable for processing galvanized steel, pre-painted steel and other coated sheet materials used in HVAC production, roofing, facade systems, roll forming and general sheet metal fabrication. Main Features Combined slitting and cut-to-length production Fully automatic operation Hydraulic cutting system Precision sheet leveling Servo-controlled length measurement PLC controlled production Touchscreen operator interface High production accuracy Compact machine layout Reliable industrial construction Material Processing Suitable materials include: Galvanized steel (GI) Pre-painted galvanized steel (PPGI) Coated sheet steel The slitting section is equipped with hardened tooling designed for accurate strip production. The slitting system provides accurate strip widths with stable cutting quality during continuous production. The production line is equipped with an automatic hydraulic cut-to-length system. Typical cutting tolerance: ±2.5 mm for sheet lengths up to 5000 mm ±3.0 mm for sheet lengths between 5000 and 10000 mm Drive System The roll forming and feeding system is powered by: Main motor: 4 kW Hydraulic power unit: 3 kW Power transmission: Chain drive Industrial gearbox Heavy-duty mechanical transmission Control System Technical Specifications Parameter Specification Machine Type Automatic Slitting & Cut To Length Line Material GI / PPGI Maximum Coil Width 1000-1250 mm Material Thickness 0.25–0.1 mm Minimum Slitting Width 60 mm Heavy-duty 120 mm shaft diameter Maximum Number of Slitting Knives 5 Production Speed 10–15 m/min Main Motor 4 kW Hydraulic Power 3 kW Cutting Accuracy ±2.5 mm (≤5000 mm) / ±3 mm (5000–10000 mm) Cutting Type Hydraulic Cut To Length Transmission Chain Drive Machine Structure Wall Plate Frame + Column Cutting Structure Machine Dimensions Approx. 2500 × 1500 × 1400 mm Electrical Supply 380 V / 50 Hz / 3 Phase The production line is suitable for manufacturing: HVAC duct blanks Ventilation components Roofing sheets Wall cladding panels Roll forming blanks Sheet metal parts Laser cutting blanks Press blanks Electrical cabinet panels Industrial sheet products Advantages Slitting and cut-to-length in one production line Compact machine footprint High processing accuracy Low maintenance requirements Fast production changeover Automatic sheet stacking High productivity Reliable hydraulic cutting Precision leveling Suitable for continuous industrial production Standard Equipment Depending on customer requirements, the production line can be supplied with: Manual decoiler Hydraulic decoiler Double decoiler Coil loading car Protective film laminating unit Different slitting knife configurations Increased material thickness capacity Different coil widths 1.5 m conveyor table 3.0 m automatic stacking system

Condition: used, Year of construction: 2000, functionality: limited functionality, overall weight: 3,000 kg, total length: 1,500 mm, total width: 700 mm, total height: 600 mm, input voltage: 380 V, type of input current: three-phase, year of last overhaul: 2010, Joint Strip Oto Mills (strip splicer), equipment suitable for splicing strips at the entry of the rollformer accumulator. Nedpjxmaa Ijfx Af Selg

Condition: new, Year of construction: 2026, Automatic Roll Forming Line for Light Gauge Steel Frame Production This automatic roll forming line is designed for manufacturing Light Gauge Steel (LGS) and Cold Formed Steel (CFS) structural profiles used for steel frame houses, modular buildings, commercial buildings and prefabricated construction systems. The production line automatically performs feeding, leveling, punching, roll forming, profile marking and hydraulic cutting according to digital production data. It is an ideal solution for manufacturers of: Light Gauge Steel structures Steel frame houses Prefabricated buildings Modular buildings Tiny houses Commercial steel structures Residential steel framing Cold formed steel construction systems Nedezrt Ivepfx Af Selg Flexible Machine Configuration The roll forming line can be supplied in two different configurations depending on production requirements. Fixed Profile Machine Designed for manufacturers producing one profile size with maximum productivity and simplified machine setup. Multi-Profile Roll Forming Machine An adjustable roll forming system capable of producing several profile widths on one machine by changing the roll forming configuration. This solution provides greater production flexibility while reducing investment costs compared with purchasing multiple dedicated production lines. Complete Automatic Production Process The machine automatically performs the following operations: Coil feeding Strip leveling Servo punching Hole punching Slot punching Service hole punching Roll forming Profile identification marking Hydraulic cutting to length Finished profile discharge The production line is designed to work with professional steel frame design software. The operator imports production data generated from a building design into the machine control system. Based on this information the machine automatically manufactures every structural member including: wall studs tracks floor joists roof trusses rafters beams structural reinforcements Each component is produced with the correct length, punching pattern and identification marking required for final assembly. Automatic Profile Marking Each profile can be automatically marked during production. Typical marking information includes: Profile number Wall identification Member position Assembly reference Project identification Automatic marking significantly simplifies profile sorting and speeds up on-site assembly. Instead of manually identifying every component, installers receive a complete production kit with every profile clearly identified. Automatic Punching System All punching operations are synchronized with the roll forming process to achieve high accuracy and repeatability. Main Advantages Fully automatic production Computer controlled manufacturing Automatic profile marking Servo punching system Hydraulic cutting High dimensional accuracy Reduced material waste Fast production Flexible profile sizes Suitable for custom house projects Reduced manual labour Easy assembly thanks to profile identification Applications Technical Specifications Typical options include: Single-profile roll forming machine Multi-profile adjustable machine Automatic profile marking Servo punching Hydraulic cutting Automatic decoiler Hydraulic decoiler Computer control system Production management software compatibility

Condition: good (used), Year of construction: 2006, coil weight: 500 kg, Millutensil SLMD 500. Double decoiler / double rewinder. Capacity load: 500 kg x 2. Inner diameter min 350 mm max. 600 mm. Strip width up to 300 mm. Outer diameter max. 1600 mm. High frequency inverter Danfoss. Sensor for loop control. Nlodpju A T Hzjfx Af Sjg Dimension 2000 mm x 2000 mm height 1800 mm. Made in Italy. More coilers, and presses on stock, Bruderer, Schaal, Mabu, Bihler, Schuler, Amada, San Gimignano, Kaiser, EBU...

Year of construction: 1989, condition: used, functionality: fully functional, Model: Gemini ESCO D6-SR with unwinding reel Year of manufacture: 1989 Max. material diameter: 6.35 mm Max. machining length per stroke: 62 mm Number of rotating tools: 3 (or turret version with 4 positions) Max. tool head speed: up to approx. 7,100 rpm Machine dimensions (machine only): Machine bed, partially, approx. 1,000 × 3,400 mm Operating voltage: 380V 50 Hz Control voltage: 110 V 50Hz Nodpfx Afsyip E Tj Sslg Rated power: 3.4 kW Rated current: 6 A