Used Isopad Thermostat for sale (207)

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors, Smooth exterior walls Equipment: -+2° C to +10° C -45mm insulated wall -GOVI 1600N Net: €10,075.63 / Gross: €11,990.00 Article number: UC6226361719.01 Technical data: • Brand: Unsinn • Model: UKT 6C 3617-26-14 • Vehicle type: Refrigerated trailer • Vehicle condition: New • First registration: Without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 360 x 170 x 190 cm • External dimensions (L x W x H): 542 x 229 x 253 cm • Loading height of the floor: 53 cm • Permissible total weight: 2,600 kg • Unladen weight: 860 kg • Payload: 1,740 kg • Chassis: Low loader (wheels next to the body) • Tires: 185/65R14 • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Unique, torsionally rigid aluminum chassis for safe driving characteristics • Loading area made of multi-layered glued screen printing board, 18 mm • 4 stable telescopic crank supports for up to 6000kg standing weight • Thermo-sandwich construction • Inner and outer skin made of hot-dip galvanized and powder-coated steel sheet, for robust use • Insulation 45 mm PU core • Exterior color silver RAL 9006 • Rear door double-wing with aluminum hinges • Refrigerated room pressure lever lock and stainless steel door retainer • Rear frame and edge profiles made of special aluminum profiles anodized for aesthetically pleasing appearance • Impact protection 200 mm at the bottom, all around on 3 sides • Refrigeration unit Arctic 1600 N • Cooling capacity 1600 watts at a refrigeration room temperature of +6° C and an ambient temperature of 30° C • Temperature control range from +2° C to +10° C • Air volume flow evaporator: 750 m³ • Completely encapsulated unit with "outdoor" housing mounted at the front on top • Environmentally friendly, CFC-free refrigerant • Electronic evaporator defrosting system • The control display can be locked and is thus protected against unauthorized operation • Electronic digital thermostat for optimal control of the temperature range • 230 volt interior lighting • Very stable V-drawbar, REINFORCED • ALKO overrun device and parking brake • Reverse automatic • Plastic fenders • 13-pole plug • Reversing light • Oversized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Reinforced automatic support wheel, for safe parking of the loaded trailer, load capacity 500 kg _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any desired options! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Gkjdpezy Dpyofx Ak Ujb Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Specialist dealer & repair - workshop for over 30 years - Subject to errors, omissions and prior sale -

Condition: new, power: 140 kW (190.35 HP), fuel type: diesel, color: grey, gearing type: automatic, number of seats: 9, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Sprinter Lord COMFORT VIP Stock vehicle, immediately available. Comes with COC for the base vehicle and Stage 2 conversion, making it registrable in all European countries. Conversion details: - Electric exterior sliding door - 7 reclining sleeper seats, 540 mm wide (extra wide) with armrests on the left and right, including carbon fiber trim - Dos a Dos / club table for 4 passengers - Side panel upholstered with synthetic leather (no exposed metal in the interior) - Webasto 10 kW air conditioning system with ceiling ducts on the left and right in the passenger compartment - Service sets at each seat row with reading light, fresh air vent, and speakers - USB ports at each seat row - Multi-level night lighting - Glass roof / panoramic sunroof with manual sunshade Gksdjzyzu Tepfx Ak Ueb - Double glazing, VIP Black, in the original opening - Curtains on the windows - Convector heater in the passenger compartment, thermostatically controlled - Luggage shelf behind the last seat row - Flat passenger compartment floor from Gerflor in a wood look - All components painted in vehicle color - Refrigerator between the driver and front passenger seats -... further options, especially custom orders, available upon request. Special equipment: Driving assistance package, extended restart function (automated), route-based speed adjustment, tachograph operation at the front under the headliner, chassis: stabilization level I, tail lights partially LED, folding cover for storage compartment, fuel tank: main tank 71 liters, charging package dashboard (USB ports and 12V socket additionally), heated steering wheel, light alloy wheels 6.5x16 (6-spoke), metallic paint, parking package with 360° camera, interior rearview mirror, windshield wiper system (Wet Wiper System), mud flaps rear, mud flaps front, seats in the cab: adjustable co-driver seat, seats in the cab: heated driver seat, seats in the cab: driver seat comfort, seats in the cab: driver seat with lumbar support, reinforced front axle, electrical pre-wiring, parameterizable special module, tachograph pre-wiring, auxiliary heater (air) electric, auxiliary heater (hot water) Additional equipment: 3rd brake light, storage compartment above the windshield, storage compartment below the dashboard on the co-driver's side, tow hitch rear, adaptive brake light, airbag co-driver side, airbag driver side, acoustic package, trailer coupling: electrical connection for trailer socket, exterior mirrors electrically foldable, exterior mirrors electrically adjustable and heated, both, outside temperature display, DAB tuner (digital radio reception), ceiling light in the cargo area with door contact switch, automatic activation for headlights, grab handle on the rear pillar rear right, grab handle for the sliding door on the cargo area partition, driving assistance system: breakdown management, generator 250 A, noise reduction measure exterior, body/structure: box high roof standard, instrument cluster with color display, communication module (LTE) for digital services, steering wheel (steering column mechanically adjustable), steering wheel with multifunction buttons, M1 approval, marker lights on the side, Mercedes-Benz emergency call system, engine 2.0 L - 140 kW CDI CAT, multimedia system MBUX (touchscreen 10.25"), Pro, wheelbase 3665 mm, low emissions according to emission standard Euro VI, sliding door cargo/passenger compartment right, safety belt system with warning system (co-driver side), safety belt system with warning sy

Condition: used, Year of construction: 2012, Overview This craft brewery system was manufactured in 2012 by Slowbeer and other manufacturers. The system is designed for beer production and includes brewhouse, fermentation vessels, milling equipment, and temperature control units. The machines are described as in very good condition with low operating usage. Technical data - Capacity: 250 L brewhouse - Application: Beer production - Configuration: Brewhouse, multiple fermenters, malt mill, heating and cooling unit Scope of Delivery  Gsdpfx Asy Sic Sek Uekb - Brewhouse | Slowbeer | MB 250E | 2012 | 250 L brewhouse system - Fermenter | 2012 | 500 L stainless steel fermenter with CIP system - Fermenter | 2012 | 2 × 1,200 L isobaric conical fermenters - Fermenter | 2012 | 1,200 L isobaric flat-bottom fermenter - Malt mill | Sommer | Piccolo 11S | 2012 | Capacity 100–150 kg/h with support frame and hopper - Heating and cooling unit | Winus | Model M | 2012 | Control unit with 4 digital thermostats for up to 10,000 L - Pump | 2012 | Transfer and cleaning pump with inverter

Condition: new, -Dimensions: 2000 × 1870 × 1940 mm -New oven, never used, but a showroom model -Serial number: 0054.2015 -Year: 27-04-2024 -MRe Standard range -Energy: wood + electric sole -Capacity: 10 pizzas Ø30 cm -Productivity: 170 pizzas/hour -Electric power: 8.5 kW -Wood power: 35 kW -Combustion air: 173 m³/h -Flue gas temperature: 110 °C -Rotating sole with variable speed -Rotating sole with variable direction -Sole heated by electric resistors -Wood firebox on the left as standard -Wood firebox on the right (optional) -External ash collection drawer -Inteltouch System touchscreen interface Gkjdpfjzlp Ilex Ak Uob -Dual manual / automatic mode -Three programmable cooking programs -Analog thermostat controls (optional) -Sorrentino stone for bread or pizza (upon request) -Exhaust diameter: 250 mm -Mouth width: 650 mm -Net weight: 2250 kg -Key benefits Motorized rotating sole with variable speed and direction to improve cooking uniformity. Electric heating under the sole to enhance the thermal stability of the cooking surface. Capacity of 10 pizzas Ø30 cm, suitable for regular service and peak activity. Lateral wood firebox with door, standard on the left and available on the right as an option. External ash drop and collection drawer to simplify maintenance and preserve cleanliness during cooking. Inteltouch System touchscreen as standard, with automatic / manual operation and programmable cooking programs. Large natural stone shelf to facilitate cooking movements in front of the oven mouth.

Condition: new, -Dimensions: 2000 × 1870 × 1940 mm -Four, new, never used, in original packaging -MRe Standard range -Energy: wood + electric sole -Capacity: 10 pizzas Ø30 cm -Productivity: 170 pizzas/h -Electrical power: 8.5 kW -Wood power: 35 kW -Combustion air: 173 m³/h -Flue gas temperature: 110 °C -Rotating hearth with variable speed -Rotating hearth with variable direction -Hearth heated by electric resistors Gksdpfxozlg T So Ak Ujb -Wood-fired oven on the left (standard) -Wood-fired oven on the right (optional) -External ash collection drawer -Inteltouch System touchscreen interface -Dual manual/automatic mode -Three customizable cooking programs -Analog, thermostat-controlled controls (optional) -Sorrentino stone for bread or pizza (upon request) -Exhaust diameter: 250 mm -Mouth width: 650 mm -Net weight: 2250 kg -Key advantages Motorized rotating hearth with variable speed and direction to improve baking uniformity. Electric heating under the hearth to enhance the thermal stability of the baking surface. Capacity of 10 pizzas Ø30 cm, suitable for regular service and peak activity. Lateral wood-fired oven with door, on the left as standard and available on the right as an option. External ash drop and collection drawer to simplify maintenance and preserve baking cleanliness. Inteltouch System touchscreen as standard, with automatic/manual operation and customizable cooking programs. Large natural stone shelf to facilitate baking operations in front of the oven opening.

Condition: new, - Dimensions: 910 x 860 x 550 mm - Internal dimensions: 610 x 610 x 170 mm Gkedpey S R Ipofx Ak Uob - Weight: 51 kg - Power: 8 kW - Power supply: Natural gas + 230V~ electrical connection - Capacity: 4 pizzas with a 30 cm diameter - Professional oven, ideal for pizzerias with high demand - Designed to offer efficiency, safety, and stability - Fast heat-up thanks to its specially designed chamber - Stable temperature even with heavy use (frequent opening and closing) - High-precision safety thermostat for reliable adjustment - Bakery-style door for easy loading and unloading - Natural gas consumption: 0.844 m³/h - Thermal power: 6880 kcal/h

Condition: new, External dimensions: 2300 × 2450 × 2340 mm FGRi series Finish: Mosaic Dome Energy source: wood and gas Total gas power: 43 kW Natural gas consumption: 4.6 m³/h LPG consumption: 3.4 kg/h Gas connection: 3/4” G Capacity: 14 pizzas Ø 30 cm Productivity: 240 pizzas/h Motorized rotating hearth Variable speed and direction Two independent gas burners Separate vault and hearth heating Radiant atmospheric burners Burners designed by Morello Forni High refractory mass Insulation: bricked shell External finish: Mosaic Dome Dual manual/automatic mode Manual mode with flame modulator Analog thermostatic controls (optional) Unassembled shipping: not available Mouth width: 820 mm Net weight: 4000 kg General presentation The FGRi150 Coupole Mosaïque is a hybrid wood & gas rotary oven intended for pizzerias, Italian restaurants, franchises, and catering establishments that want to combine high cooking capacity with an elegant presentation. With its Mosaic Dome finish, it is suitable for locations where the oven is visible and contributes to the image of the concept, while maintaining the performance of the largest FGRi format. Why this model stands out This oven cooks 14 pizzas Ø 30 cm and achieves a stated production of 240 pizzas/h. It can operate on wood alone, gas alone, or in a combined wood + gas mode. Its gas-heated, motorized rotating hearth, with variable speed and direction, helps to distribute cooking over a large surface area. The two independent burners, dedicated to the vault and the rotating cooking surface, promote thermal stability when batches are cooked consecutively. Key advantages High capacity of 14 pizzas Ø 30 cm, suitable for high volumes. Stated production of 240 pizzas/h for peak service times. Godpfx Akjzabf Ts Uokb Hybrid operation: wood alone, gas alone, or wood + gas. Gas-heated rotating hearth for even cooking. Mosaic Dome finish with insulating shell and decorative cladding. External drawer for ash disposal and collection.

Year of construction: 2006, condition: good (used), Description Brand Fimar Model FME 4+4 ID 0069 Status Active Price 800 € + VAT Gjdpfxsd Hzaye Ak Uekb Location Oradea (RO) Professional electric pizza, bread oven - rustic frontal lining - refractory cooking surface - heat insulation by rock wool lining - doors with Pirex inspection glass - pyrometers - interior lighting - 2 thermostats per chamber. POWER: 8,4 kW POWER SUPPLY: 230V/1N/50-60Hz - 230-400V/3-3N/50-60Hz CURRENT: 40A - 15A (230V/1N) (400V/3N) WORKING TEMPERATURE: 50 ÷ 500 °C COOKING CHAMBER DIMENSIONS: 610x610x140h (mm) x2 DIMENSIONS: 900x735x750h (mm) NET WEIGHT: 114 Kg GROSS WEIGHT: 139 Kg ExWorks. Price is negotiable. Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. Hablamos Español. Beszélünk magyarul. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervam dreptul la greseli, modificari si vanzare prealabila.

Year of construction: 2008, condition: like new (used), We sell a package of 26 cooling systems - Alfa Laval brand evaporators, all of which work on the glycol cooling system. The systems are powered at 220V or 380V or have an interchangeable power supply system according to the user's needs. The year of manufacture of the systems is 2008. We can sell also piece by piece not only as a package upon request. Commercial unit coolers designed for use in small and medium cold rooms from 10 up to 400 m³. Models designed for easy maintenance with immediate access to inspection areas. This series is available as a DX evaporator and brine unit cooler. Finned coil - H(C)FC Inner grooved Cu tubing ø 12 mm, triangular tube pitch - Brine Smooth Cu tubing ø 12 mm, triangular tube pitch - Corrugated Alu-fins - Fin spacings 4, 5.5, 6, 7, 8, 10 and 11 mm. • 1 to 4 AC fans, ø 250 mm up to ø 500 mm, drawing through the coil. Fan motors 230V/50-60Hz/1ph or 400V/50-60Hz/3ph in two noise levels (H/L). Motors with dynamically and statically balanced external rotors, manufactured in accordance with VDE 0530/12.84. • Corrosion resistant materials: coil frame AluZinc, casing strong and durable sheet metal, powder-coated RAL 9002. • Hinged drip tray and side covers for easy installation and maintenance. • Sufficient space for mounting of expansion valve inside the casing. • Mounting brackets allow flush ceiling mounting. Gkjdeg N Db Hepfx Ak Uob • Fitted with schräder valve on the suction connection for testing purposes. • Pumped system available on request. • Stickers indicate fan direction and refrigerant in/out. • Delivery in mounting position. Coolers are mounted on wooden beams. Installation can take place with the use of a forklift. 1 AlfaCubic series (BL, GL, RL) 2 Refrigerant system (E = dry expansion, W=water/glycol, 3 Noise level (H=high, L=low) 4 Fan diameter (25=250, 35=350, 40=400, 50=500 mm) 5 Number of fans (1 to 4) 6 No. of tube rows (A=4, B=6, C=8) 7 Phases (S= single-phase, D= 3 phases Δ connection) 8 Motor voltage (230V, 400V) 9 No. of circuits 10 Packing (CR=crate) 11 Casing material (AP= powder coated, SS= stainless steel) 12 Defrost system (A= air, E= electric defrost, HG= hotgas) 13 Fin material/coating (AL=aluminium, EP= epoxy coated aluminium) 14 Fin spacing (4, 5.5, 6, 7, 8, 10 and 11 mm) 15 Tube material (Cu=copper) The evaporator coils of these units are high performance and are built-in 1/2 ”fluted copper tube and fin corrugated aluminium with gaps of 3.5, 6 and 8mm. The frame, made of aluminium sheet, is provided with protection collars. This frame has the application of thermostatic expansion valves. Regarding their exterior structure, they are manufactured in aluminium painted in high resistance RAL-9018 polyester colour. The vibrations in these machines are avoided thanks to the fact that their entire structure is compact and highly rigid. All its parts are easily removable for maintenance. These evaporators are fitted as standard with helical fans with high-performance protection grilles and are equipped with 315 or 350mm motors. diameter. Single-phase for 230V 50Hz, with a degree of protection IP-54, with external rotor and low consumption. All motors are connected to a watertight general box, according to IP-55 regulations. Finally, defrosting is carried out with 230V electric heaters built in armoured stainless steel tubes. Its vulcanized ends avoid derivations and are inserted inside the battery and the tray. They are connected to a watertight junction box. Application: Lo

Year of construction: 2024, condition: used, functionality: fully functional, The electric double fryer with a capacity of 14 + 14 liters and a cabinet base, model Z7FREH2E00, is an excellent choice for professional kitchens or markets. The unit features high performance and enables the simultaneous frying of large quantities of food. This double fryer is specifically designed for intensive use in catering establishments or high-traffic TO GO sales outlets. You will receive an invoice with VAT shown. Technical data: Dimensions in mm: external (W x D x H): 800 x 720 x 942 Tank (W x D x H): 240 x 380 x 285 Cabinet (W x D x H): 680 x 640 x 420 Model designation: Z7FREH2E00 Serial number: 4082149208 Performance data: Tank: 2 x 12-14 liters Connection value: Electric: 17.4 kW / 3N / 400 V Temperature specifications: Operating temperature: 105 to 185 °C Weight specifications: Gross weight: 83 kg, Net weight: 81 kg Year of manufacture: 2024 Condition: Used, fully functional (operated for 2 weeks) Equipment: Electric fryer as a stand-alone unit with 2 directly heated standard tanks, each with a capacity of 14 liters 1.5 mm thick front and top plate made of CNS, side and rear panels made of stainless steel, Scotch-Brite finish, edges rounded on both sides Standard tank with directly heated, internal heating elements Operating temperature from 105 - 185 °C, thermostatically adjustable Filling volumes: min / max: 12 / 14 l per tank Height-adjustable feet (+50 mm) Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs High-quality brand-name equipment at fair prices Professional overhaul / inspection & expert cleaning Tested & fully functional - or money back Shipping or self-collection can be flexibly selected Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 Gksdpfxjzvavze Ak Uob Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have questions, would you like a consultation, or would you like to see something on-site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is made exclusively subject to our general terms and conditions (GTC).

Year of construction: 2019, condition: used, functionality: fully functional, This is a tilting frying pan from the premium manufacturer MKN, type Optima 850 Gas 3/1 GN with motor-assisted tilting. The unit has undergone a comprehensive inspection in our in-house workshop and is fully functional, with a 6-month warranty on all electrical components. The tilting frying pan is in good used condition, free of defects, and is mounted on legs. If required, the legs can be removed so that the unit can also be mounted on a plinth. The manufacturer's list price is €29,140 net. Our price: €8,226.89 net = €9,790 gross. You will receive an invoice with VAT shown. Our used equipment service for you: * 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. * High-quality branded equipment at fair prices. * Professional overhaul/inspection and expert cleaning. * Tested & fully functional - or your money back. * Flexible shipping or self-collection options. * Competent advice - before and after purchase. * Provision of operating instructions, connection diagrams & spare parts. * Inspection according to DGUV V3. Technical data: * W x D x H: approx. 1600 x 850 x 850 mm (without legs 700 mm) Gjdpozu Rpvofx Ak Uekb * Pan interior dimensions: 1020 x 540 x 210 mm deep * Power connection: V: 220-240 / kW: 17 * Type: 10019153 * Serial number: 19207555 * Year of manufacture: 2019 * Nominal capacity / Usable capacity: 116 / 94 liters Condition: Used, comprehensively inspected, fully functional. Further details: * Optimized nominal capacity: 116 liters * Usable capacity: 94 liters * The front-mounted pivot point of the pan and the shape of the pouring opening prevent the pouring stream from wandering and scattering, guaranteeing complete emptying. * 55 mm cleaning gap between the pan and the side frame. * Standard equipment includes a double-walled hinged lid and mixing tap. * The pan base is made of a special sandwich material as standard for even heat distribution. * Thermostatic temperature control. Shipping: * Delivery or self-collection by arrangement. * Worldwide shipping on request. * Shipping to islands or mountain stations only by arrangement. Subject to changes and errors. Do you have any questions, would you like to receive advice, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday to Friday, 9:00 a.m. to 1:00 p.m. and 2:00 p.m. to 5:00 p.m. Sales are exclusively subject to our general terms and conditions (GTC).

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers Gkodpfx Akezu Aibo Usb - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: excellent (used), Huber Unichiller 020Tw-H Recirculating Chiller / Thermostat Manufacturer: Peter Huber Kältemaschinenbau Model: Unichiller 020Tw-H Type: UC020Tw-H Temperature range: -20 to +100 °C Device type: Water-cooled recirculating chiller / thermostat For sale is a used Huber Unichiller 020Tw-H with Pilot ONE touchscreen control. The thermostat is designed for externally closed temperature control circuits and is suitable for precise cooling and temperature control of machines, industrial plants, test benches, laboratory applications, and process circuits. Technical data: Temperature range: -20 to +100 °C Temperature control / display: 5.7" color touchscreen Controller: Huber Pilot ONE Internal temperature sensor: Pt100 Connection for external sensor: Pt100 Temperature stability at -10 °C: 0.2 K Heating capacity: 2 kW Cooling capacity at +15 °C: 2 kW Cooling capacity at 0 °C: 2 kW Cooling capacity at -10 °C: 1.5 kW Cooling capacity at -20 °C: 0.8 kW Circulation pump: Type B Max. flow rate: 25 l/min Max. delivery pressure: 3 bar Flow rate at 0.33 bar: 22 l/min Flow rate at 0.5 bar: 20 l/min Flow rate at 1.0 bar: 17 l/min Flow rate at 2.0 bar: 10 l/min Flow rate at 3.0 bar: 5 l/min Pump connection: G3/4 male Cooling water connection: G1/2 male Min. cooling water differential pressure: 1 bar Max. cooling water pressure: 6 bar Min. filling volume: 2.5 l Expansion volume: 4 l Refrigeration unit: water-cooled Refrigerant according to nameplate: R507 Refrigerant quantity according to nameplate: 0.57 kg Max. operating pressure according to nameplate: 25 bar Power connection: 230 V / 1~ / 50 Hz Max. current consumption according to nameplate: 15.5 A Protection class: IP20 Sound pressure level: approx. 60 dB(A) Dimensions: Width: approx. 400 mm Depth: approx. 440 mm Height: approx. 1230 mm Weight: approx. 141 kg Equipment: Huber Pilot ONE 5.7" color touchscreen Water-cooled refrigeration unit Stainless steel circulation pump Atmospherically open expansion tank Digital level indicator Adjustable over-temperature protection according to DIN 12876 USB interface Ethernet interface RS232 interface Connection for external Pt100 sensor Main switch Mobile stainless steel housing Accessories according to pictures Shipping data: Machine weight: approx. 141 kg Machine dimensions: approx. 400 × 440 × 1230 mm (W × D × H) Shipping by freight forwarder possible. Condition: Used Optical condition according to pictures Godpfx Akjzukkgs Uokb Scope of delivery: 1 × Huber Unichiller 020Tw-H recirculating chiller / thermostat Accessories according to pictures The unit is available for immediate delivery. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: new, power: 140 kW (190.35 HP), fuel type: diesel, color: white, gearing type: automatic, number of seats: 23, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Sprinter 519 Lord Comfort – 517 version with glass roof available upon request Vehicles are equipped with the new GSR2 and GSR3 systems (mandatory): For example: - Driver comfort package - Reversing camera - Blind spot assist - Turn assist - MBUX 10" (radio with Bluetooth, CarPlay, touchscreen) - Tire pressure sensors - Attention assist - Active lane keeping assistant - Start information assistant - Intelligent speed assistant - Distance assistant - Rain sensor - Electrically adjustable exterior mirrors - Adaptive cruise control Equipment package Original Mercedes: - Front air conditioning - Auxiliary heater - Air-suspended driver’s seat with heating - PDC front and rear, front camera / reversing camera - Fog lights - 9-speed automatic transmission 519 additionally includes LED headlights. - Rear extension 500 mm, total length 7,836 mm - Thermal and acoustic insulation - Extra large panoramic windows inside and out, double-glazed - Panoramic driver’s window with electric sunblind - Glass roof - 19 sleeper seats + guide seat - Total capacity 20 incl. driver - Webasto / Diavia 12 kW rooftop passenger air conditioner - Multi-stage night lighting: white/orange/blue - Convector heating left and right in passenger compartment, thermostat controlled - Electric exterior swing door - Sleeper seats with 3-point seat belts, magazine net - Double glazing, black tinted - Side walls and ceiling trimmed with fabric and faux leather (no simple ABS or bare metal interior) - All attachments painted in vehicle color - Passenger compartment clock - USB ports at every seating row - Overhead channels left and right with luggage racks and service sets incl. reading lamps, speakers - Half podium - Lowered, sliding rear luggage compartment for last row - Refrigerator Gjdpozvxnijfx Ak Uskb - Optional: hubcaps Gerflor wood-look flooring Net export possible. We make shipment worldwide. Price 517 silver: €112,990.00 Price 519 white: €114,990.00

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, overall weight: 12,000 kg, input voltage: 415 V, input current: 70 A, input frequency: 50 Hz, Complete 2010 Rademaker Pie Line, capable of producing up to 5,280 filled savoury pies (with lids) per hour. Manufacturer - Rademaker B.V. Maximum mechanical speed – up to 22 strokes / minute. Output capacity – up to 5,280 pies / hour. Electrical requirements – 415 V / 50 hz / 3 phase. Godpfx Akjzvmy Hs Uokb Power – 70 Amps (approx.). Weight of complete line – 12,000 kg. This production line comprises of the following equipment/machinery: 1. 2 x sets of tooling complete with trollies, one set for pies with casing diameter of 110mm. 2. Electrical control panel (with data plate ‘PIE LINE’ on). 3. Inclined flighted conveyor for loading of pastry sheets. 4. Overhead transfer conveyor (used to feed 'STRIPFEEDER') operating at 2.4m high along the length of the line. 5. Rademaker ‘STRIPFEEDER’ with denester for dropping pie cases. 6. Rademaker Tamping unit 1 (used to tamp the dough round into the pie casing). 7. Rademaker ‘DEPOSITOR’ 6-lane depositing system with hopper and pump. 8. Rademaker ‘TAMPING UNIT’ 2 for tamping filling down into casings. 9. Rademaker ‘LID DOUGH CONVEYOR’ for dropping lids onto filled pies. 10. Dutch Thermal Engineering b.v. (DTE) V-009.0 thermostat for regulating temperature of water bath sat under main conveyor holding pie casings. 11. Rademaker Crimping unit / marking unit for putting pattern into casing lid and ensuring it is secured onto pie. 12. Rademaker Pie exit/discharge conveyor. 13. Rademaker ‘DOUGH RETURN SYSTEM’ for excess pastry. 14. Rademaker ‘SPOT DEPOSITOR’ for 5-across over line depositing. 15. Unnamed egg-glaze mixing vessel and pump, mounted on mobile frame. NOTES – BUYER TO REMOVE FROM SITE.

Year of construction: 2025, condition: as good as new (ex-display), ECOPRESS 102 is an automatic hot mounting press with an electro-hydraulic pressure system and therefore does not require a separate compressed air connection. The working pressure reaches up to 300 bars and an embedding temperature up to max. 200°C. The mounting time can be set up to 60 minutes. The automatic process results in short cycle times: thermostatically controlled heating and cooling times, heating output of 1650 W, automatic cooling cycle. Mounting cylinders and pistons with diameters of 25, 30, 40, 50 mm (and inch) are available. The end of the embedding sequence is signaled acoustically by the device. The delivery is made ready for operation (incl. To be ordered separately Mounting cylinder with piston and intermediate piston for 2 mountings), required power supply: 230V / 50 Hz, 1 phase (220V), water inlet, water outlet, delivery included Test equipment consumables consisting of: • 5 x 1 kg (5 kg) different investment materials • 1650 watt heating power • up to 200 ° C embedding temperature Gedpecwamxofx Ak Uokb • Embedding time adjustable up to 60 minutes • automatic cooling cycle • no compressed air required • 12 month warranty Delivery by forwarding agent to the factory in Germany (Optional installation by our technicians on site)

Condition: excellent (used), functionality: fully functional, tank capacity: 120,500 l, total height: 20,000 mm, inner diameter: 3,000 mm, outer diameter: 3,300 mm, wall material: stainless steel, wall structure: single-walled, number of chambers: 1, operating temperature: 20 °C, operating pressure: 3 bar, Stainless steel pressure vessel, vertical, insulated Technical data / Dimensions Available quantity: 8 Volume: approx. 120,000 liters Vessel type: Pressure vessel Condition: used Food-grade: yes Design: vertical Internal diameter: approx. 3,000 mm External diameter: approx. 3,300 mm Overall height: approx. 20,000 mm Specific gravity of the medium: 10.00 t/m³ Operating pressure: Overpressure Operating overpressure: 3.00 bar Wall thickness, bottom: approx. 6.0 mm Wall thickness, top: approx. 4.5 mm Wall thickness, shell / cylinder: approx. 3.5-5 mm Operating temperature: 20°C Material / Properties Material, inner shell: Stainless steel Material grade: V2A-1.4301 (AISI 304) External surface: Ground, welded seams passivated Welded seams, internally ground: Yes Insulation Insulation present Godezvh Dtepfx Ak Uskb Insulation thickness: approx. 120 mm Insulation material: Mineral wool Material, insulation jacket: Aluminum Insulation jacket: Trapezoidal sheet Equipment Base type: Foot ring / base ring Quantity: 1 Mounting: fixed Bottom type, top: Dished end Bottom type, bottom: Dished end Top: 1 x Insulated dome DN 900 1 x Access opening with dome cover DN600 1 x Valve dome cover with the following connections: 1 x Cleaning-ventilation-valve combination (RLV) DN 50 1 x Vacuum valve, spring-loaded with 2 heating elements and thermostat 1 x Safety valve 1 x Burst disc 1 x Thread DN 50 for probe Shell: 1 x Condensate pipe DN 25 1 x Cable protection pipe DN 32 1 x CIP pipe DN 50 1 x Base ring made of Cr-Ni steel (1.4301) with access opening 600 x 600 1 x Spray pipe with protruding ball head Bottom: 1 x Outlet cup DN 300 1 x Outlet with cover cap, chain, and eyelet DN 80 1 x Connection fitting for sampling tap DN10 Documentation Drawing Inspection log Inspection certificate

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors, Smooth exterior walls, badge_isoboden Equipment: - Welded frame - 40mm insulated wall - Insulated floor Net: €7,302.52 / Gross: €8,690.00 Article number: SPK113251315.01 Technical data: • Brand: Hapert Trailers • Model: Sapphire L-1 Cool • Vehicle type: Refrigerated trailer Godezu N R Sepfx Ak Uokb • Vehicle condition: New • First registration: No first registration • TÜV/HU: 2 years from first registration • Internal dimensions (LxWxH): 250 x 130 x 150 cm • External dimensions (LxWxH): 385 x 178 x 208 cm • Loading height of the floor: 54 cm • Permissible total weight: 1,350 kg • Unladen weight: 549 kg • Payload: 801 kg • Chassis: Low-bed trailer (wheels next to the body) • Tires: 185R14C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Walls made of sandwich panels, 40mm insulated with gel-coat coating • Roof and floor 40mm insulating panels with a polyester coating • Reinforced, sturdy, bolted V-drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized • Many cross members, resulting in high point load capacity • Longitudinal members continuous • Frame is very torsion-resistant due to its stable design • Refrigeration unit Arctic 1600 N • Cooling capacity 1800 watts at a refrigeration room temperature of +6° C and an ambient temperature of 30° C • Temperature control range from +2° C to +10° C • Air volume flow evaporator: 750 m³ • Completely encapsulated unit with "outdoor" housing, mounted at the front on top • Environmentally friendly, CFC-free refrigerant • Electronic automatic defrost function of the evaporator • The control display is lockable and thus protected against unauthorized operation • Electronic digital thermostat for optimal regulation of the temperature range • 230 Volt interior lighting • 2-leaf rear door with stainless steel rotary latch, lockable • 2x maneuvering handles at the front • Maintenance-free rubber spring axle from KNOTT • Automatic reversing function • KNOTT overrun device and parking brake • Very stable, bolted V-drawbar • 13-pole plug • Reversing light • Large-dimensioned safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to inquire about your specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for immediate delivery! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors, smooth exterior walls, badge_isoboden Equipment: -Welded frame -40mm Iso wall -Iso floor Net: €9,924.37 / Gross: €11,810.00 Article number: SPK227301518.01 Technical data: • Brand: Hapert Trailers • Model: Sapphire L-2 Cool • Vehicle type: Refrigerated trailer Gsdozu N S Aspfx Ak Uskb • Vehicle condition: New vehicle • First registration: without first registration • TÜV/HU: 2 years from first registration • Internal dimensions (L x W x H): 296 x 145 x 180 cm • External dimensions (L x W x H): 435 x 198 x 238 cm • Loading height of the floor: 54 cm • Permissible total weight: 2,700 kg • Tare weight: 740 kg • Payload: 1,960 kg • Chassis: Low-loader (wheels next to the body) • Tires: 185R14C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Walls made of sandwich panels, 40mm insulated with gel coat coating • Roof and floor 40 mm insulating panels with a polyester coating • Reinforced, sturdy, bolted V-drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized • Numerous cross members, resulting in high point load capacity • Longitudinal members continuous • Frame very torsionally rigid due to its stable design • Cooling unit Arctic 1600 N • Cooling capacity 1800 watts at a refrigeration room temperature of +6° C and an ambient temperature of 30° C • Temperature control range from +2° C to +10° C • Air volume flow evaporator: 750 m³ • Completely encapsulated unit with "outdoor" housing mounted on the front at the top • Environmentally friendly, CFC-free refrigerant • Electronic defrost system for the evaporator • The control display is lockable and thus protected against unauthorized operation • Electronic digital thermostat for optimal control of the temperature range • 230-volt interior lighting • 2-wing rear door with stainless steel twist handle, lockable • 2x maneuvering handles at the front • Maintenance-free rubber spring axles from KNOTT • Automatic reverse drive • KNOTT overrun device and parking brake • Very stable, bolted V-drawbar • 13-pole plug • Reversing lights • Large-dimensioned safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to inquire about special requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or temporary registration plates (Germany) can be provided. - Export registration plates including customs declaration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Errors, omissions and prior sale excepted -

Condition: new, functionality: fully functional, operating pressure: 200 bar, high-pressure hose length: 10,000 mm, empty load weight: 43 kg, fuel: super 95, warranty duration: 24 months, Technical specifications: Pump capacity (l/h) 700 Operating pressure (bar) 200 Maximum pressure (bar) 250 Water connection R 3/4″ Drive type: Gasoline Engine type: G210FA High mobility Color: Anthracite Weight with accessories (kg) 43 Dimensions (L x W x H) (mm) 878 x 538 x 702 Scope of delivery: Kärcher Classic spray gun - M22 thread High-pressure hose: 10m Kärcher Classic lance 850mm Power nozzle 25° Water filter Equipment: Protective frame Crankshaft pump with ceramic piston Gedpfew Exv Iex Ak Uekb Independence: Independence from external power sources. Complies with EU Stage V emissions standards. Convenient manual start. High mobility: Large inflatable wheels for comfortable operation on difficult terrain. The compact and small device is very easy to maneuver even in tight spaces. Fits in a car. Solid and durable device: The sturdy tubular construction protects the pump from damage. A thermal valve protects the pump from overheating during circulation mode. A crankshaft pump with ceramic pistons. The compact Kärcher HD 7/20 G Classic high-pressure cleaner without water heating is the ideal choice for beginners using gasoline-powered devices. The device can be easily transported in a car and enables the successful completion of even the most demanding cleaning tasks, for example, on a construction site or in municipal areas. The device offers a working pressure of up to 200 bar and is equipped with a durable crankshaft pump and a pumping capacity of 700 liters per hour. An integrated gasoline engine (EU STAGE V), which allows the device to operate independently of external power sources, inflatable wheels that ensure the necessary mobility on site, an ergonomic handle for easy transport, and practical storage space for accessories ensure user-friendly operation. Important parts are easily accessible for maintenance and effectively protected by thermostatic and safety valves. The HD 7/20 G Classic's sturdy steel frame also prevents external and mechanical damage. The unit does not have the ability to draw water from alternative sources.

Condition: new, functionality: fully functional, operating pressure: 250 bar, high-pressure hose length: 10,000 mm, fuel: super 95, overall weight: 56 kg, warranty duration: 24 months, Technical specifications: Pump capacity (l/h) 900 Operating pressure (bar) 250 Maximum pressure (bar) 300 Water connection R 3/4" Power type: Gasoline Engine type: G390FA High mobility Color: Anthracite Weight with accessories (kg) 56.8 Dimensions (L x W x H) (mm) 878 x 538 x 702 Gkedpewiwv Isfx Ak Ueb Included: Spray gun High-pressure hose length: 10 m Power nozzle Water filter Equipment: Protective frame Crankshaft pump with ceramic piston Independence: Independence from external power sources. Complies with EU Stage V emissions standards. Convenient hand start. High mobility: Large inflatable wheels for comfort on difficult terrain. The compact and small unit is very easy to maneuver even in tight spaces. Fits in a car. Solid and durable device: The sturdy tubular construction protects the pump from damage. A thermal valve protects the pump from overheating during circulation. A crankshaft pump with ceramic pistons. The compact Kärcher HD 9/25 G Classic high-pressure cleaner without water heating is the ideal choice for those new to using gasoline-powered devices. The device is very easy to transport in a car and enables the successful completion of even the most demanding cleaning tasks, for example, on a construction site or in municipal areas. The device offers a working pressure of up to 250 bar and is equipped with a durable crankshaft pump and a pumping capacity of 900 liters per hour. User-friendly operation is ensured by an integrated gasoline engine (EU STAGE V), which allows the device to operate independently of external power sources. Inflatable wheels ensure the necessary mobility on site, an ergonomic handle for easy transport, and practical storage space for accessories. Important parts are easily accessible for maintenance and effectively protected by thermostatic and safety valves. The HD 9/25 G Classic's sturdy steel frame also prevents external and mechanical damage. The device does not have the ability to draw water from alternative sources.

Condition: good (used), functionality: fully functional, input voltage: 400 V, year of last overhaul: 2023, type of input current: three-phase, Tabletop frying unit Jufeba TK-T 05 Gedpfx Aozrrqpok Ujkb Removal device: manual Temperature controller with safety thermostat Steam cover and 2 immersion baskets Stainless steel design, tabletop unit Connection: 400V, 16A-CEE plug Used unit Visit our large showroom!

Year of construction: 2026, condition: new, functionality: fully functional, total length: 200 mm, total width: 500 mm, total height: 1,700 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 09/2027, type of input current: three-phase, machine/vehicle number: 2026, Air conditioner / proofer air conditioner NEW Lillnord Model: PG 1000 Powerful with sophisticated technology for all fermentation rooms up to 6 sqm Gjdpfx Akefvvnmo Uskb Temperature range +20 to 45 ° C adjustable via thermostat Humidity range 60 to 95% R.H. adjustable via hygrostat Automatic water regulation long lifetime! thanks to the proven "Lillnord system" Dimensions: 500 x 200 x 1700 mm, WxDxH DGUV V3 tested Connection 400V, 6.5 kW, 16A-CEE plug NEW device with 12 months warranty Come to our large bakery machine warehouse!

Condition: like new (used), functionality: fully functional, machine/vehicle number: 2026, Tempering unit Thermo Quick Duo Tempering unit for couverture Model: Thermo-Quick Duo with 2 removable bowls Temperature control via thermostat (70°C) Connection: 230 V Dimensions: 760 x 410 x 240 mm (W x D x H) Gkjdpfx Aozq U E Hsk Ujb Used unit, cleaned with warranty + spare parts service

Condition: ready for operation (used), Year of construction: 1965, Embossing pressure: 8000kg, embossing area X/Y: approx. 220mm/310mm, speed: 33rpm, table adjustment: 90mm. Equipment: 2 foil feeds, thermostat, automatic operation with timer for loading time, central lubrication, hand guard, continuously adjustable embossing time, several mounting plates. An on-site inspection is possible. Gsdpfx Aezukthsk Uskb