Used Branson Hp 25/15-1 for sale (89,621)

Condition: reconditioned (used), modernized machine with new LTG-StoreControl P control system External dimensions: Overall height 6,010 mm Overall width 3,501 mm Overall depth 1,774 mm 25 carriers, each with a load capacity of 628 kg in the clear internal dimensions: H = 359 mm W = 2,880 mm D = 628 mm Chain pitch 406 mm Deposit table at 1,000 mm above floor level, with work surface / plastic surface Itjdpfxehfxkao Ahben Color: light gray, surface cleaned, signs of wear possible Motor power, drive: 1 x 5.5 kW / 400 Volt Additional extras: automatic chain tensioning, various intermediate shelves, subject to errors and technical changes Delivery and assembly currently mainly in Germany, Austria and several neighboring countries.

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement Iedpfx Aheuxfu Njbjtn - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: good (used), Year of construction: 1991, Used Darley press brake Type EHP 50 20 15 Capacity 2050 x 50 tons Delem control system Isdpfxsz N Exgs Ahbjtn Y1, Y2, and X-axis CNC Includes a set of tooling

Condition: used, Year of construction: 2002, machine/vehicle number: 10857, Pressure total: 315 ton Stroke: 1100 mm Daylight: 2200 mm Table surface area : 2500 x 1000 mm Slide area: 2500 x 1000 mm Die weight at the ram max.: 6000 kg Approach speed: 600 mm / sec Working speed: 32 - 230 mm / sec Return speed: 600 mm / sec Required power: 158 kW Weight of machine approx.: 44 ton Iedpfsvmfzbex Ahbetn Height over floor approx.: 6175 mm Automation

Condition: used, Year of construction: 2016, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: kom 4892, Set of dryer equipment, including: Itedpfxjxa Drho Ahbjn Loading bunker Oversize vibrating screen Chain conveyor to dryer Belt dryer Chain conveyors from dryer Vibration separator

Condition: excellent (used), Year of construction: 1978, Description to follow! Itjdpfxozl E R Ao Ahbon

Condition: good (used), functionality: fully functional, roll diameter: 25 mm, roll width: 25 mm, roll pitch: 28 mm, total width: 35 mm, total height: 35 mm, total length: 2,475 mm, conveying length: 2,475 mm, construction width: 35 mm, construction height: 35 mm, Item sold as a bundle of 100 pieces. TAF item number: 1000004157 Manufacturer: unknown Year of manufacture: unknown Overall dimensions (LxWxH) in mm: approx. 2,475 x 35 x 35 Side width in mm: 35 Side height in mm: 25 Conveyor length in mm: 2,475 Conveyor width in mm: 25 Roller type: plastic Rollers per axle: 1 piece Roller pitch in mm: 28 Roller diameter in mm: 25 Drive: gravity Weight in kg: 1.85 Condition: used / fully functional Itjdpfx Aoxrt Hfehben Function test: OK

Condition: excellent (used), Year of construction: 2021, operating hours: 21,000,575 h, functionality: fully functional, machine/vehicle number: 21000575, Peristaltic pump ALLMOVE ASH 15 GN-ID/1, year 2021, serial number: 21000575, very good condition Peristaltic pumps of the ASH series from Allweiler have a unique design that allows them to work with the most complex liquid media. They are capable of pumping almost any fluid or very viscous substances, including aggressive agents or flows contaminated with solid or fibrous inclusions. Pumps of this type are widely in demand in many industries as an effective and reliable means of transporting liquids of various natures. The working unit is based on the following design elements: a thick-walled elastic hose for conducting liquids and a rotor with a shoe for pressing and pushing the flow. With this pumping principle, there is no turbulence or emulsification of liquids. Self-priming units are easy to set up and install, with the possibility of reversible operation. Sealing of the drive with a sealing ring. The cooling agent is located directly in the pump body. Pumping liquids: highly viscous substances, containing abrasive, solid particles or fibres, gas-containing, aggressive agents. Application areas: wastewater treatment, chemical industry, paper production, food industry, agriculture, etc. Characteristics of ALLMOVE ASH 15 GN-ID • Volumetric flow: up to 60 m³/hour; • Supply pressure (PD): up to 16 bar; • Differential pressure: up to 15 bar; • Liquid viscosity: up to 100,000 mm²/s; • Permissible sizes of solid particles: 5 - 33 mm; • Permissible fiber length: 150 - 820 mm; • Liquid temperature: up to 80 °C; • Installation: dry, horizontal, on a support plate. Price Euro 2.900 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Itsdpswhmm Hefx Ahbsn Subject to errors, changes, and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabilă. We speak English. / Wir sprechen Deutsch. / Beszélünk magyarul. / Nous parlons français/Vorbim romana

Year of construction: 1990, condition: excellent (used), functionality: fully functional, Reifenhäuser extruder Type: RH 51-1-35-25 5.6 kW DC motor 103 rpm 500 bar melt pressure sensor 3 zone screw 35-25d fully functional You are welcome to view this (and other) extruders Itjdewxvadopfx Ahben at our warehouse in Königswinter The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned.

Condition: new, Year of construction: 2025, Horizontal packaging machine, MINI VERSION, for premade doypacks, block bottom pouches, flat pouches. Modules for specific pouch properties such as zipper, spout, gusset shape can be integrated, optional: batch/date printer, gassing module. Bag detectors checking the correct placement and complete opening of the doypack. The product infeed chute allows immediate pouch filling after the pouch is detected and keeps the sealing area free from contamination at the same time. A special gripper system ensures the right position of the doypack during the filling process before the bag is closed and sealed. MITSUBISHI PLC, SMC vacuum filter, OMRON PID temperature control, AIRTAC-cylinder. - Specifications: stainless steel version (SS304); max. speed of the machine in neutral: 7 cycles/minute; bag width: 100-300mm; bag length: 100-350mm; compressed air: 0.2m³/min, 6.5bar; power: 220V, 1kW, 1 phase; dimensions of the machine: L1754xW510xH1617mm. Isdjv Nlllepfx Ahbjtn Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 2,800 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 3,000 rpm, number of slots in tool magazine: 120, number of axes: 3, This 3-axis Mandelli RS1500 U25 was manufactured in 2009. It features an impressive X-axis travel of 2,800 mm, Y-axis travel of 1,500 mm, and Z-axis travel of 1,500 mm. The machine has a tool capacity of 120 tools and operates at a maximum spindle speed of 3,000 rpm. If you are looking to get high-quality machining capabilities, consider the Mandelli RS1500 U25 horizontal machining centre we have for sale. Contact us for further details. • Pallet system: 2 pallets • CNC control: Plasma WIN • Notes: Manufactured by MANDELLI; commercialized/maintained by SAMU. This listing is the 2‑pallet version; a 5‑pallet variant exists but is not included. Technical Specification Iodpfx Ahjz Stadobjtn Taper Size ISO 50

Condition: used, functionality: unexamined, Optronis Cyclone-25-150-M – Industrial High-Speed Camera For sale is an Optronis Cyclone-25-150-M, a high-quality industrial high-speed camera for professional applications. The camera features a 25-megapixel sensor with 5,120 × 5,120 pixels and enables recordings with up to 150 frames per second. Thanks to its global shutter, it is particularly suitable for capturing and analyzing fast-moving objects without motion distortion. Technical features: Model: Optronis Cyclone-25-150-M Resolution: 25 megapixels Sensor resolution: 5,120 × 5,120 pixels Frame rate: up to 150 frames/second Type: Monochrome / Black and White Global shutter Interface: CoaXPress Professional industrial camera / Machine vision Suitable for applications such as industrial image processing, quality control, metrology, research, automation, and high-speed imaging. Itsdpfx Ahezwcmxebon Sold as a used item. Please refer to the photos and description for the condition and scope of delivery.

Condition: new, ALTENDORF F 25 sliding table saw, type 1 -Exhibition machine- Double roller carriage swiveling man. Height and swivel adjustment Rip fence with man. fine adjustment Angular mitre fence Large extraction hood Basic scoring unit with LED lighting Itsdju R S Dbepfx Ahbjn ----- Technical data ----- Swivel range: 0 - 46 ° Carriage length: 3,200 mm Rip fence: 1,000 mm Cutting height: 100 mm Max. saw blade Ø: 315 mm Crosscut fence extendable up to: 3,450 mm Speeds: 3,600 / 4,200 rpm Motor power: 5.5 kW (7.5 hp) Work table height: 880 mm Suction nozzle Ø: 120 + 80 mm - new exhibition machine -

Condition: like new (used), Year of construction: 2024, functionality: fully functional, load capacity: 25 kg, arm reach: 1,500 mm, For sale is a Doosan Robotics H2515. Isdjz Hm I Ajpfx Ahbetn The robot was purchased in October 2024 and is being sold due to the closure of the business. The robot is in new condition and has not yet been used. Reach: 1,500 mm Payload: 25 kg Repeatability: 0.1 mm Weight: 72 kg An inspection or collection is possible by prior arrangement.

Condition: good (used), Year of construction: 1993, Press force: 150 t Bending length: 3550 mm Distance between uprights: 3050 mm Control system: Cybelec DNC 880S Stroke: 700 mm Overhang: 350 mm Machine weight (approx.): approx. 15,000 kg Machine height: 3900 mm Accessories/Equipment: - Bending aid positioned in front of the machine - Parking space for the bending aid - 3 stop fingers Itodsgz S S Sspfx Ahben

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1987, machine/vehicle number: 40260, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, working width: 3,150 mm, cutting angle (max.): 2 °, stroke rate (min.): 1 1/min, stroke rate (max.): 25 1/min, sheet thickness (max.): 25 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 18 mm, back gauge adjustment: manual, back gauge: 1,000 mm, input voltage: 380 V, input current: 93 A, type of input current: three-phase, control voltage: 110 V, overall weight: 42,100 kg, total length: 5,040 mm, total width: 3,150 mm, total height: 3,600 mm, table width: 3,250 mm, Equipment: centralized greasing system, documentation/manual, finger protection, foot remote control, type plate available, Used ERFURT ScTP 25/3150 hydraulic guillotine for sale, manufactured by VEB Kombinat Umformtechnik Erfurt, Germany / GDR. Iedpfszh Dtzsx Ahbstn The machine is in working condition and is located at an HMC production facility in Plovdiv. Complete technical documentation is available in German and Russian – passport, acceptance reports, electrical reports, electrical diagrams, technical drawings, and a transportation specification. Key data: Maximum cutting length: 3150 mm. Maximum cutting thickness: 25 mm for St 42 / 42–52 kp/mm². Capacity for St 50 – 23 mm, for St 60 – 21 mm, for St 70 – 19 mm. Cutting angle: 2.5°. Distance between columns: 3250 mm. Rear stop adjustable up to 1000 mm. Main motor: 40 kW, connected power: 42 kW. Power supply: 3 × 380 V, 50 Hz. Machine number according to the nameplate: 40260. The machine features conventional electromechanical control, a hydraulic clamping system, a cutting line indicator, an electrically and manually adjustable rear stop, four-edge cutting blades, and an electrical cabinet. Net weight according to the transportation specification: 41,500 kg. Gross weight: 42,100 kg. Dimensions of the main machine body: 5040 × 3040 × 2970 mm. Price: negotiable. Location: Plovdiv, Bulgaria. Inspection by prior arrangement.

Condition: like new (used), Vacuum filler Continuous vacuum filler for straight filling and portioning Machine features: All-in-one 250 l hopper with counter arm and reinforced scraper, tipping aid and hopper lock Integrated vacuum pump Double screw Standard double screw housing Control: RS Machine dimensions in cm: Width: 134.0 Length: 220.0 Height: 200.0 Itsdpfjv Sq E Nex Ahbsn Power: 17.0 kW Voltage: 380 V, 50 Hz Weight: 1300 kg VEMAG lifting and tipping device for HPC with 250 l hopper To fit standard trolley, 200 l capacity

Condition: good (used), Year of construction: 2010, Ref. no.: 18637 Manufacturer: BUSCH Type: MM 1252 AV (15 Stück) Year of construction: 2010 Further information: Make | Model | Year | Capacity | Frequency | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Iodpjy Tlcwjfx Ahbetn Busch Mink MM 1252 AV | 2009 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2010 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | BUSCH MINK MM 1252 AV VACUUM PUMPS A total of 15 units Busch Mink MM 1252 AV industrial vacuum pumps are available for sale. The pumps were removed from a running production line and are generally in clean and good cosmetic condition. These high-quality Busch MINK series pumps are widely used in plastics injection molding, central vacuum systems, packaging and automation applications. TECHNICAL SPECIFICATIONS • Manufacturer: Busch • Model: MINK MM 1252 AV • Technology: Dry Claw / Oil-Free Vacuum Technology • Capacity: 250 – 300 m³/h • Final Vacuum: 100 hPa (0.1 bar) • Frequency: 50/60 Hz • Year of Manufacture: 2009 / 2010 • Origin: Germany MAIN ADVANTAGES • Oil-free operating system • Low maintenance costs • Energy-efficient operation • Quiet and reliable performance • Suitable for continuous industrial operation • High Busch quality with worldwide service support APPLICATION AREAS • Plastic injection molding machines • Central vacuum systems • Packaging machines • Thermoforming systems • Automation and conveying systems • Industrial production facilities

Condition: ready for operation (used), * Brand: Främbs & Freudenberg * Type: banana-screen * Surface: 4000 x 1500 mm - 1 Deck * incl.: Discharge Chute, Support and PU-steel Screens, * Incl.: Springs, Motor and MotorSupport Itodpsywl Stofx Ahbsn

Condition: new, Technical data: Saw blade diameter: 500 mm Automatic saw feed Max cutting height: 120 mm Table length: 2540 mm Table width: 360 mm Table with 8 built-in rollers Roller diameter: 60 mm Mitre cutting capability: NO Power supply: 400 V Motor power: 5.5 kW Overall dimensions: Length: 2540 mm Itodpfewya Hqox Ahben Width: 900 mm Height: 1340 mm

Condition: used, grinding diameter 450 mm grinding length 1000 mm centre height 225 mm Fotos von bereits gelieferten Maschinen. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -FANUC Steuerung mit BLUE-SOLUTION -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Fotos von bereits gelieferter Maschine mit anderen Optionen. Schleikopfvariante UR/RS: -Schleifscheibenanordnung für Aussen -und für Schrägeinstichschleifen hintereinander! -Dadurch jeweils 400mm Scheibendurchmesser! -Dadurch wesentlich geringere Kollisionsgefahr -Einfacheres programmieren -Schleifscheibenausrüstung jeweils 400x63x127mm -Einrichtung zum Betrieb einer HF-Spindel -Spindel optional gegen Aufpreis -B-Achse CNC gesteuert zum Aussen-Plan- und Innenschleifen in einer Aufspannung. Schwenkbereich +10°/-270° -C-Achse zum Polygonschleifen -Unterteil fest -Schleifkopfmotor 10,0 KW -Reitstock Itedpfjzkvucsx Ahben -Marposs Messsystem zur Schleifscheibenvermessung. -Längspositionierung Marposs

Condition: good (used), Year of construction: 1963, 3 different eccentric presses, manuf. WMW 1 x crank press with one ram 16 t Itsdpfx Aemi Rpiehben 1 x crank press with one ram 25 t

Condition: like new (used), Year of construction: 2022, operating hours: 454 h, load capacity: 1,500 kg, lifting height: 5,400 mm, fuel type: electric, mast type: triplex, construction height: 2,400 mm, Manufacturer + model: ACTIL N 15 S - TTFY Mast: 3F5400 ID: 26064.0363 Category: Demo Mast: 3F5400 Lowered height: 2400 mm Lifting height: 5400 mm Capacity: 1500 kg Year: 2022 Hours: 454 hours Iedpszv R Dcefx Ahbjtn Capacity: 24V / 775Ah Options: DEMO!! MINI forklift - Order picker - Counterbalance stacker (3-in-1!!) - Dual controls - Triplex mast - FFL mast - Stainless steel and fork spreader - Tilting fork carriage - Spotlights - 2 x Blue Spot lights - with cantilevered forks - SUITABLE for all types of pallets - POWER STEERING

Year of construction: 2001, condition: used, Technical details: Numbers of turbines: 1 Stck. drum length: 580 mm operating hours: 30.810 h compressed air: 5 - 7 bar filling volume: 100 dm³ total power requirement: 24,2 kW total wight: ca. 5,8 t DRUM - Shotblasting Plant in a closed drum Manual and automatic operation Isdsu Nu Nkepfx Ahbetn technical specifications: -spinning wheel Ø = 380mm -drum Ø = 1150 mm x length 580 mm -max. filling weight = 220 kg, filling volume 100dm³ -piece size (max. edge length) = 100mm -Turbines 380mm; 15.0 kW -blast media discharge speed approx. 80.0 m/s -Ablast media throughput/turbine approx. 240.0 kg/min. -Steel abrasive grade, nothing else possible! (recommended is: StD-Z 0,6 DIN 8201 HV 700) -Compressed air with cartridge filter system approx. 12 m³/h The plant is not electrically connected. Sale as currently is at the warehouse Leipzig (see last photos). Machine has been functional before dismantling. *

Condition: used, Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine. Manufacturer: Battenfeld-cincinnati Germany GmbH. Year of manufacture: 1999 Year of installation: 1999 Rated voltage: … V Maximum current consumption: … A Frequency: 50 Hz Itedpfezump Eex Ahbjn Required pressure: 6 bar Total weight: … kg Noise level: … dB Hydraulic pressure for the screen changer: Extrusion material output: 1000-1200 kg (filter-limited output: approx. 850 kg) Possible thickness: 1 – 5 mm Maximum width: approx. 1450-1480 mm Machine dimensions: as described in the layout. Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine Consisting of: Screw and barrel assembly, motor and drive system, control interface, and supporting auxiliary systems for feeding, thermal regulation, and downstream processing. Details: Feed station - 2x silos. 2 x metal separators - Degacan HE degassing elements, co-extruder Type BEX-1-150-32-D-V and BEX 45-25E / 89-9436-320 to produce sheets or coils. Main extruder composed of 7 heating zones and one vacuum zone. Co-extruder composed of 3 heating/cooling zones to control the polymer. Followed by 3 calenders with temperature controllers. Extrusion die - To be confirmed if included. Calender line setup. Betacontrol Mk1 thickness measuring system. Radioactive source has been removed. Calvatron corona treatment system. Kalvar Calvtron automatic coil changing system. Rollers and calibration table. End-of-line sheet separation and side cutting (slitting) machine. BC touch control interface. Full workshop manuals.