Used Wmw Zeulenroda Pye 10 S1 Z Wyrzutnikiem for sale (51,040)

Condition: used, Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock CM4 Auto Feeds transverse + longitudinal + rapid Lubricant pump Hfjdpszwgntofx Agtsl Voltage: 380 V Dimensions (L x W x H): 3000 x 1400 x 1500 mm Weight: approx 2,5 T

Condition: ready for operation (used), Fuse protection: 100A, control voltage: 220V, operating voltage: 380V, connected load: 30,4kW, weight: 14,4t, with four-jaw chuck (diameter: 900mm), tailstock, quill, three steady rests and control system. An on-site inspection is possible. Hfsdpfx Aszukt Iegtol

Condition: used, pressure 10 t stroke 400 mm feed down 200 mm/sec feed up 450 mm/sec Hjdpsd R Szusfx Agtefl max. distance table - ram 630 mm total power requirement 8,5 kW weight of the machine ca. 1,3 t dimensions of the machine ca. m

Condition: used, Technical details: pressure: 40 t throat: 365 mm distance table/ram: 800 mm max. ram stroke: 500 mm ram speed - reverse: 0,45 m/sec ram speed - forward: 0,10 m/sec ram surface area: 450 x 360 x 74 mm table surface area: 630 x 500 x 73 mm passage opening in table: Ø 205 mm table height over floor: 720 mm total power requirement: 13,0 kW weight of the machine ca.: 3,2 t dimension machine xH: 1,7 x 1,1 x 3,0 m Hfsdpfx Agou Nfuqstjl Other technical features: -trailing time: 443ms -trailing distance: 9mm -Last machine inspection: May 2020 valid for 1 year *

Condition: used, Year of construction: 1959, machine/vehicle number: 1727, Offer 24177 Hfsdpfx Aev Hckgsgtel Technical data: - Center height 180 mm - Center distance 1000 mm - Larger swing – Ø over bed 355 mm - Over cross slide approx. 200 mm - Spindle bore 36 mm - Taper of tailstock quill MK 5 - Travel of tailstock quill 260 mm - Spindle speeds 18 - 1800 rpm - Feeds - Travel of cross slide approx. 200 mm - Travel of top slide approx. 115 mm - Drive 400 V / 5.8 kW - With: - Tailstock, 3-jaw chuck, steady rest - Steel holder, live center, - Chip tray - Space requirement approx. W 2500 x H 1500 x D 1200 mm - Weight approx. 2100 kg

Condition: excellent (used), functionality: fully functional, WMW Heckert ZFWVG 250×1250 No. 71740386401 Long thread and spline milling machine, also for gear cutting. (Thread milling and spline shaft hobbing machine) Max. workpiece diameter: 250 mm (the machine can swing up to 500 mm above the bed/support) Milling length (Z-axis): 1250 mm Tailstock height above bed: 260 mm Spindle diameter (bore): 102 mm Max. module: Up to module 10 / 18 (depending on the specific head configuration) Spindle speed: 45 – 560 rpm Total power consumption: 9.5 kW Machine weight: Approx. 3,800 kg Hsdpfx Aszxn Anogtjfl

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 Condition: Well-maintained Equipment: Gantry milling machine High-Z S-1400T/105 (Rev. 1.5 - Facelift 2016) with ball screws Travel: 1400 x 1050 x 110 mm (X/Y/Z) Machine control Zero-3 (Rev. 1.3) for High-Z series, 5-channel, 110 - 240 Volt, 50/60 Hz Milling kit for High-Z S-1350 or S-1400T/105, additional stabilization of the Z-axis when machining very hard materials Hedpfx Aezu T Smjgtefl Energy arm for S-1350 and S-1400/105 Cable harness for clean routing of cables and hoses from milling motor, spray mist cooling, etc. T-slot plate on base frame for High-Z S-1400T/105 - 1790x1160mm (NL2016) 1790 x 1160 x 76mm T-slot keys, 8 pcs with bridge, M6 - 10 pcs. incl. screws M6x25 6 pcs. clamping bars 50x20x10mm M6 Base frame for combination with enclosure for S-1400T/105 - 1790x1450x900mm (NL2016) SET - Suhner milling motor UAD 30-RF / 1050W - 3,500-30,000 RPM, 230 Volt, 50/60Hz incl. 8mm and 10mm collets Collet set for Kress and Suhner (UAx-30RF) milling motors, 3.00mm / 3.175mm (1/8") / 6.00mm Milling cutter set, 10-piece (shaft 3.175mm) Wood milling cutter: 2x1mm / 2x2mm / 1x3mm Aluminum/plastic: 2x1mm / 2x2mm / 1x3mm Extraction nozzle made of aluminum for Kress or Suhner milling spindle Hose nozzle with Ø 32 and 38mm Dimensions 135x60x30mm Tangential module EOT-3, stroke 3mm Oscillating with 3mm stroke Connection cable for EOT-3 / TCM-4 for High-Z series - 5m Tungsten carbide blade type E12 - cutting edge 12mm Tungsten carbide blade type E18 - cutting edge 13.5mm EcoCam EC-4 continuous cutting pad 4mm / roll width 2m Always delivered in 2m roll width!!! 1m2 = 2 x 0.5m Tangential grooving module TCT-1 Tool holder type KR for grooving module TCT-1 for ball-bearing grooving wheels Grooving wheel B14 Grooving wheel B24 Side channel compressor Rubin 220, 1.5KW/50Hz vacuum pump incl. 3m spiral hose 40mm 230V/50Hz / 9.5A / 190mbar -190mbar / 71dB(A) Maintenance set High-Z series Grease gun + grease cartridge 400g + 100ml oil Network switch 5-port 10/100 Mbit/s + LAN cable 1m, 5x 10/100Mbps-RJ45 ports with auto negotiation Kinetic-NC control software incl. CNC-Pod (LAN), network cable + USB charging cable Vacuum table VT-150100 - 1500x1000mm incl. through-milling mat and connecting hoses Location: NRW Availability: Short-term Sold on behalf of a customer! Technical data without guarantee!

Condition: excellent (used), functionality: fully functional, WMW Heckert ZFWVG 250X800 No. 262122/42 Long thread and spline milling machine, also for gear hobbing. (Thread milling and spline shaft hobbing machine) Hsdpfx Agozxqbyjtsfl Max. workpiece diameter: 250 mm (the machine can swing up to 500 mm over the bed/support) Milling length (Z-axis): 800 mm Tailstock height above bed: 260 mm Spindle diameter (bore): 102 mm Max. module: Up to module 10 / 18 (depending on the specific head configuration) Spindle speed: 45 – 560 rpm Total power consumption: 9.5 kW Machine weight: Approx. 3,400 kg

Condition: excellent (used), Year of construction: 1984, power: 17 kW (23.11 HP), type of input current: three-phase, pressing force: 160 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 125 mm/s, table width: 900 mm, table length: 630 mm, throat depth: 800 mm, ram plate width: 700 mm, ram plate length: 450 mm, oil tank capacity: 500 l, total length: 22,000 mm, total width: 12,500 mm, total height: 34,500 mm, overall weight: 7,000 kg, operating pressure: 160 bar, installation height: 800 mm, pressure: 250 bar, Hydraulic press PYE 160 S/1M. Year of manufacture: 1984. Manufacturer: VEB Wema Zeulenroda (Germany). The machine has undergone a general overhaul. Specifications: Maximum pressing force: 160 tons. Operating pressure: 16 MPa. Upper table: 700 x 450 mm. Lower table: 900 x 630 mm. Daylight opening: 800 mm. Cylinder stroke: 500 mm. Downward speed: 200 mm/sec. Upward speed: 125 mm/sec. Power requirement: 17 kW. Oil tank capacity: 500 l. Weight: 7000 kg. Height: 3450 mm, Length: 2200 mm, Width: 1250 mm. Machine in very good condition. Inspection and test under power possible. Hsdpfsqy E I Rsx Agtjfl

Condition: used, Guide rail and surface grinding machine WMW FRITZ HECKERT Aschersleben Type SZ 1000 x 1250 x 3000 / 344 Manufacturer's No. 13.2236.2 Year of manufacture 1989 Nominal grinding area 3000 x 1250 mm Table clamping surface 3240 x 1000 mm Grinding length max. 3300 mm Processing width 1250 mm Processing height 1250 mm Grinding wheel diameter (surface grinding support) max. 600 mm Grinding wheel width (surface grinding support) max. 100 mm Grinding wheel diameter (swiveling support) max. 450 mm Mains connection 400 Volt, 50 Hz - Swiveling grinding support, motor power 16.5 kW, infinitely variable speed - Grinding support for surface grinding, motor power 15 kW, infinitely variable speed - New electrical control system, based on SIEMENS S7, year of manufacture 2001 Hfjdpshv A A Djfx Agtol - New electrical control cabinet located nearby, year of manufacture 2001 - Infinitely variable grinding wheel speed on both grinding supports - Swiveling grinding spindle for guide rail and profile grinding - Control panel swiveling and height-adjustable - Coolant system located nearby - Hydraulic system located nearby - Oil circulation lubrication system located nearby - Various grinding wheels and arbors Space requirement (complete) L x W x H 11900 x 7700 x 4600 mm Weight 45 tons Very good condition

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, pressing force: 250 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 110 mm/s, table width: 900 mm, table length: 630 mm, throat depth: 800 mm, ram plate width: 750 mm, ram plate length: 450 mm, oil tank capacity: 500 l, total length: 2,200 mm, total width: 1,250 mm, total height: 3,700 mm, overall weight: 8,000 kg, Hydraulic press PYE 250 SS. Manufacturer: WMW VEB Zeulenroda (Germany), year 1985. Specifications: Maximum pressing force 250 tons. Working pressure 18.6 MPa. Upper table 750x450 mm. Lower table 900x630 mm. Clearance 800 mm. Cylinder stroke 500 mm. Downwards speed 200 mm/s. Upwards speed 220 mm/s. Power requirement 24 kW. Weight 8,500 kg. Height 3,680 mm, length 2,200 mm, width 1,250 mm. The machine is in very good technical condition. Fully overhauled. Hjdpfevcb Tlsx Agtsfl

Condition: good (used), Year of construction: 2012, Condition: 2012 overhauled to the latest UVV Installation height: 800 mm Ram stroke: 500 mm Projection: 360 mm Nominal force: 400 kN Hydraulic pressure: 160 bar Operating hours: 1356 Other: new control from Pilz, electrical circuit diagrams available Hfjdpfx Agezvnfdetjl Video about functionality available

Condition: like new (used), CNC vertical jig boring machine WMW MIKROMAT Travel X: 1120 mm Hedpfxjzzwazs Agtefl Travel Y: 710 mm Spindle travel Z: 315 mm Travel W: 630 mm Numerical Command: CNC NUM 1060 Spindle: Ø 125 mm Cone: SA40 Rotation: from 36 to 2240 RPM Table size: 1400 x 900 mm Distance between colums: 1080 mm Maxi distance spindle nose/table: from 0 to 900 mm max Maxi eligible load on table: 1000 kg max Separate electrical panel Machine renewed in 2000 with CN NUM1060 Voltage: 380 V Dimensions (L x W x H): 4000 x 2460 x 3030 mm Weight: approx. 9 T

Condition: good (used), Year of construction: 1982, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Hjdsz Akgkjpfx Agtofl Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: excellent (used), workpiece diameter 60 mm grinding depth 30 mm clamping length 1000 mm Hfsdpsunt Egofx Agtjl weight of the machine ca. 0,6 t dimensions of the machine ca. 0,5 x 0,5 x 2,1 m

Condition: refurbished (used), Single-column hydraulic press (completely overhauled) PYE 250 S1M with drawing cushion - Pressing force: 2500 kN - Installation height: 800 mm - Stroke: 500 mm Hjdpfeycl Evox Agtefl - Speed: downwards 200 mm/s - Drawing cushion: 1000 kN, stroke: 200 mm - Drive: 20.5 kW - Dimensions: 3500 x 2000 x 1200 mm - new control system, new control cabinet, light curtain (single stroke, double stroke, safety), new hydraulics, - new seals - new UVV safety inspection

Condition: refurbished (used), Single-column hydraulic press (completely overhauled) PYE 160 S1M - Pressing force: 1600 kN - Installation height: 800 mm - Stroke: 500 mm - Speed: downwards 200 mm/s - Draw cushion selectable: 630 kN, stroke: 200 mm - Drive: 17 kW - Dimensions: 3500 x 2000 x 1200 mm Hsdpfeycl Hgox Agtsfl - new control system, new switch cabinet, light curtain (1-stroke, 2-stroke, safety), new hydraulics, - new seals, paint finish as requested - new UVV safety inspection

Condition: used, Technical details: cutting capacity: 1 mm round blank diameter max.: 1000 mm cutting capacity: 1 mm round blank diameter max.: 1000 mm Weight approx.: 0,2 t dimension machine xH: 2,0 x 0,5 x 1,4 m Application: manual cutting of round steel sheet parts upper blade Ø 69mm x 11mm; adjustment vertical 25mm with hand toggle lower blade Ø 74 x 15mm; adjustment NO = fixed Centering fixture with die The material is clamped manually with handle vertival 15mm. Displacement horizontal 500mm manual. Hedpfxsu Icqye Agtefl *

Condition: used, Technical details: bore capacity in steel (diameter): 22 mm throat: 205 mm Hfodpjvxf Irefx Agtel bore stroke: 100 mm spindle taper MT: MK2 spindle speed:: 2 step U/min feed: manuell mm/U Distance spindle/table max.: 150 - 600 mm base plate surface area: 350 x 400 mm table clamping surface:: 360 x 280 mm table rotating: 360 ° drill table adjustment: 450 mit Kurbel mm column diameter: Ø 100 mm control voltage: 380 V total power requirement: 0,8 kW weight of the machine ca.: 270 kg dimension machine xH: 0,6 x 0,5 x 1,95 m column drill incl. machine + vice. *

Condition: used, pressure 100 t throat 355 mm stroke 8 - 130 mm table surface area 710 x 1200 mm T-slots at tabel 3 clamping plate thickness 75 mm no. of strokes 50/80 Hub/min ram adjustment 80 mm ram surface 450 x 560 mm T-slots at ram 2 Hedpfxotqm Dhe Agtjfl tool shank hole (depth x diameter) 100 x 50 mm max. distance table - ram 540 mm distance between columns 400 mm connected load 11,5 kW weight of the machine ca. 9,0 t Overall size 1,65 x 2,25 x 3,05 mm - increased installation height - with die cushion - converted to safe control (Pilz PLC), safe for “hand inlay work”. on the open tool"

Condition: excellent (used), functionality: fully functional, Magnet Plate 1,000 x 500mm, auto down feed. Hfsdpfx Ajz Ap Dbjgtel

Condition: used, Year of construction: 1980, machine/vehicle number: 403006, power: 15 kW (20.39 HP), input voltage: 380 V, Centering and end machining machine WMW Fritz Heckert FXLZD 160, manufactured in the 1980s Condition: functional, in operation Year of manufacture: approx. 1980 (1980s) Location: West Saxony Price: upon request Technical data: Manufacturer: WMW Fritz Heckert Model: FXLZD 160 Manufacturing number: 13600 Hfodpfxezyl Rlj Agtel Rated voltage: 380 V Control voltage: 24 V Connected load: 15 kW Rated current of the machine: 40 A Description: We offer this used WMW Fritz Heckert FXLZD 160 centering and end machining machine, manufactured around 1980. The machine is used for the simultaneous end machining (facing and centering) of shaft ends as preparation for machining between centers. The machine is functional and currently in operation. Inspection and functional testing at the location in West Saxony are possible by appointment. If you have any questions or require further information, please send a message or call. Price: upon request Other machines available from site liquidation Site takeover negotiable

Condition: used, pressure 160 t throat 360 mm stroke 500 mm table surface area 1250x630 mm ram surface 1000x450 mm Hjdpfx Ajlp U Hgsgtsfl table height 1000 mm dayligth 800 mm weight of the machine ca. 8 t

Condition: used, Year of construction: 1989, machine/vehicle number: SN: 00789901, functionality: unexamined, pressing force: 815 t, Press 1, manufacturer: Umformtechnik Erfurt GmbH, type: PKZZI 800.1/3150x1600/500E, serial number: 00789901, year of manufacture approx. 1989, 8000 kN, last service in 10/2025, machine in operation until 12/2025. Technical data of the press according to the nameplate: Hedpjzvdm Rsfx Agtefl Press force max. 8,000 kN – at a distance in front of the die of 12.5 mm Press force 2,500 kN – at a distance in front of the die of 200 mm Stroke rate in idle 10 to 20 min-1 Stroke of the ram 500 mm Adjustability of the ram: 500 mm Strip feed system consisting of: Roller feed, manufacturer: GSW Schwabe, type VRMA80/78, machine no. 2011-60187, year of manufacture 2011 with reel 1 (sandwich processing), SAWAB reel, year of manufacture 2011 with reel 2, manufacturer: GSW Schwabe, type: LMHR1000/1100, no.: M2011-00171, year of manufacture 2011 with reel 3, manufacturer: GSW Schwabe, type: MHR5/1400, serial no.: M2011-00170, year of manufacture 2011 including enclosure GWS project no.: 2011-60187 with peripherals: - Conveyor belt - Raziol system Function and technical data not verified without additional items/without further accessories, unless explicitly stated as part of the item WE STRONGLY RECOMMEND PARTICIPATING IN THE INSPECTION! If interested, please contact us via email!

Condition: good (used), Year of construction: 2004, functionality: fully functional, GLASS FLAT GRINDING MACHINE Hsdpfxszgvl Hj Agtofl