Used Winter Grinder 1500 Auto Magnetic Plc for sale (16,793)

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: Hfjdpfxeq Dzi Tj Agtel 7″ Min./16″Max. 178mm Min./ 406mm Max. Worktable Feed: Air / Oil Travel (maximum): 12″ 305mm. Adjustable Limits: Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale.

Condition: used, Automatic Grinder Manufacturer: Seydelmann Model: AV 250 Completely made of stainless steel Hfsdpfxoukg Dno Agtel Two-speed working worm, three-speed feeding worm Standard cutting set Electric power: 80kW Voltage: 400V 50Hz Hole plate diameter: 250 mm Hopper content: 400 liters - 1000 liters

Condition: good (used), functionality: fully functional, grinding depth: 210 mm, center height: 510 mm, spindle speed (min.): 9,000 rpm, spindle speed (max.): 15,000 rpm, grinding length: 1,800 mm, rotational speed (max.): 15,000 rpm, rotational speed (min.): 9,000 rpm, Spindle Speed Min: 9.000 Rpm / Max: 15.000 Rpm Centre height Min: 230 mm / Max: 510 mm Spindle stroke 210 mm Horiz. Table size 700 x 1.000 mm Table stroke 1.800 mm Featured with : - Feed on table - Feed on hor. Movement - Cooling unit - Safety doors Hodpfoyg Hduex Agtsfl

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, For sale is a used WINTER MRS-300 multi-blade circular saw, manufactured in 2013. This machine is suitable for the efficient longitudinal cutting of solid wood, boards, and strips. Thanks to its continuously adjustable chain feed and electric height adjustment, it is ideal for use in industrial or artisanal woodworking applications. The machine features an infeed roller conveyor and automatic lubrication. Technical data: Manufacturer: WINTER / Henrik Winter Holztechnik GmbH Type: MRS-300 Series: New Line Year of manufacture: 2013 Machine number: 13310021 Chain width: 300 mm Cutting height: 10–100 mm Saw blade diameter: 200–350 mm Total connected power: approx. 25 kW Voltage: 380 V Frequency: 50 Hz Working height: approx. 740 mm Table size: approx. 1,530 × 760 mm Continuously adjustable chain feed Electric height adjustment Automatic lubrication Infeed roller conveyor Dust extraction connection Dimensions: approx. 2,200 × 1,500 × 1,580 mm Weight: approx. 2,500 kg Equipment: Infeed roller conveyor Multi-blade saw arbor Continuously adjustable feed control Electric height adjustment Central control panel Automatic lubrication Dust extraction hood / dust extraction connection CE marking Transport is possible for an additional charge! The machine is currently still at the customer's site but would be available shortly! Hfsdjzxxmkopfx Agtol The machine will be inspected before sale. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: used, Year of construction: 2016, Manufacturer : Kutter- und Gerätebau Wetter Model : AW D114 Year: 2016 Type : automatic mincer / grinder Power : 9 kW Tank capacity : 110 liters Diameter of perforated disc: 114 mm Hedsyvv Ddjpfx Agtofl Rotational speed – processing screw: 160/320 rpm Rotational speed – feed screw: 20–40 rpm Width : 820 mm Depth: 1260 mm Height: 1290 mm Weight : 570 kg Complete technical file  

Condition: used, Year of construction: 1972, total width: 1,700 mm, total length: 3,100 mm, total height: 1,600 mm, Colour: Green Empty weight: 2.500 kg Price: On request - Year: 1972 - Documentation available: No - CE certificate present: No - Serial number: 1011/447 - Drive system: Conventional - Grinder type: Internal and external grinding machine - Drive system: Hydraulic - Power [kW]: 6.5 - Distance between centres [mm]: 1000 - Centre height [mm]: 175 - Grinding diameter [mm]: 350 - Max. grinding wheel diameter [mm]: 400 - Max. grinding wheel thickness [mm]: 50 - X-axis travel [mm]: 260 - Z-axis travel [mm]: 1300 - Swivel range [°]: 270 - Table width [mm]: 1590 - Table depth [mm]: 140 - Main spindle power [kW]: 3 - Min. spindle speed [rpm]: 1500 - Max. spindle speed [rpm]: 2200 - Transport dimensions: 3100mm x 1700mm x 1600mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Hfodpfjzy H A Asx Agtsl Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2006, Type: AV250 Serial number: 06089-1 Year of construction: 2006 Hole plate diameter: 250 mm Hopper: 800 litres Power: 3 x 400V, 50Hz, 78kW Dimensions: 1650 x 1700 x 2400 mm Weight: 1750 kg Hodpsyazi Ssfx Agtjfl 3 speeds on feed screw, 2 speeds on working worm

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2700x1400x1750 mm Weight 1800 kg Hfjdpfx Agjv A Ht Djtjl Total power requirement 5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2700x1400x16502 mm Weight 1800 kg Hfedpfxov A Ht Ro Agtjl Total power requirement 8 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1500x2900x850 mm Hsdpfx Agevz E S Aetefl Weight 650 kg Total power requirement 3 kw

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 537, workpiece width (max.): 1,440 mm, workpiece height (max.): 1,500 mm, Equipment: CE marking, TECHNICAL DETAILS Max. workpiece width: 1,440 mm Max. workpiece height: 1,500 mm MACHINE DETAILS Voltage: 400 V Current consumption: 15.5 A Fuse rating: 16 A Main motor power: 8.0 kW Power: 8.0 kW Dimensions & Weight Dimensions (L x W x H): 2,900 x 1,500 x 1,850 mm Hsdpfx Agszxchxetjfl Machine weight: 300 kg Shipping packages: 1 unit EQUIPMENT CE marking

Condition: as good as new (ex-display), functionality: fully functional, Surface grinder. Taiwanese machinein new condition. IT has been a demonstration machine, has run a few hours. Standard accessories: Grinding wheel Wheel flange Flange extractor Wheel balancing arbor Wheel balancing base Hfsdpfx Aom Tv U Togtel Wheel dresser with diamond Leveling screw & plates Tool box & tools Manual Optional accessories: 3 HP Spindle motor (siemen brand) instead of 2 HP Longitudinal by sensor & solenoid valve Electro magnetic chuck, 150 x 450 mm (Fine pole) Coolant system (Capacity 52L, 1/8 HP) Auto crossing stroke adjustment Crisscross grinding Power rapid up/down system (AC motor, 1/5 HP) Wheel flange (extra) Back water splash shield Led lamp instead of halogen lamp Spindle motor inverter 3 HP (Taiwan made) Digital readout (lu, cross: 300 mm + vertical: 450 mm; 2 axes monitor) Auto. demagnetizer for chuck 5A If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Condition: used, Year of construction: 2022, total width: 1,800 mm, total height: 1,900 mm, total length: 1,800 mm, overall weight: 3,000 kg, Hydraulic briquette press Manufacturer: Winter Type: BP 450 Year of manufacture according to nameplate: 2022 Hfodpfxjzxlzns Agtel Technical data: Capacity max. 450 kg/h Motor 35 kW / 400 V, 50 Hz Chip compression min. 1,000 kg/cm² max. 1,500 kg/cm³ Wood moisture < 14 % Briquette dimensions: Length 150 mm, Width 60 mm Dimensions L x W x H: 1,800 x 1,800 x 1,900 mm Weight 3,000 kg Purchase price net € plus applicable VAT. VAT will be shown separately on our invoice. Subject to changes, errors and prior sale. Sale is made without warranty and guarantee, and only to business customers. Inquiries will be processed from Monday to Friday between 8 a.m. and 4 p.m.

Condition: used, total width: 800 mm, total length: 2,200 mm, total height: 1,500 mm, Colour: Green Empty weight: 1.000 kg Knife bench, knife sharpening machine grinder Model: Conventional Manufacturer: Erma Fulda Type: ASM-8/4 Series: 045371 Travel: 1200mm Table: 800x150mm Motor: 1.85kW Max. Spindle speed: 2730 rpm Grinding diameter: 165mm Hsdsz Ain Topfx Agtjfl Machine-size: 2000x800x1550mm Machine-weight: 500kg - Documentation available: No - CE certificate present: No - Serial number: 045371 - Drive system: Conventional - Power [kW]: 1.9 - Number of axes [pcs]: 1 - X-axis travel [mm]: 1200 - Table width [mm]: 800 - Table depth [mm]: 150 - Max. grinding wheel diameter [mm]: 165 - Max. spindle speed [rpm]: 2730 - Options: Knife Sharpener, Tiltable magnet - Transport dimensions: 2200mm x 800mm x 1500mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), For sale: professional cutter and drill bit sharpener, model PP U3. Condition: very good, complete unit ready for operation. Included in the set: • Set of grinding wheels • Adjustable angular tool holder • Workshop lamp with flexible arm • Keys and clamping elements Specifications: Hsdpfxsxdh Hqs Agtjfl • For sharpening cylindrical and spiral end mills • For sharpening step and cylindrical drills • Wheel linear speed up to 35 meters per second • Maximum noise level: 66 dB • Machine weight: 41 kg Solid, stable construction—ideal for precise tool machining. A reliable solution for tool rooms, CNC workshops, and machine shops.

Year of construction: 2015, condition: as good as new (ex-display), machine/vehicle number: 2015020890, For sale is a magnetic filter system with integrated cleaning system. Filter systems of this type are usually made individually to order from customers. In this system, there is an exhibition purpose, which only served to show, and was hardly in use. product benefits Installation possible into existing production lines Separation of any ferrous metal contaminants Very corrosion resistant High wear resistance Compact design Low maintenance Hsdpfecwghbsx Agtsfl Technical details - 400 x 400 x 390 mm - Inlet 260x260mm - Inlet 260x260mm - 8 pcs magnetic filter rods

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x680x1580 mm Weight 400 kg Total power requirement 2 kw Hfedpfxevz Hf Rs Agtol

Condition: like new (used), Completely made of special stainless steel Specialized for grinding cheese and yellow cheese BLOCKS Hole plate diameter: 200 mm Hopper capacity: approx. 400 liters Synchronized speed for shatter and feed screw Working worm Machine dimensions in сm: Width: 215,0 Depth: 150,0 Height: 196,0 Main Motor Power: 45 kW Installed Power approx. 65 kW Hfjdpfjpgnftsx Agtsl Voltage: 380 V, 50 Hz

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2150x480x1330 mm Weight 230 kg Total power requirement 1,6 kw Hfodpevz Hi Njfx Agtel

Condition: refurbished (used), functionality: fully functional, Automatenwolf K+G Wetter, Type AW G 160 - Hopper capacity: approx. 360 liters - 2 x working auger speed: 17.5 / 30 kW - 2 x feed auger speed - Pre-cutter – clamping device - Discharge protection – electrically locked - Working auger and cutting set discharge - Electrically locked footboard - Foil keyboard control - Output max. approx. 8000 kg/h - fresh meat - Main motor: 17.5 / 30 kW Hfodpfx Agozphahstol - Electrical system: 3x400 V / 50 Hz, 33 kW, 60 A - Cutting set: complete, made of stainless steel / new - Stainless steel tool cart, mobile - Machine weight: approx. 1,400 kg - Accessories + documentation

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1130x500x1250 mm Hfodpfx Agsvz Hbretel Weight 300 kg Total power requirement 1,6 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 600x700x1050 mm Hfjdpovz Hp Nefx Agtjl Weight 120 kg Total power requirement 1,2 kw

Condition: ready for operation (used), * Brand: Bakker Magnetics * Model: permanent magnetic conveyor belt (unused) Hodeywmctspfx Agtjfl * Block: L= 835 x W=610 x H=247 mm. * Length frame: A-A = 1500 mm. * Beltwidth: 600 mm. * Driving: Gearbox 1,5 kW.

Condition: used, total height: 2,650 mm, total length: 4,700 mm, total width: 2,100 mm, Colour: Grey Empty weight: 5.500 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - X-axis travel [mm]: 1500 - Y-axis travel [mm]: 800 - Z-axis travel [mm]: 700 - Table width [mm]: 1200 - Table depth [mm]: 400 - Magnet width [mm]: 1200 - Magnet depth [mm]: 300 - Options: Digital readout - └ Type of digital readout: Heidenhain - Control: Conventional - Transport dimensions: 4700mm x 2100mm x 2650mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Hjdpfxjzldvqe Agtefl

Condition: reconditioned (used), KELLENBERGER UR 175 x 1500 is a Cylindrical grinder engineered for precision, high accuracy and reliability. Working capacities: centre height 175 mm, distance between centres 1500 mm; grinding diameter 340 mm, grinding length 1500 mm; wheel Ø400×50 mm, bore 127 mm; table angular displacement 10°. Main specs: wheel speeds 4 steps 1500–3600 t/min, angular displacement 270°; workpiece spindle stepless 20–400 t/min, rotatable 360°; table speed stepless up to 6 m/min; external wheel motor 4.0 CV; 50 Hz 3x380 V; weight ≈2200 kg; overall 3000×1750×1600 mm. Accessories: tailstock with fine adjustment, internal grinding attachment, measuring control, redressing device, magnetic chuck Ø230 mm, wheel with flange, lamp, steady. Enables tight tolerances, suited to applications requiring high precision. Hjdpfx Aszv I Ncjgtofl