Used Vertical Flow Pack Machine for sale (68,564)

Condition: used, Year of construction: 2015, x-axis 1250 mm Dodey Tbtljpfx Ab Tokp y-axis 840 mm z-axis 550 mm control Siemens 840D turning speed range - main spindle 12000 min/-1 drive capacity - main spindle 22,5 kW Torque max. 140 Nm Number of tools 24 St. max. tool length 320 mm spindle taper HSK 63 Number of working hours 56000 h spindle hours 17500 h weight of the machine ca. 9,7 t This machine can be viewed under power by appointment and is in our estimation in very good condition. Furnishing: - IKZ - chip conveyor - Glass measuring rods in all axes - automatic door - Swivel axis with counter bearing, Fibro There are 4 identical machines available. The machines were used for light countersinking and drilling work. Changes and errors in the technical data and information, as well Subject to prior sale!

Condition: used, Year of construction: 2006, x-travel 450 mm y-travel 330 mm Dkodpfxoy Nn Etj Ab Tjp z-travel 350 mm control Heidenhain iTNC 530 turning speeds 42.000 U/min tool taper HSK 40 E table surface area 470 x 400 mm T-slots 5 max. table load 500 kg Number of working hours 51993 h spindle hours 13858 h total power requirement 15 kW In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2017, x-travel 1.020 mm y-travel 700 mm Dsdsy Dvnxspfx Ab Tekp z-travel 500 mm Control Siemens 828D table dimensions 1.050 x 700 mm spindle tunring speed 20.000 U/min tool taper HSK-A63 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2016, x-travel 1.020 mm y-travel 700 mm Dkjdpfx Ajyw Tm Eob Tep z-travel 500 mm Control Siemens 828D table dimensions 1.050 x 700 mm spindle tunring speed 15.000 U/min tool taper BBT-40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Year of construction: 2007, condition: used, control Siemens 840D grinding wheel diameter 900 mm Workpiece - grinding width 144 - 152 mm Workpiece - grinding dimension 22 - 25 mm turning speeds 24 m/s: 1.425 U/min peripheral speed max. 25 m/sec capacity 37 kW total power requirement 75 kW weight ca. 18,0 t dimensions of the machine ca. L 4,9 x B 4,9 x H 2,6 m In our opinion, the machine is in good condition used condition. Double face side grinders Dodpfx Abexq Hkue Tokp The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 2007, x-travel 740 (915) mm y-travel 500 mm z-travel 500 mm Control Heidenhain iTNC 530 turning speeds 20-12.000 U/min feed 0-15.000 mm/min tool change unit 16-fach rapid power traverse in X-and Z direction 30/20 m/min tool taper SK 40 table surface area 900 x 528 mm max. table load 700 kg spindle hours 8.961 h total power requirement 32,5/17,5 kW weight of the machine ca. 7,3 t dimensions of the machine ca. 2,8 x 2,4 x 2,4 m Machining Center HERMLE U 740, built in 2007 Dsdjzkl Ekspfx Ab Tjkp Accessories: Tool holders, see pictures

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Siemens control system, 12-position tool changer, BT40, Travel range X500 - Y300mm, Dkjdpfx Abozkk Nus Top Renishaw touch probe, Accessories.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, controller manufacturer: Heidenhain, controller model: TNC620, total height: 2,950 mm, total length: 2,160 mm, total width: 2,615 mm, table width: 1,000 mm, table length: 450 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 977 h, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, A unique opportunity! This Doosan DNM4500, manufactured in 2019, is in new condition and has only 977 spindle hours! Exceptionally low operating hours, perfectly maintained, and ready for immediate use. The machine is very well-equipped and can be inspected in working order at our location! Additional options & accessories: - Electronic handwheel - Chip conveyor - Renishaw OTS tool probe - Receiver for Renishaw 3D probe - Spindle cooler Dkodpfszkkhqsx Ab Tep - Preparation for a 4th axis - Approximately 30 tool holders - All original documentation.

Condition: good (used), Year of construction: 2005, Parts shown by hand not come. Dodszkkgmjpfx Ab Tokp

Condition: reconditioned (used), CNC Vertical Machining Center HERMLE B 300 V With Heidenhain iTNC 530 path control Year of manufacture: 2014 Travel ranges: X 800 Y 600 Z 500 Speed range: 20 – 15,000 rpm, stepless Djdpoy U H Iqefx Ab Tjkp With the following accessories: Fixed angular table, 1000 mm x 560 mm clamping surface Vertical tool changer with 30 magazine slots (HSK 63) Air blow through the spindle center IKZ 40 bar Chip conveyor BLUM tool breakage/measurement system Coolant system Manual cabinet door, manual cabinet roof Polycarbonate safety screens Electronic thermal compensation iTNC 530 Electric hand control module HR 410 3D measuring probe Control cabinet cooler (RITTAL) Spindle oil cooler Oil mist extraction Chip flushing gun 4 adjustable machine feet Operating manuals

Condition: good (used), Year of construction: 2008, Parts shown by hand not come. Dksdpfxezkkcze Ab Tep 12.000 rpm, SK 40 30 places in tool changer. 4.axis on table will come.

Condition: good (used), Parts shown by hand not come. SK 40 ,30 tool places in tool changer. Djdpfx Aszki Rkeb Tekp

Condition: defective spare-parts repository (used), Year of construction: 2002, functionality: not functional, machine/vehicle number: 7338, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 700 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, table load: 1,500 kg, rotary table diameter: 1,000 mm, spindle speed (max.): 12,000 rpm, For sale is a 5-axis CNC machining center from the manufacturer Mikron, type UCP 1350. Please note that the milling spindle is fixed, and the guide shoe on the Y-axis is defective. Technical data: Manufacturer: Mikron AG Nidau (Switzerland) Model / Type: UCP 1350 CNC control: Heidenhain iTNC 530 Machine no. / Serial no.: 7338 Year of manufacture: 2002 Machine weight: 11,200 kg Travel ranges & axes: X-axis (longitudinal): 1,350 mm Y-axis (transverse): 1,150 mm Z-axis (vertical): 700 mm (or 800 mm, depending on the model) B-axis (swivel range): -100° / +10° (NC swivel head / table) C-axis (rotary axis): 360° (simultaneous rotary table) Table dimensions & load capacity: Table type: NC swivel rotary table for 5-axis simultaneous machining Table diameter / dimension: Ø 1,000 mm Max. table load: up to 1,500 kg Milling spindle & tool changer: Tool holder: SK 40 / HSK-A63 Spindle speed max.: 12,000 / 18,000 rpm Tool changer: Automatic magazine (30 / 60 / 92 positions) Electrical connection values & power: Operating voltage: 400 V (3 phases) Mains frequency: 50 Hz Maximum current: 125 A Rated power: 53 kW Control voltage: 24 VDC Sound level: 75 dB(A) Safety certification: CE marking available Upon request, transport and loading can be organized throughout Europe for an additional fee. Prices plus VAT. Inspection is possible by appointment. Contact us, our team will be happy to assist you further. Trade-in or exchange is possible! Djdezki Hrepfx Ab Tokp Machine buying and selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Gjbn N Ay Dowza Dxogoil Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 24,000 rpm, Control system: SIEMENS 840 D solutionline Operating hours: 12,400 h Spindle hours: 2,850 h Table surface: 840 x 420 mm Max. table load: 300 kg Tool interface: BBT 30 Tool magazine: 25 positions Chip-to-chip time: 1.7 s Chip conveyor Software package: Dkjdpjzkimxsfx Ab Tsp - Job Shop - Siemens Mdynamics Dimensions L x W x H: 2340 x 1650 x 2500 mm Weight: 4,100 kg

Condition: used, Year of construction: 2011, operating hours: 10,550 h, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, torque: 84 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 1,200 kg, table width: 600 mm, table length: 1,400 mm, table load: 1,200 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 10,550 h, coolant supply: 70 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Selling a top-maintained Mikron HPM 1200 HD, manufactured in 2011, equipped with a Heidenhain iTNC530 control system. Travel ranges: X: 1200mm Y: 600mm Z: 500mm Equipment: Table dimensions: 1400 x 600mm Table load capacity: 1200kg Control system: Heidenhain iTNC530 Djdjzkbr Topfx Ab Tokp Chip conveyor Spindle mount: HSK-A63 Spindle speed: 20000 RPM Tool changer: 60 positions Electric handwheel Tool measurement 3D probe IKZ 70 bar Weight: 15 tons Accessories: 20 tool holders HSK-A63 2 vices Complete documentation Machine feet The machine can be inspected and tested under power after prior appointment.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, actuation type: electric, rotational speed (max.): 3,100 rpm, rotational speed (min.): 700 rpm, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, throat depth: 1,490 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, NEW | YEAR 2026 | CE CERTIFIED | MADE IN POLAND | EXW €38,000 + VAT WHY THE PRIAM The Priam is a vertical, electronically controlled glass drilling machine that does most of the work for the operator. The entire feed is electronically controlled — drilling is smooth and repeatable. Dkodpfxeh Ek H Ss Ab Tep The operator's role is minimal. After mounting the hole saws, they press the "Calibration" button — the machine measures the length of both drills (front and rear) and their diameter, then automatically assigns the correct spindle speed. After every drill change, the machine will not start drilling until calibration is done — setup errors are impossible. The hole position on the vertical axis is entered on the monitor and the support bar travels there automatically (up to 1,060 mm below the spindle axis); horizontally, the glass is positioned against 6 stops. The machine does the rest: the pneumatic clamp measures the glass thickness, the rear spindle pre-drills to a depth calculated by the controller, and the front spindle completes the hole from the other side — chip-free, clean edges at the first attempt. Optional: double-sided chamfering (hole saw with chamfering ring), tapered holes, and pulse drilling mode for laminated (VSG) glass. BUILT FOR SERIAL PRODUCTION Up to 20 holes on the vertical axis can be programmed — the operator enters the dimensions once and the machine drills them automatically. In serial production (shower enclosures, balustrades) the following panes are drilled without re-entering positions. Drilling at position 0 on the support bar allows holes on the glass edge (half-moon cut-outs). Performance: a Ø 75 mm hole in 4 mm glass in approx. 25–30 s (feed in glass approx. 1 mm/s, speed set by the operator). Recommended: thin-wall, self-sharpening hole saws (e.g. Champion, L=75 mm). TECHNICAL DATA Drilling diameter range: Ø 5–80 mm (both drills same diameter) Glass thickness: 2–20 mm Max. pane size: 2,000 × 4,000 mm, up to 200 kg Support bar travel: up to 1,060 mm below spindle axis Holes on the glass edge (half-moon): yes, position 0 Drilling program: up to 20 holes on the vertical axis Spindle speed: adjustable 700–2,800 RPM, assigned automatically after calibration Feed: automatic, electronically controlled Cooling: closed water circuit, approx. 30 l Compressed air: 6 bar (pneumatic clamping) Power supply: 400 V / 16 A / 4 kW Machine dimensions (L × W × H): 4,440 × 1,487 × 2,793 mm Weight: 1,900 kg Scope of delivery: CE marking, documentation, operating manual MANUFACTURER, SERVICE, TERMS EXPOGLASS is a Polish manufacturer of glass processing machinery — built at our own factory in Nysa (in-house welding shop and powder coating). Service with online support; spare and wear parts available from stock. Delivery and commissioning across the EU, operator training on site. Delivery time: approx. 8 weeks. Warranty: 12 months. Visit our factory and see the Priam drill your own glass samples before you buy — video of the machine in operation in this listing. Glasstec 2026, Düsseldorf, 20–23 October, Hall 12, Stand 12A72.

Condition: used, Year of construction: 2004, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: iTNC530, total height: 2,690 mm, total length: 2,830 mm, total width: 2,340 mm, table width: 1,150 mm, table length: 580 mm, table load: 900 kg, overall weight: 4,100 kg, spindle speed (max.): 8,000 rpm, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: documentation/manual, rotational speed infinitely variable, Additional options & accessories: - 30-position tool magazine (standard: 22 positions) Dsdjzi Spyopfx Ab Tjkp - Internal spindle cooling. - Original documentation from Bridgeport and Heidenhain. Weight & dimensions: approx. 4,100 kg approx. 2830x2340x2690 mm (LxWxH)

Condition: used, Year of construction: 1996, Technical details: x-travel: 2500 mm y-travel: 560 mm z-travel: 600 mm control: TNC 426 CA bore capacity in steel (diameter): 400 cm³/min Max. Milling-capacity: 400 cm³/min tool changer with: 34 Plätze Tool pull-in force: 12 kN spindle taper MT: SK 40 spindle throat: 580 mm Revolution per minute: 20...7500 steples U/min. max. torque on the spindle: 210 Nm distance spindle nose and table: 0 - 600 mm feed:: X/Y/Z = 1 - 24.000 steples mm/min. rapid traverse:: X/Y/Z = 24 steples m/min feed power: X/Y = 6 kN und Z = 8 kN kN table-size: 3300 x 500 mm table load capacity - central/maximum: 2500 kp interface: ja total power requirement: ca. 43 kW Weight approx.: 14,4 t dimension machine xH: 3,05 x 5,6 x 3,0 m dimension swarf conveyor LxWxH: 6.6 x 0,6 x 1,3 m VERTICAL DRILLING AND MILLING CENTER in travelling column design. with integrated coolant supply link belt chip conveyor MAN+HUMMEL with cooling water tank and pump Dsdpfx Abevad Hpo Tokp cooling lubricant treatment ALLWEILER AG, size L:1550 x W: 1000 x H:1200mm; filter belt width 500mm; pressure 30bar Hydraulic unit Machining area can be partitioned, partition wall available *

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 008078, travel distance X-axis: 850 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 630 mm, controller model: Fanuc O-M, rotational speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 850 mm Travel range, Y-axis: 550 mm Travel range, Z-axis: 630 mm Spindle mount: ISO40 Speed: 8,000 rpm Table surface area: 1,000 x 540 mm MACHINE DETAILS Control system: Fanuc O-M Dkedpfx Abjzi D Rpj Tep Tool changer magazine positions: 24 Weight: 5,500 kg EQUIPMENT Electric handwheel Chip tray

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, controller model: Heidenhain TNC426, rotational speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 1,000 mm Travel range, Y-axis: 750 mm Travel range, Z-axis: 750 mm Table size: 1,150 x 700 mm Tool shank: SK40 Spindle speed range: 12,000 rpm MACHINE DETAILS Control system: Heidenhain TNC426 Machine weight approx.: 10,500 kg EQUIPMENT 30-position tool changer Electronic handwheel Chip conveyor Coolant system Dkedpfx Abezi D Rcs Top

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, controller model: Mitsubishi M70, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 600 mm Travel range, Y-axis: 400 mm Travel range, Z-axis: 500 mm Spindle mounting: SK40 Spindle speed: 12,000 rpm Spindle drive power: 7.5 kW Table clamping area: 2x 700x400 mm MACHINE DETAILS Control system: Mitsubishi M70 Tool changer magazine slots: 24 Weight: 6,600 kg EQUIPMENT Pallet changer 4th axis (rotary table) 24-tool automatic tool changer IKZ (integrated coolant supply) Chip conveyor Dedpfxezi D Emj Ab Tokp

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Vertical Machining Center DECKEL MAHO DMC 635V Year of manufacture: 2009 CNC control: Siemens 840D Axes X-axis travel (mm): 635 Y-axis travel (mm): 510 Z-axis travel (mm): 460 Distance spindle nose - table surface (mm): 720 Feed rate (m/min): 20 Rapid traverse (m/min): 30 Axis acceleration (m/s²): 5 Work Table Pallet dimensions (mm): 560×790 Djdpfx Asyay D Ueb Tokp Max. workpiece weight (kg): 600 Spindle Max. spindle speed (rpm): 14,000 Spindle drive power (kW): 18.5/15 (40%ED/cont) Spindle torque (Nm): 100/74 Tool System Tool holder: SK40 Number of tools in magazine: 20 Electronic handwheel Chip conveyor Blow air through spindle selectable via M function Direct measuring system XYZ Machine Operating Hours: Total power-on hours: 14,500 Spindle hours: 3,600 Connected power requirement (kVA): 35 Basic Machine: Dimensions/Weight Length (mm): 2,275 Width (mm): 3,288 Height (mm): 2,670 Weight: 4.5 t Including vices and tool holders

Condition: good (used), Year of construction: 2015, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: Siemens, x-axis travel 635 mm Dkjdpfx Abey Rzbws Tep y-axis travel 510 mm z-axis travel 460 mm Control system SLIMline Siemens Main spindle speed range 20 - 12,000 rpm Main spindle drive power 13 / 9 kW Torque 83 / 57 Nm Tool holder SK 40 Clamping surface of table 790 x 560 mm Number of T-slots 4 + 1 T-slot width 4 x 14H12 / 1 x 14H7 mm T-slot spacing 100 mm Max. table load 600 kg Table height above floor 720 mm Number of tool stations 20 pos. Max. tool diameter 80 mm Max. tool diameter with free adjacent slot 130 mm Max. tool length 300 mm Max. tool weight 6 kg Total tool weight approx. max. 60 kg Feed rate max. 20,000 mm/min Rapid traverse 30 m/min Total power requirement 17 kVA Machine weight approx. 4.0 t Space requirement approx. 4.5 x 4.0 x 2.8 m ICS 12 bar Chip conveyor Preparation for 4th axis (rotary table)

Condition: good (used), Year of construction: 2007, functionality: fully functional, Manufacturer DECKEL MAHO DMC 835V Year of manufacture 2007 Control Siemens 840D / Shop Mill X-axis travel 835 mm Y-axis travel 510 mm Z-axis travel 510 mm Spindle speed 10,000 rpm Feed rate Programmable up to 15 m/min - rapid traverse 30 m/min Positioning tolerance 0.008 mm Tool magazine 30 stations Internal coolant supply and chip conveyor Dsdpoyaywbsfx Ab Tjkp Weight approx. 6.5 t

Condition: good (used), Year of construction: 2006, Vertical machining center Machine type: Hermle U 740 Control: Heidenhain iTNC 530 Year: 2006 SPECIFICATIONS Travel X-Axis: 740 (915) mm Y-Axis: 500 mm Z-Axis: 500 mm Rapid motion: (X/Y/Z): 30 / 30 / 20 m/min. Spindle speeds: 12.000 rpm Spindle power: 32,5 / 17,5 kW Torque: 200/108 Nm Tool: SK 40 Toolchanger Tool capacity: 16 Table size: 900 x 500 mm Max. Table Load: 700 kg Machine weight: 7300 kg Equipment Cooling tank: 200 l Chip tray Dkjdpfsziy Nzsx Ab Tsp Caliper: TS 640 Electronical handwheel Chip conveyor Chip rinsing pistol