Used Renner Sl-I 7,5 for sale (54,533)

Condition: ready for operation (used), Year of construction: 2023, power: 7.5 kW (10.20 HP), pressure (min.): 6 bar, pressure (max.): 15 bar, noise level: 62 dB, compressed air tank capacity: 270 l, The machine has already been dismantled and stored by a qualified technician. TECHNICAL DETAILS Operating overpressure: 15 bar Delivery rate (at 15 bar): 400 - 790 l/min Delivery rate (at 13 bar): 430 - 860 l/min Delivery rate (at 10 bar): 330 - 1,090 l/min Delivery rate (at 8 bar): 330 - 1,240 l/min Delivery rate (at 6 bar): 330 - 1,370 l/min Volumetric flow rate: 90 m³/h Air connection: 1/2" inches MACHINE DETAILS Compressed air tank: 270 l / 11 bar, upright, galvanized Residual oil content at 20°C max.: 0.01 mg/m³ Differential pressure wet, saturated: 110 mbar Rated power of drive motor: 7.5 kW Operating voltage / frequency: 400 ~3 / 50 V/Hz Sound level: 62 dB(A) Dimensions & Weight Dimensions (L x W x H): 1,079 x 553 x 1,014 mm Machine weight: 273 kg EQUIPMENT Refrigerant dryer Hfedszb Idropfx Aiqjn Frequency control Prefilter grid Electronic control RENNERtronic Touch Level-controlled condensate drain KN5 230VAC, shortened version Schneider mounting kit ABZ-Eco 3100 Uni condensate drain Ecomat Schneider condensate collection line, 3 connections Pre-filter LPPN 73 FF5 Particle filtration 5 microns Sub-micron filter LPPN 73 SMA Particle filtration 0.01 microns Wall mount incl. connection kit for 2 filters LPP 23 - LPP73 2x connection hose VSL 1/2"-1300 mm Oil-water separator KON-P 5 Note: Accessories are without guarantee. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on site.

Condition: used, Year of construction: 2000, KOSME Extra Fix 16T rotary labelling machine for labelling bottles or other oval containers. Manufacturer: KOSME Model: Extra FIX 16T 1056 |S3 E2 + SL Year of manufacture: 2000 Capacity: up to 9,000 bottles/h Carousel: 16 stations Equipped with three cold glue labelling heads (front, back, and neck) Original electrical documentation. Hfodoywchlspfx Aiqsn Technical condition: used machine, condition as shown in the photos.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 170 h, machine/vehicle number: 20356455, Exhibit: Hedjupz D Hepfx Aiqofn Renner RSDK-B 7.5 screw compressor system with integrated refrigeration dryer with galvanized 250 liter container with time-controlled condensate drain with controller RENNERtronic Touch Operating pressure: 10 bar Delivery rate at 10 bar (ue): 1020 l / min Rated power drive motor: 7.5 kW Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 part 13): 78 dB (A) Length: 1397 mm Width: 617 mm Height: 1408 mm Weight: 311 kg Compressed air connection: G 1/2 " Compressed air tank (ECN according to AD2000): 250 l volume, galvanized Power connection refrigeration dryer: 230 V AC Pressure dew point refrigeration dryer + 3 ° C Time-controlled condensate drain Visit our store. We always have a large selection of new and used compressors in stock!

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, New trade fair exhibit (available immediately): RENNER Riko 700/250 S-KT piston compressor with galvanized 250 liter container with refrigeration dryer and level-controlled condensate drain with sound insulation hood with CEE plug with metal buffer set for compressed air tanks Technical data: Motor power: 4.0 kW Rated voltage: 400V Max. pressure: 10 bar Delivery quantity at 7 bar: 570 l/min Cylinder / Stages: 2/2 Sound level: 68 dB(A) Volume compressed air tank: 250 liters Dimensions L x W x H: 1411 x 722 x 1377 mm Weight: 296kg We always have a large selection of new and used compressors in stock! Available immediately. Hedpfxorxu Ere Aiqefn

Year of construction: 2022, condition: like new (used), Used Machine Year of Manufacture: 2022 Hodpfx Ajzk Nrzsiqjfn Condition: Like new, very few operating hours, not used in production Features and Technical Specifications: - Compact screw compressor with variable speed control and innovative LOGIN control system - Includes air receiver and refrigerated dryer - Maximum pressure: 10 bar - Effective air delivery: 1,050 l/min - Motor power: 7.5 kW - Noise level: 62 dB(A) - Connection: 1/2 - Tank capacity: 270 liters (AD2000) - Variable-frequency drive - Electronic control - Oil heat exchanger - Compressed air receiver hot-dip galvanized inside and out - Drive transmission: Direct coupling - Starting method: Star-delta - AD 2000 compliant: yes Dimensions: 1,200 × 650 × 1,540 mm Weight: 295 kg Availability: available shortly Storage location: Röllbach

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 7 h, RENNER SCROLL 5.5 - 10 bar oilfree, supersilent compressor with integrated refrigerant dryer Year of construction: 2024 Operating hours: 7 Bh Pressure: 10 bar Rated power: 5,5 kW Delivery quantity: 520 l / min Sound level: 57 dB (A) Compressed air outlet: 1/2 " Dimensions length x width x height: 1165 x 550 x 920 mm Weight: 231 kg Visit our shop. We always have a large selection of new and used compressors Hfedpfjuxcvwex Aiqjn in stock!

Condition: used, Year of construction: 2009, functionality: limited functionality, turning diameter over cross slide: 830 mm, turning length: 1,250 mm, turning diameter: 580 mm, spindle bore: 103 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 8 rpm, Equipment: rotational speed infinitely variable, Complete CNC component set Siemens 802 D – bed and guide rails ground Description: CNC component set / machine construction kit with Siemens Sinumerik 802D control. The machine is in an advanced state of reconstruction. Sold as pictured as a DIY project for completion. Hfsdoy Sub Hjpfx Aiqjn All components are present. Key highlights: • Mechanics: The machine bed and support have already been freshly ground and painted in RAL 5015. • Geometry: The mechanical geometry has already been professionally restored (optimal basis for high precision). • Control: Includes a functional Siemens Sinumerik 802D CNC control. • Feed drive SIEMENS, main motor regulator from Siemens • Completeness: All related parts and assemblies are in stock and ready. Perfectly suited for the reconstruction of a precise CNC machine. Sold ex-works as inspected, without warranty. Technical data of the metal lathe MEXPOL TUB 830 C in the condition it was in before being disassembled: • Maximum turning diameter over bed: 830 mm • Maximum turning diameter over slide: 580 mm • Maximum bar diameter: 103 mm • Maximum turning length between centers: 1250 mm • Rapid traverse rate in X/Z axis: 10 m/min • Spindle speed range: 8–2000 rpm • Number of steps for adjusting the spindle speed: 3 • Diameter of the front spindle bearing: 140 mm • Power of the spindle drive: 15 kW • Maximum spindle torque: 2100 Nm • Bed width: 520 mm • Height of the centers above the bed guides: 420 mm • Diameter of the tailstock quill: 105 mm • Extension of the tailstock quill: 200 mm • Taper of the tailstock quill: Morse 6 • Drive of the X-axis: SIEMENS motor (torque X-axis: 11 Nm) • Drive of the Z-axis: SIEMENS motor (torque Z-axis: 18 Nm) • Coolant pump capacity: 25 l/min • Power of the coolant pump motor: 0.18 kW • Speed of the coolant pump motor (50 Hz): 2800 rpm • Installed power: 22 kW • Power supply: 3x 400 V; 50 Hz Equipment of the lathe TUB 830C: • CNC control: SIEMENS SINUMERIK 802D Sales and delivery conditions: • Loading: Loading onto your transport vehicle is included in the price. • Delivery: Ex-works Hilden. • Validity: The offer is subject to change – subject to prior sale (valid only while stocks last).

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 4 h, pressure (max.): 8 bar, RENNER SCROLL SLDK-NEO 3.7 S (8 bar) oil-free, silent compressor with integrated refrigerant dryer with level-controlled steam trap with 250 litre containers with RENNERtronic Touch control Hfjdpfx Aovb Ay Deiqsn Year of construction: 2024 Hours: 4 Bh The compressor is in stock and available immediately Pressure: 8 bar Rated Power: 3.7 kW Flow rate: 410 l/min Sound level: 54 dB(A) Compressed air outlet: 1/2" Dimensions length x width x height: 1433 x 633 x 1580 mm Weight: 280 kg Visit our store. We always have a wide range of new and used compressors in stock! Immediately available.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Charmilles Robofil 240 SL Year of manufacture: 2004 Travel ranges (X / Y / Z): 350 x 220 x 220 mm Travel ranges (U / V): 350 x 220 mm Max. taper angle: +/- 30° at 220 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1000 x 550 x 220 mm Maximum workpiece weight: 750 kg Cutting speed of 300 mm²/min Best surface finish: Ra 0.22 µm Available wire diameters: 0.10 mm to 0.33 mm Dimensions of the complete system: 2020 x 2050 x 2000 mm Total weight of the system: 2450 kg The machine is currently in use at our customer's site and will be available from September. Hfodpfszwv S Iex Aiqen We would be pleased to offer the following services: - Cleaning and overhaul of the machine - Commissioning and training - Delivery - Clamping devices - Cooling unit - Transport

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Slugger model with 12 station in special tooling Max. compression force of 120KN 16/20 station available in D tooling with 100KN compression force Square model with GMP construction. Optional electro magnetic clutch for Non pharma / heavy duty application ACVFD as an option for the main motor. Hsdpfx Aijrrgtrjqofn High torque motor for slugging application. Ideal for Slugging/Effervescent tablets/Veterinary/Non pharma applications. Load cell for compression force monitoring available as an option. 38mm diameter round tablet compressed with ease.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 31524565, overall weight: 286 kg, available immediately: RENNER Riko 960/270 ST-KT piston compressor with galvanized 270 liter container with refrigeration dryer and time-controlled condensate drain with star-delta starter with metal buffer set for compressed air tanks Technical data: Motor power: 5.5 kW Hfsdpfxjwhxlue Aiqjn Rated voltage: 400V Max. pressure: 10 bar Delivery quantity at 7 bar: 740 l/min Cylinder / Stages: 2/2 Sound level: 79 dB(A) Volume compressed air tank: 270 liters Dimensions L x W x H: 970 x 795 x 1880 mm Weight: 264 kg We always have a large selection of new and used compressors in stock! Available immediately.

Year of construction: 2008, condition: like new (used), MULLER mobile lifting column/jib with 1/2 rotation of the tank Load capacity 150 Need to be connected to lift Total weight 490kg Sold with 5 tanks: Hfsdpfx Aev Dtihjiqon * 1 tank of 100 liters * 2 tanks of 200 liters * 1 tank of 150 liters * 1 tank / hopper, with valve for powder, of 90 liters

Condition: used, Year of construction: 2005, operating hours: 18,950 h, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, Wire Diameter 0,1-0,3 mm Automatik Threading Working Hours 18950 Std Verfahrwege X 350 mm Y 220 mm Z 220 mm U 350 mm V 220 mm Hfjdpjwzyvhjfx Aiqen Year 2005

Condition: excellent (used), Year of construction: 2016, Geiger Handling Hfodpow Hy Iusfx Aiqjn EA Mini 2001 SL 4 pieces (2x year 2014, 2015, 2016), 1 pc. without remote control

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: 3.324287, • Large format printer with solvent ink • Solvent based ink: 6 colors (4CMYK+2CM light) • Printing width: 3.2 M (3200 mm) • 24 high-performance Spectra piezoelectric printheads • 600 dpi (2-sided printing) • Max. roll weight up to 230 KG • Up to 64 m2 / h • Jeti software RIP (E9YC4000) Equipment / additional information: • Carrier rewind unit: Jeti 3M Solvent (E9WF2000) Hfjdpfx Aewh Shcsiqen • Retro Heater Unit (E9ZZL000) • Jeti Spectra head 24 SL PH 3324 (E91UE000) • Vinyl Loader (E9WKB000) • Vinyl Roller Assy (E9ZUA000) • Spare parts kit for Jeti 3324 (E9V4C000) • Backlit camera (E9Z2P) • Complete set of new filters (12 pieces) • 10 meters of new hoses also included • Three sets of new connectors • Original cleaning device for the ink system of the machine Including EXHAUST HOOD over the whole machine

Condition: excellent (used), Year of construction: 2006, Ref:11130 . 2006 Perfecta SL-10P Pile Lift Hsdszmycpjpfx Aiqjfn Comprising; Perfecta SL-10P Mobile pile lift with steel plate. Keeps pile at a constant height, electronic eye for automatic lifting/ lowering. Casters for mobility. Swinging control panel for left or right side use Lowering safety device, 1,5 kVA - 380 V. Lifting capacity 1000 kg, maximum size 90 x 130 cm. Specification: Maximum Paper Size: 76 × 109 cm to 110 × 165 cm (depending on the exact sub-variant). Stack Height Capacity: Up to 160 mm Power requirements : 3pH, 380-415V, 1.5kW.

Condition: good (used), For sale: used industrial submersible pump, KSB KRTF 100-250/74UG2-249, complete with control box, cables, and chain. The pump features a side discharge connection with a Storz-type coupling and a base for positioning the unit. Data from the nameplate: Manufacturer: KSB Type: KRTF 100-250/74UG2-249 Capacity: 5–180 m³/h, maximum approximately 3000 l/min Head: 17.4–6.2 m Rated power P2: 7.5 kW Supply: 400/690 V, three-phase Frequency: 50 Hz Rotational speed: 1450 rpm Hfsdpfez Spiqsx Aiqjn Rated current: 15.3/8.4 A Maximum medium temperature: 40°C Degree of protection: IP68 Operating mode: S1 Insulation class: F Power factor cos φ: 0.81 Impeller diameter: 249 mm Included in the set: Pump with motor. Control box with buttons, switch, and operating hour counter. Power and control cables. CEE power plug. Chain. Storz-type discharge coupling.

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 745 mm, travel distance Z-axis: 300 mm, spindle motor power: 18,000 W, spindle speed (max.): 4,500 rpm, total height: 3,200 mm, workpiece diameter (max.): 220 mm, overall weight: 7,500 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840Dsl, workpiece height (max.): 175 mm, product length (max.): 3,120 mm, number of axes: 2, This EMAG EMAG VL5 i DSL vertical turning machine was manufactured in 2014. It features a powerful main spindle drive with 18kW and a speed range of 0-4500 rpm. Equipped with a Siemens SINUMERIK 840Dsl control system and a robust 12-position EMAG flange turret, it ensures precise and efficient operations. Ideal for handling workpieces up to 6kg with its specialized hydraulic chuck. For more information about this vertical turning machine, please reach out to us. - Max. Chuck Diameter: 250 mm- Max. Swing Diameter: 270 mm- Closed Standard Automation Capacity: 16 (80...220 mm) / 10 kg; 22 (30...160 mm) / 8 kg; 37 (30...85 mm) / 4.5 kg- Max. Permissible Total Automation Load: 175 kg- Chain Length: 224 Inches- Number of Chain Links: 224- Chain Pitch: 1 Inch (25.4 mm)- Loading Time: 2-4 s- Spindle Flange (DIN 55026): Size 6- Front Spindle Bearing Diameter: 110 mm- Main Drive AC Asynchronous Motor Power (100/40% ED): 18 / 27 kW- Main Drive Torque (100/40% ED): 200 / 300 Nm- Corner Speed: 850 rpm- Rapid Traverse Rate X: 60 m/min- Rapid Traverse Rate Z: 30 m/min- Feed Force X and Z: 10 kN- Ball Screw Diameter X / Z: 40 mm- Tool Carrier: 12-position turret, Cylindrical Shank Receptacle DIN 69880 (VDI 40)- Tool Shank Diameter: 40 mm- Max. Tool Length incl. Holder: 190 mm- Max. Tool Interference Circle: 760 mm- Driven Tools Max. Speed: 6000 rpm- Driven Tools Corner Speed: 3000 rpm- Driven Tools Max. Power: 8.5 kW- Driven Tools Max. Torque (10/40/100% ED): 40 / 24 / 15 Nm- Current Supply / Current Type: 3 ~- Frequency: 50 Hz- Operating Voltage: 400 V- Control Voltage General (DC): 24 V- Control Voltage Valve / AC: 24 V (DC) / 230 V (AC)- Light Connection: 24 V- Connection Power: 36 kW- Rated Current: 64 A- Supply Fuse: 80 A- Electrical Execution Standard: VDE 0113- Length incl. Chip Conveyor: 4185 mm Additional equipment, not included • Coolant tank capacity: 360 liters Machine Benefits Technical Machine Benefits Hfjdpfxozg H Dyo Aiqjn • High working accuracy, rapid traverse speeds, high maximum speed of driven tools • Machine from single shift operation • Maximum room temperature: up to 30°c • Maximum humidity: 50% • Sound pressure level: 78db(a) Extra Information Machine still under power Dimensions Machine Depth 3900 mm Technical Specification Through-spindle Coolant Yes Driven Tools Yes

Condition: used, Year of construction: 2013, total length: 5,100 mm, total width: 1,800 mm, total height: 1,950 mm, Colour: White Empty weight: 7.500 kg Price: On request - Year: 2013 - Documentation available: Yes - CE marking present: Yes - Serial number: 40032 - Drive system: Conventional - Power [kW]: 30.0 - Centre height [mm]: 445 - Swing over bed [mm]: 890 - Carriage turning diameter [mm]: 490 - Distance between centres [mm]: 3000 - Bed width [mm]: 700 - Spindle bore [mm]: 155 - Min. spindle speed [rpm]: 3.7 - Max. spindle speed [rpm]: 1000 - Max. workpiece weight [kg]: 5000 - Options: Three-jaw chuck, Removable bed, Fixed steady, Quick-change tool post, Digital readout - Swing over removable bed [mm]: 1060 - Type of digital readout: Fagor - Transport dimensions: 5100mm x 1800mm x 1950mm (l x w x h) - Transport weight [kg]: 7500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Hsdpfx Aisznmlgoqefn

Condition: used, Year of construction: 2012, Overview This Gernep Labetta 4/3/8 480 2A is a rotary cold glue labeller for glass bottles, built in 2012 by Gernep (Barbing, Germany). It was in service at a craft brewery and applies body, neck-ring and back labels at up to 9,000 bottles per hour. The machine ran on one format, a 0.30 L BNR beer bottle, and is supplied complete with format parts, a large stock of spare parts and the glue pump units. Hedpfx Aiez I Rt Eeqjfn Technical data - Manufacturer: Gernep (Barbing, Germany) - Model: Labetta 4/3/8 480 2A - Year of manufacture: 2012 - Machine type: rotary cold glue (wet glue) labeller for glass bottles - Output: up to 9,000 bottles/h - Labelling stations: 2 - station 1 body label and neck-ring label, station 2 back label - Bottle format: 0.30 L BNR beer bottle (glass) - Direction of operation: left - Control: Siemens S7 Equipment - Two wet glue labelling stations for body, neck-ring and back labels - Format parts for the 0.30 L BNR bottle - Large stock of spare parts - Glue pump units - Complete technical documentation: operating manuals, spare parts lists, component manuals, electrical and mechanical drawings Condition Taken out of service in working condition in May 2026 and stored since. Regularly maintained by Gernep; major Gernep service in March 2025 with new bearings and wear parts. Everything required to put the machine back into operation is included. The machine can be moved by forklift or pallet truck. Inspection is possible by arrangement, and the former operators are available for questions. Availability Immediately available. Location: Netherlands.

Condition: used, Year of construction: 1990, operating hours: 2,946 h, power: 115 kW (156.36 HP), Equipment: air conditioning, cabin, INTERNAL VEHICLE NUMBER: M662 ----CLAAS DOMINATOR 88 SL ----HOURS: 2,946 ----YEAR OF MANUFACTURE: 1990 ENGINE: MERCEDES OM 366A 6-CYLINDER INLINE ENGINE (4-STROKE) WATER-COOLED MAXIMUM SPEED: APPROX. 25 KM/H CUTTING UNIT: 3.90 METERS RAPS TABLE THRESHING DRUM WIDTH: 1300 MM THRESHING DRUM DIAMETER: 450 MM Hfodpfx Aoz Sdvwsiqsn INFINITELY VARIABLE ADJUSTABLE WIND FAN FOR CLEANING FUEL TANK PIPE: HYDRAULICALLY SWIVELING TIRES NEW NUMBER OF SHAKERS: 5 SHAKERS HYDRAULIC DRIVE GRAIN TANK CAPACITY: 4600 L STRAW SPREADER TRANSPORT LENGTH: 10 METERS TRANSPORT HEIGHT: 3.85 METERS UNLADEN WEIGHT: APPROX. 8500 KG HEATER AIR CONDITIONING (COMPRESSOR MISSING) 3D HEADER LEVELING HYDROSTATIC WITHOUT CUTTING UNIT WAGON THE DRIVE FROM THE HEADER HAS BEEN COMPLETELY OVERHAULED NEW BASKET NEW BELT NEW BLADE Contact us directly via WhatsApp at: Why Autohaus Mat GmbH? 1. Attractive trade-in: We handle the process quickly and fairly. With our trade-in bonus, you maximize the value of your vehicle and benefit when purchasing a new model. 2. Individual financing solutions: Would you like to finance your new vehicle? We offer customized financing options tailored to your needs: with or without a down payment. * Flexible terms * Top conditions 3. Personal customer service: Our experienced team will support you from the initial consultation to the vehicle handover. 4. Our additional services: In addition to vehicle purchase, we offer exclusive services for a smooth process: Worldwide vehicle sales: Support with purchase and export, wherever you are. Transfer license plates: Provision of export or short-term license plates for transport. Customs clearance: We take care of all formalities for export abroad. Delivery of your vehicle: Safe and punctual delivery directly to you. Important: All offers are subject to availability. The vehicle description serves as a guide; only the information in the purchase contract or order confirmation is legally binding. For vehicles with VAT, a net sale for export is generally possible if all required documents are available. Net sales within the EU are now only conducted with VAT deposit and proof of registration in the destination country (Confirmation of Arrival), provided that all necessary documents are present. For our export customers, we offer the following services: Export license plates for up to 30 days * Short-term license plates (5 days) * Preparation of the export declaration Contact us directly via WhatsApp at: Staff on site during opening hours. Please call in advance to make a reservation. We look forward to your call Your team from Autohaus MAT in Waibstadt

Condition: like new (used), functionality: fully functional, 3-axis positioning system, rotating, lifting, and pivoting, 7500 kg load capacity. Condition: absolutely like new, only used for measurement purposes. Position can be set using limit switches. Hfodpfjzyx Nbex Aiqsn Includes hand-held remote control. Faceplate diameter: 1000 mm. Faceplate speed: 1 RPM, including speed controller. Torque: 5500 Nm. Maximum turning radius: 1700 mm. Tilting range: +/- 180° relative to the horizontal faceplate. Tilting moment: 14500 Nm. Tilting speed: 180°/min. Tilting axis: 200 mm above the upper edge of the faceplate. Lifting speed: 1000 mm/min. Lower faceplate height: 500 mm. Upper faceplate height: approx. 2000 mm. Includes complete documentation, plans, operating instructions, and EC declaration of conformity. New price: approx. €75,000.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, Trade fair exhibition machine available immediately (Plug and Play): Frequency-controlled RENNER RSDKF-PRO 7.5 (10 bar) oil-injected screw compressor including RENNERtronic Plus Touch control including 2 x galvanized 90 liter compressed air tanks including refrigeration dryer with level-controlled condensate drain including CEE plug Operating hours: 1 Pressure: 10 bar Rated power: 7.5 kW Quantity delivered: Delivery quantity at 10 bar: min. 0.33 m³/min max.: 1.09 m³/min Compressed air connection: G 1/2" Sound level: 62 dB(A) Volume compressed air tank: 2 x 90 liters Hfsdpfxjrxu Aho Aiqon Dimensions L x W x H: 1120 x 755 x 1550 mm Weight: 369kg Freight possible for an additional charge. Visit our store. We always have a large selection of new and used compressors in stock!

Condition: used, Year of construction: 2016, Overview This Scaligera ULISSE 4000 is a sleeve labeling machine for cans, built in 2016 by Scaligera Packaging in Italy. It applies sleeves to sleek and standard cans at up to 4,000 cans per hour and comes with its matching Scaligera steam shrink tunnel from the same year. The line ran carbonated soft drinks in cans and was in production until early September 2023. The machine runs left to right. Sleeves are cut from the reel, opened and placed over the can in the sleever; the steam tunnel then shrinks them tight onto the can body. Technical data - Manufacturer: Scaligera - Model: ULISSE 4000 - Year of manufacture: 2016 - Machine type: sleeve labeler with steam shrink tunnel - Output: up to 4,000 cans/h - Containers: sleek and standard cans - Machine direction: left to right - Power supply: 400 V, 3-phase, 50 Hz Hfedpfxoz H N Hhj Aiqon - Connected load: 8 kW in total (sleever 2 kW, steam tunnel 6 kW) - Max. current: sleever 7 A, steam tunnel 10 A - Compressed air (sleever): 6 bar - Steam supply (tunnel): 6 bar, up to 200 kg/h - Weight: sleever approx. 850 kg, steam tunnel approx. 350 kg - CE mark on both machine plates Equipment - Scaligera ULISSE 4000 sleeve applicator with infeed screw and guarded, windowed housing - Scaligera TVP2SE steam shrink tunnel (2016) with two inspection windows and pressure gauges - Electrical control cabinet with push-button operation and signal tower Condition Used. The machine was in production until early September 2023 and is now dismantled, so it cannot be shown in operation. Sold without warranty. Availability Immediately. Location: Belgium.

Condition: ready for operation (used), Year of construction: 2012, spindle speed (max.): 5,000 rpm, travel distance X-axis: 350 mm, travel distance Z-axis: 130 mm, controller manufacturer: FANUC, controller model: 31i, number of axes: 7, This 7-axis DMG GILDEMEISTER MSL60/7 was manufactured in 2012. It features a spindle speed of 5,000 rpm and a spindle bore of 60 mm. The machine includes a counter spindle and driven tools, enhancing its versatility for complex machining tasks. If you are looking to get high-quality turning and milling capabilities, consider the DMG GILDEMEISTER MSL60/7 turn-mill centre we have for sale. Contact us for further details. • Spindle bore: 60 mm • Working hours: 28,000 h Hfjdpfxsz R S Dyo Aiqen Additional equipment • Bar feeder: IEMCA • Chip conveyor: Yes Technical Specification Counter Spindle Yes Driven Tools Yes