Used Rehm Conformal Coating for sale (3,494)

Condition: used, length 900 mm weight of the machine ca. 95 kg dimensions of the machine ca. 900 x 450 x 850 mm Technical Specifications Ibedpfoz Auipox Ahyec Continuously adjustable range [A] 35â??250 Duty cycle (DC) at Imax. (10 min) [%] 40 Welding current at 100% duty cycle [A] 170 Mains connection [V] 3/PE 400 Continuous power at 100% duty cycle [kVA] 5.5 Protection class IP 21 Included: - Hose set - Pressure regulator - Ground cable - Spool adapter

Condition: used, length 1050 mm height 1450 mm Ibedpfoz Aui Ajx Ahysc weight of the machine ca. 175 kg

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. Ibsdpfxjwzmcbj Ahyoc FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: new, Year of construction: 2026, BUMEX Sp. z o.o. | Industrial Powder Coating Technology A professional, compact industrial powder coating system designed for serial production and demanding workshop applications. Engineered with a strong focus on process stability, structural durability and premium coating quality. A complete solution ready for immediate operation in professional powder coating facilities. Scope of Supply ✅ Powder Coating Curing Oven 1200 × 1500 × 1800 mm ✅ Powder Coating Spray Booth with Filtration System 1400 × 800 × 1400 mm POWDER COATING OVEN — BUMEX INDUSTRIAL STANDARD Technical Data Ibjdpfshd Nrasx Ahysc Working dimensions: 1200 × 1500 × 1800 mm Total power: 18 kW Key Construction Features ✔ stainless steel front frame preventing paint peeling at the door-to-frame contact area — long-term durability and premium appearance, ✔ excellent temperature uniformity thanks to an efficient air circulation system ensuring stable curing without overheating or cold zones, ✔ heavy-duty industrial construction designed for continuous operation, ✔ 4 patented BUMEX safety locking systems guaranteeing perfect door pressure, chamber tightness and maximum operator safety, ✔ internal loading trolley and external trolley for ergonomic handling, ✔ optimised airflow circulation ensuring repeatable curing quality. Result: fast heating, stable temperature control and perfectly cured powder coating finish. POWDER COATING SPRAY BOOTH Technical Data Working dimensions: 1400 × 800 × 1400 mm Fan power: 1.5 kW Airflow capacity: 6500 m³/h Premium Equipment ✔ construction made from powder-coated galvanised steel panels providing high corrosion resistance, ✔ 2 × 100% polyester filters mounted in TWIST system — fast installation and removal without tools, ✔ automatic filter cleaning system maintaining constant performance, ✔ highly efficient and low-noise industrial extraction fan, ✔ stable airflow ensuring effective powder capture, ✔ ergonomic working area for operator comfort. BUMEX Standard ✔ CE conformity, ✔ full technical documentation, ✔ manufacturer warranty, ✔ warranty and after-sales service, ✔ professional technological consulting. Commercial Terms ✔ own transport — individually quoted, ✔ VAT invoice provided, ✔ customised configurations and dimensions available. BUMEX Sp. z o.o. We design industrial equipment built for long-term reliability, safety and predictable performance.

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: documentation/manual, type plate available, Rehm Focus ARC P400 Ibodpfxoy Tzhio Ahyjc

Year of construction: 2019, condition: good (used), Sturm Coating Coating System For sale is a complete industrial Sturm robotic painting system from 2019. The automated coating system was used for series production coating of components and comes from an industrial production facility. Ibsdszka Sfspfx Ahyjc The used painting line consists of, among other things, a painting booth, drying and cooling zones, conveying technology, and several KUKA and Yaskawa industrial robots. The system is complemented by a thermal exhaust gas cleaning system. Due to the automated system design, the robotic painting system is particularly suitable for industrial applications in the automotive industry, metal processing, and series production. Technical Data & Scope of Supply: Manufacturer: Sturm (system) / KUKA & Yaskawa (robots) Year of construction main system: 2019 Previous operation: 3-shift operation (condition corresponds to age) System components: Units, drying and cooling zone, painting booth, loading and unloading station Included robots / peripherals: Several spare KUKA robots (models KR 210L 150-2 / KR 210 2, years of construction 2006–2012) Associated robot control cabinets 2x Yaskawa robots EPX 2900 1x Thermal post-treatment / exhaust gas cleaning system (VeniaKab / RNV) Condition notes: Control technology: According to the factory maintenance department, it is state-of-the-art. Electrical & mechanical: Mostly in a condition appropriate to its age or good condition. Cyber security data deletion: For security reasons, all hard drives of the robots and PC-based stations have been removed. "Everything from one source: We would be happy to offer you suitable bank financing for your project." You can find more new and used items in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, FOR SALE: COMPLETE UV PAINTING LINE – SORBINI / CEFLA / BARGSTEDT Individual machines can also be purchased! For sale: a complete, industrial UV painting line designed for finishing flat surfaces, furniture components, MDF, HDF boards, panels, and other wood-based materials. The line is equipped with automatic loading and unloading systems, wide-belt sanders, dust extraction systems, multiple coating stations, UV drying tunnels, and a UV printer. Main equipment of the line: • Automatic loading and unloading systems BARGSTEDT • Pallet storage systems BARGSTEDT • Wide-belt sander BUTFERING OPTIMAT SCR 413/RREE with HEESEMANN EA2 dust extraction • Wide-belt sander BUTFERING OPTIMAT SCR 213/EE • Brush sanding machine SORBINI SMART SAND 1 • Numerous CEFLA conveyors • Roller coating machines: SORBINI KOMPACT SYSTEM SORBINI SMARTCOATER SP1 (several units) SORBINI SMARTCOATER MF (several units) • CEFLA drying tunnels: hot air tunnels IR tunnels UV tunnels (UV 2000 M2, UV 2000 M3) • SORBINI T/20-3-STP UV printing line (3-head) The line enables the execution of a complete technological process: sanding, dust extraction, application of primers and paints, UV curing, UV printing, and final surface finishing. This is an ideal solution for manufacturers of furniture, furniture fronts, decorative panels, and carpentry elements. Machines from renowned manufacturers: SORBINI, CEFLA, BARGSTEDT, BUTFERING, HEESEMANN. Ijdpjzg Epusfx Ahyjbc Sale of the complete line. Viewing is possible by prior appointment. Detailed technical specifications available upon request.

Condition: new, Year of construction: 2026, functionality: fully functional, grinding length: 1,500 mm, grinding width: 300 mm, total length: 3,000 mm, total width: 1,000 mm, grinding height: 150 mm, grinding wheel diameter: 300 mm, table length: 1,500 mm, table width: 200 mm, overall weight: 2,500 kg, grinding spindle motor power: 11,000 W, grinding spindle speed: 1,450 rpm, grinding wheel speed: 1,450 rpm, Equipment: documentation/manual, The GRAFS GRfix-1500e is a heavy-duty surface grinding machine designed for rough and high-performance grinding of steel plates. Developed and manufactured entirely in Poland, this model combines robust construction, long service life, and user-friendly electronic control. Main features: - Electromagnetic table 300×1500 mm, S-pole, holding force 120 N/cm² - Grinding motor 11 kW, high-quality Polish production - Segmented grinding wheel Ø300 mm, 6 aluminium oxide segments - Laser sensor for automatic workpiece height detection (as an additional option) - PLC control (Mitsubishi) with 7” HMI touchscreen – programmable grinding cycles (rough pass, automatic downfeed 0.001–0.05 mm, spark-out, pause, auto-stop) - Stepper motor feed with encoder for precise vertical adjustment - Mitsubishi inverter – variable carriage speed 1–16 m/min - Remote diagnostic support via Internet (Wi-Fi connection) - External coolant filtration system MS60 with rotary magnetic drum separator, 150 L tank, and 60 L/min pump - LED 24V working light and internal coolant pipe for table flushing Iodsxmhyiopfx Ahysbc - Powder-coated body: RAL7012 (frame) / RAL7021 (carriage) Mechanical design: - Extremely rigid welded steel body (10 mm thick plates, stress-relieved) - Carriage on PWTR precision rollers for smooth and silent motion - Replaceable hardened steel guide strips - Quick manual positioning of the carriage above the workpiece - Fast up/down movement of the spindle motor for easy tool change - Easy mounting system for the grinding wheel – only three bolts - Maximum workpiece height: 150 mm Optional equipment: - Accordion-type bellows covers - Alternative coolant filtration units (magnetic, paper, or combined) Advantages: - Perfect for rough surface grinding of large steel plates - Designed for high efficiency and long-term stability - Fully European components – Mitsubishi Electric control system - CE conformity, electrical inspection and Polish technical documentation (DTR) included Warranty: 12 months Technical data summary: Parameter Specification Grinding table: 300 × 1500 mm (electromagnetic, S-pole) Max. workpiece height: 150 mm Grinding wheel: Ø300 mm, 6 segments Spindle motor power: 11 kW Carriage speed: 1–16 m/min Downfeed: Automatic 0.001–0.05 mm Control system: PLC + 7” HMI Mitsubishi Coolant system: MS60 magnetic separator, 150 L tank, 60 L/min pump Weight: ~2800 kg (depending on configuration) Power supply: 400V / 50Hz Made in Poland The GRAFS GRfix-1500e is a professional surface grinder built for intensive, rough grinding applications where high metal removal rate and long-term precision are essential. A reliable, industrial-grade solution for steel fabrication shops, tool manufacturers, and service centers.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total length: 43,000 mm, total height: 3,800 mm, total width: 20,000 mm, type of input current: three-phase, workpiece weight (max.): 200 kg, compressed air connection: 9 bar, workpiece height (max.): 2,400 mm, workpiece length (max.): 7,200 mm, We are offering this BEWAP MACRO 6 POWDER COATING MACHINE – Complete Powder Coating Line 7.2 m, year of manufacture 2015, in very good condition. Ibsdpfjyc S Htsx Ahyec Complete setup for surface treatment, including 2 powder coating booths and 2 curing ovens for powder coating applications. Machine in perfect working order. Year 2015. Surface Treatment Booth (made of 316 L stainless steel, membrane spray pumps, dosing pumps, stainless steel pickling tanks with immersion heaters, rinse tanks, effluent tank, dosing pumps, reverse osmosis unit, water softener) Drying oven (gas burner, control cabinet) 2 manual powder coating booths with automatic feed and extraction Curing oven (gas burner, control cabinet) Structure with manual overhead conveyor: 3 transfer trolleys with 3 lifting beams (200 kg per beam) 2 lift stations for loading and unloading parts 36 lifting beams in total Operation with 3 beams simultaneously Compatible with Qualicoat and Qualilaquage certification Maximum part dimensions per lifting beam: Maximum part length: 7200 mm Maximum part height: 2400 mm Maximum part width: 500 mm (configuration for 1000 mm width possible) The line is to be dismantled and removed on site Price: €150,000 (excl. VAT) If you have any questions or need further information, please do not hesitate to send us a message or call us. Viewing is possible.

Condition: new, Year of construction: 2024, functionality: fully functional, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ Price includes shipping within Germany – No additional transport costs! ✈️ Fast delivery: Only 6 weeks after receipt of payment! PROFESSIONAL POWDER COATING HAS NEVER BEEN THIS EASY! Looking to expand your business and enter the world of professional powder coating? The PEF2.5+ is the perfect solution for beginners! This high-performance system allows efficient, cost-effective, and high-quality coating of car rims and smaller workpieces – with minimal effort! ✨UNBEATABLE PROMOTION – ONLY UNTIL THE END OF MAY!✨ Take advantage of this limited-time offer before it's too late! PONY Luxury Coating – QUALITY THAT CONVINCES! ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✅ 100% European manufacturing – No China products, only top quality built to European standards! ✅ Modular & expandable – Additional options for greater performance and flexibility! Ibedpfx Aewfhu Hjhysc ✅ All spare parts included – Long-term use with no hidden extra costs! ✳️Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today. ✳️ ✨✨Buy directly from the manufacturer and secure price and quality advantages!✨✨ ☘️Environmentally friendly☘️⚡️Green Energy⚡️☘️ Powder oven + powder booth + powder gun Complete Starter Package PEF2.5+ ⭐ Powder oven with electric heating ✔️ INTERNAL WIDTH: 1,505mm ✔️ HEIGHT: 1,800mm (from air duct) ✔️ INTERNAL LENGTH: 2,500mm ✔️ Thermoblock unit dimensions: 785x1800x2210mm; heating capacity is 30 kW/h; recirculation fan is 1.5kW/h – 1 pc.; exhaust fan is 0.54kW/h. ✔️ Double-wing door with thermal insulation and silicone seal. ✔️ Guide rails for rack trolleys are manufactured according to the dimensions specified on the base plates. ✔️ Specially designed air duct for homogeneous air distribution inside the curing oven. ✔️ Electrical panel materials by Siemens and Schneider. This curing oven does not include a PLC system. PLC is available as an option. ✔️ Curing temperature, curing time, and heater unit function are adjustable. At the end of the program, an alarm and light signal from the buzzer will indicate completion. ✔️ Additionally, a product transport trolley with cast wheels is located inside the oven. ⭐ Powder coating booth ✔️ Dimensions: 800x1930x2200mm (including fan) ✔️ Teflon filters: 4 pcs. ➢ Filter suction fan: 4kW x 1 pc. (6,000m3/h – 200mmSS) ✔️ 36W LED lighting x 1 pc. ✔️ Bottom drawer x 1 pc. ✔️ Control panel for air intake and powder spray regulation ✔️ DELTA frequency converter ✔️ Heavy-duty rollers under the coating booth ✔️ Additional filter at the fan outlet ⭐ Powder coating gun E-Coat+3 Master with Multicolor (vibration table) Enquire now – Get your business ready for the future! ☀️ 2-YEAR WARRANTY ☀️ ☀️All our machines are CE-certified and necessary machines have ATEX certificates.☀️

Condition: used, Year of construction: 2022, Operational condition. 2 units available. Ask for additional information! Ibjdpfx Aowctn Hohyoc

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total length: 50,000 mm, We offer this Nordson automatic powder coating line, in very good condition, manufactured in 2016. Iodpfx Asz Dhk Hjhyobc It is fully operational, so you can visit it any day to see exactly how it works. It includes a degreasing area with an acid bath, followed by drying/preheating, painting, and polymerization. If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Year of construction: 2020, condition: used, Offered for sale is a manual powder coating booth with a cartridge filter system. Technical data: Usable volume: 9.5m³, airflow rate: 12000m³/h, downward air velocity: 0.25-0.3m/s, total filter area: 160m², maximum powder melting point: 220°C, maximum dimensions X/Y/Z: 2200mm/200mm/2000mm. Control system: Integrated spray gun and control unit for manual powder coating. Equipment: Booth, platform, filter system, eight cartridges. Operation: 2020/2021 two-shift operation, subsequently approx. 30% daily utilization. System documentation available. Inspection possible by arrangement. Iodpoz Rn Dnsfx Ahyebc

Condition: used, Powder coating booth with filter cart & fluidized bed For sale is a professional, industrial powder coating system from the traditional manufacturer Gema Volstatic. This is the proven MRS system (Multi-Recovery System), which ensures highly efficient powder recovery (overspray extraction) and clean working conditions in the workshop. The system is extremely robustly built and, thanks to the generous manual coating opening, is ideally suited for manual operation (hand coating). Technical data & connection values: • Manufacturer: Gema Volstatic AG • System / Type: MRS booth with filter cart and fluidized bed • Electrical connection: Voltage 3 x 380 V / 50 Hz (standard three-phase) • Compressed air connection (input pressure): min. 6 bar / max. 10 bar (recommended pressure: 7 bar) • Compressed air quality: Water vapor content max. 1.3 g/m³, oil content max. 0.1 ppm • Compressed air consumption (filter plate cleaning): max. 18 Nm³/h • Fan output of the cleaning unit: • For organic powders: Depending on the number of filter plates, from 7.5 kW to 15 kW (volume flow up to 12,000 m³/h) • For enamel powder: From 5.5 kW to 11 kW (volume flow up to 8,800 m³/h) • Fan differential pressure: 4.2 kPa (at 8000 m³/h) to 4.5 kPa (at 12000 m³/h) Dimensions & space requirements: • External dimensions of the booth: approx. Length 6.30 m × Width 2.52 m × Height 3.20 m • Internal dimensions of the booth (working area): approx. Length 6.00 m × Width 1.73 m • Dimensions of the platform: approx. Length 7.64 m × Width 2.45 m × Height 1.16 m Equipment & components: • Booth housing: Solid construction including booth inlet and booth substructure • Filter cart with fluidized bed: Excess powder is drawn downwards The fluidized bed converts the powder into a liquid-like state using compressed air, so that it can be directly reprocessed and reused in the cycle (enormous material savings!) • Cleaning unit: Unit mounted on top, including solenoid valve cover and sealing frame • Safety & control: Integrated pressure monitoring and pneumatic monitoring via the side control unit • Ergonomics: Hand lever valve for easy control directly on the booth, large manual coating opening for the operator, and gun travel slots on the back • CO₂ fire suppression system (fire protection system) Iedpfx Ahez N Aivoyebc Item location: 48683 Ahaus / Ottenstein (Münsterland, North Rhine-Westphalia) Important collection & dismantling options (Please note): Option 1: Dismantling by the buyer The system must be professionally dismantled and transported away by the buyer on site. Option 2: Our "all-inclusive package" (dismantling by us) Alternatively, we will take over the complete, professional dismantling of the system for you. Fixed price for this: €7,500 net (plus VAT). "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Powder coating booth with multi-cyclone and afterfilter For sale is a professional, complete industrial system for powder coating: Ijdpfx Ahjz Nyqwsysbc A Gema Volstatic powder coating booth, type MRS (multi-cyclone recovery system with afterfilter). This system represents the highest Swiss quality, extreme robustness, and maximum efficiency in powder recovery. Thanks to its generous dimensions, it offers plenty of space for long and bulky workpieces. It is ideally suited for industrial companies, powder coaters, or workshops looking for a powerful and reliable system. Technical data: • Manufacturer: Gema Volstatic • Type: MRS (multi-cyclone and afterfilter system) • Electrical connection: 3 x 380 V / 50 Hz • Equipment: Booth base with inlet, manual coating opening, and gun travel slots. • Recovery: Highly efficient multi-cyclone with cleaning flap and powder collection container. • Extraction / Afterfilter: Powerful fan unit with integrated pressure monitoring and automatic flushing air filter cleaning. • Fan power afterfilter:   15 kW with 12 filter plates (air volume flow: 8000 m³/h)   22 kW with 16 filter plates (air volume flow: 12000 m³/h) • Fan differential pressure: 4.2 kPa (at 8000 m³/h) or 4.5 kPa (at 12000 m³/h) • Compressed air connection: Min. 6 bar / Max. 10 bar (Recommended: 7 bar) • Compressed air consumption (flushing air filter box): Max. 18 Nm³/h • External dimensions: approx. Height 3.20 m × Length 8.50 m × Width 1.84 m • Internal dimensions (usable space): approx. Height 2.40 m × Width 1.84 m Item location: • 48683 Ahaus / Ottenstein (Münsterland, North Rhine-Westphalia) Important pickup & dismantling options (Please note): Option 1: Dismantling by the buyer The system must be professionally dismantled and transported away by the buyer on site. Option 2: Our "all-inclusive package" (dismantling by us) Alternatively, we will take over the complete, professional dismantling of the system for you. Fixed price for this: €7,500.00 net (plus VAT). “Everything from one source: We would be happy to offer you a suitable bank financing option for your project.” More items - new and used - can be found in our shop! International shipping costs on request!

Year of construction: 2022, condition: good (used), PLP MT100 Paddle coating machine Ijdpfxez I Dtfs Ahysbc 2022, Stainless, The coating system MT is a complete machine able to mix in line pellets, kibbles, and other granulated products with additives such as liquid enzymes, fat, digest, aromas, oil, medicines, vitamins, complete with two shafts and adjustable paddles to mix and hold the product, capacity up to 50T per hour, with twin 5.5Kw motors, with heating, comes with 1500Kg buffer holding tank, infeed conveyor, paddle coater and outfeed conveyor

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total width: 2,000 mm, total length: 6,000 mm, total height: 2,000 mm, film width: 250 mm, working height: 900 mm, overall weight: 1,200 kg, roll diameter: 700 mm, warranty duration: 6 months, Equipment: documentation/manual, This machine is a used edge-banding machine from the renowned manufacturer Barberán (model RP-30), equipped with a high-quality Düspohl piston melting unit. The system is specifically designed for the professional edge-banding of profiles and offers high flexibility in terms of the materials and adhesives that can be used. Ibjdpfszxh E Ajx Ahyec Key technical features: Application area: Ideal for the precise processing of wood and plastic profiles. Adhesive compatibility: Suitable for processing common hot-melt adhesives such as EVA, PO and PUR. Maximum working width: 250 mm for versatile profile geometries. Modern control system: Equipped with a clear control panel including a display for easy monitoring of process parameters. Efficient melting unit: The integration of the Düspohl piston melting unit guarantees a continuous and material-friendly melting process. The machine is in a ready-to-use condition and is perfectly suited for woodworking and plastics processing companies looking for a reliable solution for profile coating.

Year of construction: 1998, condition: used, Technical details: temperature: 200-210 °C throughput speed: 1000 mm/min max. workpiece length: 200 mm total power requirement: 50 kw weight of the machine ca.: ca. 2,0 t Isdpou Rnd Dofx Ahyjbc - Soldering device for circuit boards (e.g. Type: SMD &/or Composite design) and drying SMD adhesive. - Soldering unit works with functions -->intake - flow - soldering - cooling - With software functions. - Can be integrated in a production line. Further technical details: - Inert gas with Nitrogen 30 m³/h; 6 - 10 bar over pressure - Water requirement: 20 Liter/min; 2 - 5 bar over pressure - Exhaust quantity: 1000m³/h - electr. Operation capacity: 12 kW - room required: L: 6500 + loading station 2000 x W: 1400 x H: 2100mm Supplementary equipment incl.: - Automatic stacker LSB 03 with reloading device and discharge conveyor for intake of e.g. circuit boards - Plant is applicable as spare part deliverer or for refurbishment or rebuild. - Documentation available - Machine is CE98 certified On sale as is. *

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, total length: 1,400 mm, total height: 2,300 mm, total width: 250 mm, workpiece weight (max.): 72 kg, For sale: Nearly new automatic powder coating line, installed in 2023, with approximately 800 operating hours. Current layout footprint: approx. 12 x 28 m, H 5 m. Price and dismantling timeline subject to individual agreements. Layout modifications available: pre-treatment tunnels can be added, and the curing oven can be reconfigured as a straight-through tunnel suitable for parts exceeding 6 meters in length. We can provide a complete quotation including dismantling and international relocation upon separate arrangement. Excellent opportunity to acquire an almost-new line at a lower price and with much shorter lead times compared to a new installation. Monorail conveyor: - Speed: 0.9 – 3.3 m/min - Automatic lubrication - Automatic chain tensioning unit - Chain pitch: 270 mm - Total length: 131 m - Total load capacity: 9500 kg - Steel supports between the floor and conveyor Automatic powder coating booth Gema: - PVC booth: MagicCompact EquiFlow BA04 - MagicControl 4.0 control panel - Photo-cell frame for automatic gun control - 16 x OptiGun GA03-P automatic guns - 1 x OptiSelect GM04 manual gun - 17 x OptiSpray AP01.1 powder feed pumps - OptiCenter OC07 powder feeding system - Ultrasonic sieve US07 for OptiCenter - 2 x ZA07-23 reciprocators with X-axis automatic control - MonoCyclone EZ05-16, 16,000 m³/h - Powder filter: 16,000 m³/h, 30 kW - Big-Bag system for waste powder collection - CO₂ explosion protection system - Manual spray wall / trolley unit shown in pictures NOT INCLUDED Powder curing oven: - Hybrid heating (electricity or gas) — offers unique flexibility to choose the most economical energy source - Installed capacity: 300 kW - Max. temperature: 220°C - Siemens PLC control panel Isdpfsx H Tadex Ahyjbc

Year of construction: 2018, condition: good (used), Gimon RG1000.2000 Drum coating system Ijdpfxjz I Dt Sj Ahyjbc Serial: 14214 2018, Stainless, consists of 1100L stainless hopper on weigh cells, feeds onto continuous conveyor scale, feeds into Gimon disc coater and into Gimon drum coater fat drum, also comes with 1000L stainless IBC previously used for oil,

Year of construction: 1998, condition: used, temperature: 200-210 °C Ibodeu Rwaujpfx Ahyec throughput speed: 1000 mm/min max. workpiece length: 200 mm total power requirement: 50 kw weight of the machine ca.: ca. 2,0 t - Soldering device for circuit boards (e.g. Type: SMD &/or Composite design) and drying SMD adhesive. - Soldering unit works with functions -->intake - flow - soldering - cooling - With software functions. - Can be integrated in a production line. Further technical details: - Inert gas with Nitrogen 30 m³/h; 6 - 10 bar over pressure - Water requirement: 20 Liter/min; 2 - 5 bar over pressure - Exhaust quantity: 1000m³/h - electr. Operation capacity: 12 kW - room required: L: 6500 + loading station 2000 x W: 1400 x H: 2100mm Supplementary equipment incl.: - Automatic stacker LSB 03 with reloading device and discharge conveyor for intake of e.g. circuit boards - Plant is applicable as spare part deliverer or for refurbishment or rebuild. - Documentation available - Machine is CE98 certified On sale as is.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, total length: 9,000 mm, working height: 120 mm, For sale: BARBERAN PUR-33-L profile wrapping machine (year 2010) – machine for laminating elements with decorative foil using PUR hot-melt adhesive (hot gluing). The machine features a single foil feeder, automatic control, and an added antistatic corona system (reduces electrostatic charges – improves foil feed stability). Technical specifications: Model: BARBERAN PUR-33-L Year of manufacture: 2010 Machine length: approx. 9 m Max. element width: 120 mm Feed speed: up to 45 m/min Power supply: 400V / 50Hz Foil feeder: 1 unit Ibjdpfoyw Nxkex Ahyjc Equipment / additional features: Antistatic corona (retrofitted) – neutralizes foil static Printer – enables edge printing (e.g. strip name / operator / description) Glue melter with approx. 60L capacity – allows extended operation without interruption. Important: The machine applies PUR adhesive using hot-melt technology Heaters are NOT included in the set.

Year of construction: 2019, condition: used, LAS coating system, Erlaser Clad, year of manufacture 2019. Ibjdpfx Ajzvwc Sshyjc

Condition: excellent (used), Year of construction: 2014, Roller coater BÜRKLE easy coater RCL 12M and UV system easy cure UV - TRUV with 2 lamps and 2 x roller conveyor BÜRKLE easy coater RCL 1300: For one-sided application on flat surfaces from above Operating side left Touch screen control TP 177 Micro Rubberized application roller Hard chrome-plated metering roller can be sensitively adjusted via worm gearbox Controlled belt transport with exposed counter roller for safe workpiece transport Quick-change system with split bearing and cross-disc coupling for easy changing of the application roller Oscillating squeegee, can be changed quickly for cleaning Separate, infinitely variable FU direct drives for application roller, metering roller and transport Reversible dosing roller Motors and limit switches in Ex version on the machine Non-Ex control cabinet and control panel outside the danger zone on the machine Mobile version Electrical preparation for integrating the roller coating machine into a coating line Technical data Working width: 1300 mm Workpiece height 3 - 80 mm Min. workpiece length 400 mm Rubberized application roller DM 240 mm Chrome-plated metering roller DM 172 mm Transport speed 2 - 15 m/min variable Connected load approx. 2.4 kW Speed of metering roller 1.0 - 3.0 m/min Working height 900 mm (+/- 20) Safety equipment according to CE Incl. switch cabinet Weight approx. 1650 kg UV system e.a.s.y. cure UV - TRUV with 2 lamps One-sided curing of UV-curing lacquers on flat workpieces from above Incl. control cabinet Working width max 1300 mm Workpiece height max 80 mm Number of lamps 2 # - changed 10/2023 UV lamp power 120 W/cm² each Speed 2 - 15 m/min variable Transport: Transport carpet Exhaust air connection 2 x 250 mm Connected load 39 kW Weight approx. 750 kg 2 x roller conveyor RB 1300 Working width 1300 mm length 4000 mm Iodpfxst Dx U Ss Ahyebc Speed 2 - 15 m/min variable Connected load 2 x 0.37 kW Total system length 12450 mm

Condition: good (used), Year of construction: 2004, AUTOMATIC CAB SPRAY CEFLA EASY 2000 D Producer: CEFLA Type: EASY 2000 Year of production: 2004 Product number: 04177/1 Electronic painting system SPRAY CABIN ECOSPRAYER EASY 2000. The gun guide system consists of two carriages (holding 4, 6 or 8 guns each). Electronic regulation of speed and accelerations / decelerations allows for precise painting of objects. The "BACK SPRAY" varnishing system allows for precise and even distribution of the varnish between the edge and the surface. The transport system with a constantly rotating belt allows the recovery of the product splashed (varnish / paint) from the belt. Iedpfx Aozumxmehyebc Working pressure of the feed pump - 6 bar Spraying air working pressure with guns -1 ÷ 4 bar Working air pressure for opening the guns - 5 ÷ 6bar "BRUSHLESS" engine power - 2 kW Gun speed -120m / min Details travel speed - 2-10.6 m / min TRANSPORTER TRC2500 Producer: CEFLA Type: TRC2500 / 2V / 125 Year of production: 2005 Product number: 05026/14 Transporter, 2500 mm long and 1250 mm working width, with two speed ranges: low from 1.7–11.3 m / min (corresponding to the spraying speed of the spray cabin) and high 21.2-59 m / min. Main engine power 1.72 kW. OVEN UNISON 12 M Producer: UNISON Type: UNI-LEVEL 6/12 Year of production: 2010 Length 13500 mm Width 2600 mm Height 2510 mm Weight 6950 kg Power supply 3 x 400 VAC, Hz Air pressure 0.6 Mpa The shelf dryer is used for hot air drying of painted elements in the automatic varnish machine that applies paint coatings using the spray method. The drying room has 6 shelves - each 12.2 meters long. The rated speed of the main conveyor is 4 m / min. TRANSPORTER MCRS PRN 6,3 with belt transformer (II) Producer: MCRS Type: PRN-6.3 Year of production: 2018 Product number: 18014/5