Used Pinacho Sts18-180 for sale (6,339)

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand colour production system, the “Xerox Versant 180 Press” Lodpfx Ajzxwypeb Aohn Items for sale: 1 x Xerox Versant 180 Press with the following specifications: incl. Fiery NX Pro-01 Includes A-CF01 paper deck Includes A-GW03/A-FN13 finisher Includes duplex ADF / R-ADF Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 1,096,427 Black: Approx. 661,731 Colour: Approx. 434,696 Condition: This is a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested for functionality A test print can be seen in the photo Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, Year of construction: 2001, machine/vehicle number: 11572, functionality: limited functionality, operating hours: 47,262 h, overall weight: 1,950 kg, The BTSA 180 is a Bruderer high-speed precision stamping press with a nominal force of 180 kN (18 tons). It is designed for continuous production with progressive dies and variable stroke rates from 100 to 1300 strokes per minute. The press is equipped with a Bruderer BZV 60 strip feeder, which processes strip widths up to 60 mm and material thicknesses up to 2 mm. The stroke is adjustable between 8 and 40 mm, and the strip feed height is adjustable between 50 and 100 mm to accommodate different tools and material profiles. In addition, a Bruderer U control system from Siemens is installed. The machine is partially functional: The buttons responsible for the two-hand control system respond with a delay or not at all in setup mode during material threading, which makes material threading time-consuming. The machine's spring dampers are worn, causing the machine to vibrate significantly during continuous operation. The rubber mounts for the dies are brittle and breaking off. The UVV inspection for 2025 has been carried out, as well as the annual maintenance for 2025. Nominal force: 180 kN (18 tons) Stroke rate: 100-1300 strokes per minute (variable) Strip feed: Bruderer BZA 60 Adjustable stroke: 8-40 mm Main drive: 16 kVA Power supply: 400 V / 50 Hz Table area: 300x400 mm Strip feed height (adjustable): 50-100 mm Max. strip width: 60 mm Max. material thickness: 2 mm Machine dimensions: approx. 1300x1000x2300 mm Weight: 1950 kg Operating hours: approx. 47262 The machine is currently not running but is still connected so that it can be used in an emergency for production. Lhjdpfoz H H Dqox Ab Asn Dismantling and removal are planned for the end of December, as a crane will already be on site by then to load the machine.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 2,974 h, spindle speed (max.): 2,400 rpm, travel distance X-axis: 330 mm, travel distance Z-axis: 1,550 mm, spindle motor power: 4,000 W, total height: 1,850 mm, overall weight: 3,350 kg, controller manufacturer: FANUC, controller model: 0i Mate TC, product length (max.): 3,330 mm, number of axes: 2, Horizontal turning machine manufactured in 2007. This Pinacho Smart-turn6 260 features a distance between centers of 1,500 mm and a maximum turning diameter with soft jaws of 500 mm. It is equipped with a spindle speed of 2,400 rpm and a spindle bore of 80 mm. If you are looking to get high-quality turning capabilities, consider the Pinacho Smart-turn6 260 machine we have for sale. Contact us for further details. • Distance Between Centers: 1,500 mm • Spindle Bore: 80 mm • Maximum Turning Diameter over Cross Slide: 300 mm • Maximum Turning Diameter with Soft Jaws: 500 mm • Spindle Speed: 2,400 rpm • Spindle Motor Power: 4 kW • Connected Load: 17 kW • Tailstock Quill Diameter: 58 mm • Tailstock Taper: Morse 5 (MT5) • Machine Length: 3,330 mm • Machine Height: 1,850 mm • Machine Weight: 3,350 kg • Chuck Diameter: 260 mm Lhjdpjzkr Swefx Ab Aon • Documentation: Operating Manual Included • Condition: Good Condition • Service History: Service Maintained • CE Marked Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, KUKA KR 180 Series 2000 robot with a 3-meter process axis. Max. weight: 180 kg Max. reach: 2700 mm Max. payload: 180 kg Dimensions: 2700 mm Number of axes: 7 Year of manufacture: 2001 Scope of supply: Robot, controller, cables, teach pendant, wiring diagram. Used item – normal signs of wear. Ljdpoz Rl Udjfx Ab Ajhn Further details, article numbers, and images available upon request. Two weeks start-up warranty. No further warranty. Spare parts are continuously available in stock. The robot is fully functional and can be inspected. Free loading / ex-works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on quantity, weight, and desired delivery conditions. Shipping costs to foreign countries on request – please specify country, city, and postal code. Freight costs on request – please specify delivery address.

Year of construction: 2023, operating hours: 400 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 9457SH, ElectroHeat Conveyor Oven - Year 2023 High-quality ElectroHeat conveyor oven in excellent condition, manufactured in 2023. The oven is designed for continuous heat treatment processes and features four independently controlled heating zones. Technical Specifications Manufacturer: ElectroHeat Sweden AB Model / Project No.: 9457SH Type: Conveyor Oven Year: 2023 Maximum temperature: 180°C Power supply: 3 x 400 V + N / 50 Hz Rated current: 50.56 A Internal dimensions: Width: 700 mm Height: 700 mm Length: 5,950 mm Maximum load: 300 kg evenly distributed on the conveyor Approximate weight: 2,800 kg Recommended compressed air supply: 5 bar CE marked Features 4 independently controlled temperature zones Automatic conveyor system HMI touchscreen control panel Integrated safety light barriers Pneumatic vertical doors Continuous production operation Suitable for industrial drying, curing, heating and thermal processing applications Lhedpfj Aayxzex Ab Ajn The oven is currently installed and can be inspected under power by appointment. Condition Very good used condition. Delivery Available immediately, subject to prior sale. Sold as seen and tested.

Condition: used, turning diameter over bed / mm turning length / mm Lhedpezu A T Tofx Ab Aen centre height / mm

Year of construction: 2021, condition: excellent (used), Pump LOWARA ECOCIRC XL 40-180 F Capacity: 8 liters/s. Year of construction: 2021 - Rarely used Flanges DN40 Voltage: 230 V mono Lhsdez Nydwspfx Ab Asn (see technical details on photos)

Year of construction: 2021, condition: excellent (used), Pump LOWARA ECOCIRC XL 40-180 F Capacity: 8 liters/s. Flanges DN40 Voltage: 230 V mono Ledpfxoz Nyd Ds Ab Aehn (see technical details on photos) Year of construction: 2021 - Rarely used

Condition: used, functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 400 V, input current: 45 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,320 °C, inner dimension length: 950 mm, inner dimension width: 500 mm, inner dimension height: 400 mm, overall weight: 900 kg, number of chambers: 1, Equipment: CE marking, documentation/manual, Electrically heated chamber furnace for hardening or preheating forged parts. Lsdez H I N Ispfx Ab Aehn The furnace is in excellent condition and has seen very little use. Maximum temperature: 1,320°C Power: 30 kW Heating power: 1 control zone, zone 1 = 30 kW Thermocouple: Type S with a diameter of 0.35 mm in the ceramic support tube Temperature control: JUMO dTron 304 controller Usable dimensions: 950 x 400 x 500 mm (length x height x width)

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: Custom made, type of input current: three-phase, total width: 1,800 mm, total length: 14,650 mm, input voltage: 400 V, input current: 16 A, cutting width (max.): 1,800 mm, 22 C – Finn-Convey Industrial Spreading Line (14.65 m x 1.8 m) – Complete with Air-Flotation Description For sale is a professional-grade Finn-Convey industrial fabric spreading and cutting table line, offered as a complete production-ready system. This system is designed for efficient fabric spreading and preparation in high-volume cutting room operations. It enables controlled handling of heavy fabric rolls, precise layer alignment, and smooth material flow prior to cutting. The line has been operated as part of a dedicated production setup together with a Bergman cross cutting saw (unit 114 A). Lhjdpoy Au Alsfx Ab Aen This combination allows efficient pre-cutting of fabric rolls into required lengths before spreading, significantly improving workflow efficiency and reducing manual handling. The equipment has been used in a professional garment factory and was operational prior to factory shutdown. Key Technical Specifications • Total length: 14.65 meters (modular structure, adjustable configuration) • Table width: 1.80 meters (suitable for wide fabrics) • Technology: Air-flotation table system for low-friction material handling • Drive system: Motorized side drive units ensuring controlled spreading tension System Components • Finn-Convey motorized side drive units • Industrial air-flotation table structure with perforated surface • Integrated blower system with centrifugal fans under tables • Electrical control cabinet for system operation • Fabric roll handling stands and support assemblies • Integrated end cutting unit with circular blade system Cutting Unit Technical Details • AC speed-controlled motor (Taili Motor Co., Ltd., approx. 90–200W range)14650 • Gear reduction unit (e.g. 5GN-series) for high torque output • Circular cutting blade with integrated sharpening mechanism • Adjustable vertical guide rails for cutting height positioning • Designed for efficient cutting of multi-layer fabric stacks Auxiliary Drive Components • Auxiliary induction motor (e.g. 40W class, speed-controlled) for fine positioning and movement control • Gear-driven transmission for stable and continuous operation • External capacitor-based start system (typical for single-phase auxiliary motors) System Architecture • Modular table construction allowing flexible layout adjustments • Air-assisted material movement reducing friction and operator effort • Cradle-type roll handling enabling tension-free fabric feeding • Encoder-based or mechanical length control depending on configuration • Compatible with upstream roll cutting equipment and manual or semi-automatic workflows Production Advantages • High efficiency with long cutting layouts and reduced material waste • Excellent ergonomics, heavy fabric stacks can be moved with minimal force • Accurate layer alignment supported by controlled drive system • Integrated cutting capability improves workflow continuity • Suitable for a wide range of materials including denim, upholstery, and technical textiles Condition Used industrial condition Removed directly from production after factory shutdown Typical signs of use from industrial environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling strongly recommended due to system size and electrical installation

Year of construction: 2021, condition: like new (used), WeissTechnik ClimeEvent C/180/70a/3 climatic chamber – year 2021 – EXCELLENT CONDITION For sale: a professional WeissTechnik ClimeEvent C/180/70a/3 climatic chamber, manufactured in Germany in 2021. The unit is in excellent technical and visual condition. It has only been used a few times, so it shows minimal signs of wear. Lhedez Tzvvspfx Ab Ajn The chamber was purchased from an official Polish distributor and has been serviced regularly. Key information: * Year of manufacture: 2021 * Used only a few times * Technical and visual condition: EXCELLENT * Unit is 100% functional * Regularly serviced * Purchased from an official distributor in Poland * German production – high quality and reliability Technical specifications: * Manufacturer: Weiss Technik * Series: ClimeEvent * Model: C/180/70a/3 * Year of manufacture: 2021 * Chamber volume: 180 liters * Temperature range: from -70°C to +180°C * Relative humidity control: typically from 10% to 98% RH * Rated current: 15 A * Rated power: 5.3 kW * Power supply: 3/N/PE AC 400 V * Country of manufacture: Germany Temperature and humidity control The WeissTechnik ClimeEvent climatic chamber enables precise environmental testing under controlled temperature and humidity conditions. The humidity control system allows for simulating various climatic conditions, including high-humidity environments, which makes it possible to test the resistance of materials, electronic components, and finished products. Possible applications: * Climatic and environmental testing * Resistance testing to high and low temperatures * Testing under high-humidity conditions * Material aging studies * Testing of electronic components * Quality control in industry * Laboratory and research & development (R&D) studies Condition of the unit The chamber has been used sporadically and is in excellent condition. It represents an attractive alternative to purchasing a new unit, offering professional research capabilities at a significantly lower cost. The unit is fully functional and ready for further use.

Condition: used, turning diameter over bed / mm Ljdpfxszu Dabo Ab Aohn turning length / mm centre height / mm

Condition: excellent (used), Year of construction: 2016, operating hours: 38,950 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 25 mm, Clamping force 1600 kN Mould opening force, max. 240 kN Size of mould platens (h x v) 930 x 860 mm Lhedpfx Ajz N E Egob Asn Distance between tie bars (h x v) 630 x 520 mm Mould opening stroke 450 mm Mould height min/max 300 / 550 mm Max. daylight 1000 mm Hydraulic ejector - stroke 150 mm Ejector force 22 kN Injection unit: Screw diameter 25 mm Ls/D ratio 26 Injection pressure 2500 bar Stroke volume 59 ccm Shot weight (PS) 53,7 gr. Injection rate 147 ccm/s Screw speed 477 1/min Plasticising rate max. 12 g/s Nozzle pressure 30 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 28 kW Installed heating capacity 8,1 kW Adjustable barrel heating zones 5 Dimensions and weights: Dimensions of the machine ca. 6,00 x 2,00 x 2,20 m Total machine weight 13200 kg Max. mould weight 1900 kg Accessories: - Anti vibration pads - Krauss Maffei Robot LRX 100 X: 550 mm Y: 1200 mm Z: 2000 mm C: 0 - 90 ° Additional Options: - 2 x Air valve - 5 x core pulls, Software only - 12 x hotrunner controller - Robot interface according to Euromap 67

Year of construction: 1998, condition: used, Jointer table length: 2100mm, spindle speed: 6000rpm, tool diameter: 100mm, feed roller diameter: 120mm, finished dimensions: 20-180x5-120mm, spindle diameter: 30mm, feed speed: 8m/min, number of planer heads: 4, footprint: approx. 4.62m², length: 3350mm, width: 1380mm, height: 1500mm, weight: 1.57t, an on-site inspection is possible. Lsdpfx Abe Adt Hmj Aohn

Year of construction: 1998, operating hours: 88 h, condition: excellent (used), For sale: water pump, - BBA B156 TW GMC. - Year of manufacture: 1998. - Engine: 11 kW / 1460 rpm. Ledpfxjz Skxlo Ab Aehn - Operating hours: 88. - Capacity: 180 m3/h. - Condition: excellent/like new.

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, operating pressure: 180 bar, empty load weight: 204 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 150 °C, NILFISK MH 7P-180/1260 FAX HOT-WATER PRESSURE WASHER BUILT-IN HOSE REEL The unit comes with new accessories, including a spray gun from the German brand R+M, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. Year of manufacture: 2018 A durable brass pump head, equipped with new ceramic pistons and seals, ensures long-lasting, trouble-free operation. A highly efficient three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 180 bar and a flow rate of up to 1170 l/h, this machine is well-suited for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer is photographed individually; you are purchasing the exact machine shown in the images. TECHNICAL SPECIFICATIONS: Supply voltage [V]: 400 ~3-phase Water flow rate [l/h]: 1170 Operating pressure [bar]: 180 Max. Heating temperature [°C]: 90–150 Connected load [kW]: 7.6 Cleaning agent tank [l]: 10+10 Hose length [m]: 20 Weight [kg]: 204 Lhsdpo Adtagefx Ab Aen EQUIPMENT: BUILT-IN HOSE REEL NEW heavy-duty pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced, steel-braided high-pressure hose (20 m) NEW 25° power nozzle Water filter and GEKA claw couplings – INCLUDED FREE OF CHARGE KEY FEATURES: Open oil system – no operating time restrictions Built-in chemical tank allows for the dispensing of cleaning agents directly through the machine Highly legible and intuitive control panel Simple design with easy access to internal components, making the machine user-friendly and easy to service

Condition: used, functionality: fully functional, In this offer you purchase a used colour production system ‘Xerox Versant 180 Press’ Lhjdpfx Abevtpnlj Aon Object of sale: 1 x Xerox Versant 180 with the following equipment: incl. Fiery Server EX180 incl. Paperdeck A-CF03 incl. booklet finisher incl. Squarefold + Fronttrimmer Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Counter readings: Total: Approx. 2,573,792 pages Colour: Approx. 2,368,409 pages Black: Approx. 205,383 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: excellent (used), functionality: fully functional, - Belt width: 150 mm - Grinding possible on the platen or flat surface - Table angle adjustment - Capability to grind curved elements - Manual table height adjustment Lsdpfxoy N N N Hj Ab Aohn - Motor: 3.4 kW - 380 V - Year: 1992

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 20082, type of input current: three-phase, total width: 2,000 mm, total length: 6,700 mm, input voltage: 400 V, input current: 10 A, 32 C – GERBER XLS-125-180-L Automatic Fabric Spreader – Industrial Spreading System Description For sale is a GERBER XLS-125-180-L automatic fabric spreading machine designed for high-volume textile and garment production. This industrial spreading system enables precise and efficient multi-layer fabric spreading directly onto a conveyor table. The motorized spreading carriage ensures consistent material handling, alignment, and production speed, making it suitable for demanding production environments. The machine is known as a reliable industry workhorse, capable of handling a wide range of materials from heavy denim to lightweight fabrics. Lhodpfx Abey Alcio Aen The system has been operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 cutter (unit 35 C) and FINN-CONVEY V307 conveyor system (unit 30 C). This setup significantly improves production flow, reduces manual labor, and enables continuous high-volume operation. The machine has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video available from operation (05.03.2026). The video material shows the GERBER spreading system in operation together with other cutting line equipment, including a Lectra Vectorfashion VT-FA-Q2-72 CNC cutter (unit 35 C) and a FINN-CONVEY V307 conveyor system (unit 30 C). Includes • GERBER XLS automatic spreading machine • Motorized spreading carriage • Roll holder system • Integrated touchscreen control panel • Fabric alignment and feeding system • Mounted rail system for table operation Technical Details • Manufacturer: Gerber Technology • Model: XLS-125-180-L • Year: 2009 • Serial number: 20082 • Max roll weight: 125 kg • Max roll diameter: approx. 600–650 mm • Machine weight: approx. 400 kg • Spreading width: up to 1800 mm • Speed: up to approx. 100 m/min (material dependent) • Voltage: 3 x 380–415 V • Frequency: 50/60 Hz • Current: approx. 10 A Key Features • Fully automated fabric spreading for reduced manual labor • Suitable for both rolled and folded fabrics • Precision tension control to prevent fabric distortion • Accurate edge alignment for material optimization • Touchscreen interface for easy programming and control • Integrated safety systems including emergency stop and sensors Production Advantages • High precision reduces material waste • Fast spreading significantly improves cutting room throughput • Consistent tension ensures dimensional stability of cut parts • Enables efficient multi-layer cutting preparation Maintenance & Reliability Gerber spreading systems are known for strong spare part availability and long service life. Condition Used industrial condition Fully operational prior to shutdown Recently serviced (27.02.2026) Video available from operation (05.03.2026) Typical signs of use from production environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Typical Applications • Automatic fabric spreading • Multi-layer cutting preparation • Denim and heavy fabric production • High-volume garment manufacturing • Cutting room operations Location Valga, Estonia Removal & Transport Buyer responsible for dismantling and transport Professional dismantling recommended due to system size

Condition: used, Year of construction: 2001, - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-fold tool turret VDI30 - Overhauled 2023 - Year of construction 2001 Technical data Capacity: - Center height: 200 mm - Center width: 1000 mm - Permissible Ø over guide bed: 400 mm - Permissible Ø over longitudinal slide: 370 mm - Permissible Ø over cross slide: 210 mm - Bed width: 300 mm Headstock: - Bore of main spindle: 65 mm Ledpovf I Disfx Ab Ashn - Main spindle nose: Camlock-n°6 / DIN 55027-n°6 - Morse taper of the main spindle: MK5 - Spindle speeds: 2 - Constant cutting speed: 0-750 / 750-3000 rpm Feed rates: - Working feed Z/X: 0 - 7000 mm/min - Rapid traverse Z/X: 10 m/min Tailstock: - Tailstock shank Ø: 58 mm - Tailstock shank travel: 155 mm - Morse taper tailstock: 4 Motors: - Main motor power: 7.5 kW - DC motor Z-axis power: 6.8 Nm - DC motor X-axis power: 3.4 Nm - Motor pump power: 0.57 kW Dimensions: - Machine weight: approx. 2300 kg - Dimensions WxHxD: 2980 x 1730 x 1610 mm

Condition: excellent (used), Year of construction: 1997, Control Fanuc Series 20-T Turning diameter 330 mm Lodps Adl N Hefx Ab Aehn Bar diameter 42 mm Turning length 650 mm Speed 5,000 min-1 8-position turret Minimum quantity lubrication

Condition: used, fuel type: diesel, axle configuration: 4x2, Year of construction: 2017, Equipment: ABS, air conditioning, Iveco Eurocargo ML 180-250 – 2017 – Euro 6: Lhsdpfo Ad N Dzox Ab Aen - First registration: 2017; - 250 hp engine - Euro 6C; - Automatic transmission; - Rear air suspension; - Gross vehicle weight: 180 quintals; - Payload: approximately 104 quintals. Accessories: - Air conditioning, electric windows, ABS, driver’s seat with air suspension, 3 seats in the cab, sun visor, fog lights, cruise control, radio. Body: - Fixed body, 6.44 x 2.48 m (internal dimensions) with 80 cm aluminum side rails; - 15-quintal folding hydraulic tail lift. The vehicle is available for viewing and test drives at: PSL AUTOCARRI SRL Via degli Imprenditori, 45 (Industrial Area) 37067 Valeggio sul Mincio (Verona) Tel. 0457950955. Please contact us to schedule an appointment in order to best organize access to our facilities. For further information, technical clarifications, and to find out the vehicle’s selling price, please contact our sales managers directly at 0457950955. Note: Please note that the vehicle description is indicative and may contain errors or inaccuracies. Interested parties are required to verify the exact correspondence of the vehicle's specifications before proceeding with the purchase. PSL Autocarri Srl declines any responsibility for any errors or inconsistencies contained in this descriptive sheet. Note: We only respond to information requests that include the requester’s name and telephone number.

Condition: ready for operation (used), Year of construction: 2016, clamping force: 1,100 kN, screw diameter: 22 mm, Hydraulic injection moulding machine manufactured in 2016. This Krauss Maffei 110-180-180 CX V features a clamping force of 1,100 kN and a minimum mold height of 377 mm. It includes a screw diameter of 22 mm and a centering ring of 125 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 110-180-180 CX V machine we have for sale. Contact us for further details. • Space between columns: 530 x 470 mm • Minimum mold height: 377 mm • Centering ring: 125 mm • Core pullers: 3 Lodpjz Dk Rvefx Ab Ajhn • Pneumatic valves: 2 • Programmable inputs: 3

Condition: excellent (used), Year of construction: 1998, Rijva EP 180 Strokes per minute: 50 Motor: 8.8 kW Lsdpfx Aoz Ngvysb Ajhn Weight: approx. 12,000 kg

Condition: excellent (used), Year of construction: 2009, Engel e-max 440/180 / All-electric injection moulding machine Year of manufacture: 2009 Lsdpfsz Ipq Nox Ab Ashn Injection unit: Screw diameter: 40 mm Shot weight: approx. 199 g Injection pressure: 1950 bar Shot volume: 220 cm³ Clamping unit: Clamping force: 180 t Tie bar distance: 520 x 520 mm Platen size: 760 x 775 mm Ejector: electric Clamping system: toggle lever Control system: CC 200 - touchscreen Additional equipment: Machine in very good technical condition, operated in a clean production environment All-electric machine: high-speed, energy-saving, and very quiet Euromap 67 interface Robot interface 3 x air valves Hardened injection unit - bimetallic Parallel movements Central lubrication Automatic mould height adjustment Kistler sensor - mould pressure control Original mould crane Dimensions: Weight: 7,200 kg Length/Width/Height: 5.87 x 1.42 x 2.00 m All machines offered are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests carried out on the selected machine, or to participate in live technical demonstrations at our company in Łódź. Price: On request