Used Kraussmaffei Km 650-4300 Cx for sale (12,457)

Condition: excellent (used), Year of construction: 2007, Manufacturer: Krauss Maffei Type: KM 650-3500-700 CZ Year of manufacture: 2007 Control system: MC 4 Clamping Unit: Clamping force: 650 t Opening stroke: 1,150 mm Minimum mold installation height: 600 mm Maximum platen daylight: 1,750 mm Tie bar spacing (h x v): 1,100 x 900 mm Fodpfx Absx Uqa Djgeph Platen dimensions (h x v): 1,510 x 1,370 mm Centering (nozzle-ejector plate): 200 / 200 mm 1st Injection Unit: Screw diameter: 80 mm Maximum shot weight in PS: 1,400 g Shot volume: 1,543 cm³ Injection pressure: 2,205 bar 2nd Injection Unit: Screw diameter: 45 mm Shot weight in polystyrene: 278 g Shot volume: 305 cm³ Injection pressure: 2,336 bar Accessories: 2 x air valves 16-fold cascade 3 x core pullers on moving platen 3 x core pullers on fixed platen 20 x hot runner controllers Robot interface: Euromap 67 Dimensions: Total weight: 34,500 kg Overall size (L x W x H): 7.8 x 2.5 x 2.5 m Operating hours: 45,400 h Machine can also be operated as a single-component machine (1K).

Condition: used, Year of construction: 2006, Injection moulding machine Krauss Maffei KM 800-4300 MX, year 2006 The machine is equipped as follows: Fsdsw Hwr Djpfx Abgeph - 5 hydraulic cascade controls - Injection unit with a 90 - MT5 control system - Krauss Maffei handling system - 2 conveyor belts

Condition: used, Year of construction: 2005, Technical details: screw size: 90 mm injection shot weight in Polysterol: 1.758 g/PS closing pressure: 6500 kN Fpodpfetunccex Abgoh weight of the machine ca.: 32 t Out of serial production *

Condition: ready for operation (used), Year of construction: 2006, operating hours: 58,670 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 45 mm, displacement volume: 318 cm³, Clamping force 1600 kN Mould opening force, max. 87 kN Travel force movable platen opening 45 kN Travel force movable platen closing 38 kN Size of mould platens (h x v) 820 x 845 mm Distance between tie bars (h x v) 520 x 520 mm Mould opening stroke 650 mm Mould height min 300 mm Max. daylight 950 mm Hydraulic ejector - stroke 150 mm Ejector force 23 kN Injection unit: Screw diameter 45 mm Ls/D ratio 22,4 Injection pressure 2336 bar Stroke volume 318 ccm Shot weight (PS) 289 gr. Injection rate 143 ccm/s Screw speed 265 1/min Plasticising rate max. 29,3 g/s Nozzle pressure 50 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 22 kW Installed heating capacity 16 kW Adjustable barrel heating zones 5 Reservoir capacity 489 ltr. Dimensions and weights: Dimensions of the machine ca. 5,00 x 2,00 x 2,20 m Fpodpjydp Idefx Abgeh Total machine weight 6600 kg Max. mould weight 1862 kg Accessories: - Anti vibration pads - Krauss Maffei Robot LR 100 X: 550 mm Y: 1200 mm Z: 1500 mm C: 0 - 90 ° Additional Options: - 1 x Air valve - 2 x hydr. core pulls - 6 x hotrunner controller - Robot interface according to Euromap 67

Condition: ready for operation (used), Year of construction: 2006, operating hours: 68,590 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 50 mm, displacement volume: 393 cm³, Clamping force 1600 kN Mould opening force, max. 87 kN Travel force movable platen opening 45 kN Travel force movable platen closing 38 kN Size of mould platens (h x v) 820 x 845 mm Distance between tie bars (h x v) 520 x 520 mm Mould opening stroke 650 mm Mould height min 300 mm Max. daylight 950 mm Hydraulic ejector - stroke 150 mm Ejector force 23 kN Injection unit: Screw diameter 50 mm Ls/D ratio 20 Injection pressure 1892 bar Stroke volume 393 ccm Shot weight (PS) 358 gr. Injection rate 177 ccm/s Screw speed 265 1/min Plasticising rate max. 36,2 g/s Nozzle pressure 50 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 22 kW Installed heating capacity 16 kW Adjustable barrel heating zones 5 Reservoir capacity 489 ltr. Dimensions and weights: Dimensions of the machine ca. 5,50 x 2,00 x 2,20 m Fpsdoydp D Ejpfx Abgjh Total machine weight 6600 kg Max. mould weight 1862 kg Accessories: - Anti vibration pads - Krauss Maffei Robot LR100 X: 550 mm Y: 1200 mm Z: 2500 mm C: 0 - 90° Additional Options: - 1 x Air valve - 2 x core pull - Robot interface according to Euromap 67

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 70 mm, injection pressure: 2,389 bar, ejector stroke: 135 mm, opening stroke: 1,825 mm, TECHNICAL DETAILS Clamping Unit Clamping force: 6,500 kN Maximum mold opening force: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Mounting platen (H x V): 1,520 x 1,470 mm Clear distance (H x V): 1,000 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 675 mm Daylight: 1,825 mm Ejector stroke: 135 mm Ejector force forward/backward: 226 kN Injection Unit Screw diameter: 70 mm L/D ratio: 23 Injection pressure: 2,389 bar Shot volume: 1,097 cm³ Shot weight (PS): 998 g Injection flow rate: 393 cm³/s Screw speed: 218 rpm Plasticizing rate: 83 g/s Nozzle contact force: 173 kN MACHINE DETAILS Dimensions & Weight Required floor space approx.: 8.70 x 2.90 x 2.80 m Total weight: 44,000 kg Electrohydraulic Equipment Rated power pump motor: 75 kW Installed heating capacity: 36 kW Temperature control zones cylinder heating: 7 Fpsdpfx Aoycqc Tsbgoh EQUIPMENT Oscillating elements 1 x air valve 8-fold pneumatic cascade control Accumulators 2 x hydraulic core pulls at BWAP 2 x hydraulic core pulls at FWAP Robot interface according to EUROMAP 67

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 80-380 CX Injection Moulding Machine Year of manufacture: 2010 Clamping unit Clamping force: 800 kN Mounting plate dimensions (H × V): 670 × 670 mm Space between tie bars (H × V): 420 × 420 mm Mould height (min./max.): 250 mm Maximum opening: 750 mm Injection unit Screw diameter: 40 mm Injection volume: 201 cm³ Shot weight (PS): 183 g Injection pressure: 1860 bar Fodpjxw Upfefx Abgeph Electro-hydraulic equipment Pump motor power: 15 kW Heater power: 10.9 kW Dimensions and weight Machine dimensions (L × W × H): 4.09 × 1.48 × 2.02 m Weight (with control cabinet): 3.55 t

Condition: excellent (used), Year of construction: 2006, Krauss Maffei KM 160–750 CX Injection Moulding Machine Year of manufacture: 2006 Fpjdpfsx Thzpsx Abgeh Fully hydraulic clamping system. MC5 control system with color monitor, integrated operator panel, and built-in USB ports. Plasticizing Unit 1 complete HPS-UN plasticizing unit for thermoplastics: Screw diameter: 50 mm Check valve, open nozzle Nozzle radius: 10 mm Nozzle opening: 4 mm Technical Data Clamping Unit Clamping force: 1,600 kN Mold opening force: 86.4 kN Movable platen force: - opening: 44.8 kN - closing: 37.8 kN Platen dimensions (H × V): 820 × 845 mm Tie bar spacing (H × V): 520 × 520 mm Mold opening stroke: 650 mm Mold height (min.): 300 mm Platen opening stroke: 950 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 50 mm Injection pressure: 1,892 bar Shot volume: 393 cm³ Shot weight (PS): 357 g Screw speed (standard/option): 390 / 490 rpm Electrical and Hydraulic Equipment Pump motor rated power: 22 kW Installed heater capacity: 10.97 kW Number of barrel heating zones: 5 Dry cycle rate (Euromap): 1,600 1/h Oil tank capacity: 489 l Dimensions and Weight Net weight with control cabinet: 6.0 t Machine dimensions (L × W × H): 4.6 × 1.6 × 2.1 m

Condition: excellent (used), Year of construction: 2007, Krauss Maffei Injection Moulding Machine KM 110–750 CX Year of manufacture: 2007 Fully hydraulic clamping system. MC5 control system with color monitor, integrated control panel, and 3 USB ports. Fpodpfxox Avhys Abgjh Plasticizing Unit Complete plasticizing unit for thermoplastics Version with abrasion protection Screw diameter: 40 mm Non-return valve Open nozzle TECHNICAL DATA Clamping Unit Clamping force: 1,100 kN Mold opening force: 70 kN Moving platen force: - Opening: 35.4 kN - Closing: 31.4 kN Platen dimensions (H × V): 745 × 770 mm Tie bar spacing (H × V): 470 × 470 mm Mold opening stroke: 600 mm Mold height (installation): 300 mm Platen opening travel: 900 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 40 mm Injection pressure: 2,500 bar Injection volume: 251 cm³ Shot weight (PS): 228.41 g Screw speed (standard/option): 295 / 355 rpm Electrical and Hydraulic Equipment Pump motor rated power: 22 kW Installed heater power: 15.62 kW Number of cylinder heating zones: 5 Dry cycle rate (Euromap): 2,000 cycles/h Oil tank capacity: 489 l Dimensions and Weight Net weight with control cabinet: 6.2 t Machine dimensions (L × W × H): 4.9 × 1.6 × 2.1 m

Condition: excellent (used), Year of construction: 2008, Krauss Maffei Injection Moulding Machine KM 300-1000 CX Year of manufacture: 2008 Manufacturer: Krauss Maffei Control system: MC 5 with colour monitor, integrated control panel, and disk drive station Clamping system: fully hydraulic Plasticising unit SP 1000 Screw diameter: 50 mm Non-return valve, open nozzle Nozzle radius: 15 mm, bore: 3 mm Clamping unit Clamping force: 3000 kN Opening force: 169 kN Platen dimensions (H × V): 995 × 1050 mm Tie bar spacing: 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight (max. mould open width): 1150 mm Ejector stroke: 200 mm Ejector force (forward/backward): 58 / 28 kN Injection unit Screw diameter: 50 mm Fsdjw U Rcdspfx Abgeph L/D ratio: 22.0 Injection pressure: 2304 bar Injection volume: 432 cm³ Shot weight (PS): 393 g Injection speed: 170 mm/s Injection flow rate: 334 cm³/s Screw speed (standard): 370 rpm Plasticising rate (at standard screw speed): 54.3 g/s Electro-hydraulic equipment Pump motor power: 45 kW Heater capacity: 18.7 kW Number of heating zones: 5 Dry cycle time / stroke per Euromap 6: 2.8 s / 441 mm Oil tank capacity: 720 l Dimensions and weight Net weight (including control cabinet): 12.5 t Dimensions (L × W × H): 6.11 × 2.17 × 2.25 m

Condition: ready for operation (used), Year of construction: 2007, operating hours: 70,000 h, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1520 x 1470 mm Distance between tie bars (h x v) 1000 x 930 mm Mould opening stroke 1150 mm Fjdpfxox Hzzce Abgoph Mould height min 600 mm Max. daylight 1750 mm Hydraulic ejector - stroke 250 mm Ejector force 95 kN Injection unit: Screw diameter 96 mm Ls/D ratio 23 Injection pressure 1795 bar Stroke volume 3367 ccm Shot weight (PS) 3064 gr. Injection rate 690 ccm/s Screw speed 153 1/min Plasticising rate max. 104 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 50 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 9,83 x 2,90 x 2,80 m Total machine weight 43170 kg Accessories: - Anti vibration pads - Krauss Maffei Robot LR300 X: 1200 mm, servo Y: 1000/1000 mm, servo Z: 3500 mm, servo C: 0 - 90° - Conveyor - saftey guard Additional options: - 1 x air valve - 6 x pneumatic sequentional valves - 12 hotrunner controller - 2 x hydr. core pulls on movable plate - 2 x hydr. core pulls on fix plate

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 1,000,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800 Fedpfxsud N Hds Abgeph  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC)  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036721, clamping force: 6,500 kN, screw diameter: 70 mm, clearance between the columns: 1,110 mm, displacement volume: 1,078 cm³, injection pressure: 1,877 bar, injection weight: 981 g, opening stroke: 3,200 mm, plate height: 1,540 mm, drive type: Hydraulisch, clear span: 3,200 mm, tool weight: 2,200,000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX sliding shoe, forces are ideally absorbed and the service life of the moulds is extended. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24'' TFT color screen with multitouch functions CLAMPING UNIT - Clamping force: 6500 kN - Max. mould opening force: 455 kN - Daylight opening (h x v): 1110 x 960 mm - Platen size (h x v): 1540 x 1440 mm - Mould installation height min. - max.: 1550 mm (without centre platen) - Opening stroke: 3200 mm - Max. mould opening distance: 1650 mm - Max. mould weight: 22,000 kg INJECTION UNIT 1 SP2000 - Screw diameter / type: 60 mm / thermoplastics - Effective L/D ratio: 23.3 - Injection pressure: 2420 bar - Shot volume: 792 cm³ - Shot weight at max. stroke for PS: 720 g - Injection speed: 140 mm/s - Injection throughput: 396 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 72.2 g/s - Nozzle contact force: 82 kN INJECTION UNIT 2 SP2000 - Screw diameter / type: 70 mm / thermoplastics - Effective L/D ratio: 20 - Injection pressure: 1877 bar - Shot volume: 1078 cm³ - Shot weight at max. stroke for PS: 981 g - Injection speed: 140 mm/s - Injection throughput: 539 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 98.3 g/s - Nozzle contact force: 82 kN ELECTRICAL PARAMETERS - Connected load: 341 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral conductor Fpjdpfx Absw U N Ixogjh WEIGHT & DIMENSIONS - Net weight: 43.5 t - L x W x H: 11.89 x 3.22 x 2.77 m ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) - Mould heating: 96 zones (3.5 kW each) - Euromap interface for handling: E18 - Euromap central computer interfaces: E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical centre platen - Parallel clamping & opening during injection process with bar parallelism control between FWAP and centre platen or BWAP and centre platen - ColorForm interface signal interface for connecting an RPM unit - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: excellent (used), Year of construction: 2012, 1,0 St. gebr. Spritzgießmaschine Hersteller: KRAUSS MAFFEI Typ: KM420-4300CX Baujahr: 2012 Schließkraft: 420 Tonnen Holmabstand 800 x 800 mm Schnecken DN: 80 mm Max. Hubvolumen: 1.810 cm³ Spritzteilgewicht: 1.647 g/PS Fpsdpfx Abjyak Ecogoh Steuerung: MC6 Ausstattung: 2 St. Kernzug Schnittstelle Roboter 12- Fach Heisszonenkanalregelung Schnittstelle Temperiergerät

Condition: excellent (used), Year of construction: 2010, 1,0 St. gebr. Spritzgießmaschine Hersteller: KRAUSS MAFFEI Typ: KM300-1900CX Baujahr: 2011 Schließkraft: 300 Tonnen Holmabstand 630 x 630 mm Schnecken DN: 60 mm Max. Hubvolumen: 769 cm³ Spritzteilgewicht: 692 g/PS Steuerung: MC5 Ausstattung: 3 St. Kernzug Djbr Rvoxyrc Isf Nysul Schnittstelle Roboter Fpjdpfx Absx Tbfuogoh 45- Fach Heisszonenkanalregelung Schnittstelle Temperiergerät Ca. 51.000 Betriebsstunden

Condition: excellent (used), Year of construction: 2018, Krauss Maffei KM 200-1400 CX with Krauss Maffei LRX Easy Control 100 Robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection Unit: Screw diameter: 60 mm Shot weight: 617 g Injection pressure: 2007 bar Dosage volume: 679 ccm Clamping Unit: Clamping force: 200 t Tie bar distance: 560x560 mm Platen size: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC6 – touchscreen Additional equipment: Very good technical condition Operating hours: 12,000 h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Hydraulic core pull x 3 Pneumatic core pull x 3 Control system for hot runner zones x 10 Hardened injection unit – bimetallic Energy-efficient machine – features a system with 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Machine manufactured in December 2018, delivered to customer in 2019 Krauss Maffei LRX Easy Control 100 Robot Fodpjzc Nwvefx Abgoph Year of manufacture: 2019 4-axis robot: 3 axes driven by servo motors (electric); axis C – pneumatic Touch control panel Safety package for robot Robot with interface, conveyor belt, and safety enclosure Purchase of robot and conveyor belt at additional cost Dimensions: Weight: 11,500 kg Length/Width/Height: 6.10x2.20x2.30 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine, or to participate in live technical demonstrations at our premises in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 35-55 CX / machine in very good technical condition Year of manufacture: 2008 injection unit: Screw diameter: 18 mm injection weight: 18 g injection pressure: 2500 bar Dosing volume: 20 ccm Clamping unit : clamping force: 35 t tie bar distance: 320x320 mm size of clamping platens: 540x540 mm Ejector: hydraulic clamping unit: hydraulic Control: MC V - touch screen Additional equipment: Machine in very good technical condition Euromap 67 Robot interface Air valve x 2 Control with hot runners x 6 injection unit hardened - bimetal The machine has been regularly serviced by the authorized service Krauss Maffei in Germany. It is possible to change the screw diameter for fi 20 mm, 22 mm Dimensions: Weight: 2600 kg Length/width/height: 3.50x1.40x1.70 m Drive: Fsdpfszc Nfyex Abgoph Pumps/motor: 11 kW Heating power: 3,78 kW Total power: 14,78 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: ready for operation (used), Year of construction: 2010, operating hours: 60,159 h, clamping force: 5,000 kN, screw diameter: 90 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, This 3s Krauss Maffei 500-4300 CX was manufactured in 2010. It features a clamping force of 5000 kN and a maximum shot weight of 2084 g, making it suitable for high-quality injection molding applications. With a screw diameter of 90 mm and an injection pressure of 1839 bar, this machine offers robust performance. Consider the opportunity to buy this Krauss Maffei 500-4300 CX hydraulic injection moulding machine. Contact us for further details. • Clamping unit • Tool weight: DS 3950 kg / AS 5260 kg (total 7900 kg) • Min. tool diameter: 560 mm • Opening stroke: 1170 mm • Tool installation height: min 480 mm; max – • Max plate spacing: 1650 mm • Mounting plates (H × V): 1270 × 1200 mm • Clear column spacing: H 900 mm / V 800 mm • Centering ring diameter: 200 mm • Ejector • Stroke: 250 mm • Ejection force: 95.4 kN • Retraction force: 48.6 kN • Pneumatic ejector: yes • Core pulls / controls • Core pull control: 2 (AS) + 2 (DS) • Closing nozzle: 2 hydraulic / 0 pneumatic • Process control (SPC): yes (Kistler, p=2 / t=0) • Printer interface: no / 12-port USB • Hot runner control: no • Injection unit 1 • L/D ratio: 20 • Screw diameter: 90 mm • Max. stroke volume: 2290 cm³ • Max. shot weight (PS): 2084 g • Injection pressure: 1839 bar • Plasticizing rate: 185.8 g/s • Screw speed: 270 rpm • Nozzle bore: 6 mm • Pump power / Heating power: 90 kW / 44 kW • Other Fsdjyg Hz Hspfx Abgjph • Max. crane load: 10 tons • 2K-capable: no • Filter nozzle/mill: no • It is a standard fully hydraulic 2-plate clamping system with fully hydraulic screw drive and constant motor. • Operating hours: 60,159 h Additional equipment • Linear robot: KRC6-2 ARC-C • Axes: X/Y (standard), Z present

Condition: excellent (used), Year of construction: 2014, operating hours: 47,137 h, functionality: fully functional, machine/vehicle number: 61020607, clamping force: 1,300 kN, clearance between the columns: 470 mm, Here we, as dealers in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Important current notice – Tax information and benefit for used machines: From 01.07.2025, used machines will also be eligible for a special tax depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth booster (§ 7 paragraph 2 EStG-E). Manufacturer: Krauss Maffei Model: KM 130 750-130 CXV BluePower 2-color 2-component machine Control system: MC6 Year: 2014 Machine no.: 61020507 Operating hours: 47,137 h Complete maintenance records for the last 7 years / 25,000 operating hours 1st injection unit 750 horizontal Screw diameter: 50 mm Injection volume: 393 ccm Shot weight: 357 g Heating capacity: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1,892 bar 2nd injection unit 180 vertical Screw diameter: 30 mm Injection volume: 85 ccm Shot weight: 77 g Injection pressure: 2,500 bar Clamping unit Clamping force: 130 t / 1,300 kN Opening stroke: 600 mm Tie bar spacing: 470 x 470 mm Plate size: 745 x 770 mm Max. daylight: 900 mm Min. mould installation height: 300 mm Ejector stroke: 150 mm / ejector force: 23 kN Dimensions: 4.39 x 1.61 x 4.01 m Weight: 9,000 kg Extras – complete machine data sheet attached as PDF document Nozzle side: Needle shut-off A+C 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blast Fjdpfx Abjyf Uy Uegjph Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blast Water BGS: 6 circuits each on nozzle and ejector side BluePower technology: up to 40% energy savings The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Free loaded onto buyer’s truck or delivered free to destination against reimbursement of freight costs. For information about the machines we offer and our company: - We only sell our own machines, purchased from ongoing production, from our warehouse in Hanover - All machines offered are inspected and tested prior to dismantling - We do NOT sell insolvency assets – we are NOT intermediaries trading in third-party property - All machines offered come from successful companies for whom regular maintenance is a given - All offered machines are available for viewing at our warehouse

Year of construction: 2008, condition: good (used), For sale is a Krauss Maffei brand injection molding machine type KM 110-380 Fodpfjibyatjx Abgoph The machine is in a good to very good condition, all maintenance and inspections have been performed Technical data: Year of manufacture 2008 Extended tie bars Pneumatic valve gate 2X Hydraulic core puller 31000 operating hours Cylinder D35mm Mould closing force: kN 1100 Mold opening force: kN 70 Euromap63 interface for version > 1-04-09 Nitrogen battery present Included component Wedge shoes with bolts and nuts Double bit wrench Declaration of conformity cpl switchboard Certificate USB memory stick Ejector coupling-mechanical Enclosed in the control cabinet All prices plus VAT Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: excellent (used), Year of construction: 2011, operating hours: 28,000 h, functionality: fully functional, clamping force: 1,300 kN, For sale is a hybrid injection molding machine, 2 components, of the brand KraussMaffei and type KM 130-750 CX The machine is in very good condition, ready for immediate use, with low operating hours. Electronic injection unit and dosing unit, hydraulic clamping unit. Technical data: Year of construction: 2011 Operating hours: 28,000 h Clamping force: 130 T Cylinder Ø 30mm / 40 mm (& 2*50mm additional) Core pull: 1*Hydraulic Valve gate: Pneumatic Tie bar extension: 160 mm Internal pressure transducer Selector switch On request, transportation and loading can be organized at an extra charge. can be organized throughout Europe. Prices plus VAT Fjdpfx Absu Hxm Uegsph Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 420-3000 CX Injection Moulding Machine Year of manufacture: 2011 Control system: MC5 Clamping Unit: Clamping force: 4,200 kN Tie bar spacing (H x V): 900 x 800 mm Platen dimensions (H x V): 1,400 x 1,250 mm Min. mould height: 780 mm Max. daylight between platens: 1,400 mm Ejector stroke: 250 mm Ejector force (forward/back): 95.4 / 48.6 kN Max. mould weight: 6,700 kg Injection Unit: Fpedjydbbvspfx Abgeh Screw diameter: 80 mm Injection pressure: 1,856 bar Shot volume: 1,608 cm³ Shot weight (PS): 1,464 g Injection rate: 478 cm³/s Screw speed: 220 / 285 rpm Nozzle contact force: 129.4 kN Additional Equipment: 2 x hydraulic nozzle controls (GK) 2 x hydraulic core pulls – moving platen 1 x hydraulic core pull – fixed platen Masterbatch dosing unit control 14 GK zones Electrical and General Data: Pump motor power: 75 kW Installed heating power: 36 kW Power supply: 400 V / 50 Hz Oil volume: 1,075 l Machine weight: 23.7 t Dimensions (L x W x H): 7.3 x 2.6 x 2.5 m

Condition: like new (used), Year of construction: 2007, operating hours: 27,000 h, clamping force: 6,500 kN, KraussMaffei KM650-3500 C2 injection molding machine for sale. The machine is in very good condition. It has only been operated in single-shift production and used exclusively for small batch and sample production. A new hydraulic pump was recently installed (approx. 300 operating hours ago). Fedpfx Ajyn Sc Eebgjph - 27,000 operating hours - Year of manufacture: 2007 - MC4 control system - Core pulls on both sides - Tie bars and guideways are undamaged and in like-new condition - Robot with longitudinal take-out LR300 and conveyor belt - Proportional valves, HPS screw, bimetallic cylinder - Total weight approx. 30,000 kg - Opening stroke: 1,150 mm Adapter plates are also available from us. Inspection under power is possible. Other accessories such as Motan dryer, chiller unit, and much more available upon request. The machine can be dismantled and loaded by us upon agreement. We look forward to your inquiry.

Condition: used, Year of construction: 2006, operating hours: 60,000 h, Injection molding machine Krauss Maffei 50-180 CX Fedpev Tmzpofx Abgoph Year 2006 screw di 30

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 95 mm, clearance between the columns: 1,120 mm, injection pressure: 1,795 bar, ejector stroke: 250 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping Unit Fpsdpfxoy Ulhco Abgsh Injection force: 8,000 kN Distance between columns (h x v): 1,120 mm x 1,000 mm Maximum mold opening distance: 1,400 mm Minimum/maximum tool mounting height: 600 mm / 1,100 mm Opening stroke of the clamping plate: 2,000 mm Ejector stroke: 250 mm Ejector force: 226 kN (rearward: 59 kN) Injection Unit Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1,795 bar Injection volume: 3,367 cm³ Injection size for PS: 3,064 g Injection rate: 690 cm³/s Nozzle clamping force: 166 kN MACHINE DETAILS Control model: MC4 Connected power of pumps: 90 kW Heating capacity: 61 kW Dimensions & Weight Machine dimensions (L x W x H): 10.4 m x 2.86 m x 2.39 m Net weight: 45 t