Used Injection Moulding Machines Up To 5000 Kn for sale (86,427)

Year of construction: 2014, condition: ready for operation (used), Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20. Gbjdpfx Akjh Nypfo Uet

Year of construction: 2011, condition: ready for operation (used), A virtually new and almost fully equipped Arburg vertical injection molding machine from a laboratory is available, where its plasticizing unit was never used. Clamping force: 500kN, opening force: 30kN, opening stroke: 250mm, ejector force: 30kN, ejector stroke: 70mm, screw diameter: 25mm/30mm/35mm, nozzle contact force: 50kN, nozzle retraction stroke: 210mm, heating capacity: 9kW, heating zones: 5, hopper volume: 25l, technology level: T2, rotary table diameter: 900mm. Machine dimensions X/Y/Z: approx. 3400mm/2050mm/3500mm, weight: approx. 4200kg, operating hours: 9201h, machine cycles: approx. 120k. The machine was used exclusively for composite materials such as carbon fiber and Kevlar. Documentation available. An on-site inspection is possible. Gedpfx Akozd Ehxj Uobt

Condition: used, Condition: used, with visible signs of use, was operational until placed in storage, control voltage: 24V, operating voltage: 230V, frequency: 50Hz, CO₂ pressure: 10bar, connected load: 500W, with CE marking. An on-site inspection is possible. Gsdpfx Aszwgiksk Ujbt

Year of construction: 1995, condition: used, Clamping force: 6500kN, locking force: 7150kN, max. opening stroke: 930mm, mold height: 360-920mm, max. distance between mold mounting platens: 1850mm, mold mounting platens: 1350x1350mm, clear tie-bar spacing: 900x900mm, max. mold weight: 8.6t, max. weight on moving mold mounting platen: 5.7t, screw diameter: 110mm, L/D ratio: 17.2, injection pressure: 1270bar, shot volume: 3570cm³, shot weight (PS): 3180g, max. metering stroke: 375mm, max. nozzle stroke: 850mm, nozzle immersion depth (SVO): 70mm, nozzle contact force: 200kN, installed barrel heating capacity: 52kW, hopper capacity: 110l, the machine screw is defective. With documentation. An on-site inspection is possible. Gbsdpszzqcpofx Ak Ust

Year of construction: 2012, condition: ready for operation (used), Installation height min./max.: 200mm/595mm, opening stroke: 200mm, closing force: 600kN, screw diameter: 25mm, distance between tie bars: 370mm, max. injection volume: 49cm³, operating hours: 55682h. Documentation available. On-site inspection is possible. Gbodpfx Akot E Tq Rs Ujt

Year of construction: 2015, condition: ready for operation (used), Two complete injection molding facilities with two Husky injection molding machines, five complete tools with metal separator, gravimetric Motan mixing system and crane system are available. 1) 2x Husky H-PET230 AE RS95, year of construction: 2015, max. shot weight: 2424g, max. PET throughput: approx. 390kg/h. 2) 48-cavity H-PET mold, preform weight: 17.8g, length: 89.35mm, wall thickness: 3.06mm, bottom thickness: 2.30mm, cavities: 48, cycle time: 12.1s-12.7s. 3) 48-cavity H-PET mold, preform weight: 30.26g, length: 122.3mm, wall thickness: 3mm, bottom thickness: 2.3mm, cavities: 48, cycle time: 14.4s-15s. 4) 32-cavity H-PET mold, preform weight: 18g, length: 82.04mm, wall thickness: 2.7mm, bottom thickness: 2.2mm, cavities: 32, cycle time: 11s-11.7s. 5) 32-cavity H-PET mold, preform weight: 29g, length: 108.59mm, wall thickness: 3.16mm, bottom thickness: 2.42mm, cavities: 32, cycle time: 13.4s-14s. 6) 48-cavity H-PET-AE mold. Total system dimensions X/Y/Z: approx. 24m/13m/5.5m. Including drying unit, mold dehumidification, color mixing devices and T-conveyor. Documentation available. An on-site inspection is possible. Gedpew Az Rijfx Ak Ujbt

Year of construction: 2013, condition: ready for operation (used), Installation height min./max.: 250mm/750mm, opening stroke: 500mm, clamping force: 1000kN, screw diameter: 35mm, distance between tie bars: 420mm, max. injection volume: 144cm³, operating hours: 54164h. Documentation available. On-site inspection is possible. Gjdpet E Trbefx Ak Usbt

Year of construction: 2005, condition: used, Max. locking force: 3500kN, clear tie-bar spacing: 710x710mm, min. mold height: 380mm, max. opening stroke: 1300mm minus mold height, max. ejector stroke: 250mm, max. ejector force: 95kN, ejector retraction force: 48kN, rotary table diameter: 890mm, screw diameter K1: 60mm, K2: 35mm, nozzle radius: 15mm, max. injection pressure K1: 2000bar, K2: 2429bar, max. shot weight (PS) K1: 618g, K2: 142g, hot runner: external, core pull connection: DNP Flatface BG3 (large flat-face sealing), centering mandrel: AS + DS, weight: 16.37t, total operating hours: 74,276h, production hours: 66,341h, the second injection unit and the rotary table have not been used for five years, with documentation and linear handling system, regularly maintained in-house. An on-site inspection is possible, the machine is not connected to power. Gbjdpezzqmnofx Ak Ujt

Year of construction: 2005, condition: ready for operation (used), There are two BOY 55M available, both year of construction 2005. Clamping force: 550kN, screw diameter: 38mm, stroke volume: 196cm³, injection pressure: 2000bar, platen dimensions: 565mm/540mm, tie bar distance: 360mm/335mm. Workpiece height min./max.: 250mm/650mm, opening stroke: 400mm, max. platen distance: 1050mm, ejector stroke: 80mm, max. mold weight: 600kg. Dimensions X/Y/Z: approx. 3300mm/1200mm/2100mm, weight: approx. 2300kg, operating hours: 29664h, control: Procan MD. Robot interface Euromap 12 included. Gbjdpfxetyaypo Ak Ust

Year of construction: 2007, condition: ready for operation (used), Various injection molding machines are available. 1) Arburg Allrounder 420 A 1000-400, clamping force: 100t, screw diameter: 30/35mm, year of manufacture: 2005. 2) Demag 1000-420-310 EL-Exis S, clamping force: 100t, screw diameter: 30mm, year of manufacture: 2003. 3) Demag 1000-420-200 EL-Exis S, clamping force: 100t, screw diameter: 25mm, year of manufacture: 2003. 4) Arburg 570 C 2000-150/60 2K, clamping force: 200t, screw diameter: 25/12+15mm, year of manufacture: 2007. 5) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 35mm, year of manufacture: 1996. 6) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30/25mm, year of manufacture: 1995. 7) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30mm, year of manufacture: 1994. 8) Netstal Synergy 600-110, clamping force: 60t, screw diameter: 25mm, year of manufacture: 2001. 9) Arburg 900T 800-150, clamping force: 80t, screw diameter: 25mm, year of manufacture: 2001. 10) 2 KM SilcoStar 922A, year of manufacture: 2007. On-site inspection is possible. Individual sale possible. Some machines are partially dismantled and/or defective. Gbodpfjwkiicsx Ak Ust

Year of construction: 2016, condition: ready for operation (used), A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 9171h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible. Gbedjyab I Uspfx Ak Uot

Year of construction: 2014, condition: ready for operation (used), An ENGEL injection molding machine is offered. Clamping force: 1800kN, opening force: 96kN, max. opening stroke: 750mm, min. mold height: 300mm, max. platen distance: 1050mm, clear tie-bar spacing: tie-bar-less, mold mounting platens X/Y: 880mm/830mm, max. mold weight: 1500kg at center of gravity 230mm, ejector stroke: 180mm, ejector force forward/backward: 80kN/33kN, screw diameter: 55mm, metering stroke: 215mm, max. stroke volume: 510cm³, injection rate: 255cm³/s, max. injection pressure: 2050bar, nozzle stroke: 350mm, nozzle contact force: 67kN, injection unit heating capacity: 16.3kW, heating zones incl. nozzle: 5, barrel: M9 bimetallic barrel, integrated hot runner control zones: 24×220V, mold cooling circuits: 6×10l/min, hydraulic oil capacity: approx. 540l, operating hours: 67423h (as of 30.06.2026). The machine will be available from December. Machine dimensions X/Y/Z: approx. 6275mm/1888mm/2100mm, weight without mold: approx. 12200kg. Documentation available. An on-site inspection is possible. Gedpfx Aezt Slpsk Usbt

Condition: repair required (used), Injection moulding machine, Engel ES 330/85, Used machine As shown in the pictures, its working condition is uncertain. Overall dimensions :3100 x 1950 x 2600 mm Weight: 5500 kg Manufacturer: Engel Type: ES 330/85 Year of manufacture: 1997 Godjukn S Hopfx Ak Uebt Electrical data: 380V, 60 A, Contoller cards: Keba PS 244; Keba DO 321; Keba DO 321; Keba DO 321; Keba DI 325; Keba DI 325; Keba DI 325; Keba TT 081; Keba AR 181; Keba PD 242; Keba CU 211

Condition: used, 1.0 piece. Nozzle for injection into the parting line. Manufacturer: ARBURG Gsdpfozxtcysx Ak Uobt For machine models 270.

Year of construction: 1997, condition: ready for operation (used), Clamping force: 400kN, heating output: 5.5kW, connected load: 20.5kW, weight: 4.7t, operational hours counter: 18,287h, an inspection is possible. Gjdpfxerc Hibo Ak Uobt

Condition: used, Year of construction: 2001, Technical details: screw size: 105 mm injection shot weight in Polysterol: 4.940 g/PS closing pressure: 9000 kN weight of the machine ca.: 19 t Out of serial production Machine and Robot condition regularly checked by EngelCare program Linear robot on machine was fully refurbished in 2021 Gbodpfetuncvjx Ak Ujt *

Year of construction: 2005, condition: ready for operation (used), A total of four Engel injection molding machines are available. 1) Engel ES 80/25 HL-V, year of manufacture: 1999, the machine is a defective spare parts carrier. 2) Engel ES 80/25 HL-V, year of manufacture: 2001. 3) Engel VC 200/45 Tech, year of manufacture: 2004. 4) Engel e-Motion 200/55, year of manufacture: 2005. Documentation available. On-site inspection is possible. Individual sale possible. Gedpjv Extzsfx Ak Usbt

Year of construction: 2002, condition: ready for operation (used), Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available. Gsdpouiykdefx Ak Ujbt

Year of construction: 2008, condition: used, Clamping force: 650kN, length: 4000mm, width: 1600mm, height: 2200mm, weight: 3.9t, an on-site inspection is possible. Godpfozybvkex Ak Ujbt

Year of construction: 1992, condition: ready for operation (used), An injection molding machine Dr. Boy is available. Clamping force: 500kN, tie-bar spacing: 305mm/305mm, platen dimensions X/Y: 500mm/500mm, max. opening stroke: 350mm, max. platen spacing: 600mm, min. mold height: 250mm, max. screw stroke: 120mm. Machine dimensions X/Y/Z: approx. 3450mm/1050mm/2000mm, weight: approx. 2050kg. The system has minor defects requiring repair. Documentation available. An on-site inspection is possible. Gbjdpfx Akeyw Svfs Uet

Condition: used, Year of construction: 2013, operating hours: 55,929 h, clamping force: 160 kN, displacement volume: 23 cm³, injection pressure: 2,500 bar, overall weight: 6,000 kg, screw conveyor diameter: 18 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Gbjdjzp R I Iopfx Ak Ust

Year of construction: 2001, condition: used, Clamping force: 1250kN, tie-bar spacing: 475x450mm, injection unit: 440, max. flow rate: 100l/min, max. hydraulic pressure: 190bar, weight: 6.6t, an on-site inspection is possible. Godpfxjzybu To Ak Uobt

Year of construction: 2005, condition: used, Clamping force: 1500kN, rated current: 133A, connected load: 74kW, an on-site inspection is possible. Gbsdpfx Akjzybvqo Uet

Year of construction: 2005, condition: used, Clamping force: 1600kN, width: 1600mm, height: 2200mm, weight: 6.8t, an on-site inspection is possible. Gbsdpfxjzybvdo Ak Ust

Condition: repair required (used), Year of construction: 2001, functionality: limited functionality, clamping force: 500 kN, clearance between the columns: 305 mm, mold height (min.): 250 mm, plate length: 500 mm, plate height: 500 mm, total length: 3,450 mm, total width: 1,050 mm, total height: 2,000 mm, overall weight: 2,050 kg, Equipment: documentation/manual, Clamping force: 500 kN (50 tons) Gsdpfx Akozx Agns Uebt Column spacing (H x V): 305 x 305 mm Dimensions of the mounting plates: 500 x 500 mm Maximum mold opening stroke: 350 mm Minimum mold height: 250 mm Maximum distance between the plates: 600 mm Maximum screw stroke: 120 mm Injection pressure: up to approx. 1900 bar (depending on the screw diameter) Stroke of the hydraulic ejector: 80 mm Machine weight: approx. 2050 kg Overall dimensions: approx. 3450 x 1050 x 2000 mm Defective control system!!!