Used Hardinge Bridgeport Xp1000 for sale (82)

Condition: good (used), Year of construction: 2008, operating hours: 32,180 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 540 mm, total height: 2,650 mm, total length: 2,350 mm, total width: 2,250 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 10,080 h, number of slots in tool magazine: 20, Equipment: documentation/manual, Bridgeport GX600 Year of manufacture: 2008 Coolant collection tank HDH530 control system SK40 tool holders 20-position tool changer Coolant spray gun The machine has been serviced annually. Laedpfx Aljz Eh Izsbsh It was used to machine almost exclusively aluminum (99%). The spindle was completely overhauled one year ago. The M&h tool measurement sensor is also approximately one year old.

Condition: good (used), Year of construction: 2012, Traverses X Y Z; 1020 x 610 x 610mm, Laodpjz Ehxgofx Albjh Table size 1200 x 600mm, Table load 700Kgs, Table to spindle 100-710mm Spindle taper BT40, Spindle speed 12,000rpm, spindle motor 18.5KW, 30 station ATC, Heidenhain TNC530, through spindle coolant, swarf conveyor 4th and 5th axis unit.

Condition: used, Hardinge HLV-H High Speed Super Precision Tool Room Lathe Max’ Distance Between Centres 18” Max’ Swing over Bed 11” Max’ Swing Over Carriage 9” Max’ Swing over Cross Slide 6” Spindle Capacity: Though Spindle - 1 1/4” 5C Round Collets - 1 1/16” 5C Hex Collets - 7/8 5C Square Collets - 3/4” With Step Chucks – 1 1/16” to 6” With Jaw Chuck (Through Spindle) - 1 5/32” With Expanding Collets 3” Variable Spindle Speeds - 125 to 3000 rev/min Tailstock M/T 2 3 Phase Electrics Net Weight (approx.) 750Kgs Ljdpfx Alsy Nfqmebsah Supplied with: 2 Axis Digital Readout 4 Jaw Chuck Faceplate 3 off Multifix Tool Holders Set of Misc’ 5C Collets For Sale Jet Machinery Ltd Jet Machinery Stock No: #79017 Machine Serial Number: HLV-H14793T Cost: £8,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 1997, functionality: fully functional, spindle bore: 66 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 185 mm, travel distance Z-axis: 540 mm, quill travel distance: 130 mm, quill diameter: 80 mm, BRIDGEPORT ROMI POWERPATH 15 - Manufacturer: Bridgeport / Romi - Model: PowerPath 15 - Year: 1997 - Machine Type: CNC Turning Center - CNC Control: Fanuc Series 21i – To be confirmed - Number of Axes: 2 Lsdpfjzvf Dwsx Alboah - Chuck Size: Approx. 203 mm / 8" - Swing Over Bed: Approx. 440 mm - Maximum Turning Diameter: Approx. 280 mm - Maximum Turning Length: Approx. 540 mm - X-Axis Travel: Approx. 185 mm - Z-Axis Travel: Approx. 540 mm - Spindle Bore: Approx. 66 mm - Bar Capacity: Approx. 51 mm - Spindle Nose: A2-6 - Spindle Speed: Up to 4,500 rpm - Spindle Speed Range 1: Approx. 15–1,500 rpm - Spindle Speed Range 2: Approx. 45–4,500 rpm - Spindle Motor Power: 15 HP / approx. 11.2 kW - Turret Capacity: 12 tools - Tailstock: Included / To be confirmed - Tailstock Quill Diameter: Approx. 80 mm - Tailstock Quill Travel: Approx. 130 mm - Chip Conveyor: Included

Condition: used, Year of construction: 2007, A vertical CNC machining center in need of repair is offered for sale. Main motor: 15kW (S1), max. current: 36A, phases: 3, control: Heidenhain. Weight: approx. 7000kg. The main spindle has bearing damage, and the control requires overhaul. An inspection is possible by prior arrangement. Lsdsz Da Rxepfx Albsah

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 335 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, table width: 420 mm, table length: 1,200 mm, spindle mount: MK 4, total height: 2,310 mm, total width: 1,900 mm, total length: 2,650 mm, type of input current: three-phase, rotational speed (max.): 4,000 rpm, rotational speed (min.): 40 rpm, workpiece weight (max.): 405 kg, quill travel distance: 150 mm, power: 6 kW (8.16 HP), Equipment: rotational speed infinitely variable, Type control: Heidenhein 150 System resolution: 0,001 mm Lajdpfx Ajunhy Sslbjh Documentation for machine

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 290 mm, turning length: 330 mm, turning diameter: 229 mm, spindle bore: 47 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 138 mm, controller model: Fanuc GE 18i-T, Hardinge Conquest T42 CNC turning center (2000) Controller: GE Fanuc Series 18-T, live tooling, C-axis option noted, tailstock included, 12-station turret, Spindle bore 47.6 mm, spindle speed 5,000 rpm, Max turning/machining diameter 229 mm, Max turning length 333 mm, X travel 138 mm, Z travel 350 mm. Laodpfx Aloyzbivsbeh

Condition: good (used), functionality: fully functional, Bridgeport VMC 600 22 CNC machining center with Heidenhain TNC 410 / 426 control system -Travel X-axis: 600mm -Travel Y-axis: 410mm -Travel Z-axis: 520mm -Table load capacity: 500 kg -Spindle taper: SK 40 ISO/BT -Spindle power: 8.5 kW -Speed range: 40 to 6000 RPM -Tool changer: 22 positions -Number of controlled axes: 3 -Year of manufacture: 2000 -Length: 2800 mm -Width: 2050 mm Lodpfx Alezhg Riobjah -Height: 2300 mm -Weight: Approx. 2500 kg

Condition: used, 10’-0” x 84” HARDINGE CONICAL BALL MILLS MILL SPECIFICATION Model : 10’-0” x 84” HCBM Overall Dimensions : 3050 mm diameter x 5185 mm long. Installed Power : 400 kW Absorbed Power : 320 kW Mill Speed : 20 rpm Lining : Chrome Iron Cast Liner Plates Media : Steel Balls (30 tonne required) Drive : Girth Gear and Pinion, Gearbox and Slip Ring Motor Trunnion Bearings : No.1 Mill - Cooper Split Roller Bearings No.2 Mill – White Metal Bearings The mills were operated by British Chrome & Chemicals Ltd (later Elementis Chromium), at their site in Cleveland, UK, processing Chrome Ore to a fineness of 99% passing 45 µm. The first mill, with the white metal bearings, was installed in around 1970. The second mill, with the Cooper Split Roller Bearings was installed in 1980. This mill is offered with a new set of Cooper Trunnion Bearings. Both mills were in operation until the site closed in 2009 and have been in storage ever since. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list. Ledpezvgdlsfx Albjah

Condition: like new (used), Year of construction: 2008, operating hours: 24,000 h, travel distance X-axis: 800 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 540 mm, controller manufacturer: FANUC, controller model: Series 18i-MB, workpiece weight (max.): 700 kg, table width: 540 mm, table length: 940 mm, spindle speed (min.): 8,000 rpm, mount diameter: 30 mm, tool diameter: 76 mm, tool weight: 8 g, CNC controller: FANUC Series 18i-MB Axes X-axis travel mm: 800 Y-axis travel mm: 540 Z-axis travel mm: 540 Distance spindle nose - table surface mm: 45 - 685 Worktable Table dimensions mm: 925 x 540 Max. workpiece weight kg: 700 T-Slot version: 18 Spindle Spindle speed rpm: 8.000 Ledpfow Aaycsx Albeah Tool system Tool magazine slots: 30 Max. Tool Diameter: 76 Max tool weight kg: 8 Equipment Chip conveyor Machine running times Under power: 24.000 Basic machine dimensions / weight Length mm: 2.955 Width mm: 2.137 Height mm: 2.713 Weight kg: 6.500

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 600 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 540 mm, controller manufacturer: SIEMENS, controller model: Sinumerik, table width: 540 mm, table length: 750 mm, spindle speed (max.): 8,000 rpm, spindle motor power: 15,000 W, This Bridgeport GX 600 Vertical Machining Center was built in 2007 in the United Kingdom. Equipped with a SIEMENS SINUMERIK Control unit, this machine can operate with a spindle speed up to 8000 rpm. Ledsz D T Scjpfx Albsah Machine Benefits Technical Machine Benefits • Spindle nose to table top: 145-685 mm

Condition: excellent (used), travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, controller manufacturer: Heidenhain TNC 426 PB, workpiece weight (max.): 750 kg, total height: 2,750 mm, total length: 4,000 mm, total width: 2,250 mm, table width: 490 mm, table length: 1,000 mm, table load: 750 kg, rotational speed (max.): 12,000 rpm, overall weight: 4,200 kg, spindle motor power: 13,000 W, number of slots in tool magazine: 30, Equipment: chip conveyor, 3-axis CNC machine (VMC) BRIDGEPORT - VMC 800 XP MACH-ID 9835 Make: BRIDGEPORT Ledpfxez Nw Igs Albeah Type: VMC 800 XP Control: Heidenhain TNC 426 PB X - Travel: 800mm Y - Travel: 510mm Z - Travel: 600mm Table Length: 1000mm Table Width: 490mm Table load: 750 Feed rate X-Axis: 20000mm/min. Feed rate Y-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Spindle Taper: Sk40ISO/Bt/Mk Power on spindle: 13kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:15 Number of controlled axis: 3 Chip conveyor: yes Coolantsystem: yes Length: 4000mm Width: 2250mm Height: 2750mm Weight: 4200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: not inspected (used), Year of construction: 2003, turning length: 380 mm, turning diameter: 284 mm, spindle speed (max.): 5,000 rpm, overall weight: 2,300 kg, siemens maximum spindle speed: 5,000 RPM VDI turret, 12 stations tooling chip conveyor Laedpox Rbwxefx Albeh

Condition: used, Year of construction: 2014, Hardinge GS200 CNC Lathe 2010 Hardinge GS200 CNC slant bed lathe equipped with Fanuc Series Oi-TD control. ----- Control Fanuc Series Oi-TD CNC Control ----- Capacity Chuck Size: 3 Jaw Bar Capacity: 52mm Maximum Swing: 457mm Maximum Cutting Diameter: 284mm Maximum Cutting Length: 406mm Distance Between Centres: Not specified ----- Main Spindle Maximum Spindle Speed: 5,000 RPM ----- Turret Lsdpfx Aeylchtjlbjah Number of Stations: 12 ----- Axis Travels X Axis Travel: 218mm Z Axis Travel: 406mm ----- Accessories Hydrafeed Multifeed 65 Barfeed Swarf Conveyor Control: Fanuc Spec: Spindle bore 52 mm | Max Swing 457 mm | Travel X 218 Z 406 mm Accessories: Tailstock, parts catcher & 8" Power Chuck, Swarf conveyor, Collet chuck

Condition: excellent (used), Year of construction: 2007, Hardinge Talent 6/45 2 Axis CNC Turning Centre (2007) Siemens 810D Control (CCU3) Spindle Motor 11kW VDI30 Turret Spindle Speeds to 6000rpm Max. Turning Lenth 381mm Max. Turning Dia. 284mm Max. Swing over Bed 457mm X Axis Travel 228mm Z Axis Travel 406mm 2800kgs *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79161 Machine Serial Number: BLAA7E0070 Cost: £13,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Lajdpfeyvqdfsx Albsh Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2006, Technical details: turning diameter over bed: 284 mm turning dia. over face-slide: 380 mm turning length: 381 mm x-axis: 153 mm longitudinal traverse (z-axis): 406 mm control: Siemens 810D revolution per minute: 5000 U/min Lsdpfx Alezrlvlobjah spindle bore: 52 mm tool turret - number of stations: 12 Stationen / Stations operating hours - idle run: 78000 h electrics - voltage/frequency: 400/50 V/Hz total power requirement: 11 kVA Weight approx.: 2,8 t dimension machine approx.LxWxH: 3,0 x 1,6 x 1,8 m The machine is equipped with a C-axis, enabling the use of driven tools. *

Condition: used, HARDINGE Conical Ball Mill 6’-0” dia x 36” ball mill for the dry grinding of industrial minerals. Mill fitted with Manganese steel liners for operation will steel ball grinding media. White Metal Bearings on trunnions. 90 kW Motor fitted (could be reduced to 75 kW). Mill with countershaft drive but could be converted to gearbox. Ledpezvgvnsfx Albeah

Year of construction: 2017, condition: ready for operation (used), X-axis: 607mm, z-axis: 286mm, spindle speed: max. 6000/min, control: Fanuc 32i A, length: 4600mm, width: 1600mm, height: 2700mm, weight: 2.1t, operating hours: 34,536h. With automation FMB Unirobot LR MATE 200iD7L-P2TB, grinding spindle Jäger HF-Spindle, chuck MicroCentric 4-410-3-QC, MARPOSS measuring system with automated dimensional compensation, oil mist filter S400, belt filter Knoll KF110/500, hinged belt conveyor 320 S1 and other accessories. On-site inspection is possible. Lajdpfx Aev Uz Akjlbeh

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC 410, rotational speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 500 mm Spindle speed range: 0–10,000 rpm Spindle speed control: stepless Tool holder: SK 40 Magazine capacity: 20 MACHINE DETAILS Control system: Heidenhain TNC 410 Workpiece clamping area: 1,000 × 500 mm EQUIPMENT Lajdpfoz Hxclox Albjh Fixed angular table Vertical tool changer Full enclosure with sliding doors and interior lighting Various SK 40 tool holders Electronic handwheel Coolant system with high-performance pump Coolant pressure: 20 bar Chip conveyor Operating manual

Condition: used, A CNC machining center is offered. Control: Heidenhain TNC 426, spindle motor power: 13kW, full-load current: 30A, internal coolant supply: 10bar, spindle hours: 21704h, machine power-on hours: 51118h, control power-on hours: 25924h, program run time: 20017h. Equipped with internal coolant supply 10bar, 4th and 5th axes and machine vises. Weight: approx. 4300kg. An on-site inspection is possible. Lodpfx Alsz Dkilsbeah

Year of construction: 2013, condition: ready for operation (used), X-axis: 607mm, z-axis: 286mm, spindle speed: max. 6000/min, control: Fanuc 32i A, length: 1850mm, width: 1750mm, height: 1750mm, weight: 2.1t, operating hours: 59,861h. With automation FMB Unirobot MH5LS-SP, grinding spindle Jäger HF-Spindle, chuck MicroCentric 4-410-3-QC, MARPOSS measuring system with automated dimensional compensation, oil mist filter S400, Liqui gravity filter UR1020 with clean tank and other accessories. On-site inspection is possible. Laedpfx Aljv Uz Adsboh

Condition: good (used), Year of construction: 2007, operating hours: 30,000 h, CNC Lathe Hardinge Quest 6/42 SP Technical Data and Scope of Supply TECHNICAL DATA Manufacturer: Hardinge Model: Quest 6/42 SP Year of manufacture: 2007 Control: GE Fanuc 18i-TB Supply voltage: 400 V Phases: 3 Frequency: 50 Hz Machine current: 78 A Spindle drive: 44 A Control voltage: 115/24 V Operating hours: approx. 30,000 h Spindle mount: A2-5 Bar capacity: 42 mm Chuck size: 150 mm Max. workpiece length with collet: 381 mm Max. workpiece length with chuck: 270 mm Max. turning diameter: 309 mm X-axis travel: 89 mm Lodpfx Aloxflprobsah Z-axis travel: 406 mm Rapid traverse X-axis: 28 m/min Rapid traverse Z-axis: 38 m/min Turret: 12 station VDI 30 Indexing time: 0.1 s Machine length: 2,576 mm Depth: 2,025 mm Height: 1,905 mm Weight: approx. 5 t SCOPE OF OFFER Includes (not exhaustive): - CNC lathe Hardinge Quest 6/42 SP - Toolholder set - Chip conveyor - Transformer - Chip tray - Renishaw probe For the exact scope of supply, please refer to the photo documentation. The CNC Lathe Hardinge Quest 6/42 SP with Fanuc 16i/18i/21i control system from 2007 is a high-precision machine designed for a wide range of turning operations. It features a robust A2-5 spindle mount, a 42 mm bar capacity, and a 150 mm chuck, allowing flexible machining of different workpiece sizes. With a maximum turning diameter of 309 mm, even larger components can be machined reliably. The axes provide generous travel ranges of 89 mm (X) and 406 mm (Z), as well as high rapid traverse speeds, ensuring maximum productivity. The 12-station VDI 30 turret with an extremely short indexing time of 0.1 seconds guarantees fast tool changes and minimizes downtime. Thanks to the solid construction and the proven Fanuc control, the Hardinge Quest 6/42 SP is ideally suited for series production with the highest accuracy demands. No guarantee is given for the correctness, completeness or currentness of the information provided.

Condition: excellent (used), Year of construction: 2008, 3-axis CNC Lathe HARDINGE GS 250M CNC Fanuc Oi-TC Spindle hours: 6000h Specifications: Max swing over bed: 595 mm Max turning diameter: 356 mm Turning length: 558.8 mm X-axis travel: 271 mm Z-axis travel: 600 mm Bar capacity: 78 mm Spindle bore: 89 mm Spindle speed: 3500 rpm Spindle power: 18.5 kW Spindle nose: A2-8’’ Options: 1 turret with 12 driven positions in VDI 40 C-axis with 360,000 positions 2 driven tools Ljdoykbarepfx Albjah Fully programmable tailstock Automatic tool measurement probe Parts catcher 2 fixed tool holders 2 driven tool holders 1 3-jaw chuck 254 mm Tonfou

Year of construction: 2021, condition: ready for operation (used), X-axis: 607mm, z-axis: 286mm, spindle speed: max. 6000/min, control: Fanuc 32i A, length: 1850mm, width: 1750mm, height: 1750mm, weight: 2.1t, operating hours: 14,841h. With FMB Unirobot GP7-5Pkhs automation system, Jäger HF spindle grinding spindle, MicroCentric 4-410-3-QC chuck, MARPOSS measuring system with automated dimensional compensation, S400 oil mist filter, Knoll KF110/500 belt filter, 320 S1 hinged belt conveyor and other accessories. On-site inspection is possible. Laedsv Uz Aqepfx Albsh

Condition: good (used), Year of construction: 2008, Traverses X Y Z: 1020 x 540 x 540mm, Table 1120 x 540mm, siemens 810 Control, 24 Station ATC, Ledpezg Enkefx Albeah Spindle power 15Kw, 10,000rpm, BT40 Spindle, Coolant,