Used Cazeneneuve Center Lathe for sale (16,771)

Condition: good (used), Year of construction: 1991, functionality: fully functional, Weiler Praktikant 160 B, Year of manufacture: 1991, 3-axis digital display, Maximum turning diameter: 160 mm, Distance between centers: 650 mm, Spindle speed up to 2,500 rpm, Tailstock, Collet set, Chuck, 2 tool holders. Pjdpfx Aszg Hvveahopu

Condition: used, Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B Lead and Draw Spindle Lathe, built in 1992, with a new 3-axis digital display from K&C, from a vocational training workshop! Technical data: >> Year of manufacture 1992, Machine No. 92-160-2994 >> Center height 160 mm >> Distance between centers 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Tailstock, MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake, switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeros, switching of the counting direction >> 3-jaw chuck 160 mm with 1 set of jaws >> Tool clamping system with 2 steel holders >> Bed stop >> Centering point >> Coolant system >> Rear panel >> Machine feet >> Electronic spindle protection >> Operating manual Additional accessories such as collets, 4-jaw chucks, steady rests, and more are available at an extra charge. Ppsdpfszd Tycex Aahju For safety: Electronic spindle protection, cover for the lead and draw spindle, 2 emergency stop buttons, spindle brake, electronic door protection for the change gears. About the machine: Offered is a Weiler Praktikant 160 B lead and draw spindle lathe in very good condition. All slides run smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that are as smooth as if they had been ground. Take advantage of the opportunity to inspect this machine on-site while it is powered up and see its condition for yourself.

Condition: good (used), turning diameter over cross slide: 350 mm, spindle bore: 50 mm, turning diameter: 600 mm, center height: 1,000 mm, Behringer lathe with a wide range of accessories. Pedpfx Aozg Aywsahjpu

Condition: good (used), turning diameter over bed 380 mm Psdpozd Hf Sjfx Aahepu turning diameter over slide rest 250 mm turning length 600 mm turning speeds 90 - 1600 U/min centre height 200 mm total power requirement 4,2 kW weight of the machine ca. 1,3 t dimensions of the machine ca. 2,2 x 0,9 x 1,6 m

Condition: used, Lathe, taken directly from the workshop. In good working order. Price is negotiable. Comes with several accessories. Psdpfx Aaozgak Tohepu

Condition: used, Year of construction: 2011, Technical details: turning diameter over bed: 1090 mm turning diameter over support: 690 mm turning length: 1100 mm centre distance: 6000 mm turning dia. in gap: 1250 mm centre height: 500 mm spindle passage: 152 mm range of revolution per miute: 6,3 - 1250 U/min face slide travel: 525 mm tailstock quill taper MT: MK 6 Psdszdkz Depfx Aahepu tailstock quill adjustment:: 260 mm cross feed: 0,016 - 19,45 mm/U longitudinal feeds:: 0,032 - 38,9 mm/U number of feeds: 160 spindle bore: 155 mm total power requirement: 30 kW weight of the machine ca.: 10,65 t dimension machine xH: 8,3 x 2,0 x 1,90 m

Condition: used, Year of manufacture: 1980s/90s Technical data: Centre height: 185 mm Centre distance: 750 mm Turning diameter over bed: 370 mm Spindle bore: 36 mm Bed width: 250 mm Speed range: 38 - 1600 rpm Tailstock taper: MT 3 Quill stroke: 110 mm Dimensions (W x D x H), approx.: 1950 x 900 x 1200 mm Weight, approx.: 800 kg Pedpsydk Hhsfx Aahepu Equipment: - 3-jaw chuck, make: Röhm, ø 200 mm - Quick-change tool post with 4 holders - Bed stop - Chip tray

Condition: excellent (used), Swing over bed 400 mm Distance between centers 650 mm Pedpfx Ajq Dll Djahopu Spindle speeds 0-2500 rpm Misc. accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 1997, machine/vehicle number: 5284, Offer 26156 Technical data: - Maximum turning diameter 120 mm - Distance between centers 450 mm - Maximum turning diameter over carriage 250 mm Pedezf Ag Ujpfx Aahepu - Spindle bore 23 mm - Spindle nose with threads according to DIN 55027 - Taper of tailstock spindle MK 2 - 20 spindle speeds 60 - 3000 rpm - Feed rates – longitudinal 0.03 - 3.0 mm - radial 0.015 - 0.150 mm - Thread pitches 0.25 - 5 mm - Drive 400 V / 1.1 / 1.5 kW - Footprint approx. W 1200 x H 1250 x D 650 mm - Weight approx. 700 kg - Includes: - 3-jaw chuck - Quick-change tool holder Multifix with 3 inserts - Live center - Collet set

Condition: used, Year of construction: 1972, Dreh-Øüber Bett 400 mm Dreh-Øüber Support 220 mm turning length 1000 mm spindle turning speed range 12,5 - 2000 U/min spindle taper Bajonett 55022 spindle bore 47 mm feeds - longitudinal 0,07 - 4,16 mm/U feeds - cross 0.035 - 2,08 mm/U thread - mm pitch mm thread - inch 2 - 24 Gang/ inch. rapid travel - longitudinal/face 3,4 / 1,7 m/min spindle drive 11 kW power capacity 13 kW Ppsdpfx Aasvzhhyshsu weight of the machine ca. 2,8 t dimensions of the machine ca. 2,8 x 1,2 x 1,5 m • 3-jaw chuck Ø 250 mm, • 4-jaw chuck Ø 200 mm, • 2-axis- digital display, ANILAM WIZARD LATHE - retrofitted in 1992

Condition: excellent (used), Year of construction: 2000, Dreh-Øüber Bett 320 mm Dreh-Øüber Support 185 mm turning length 1000 mm Spindelbohrungs -Ø/ Aufnahme 32 mm mm spindle turning speed range (12) 85 - 2000 U/min feeds - longitudinal 0,006 - 1,77 mm/min Pjdpstv Iibsfx Aahepu feeds - cross 0,003 - 0,888 mm/min thread - mm pitch 0,1 - 28 mm thread - module 0,1 - 1,75 mm thread - inch 2,5 - 75 inch. voltage 400 V / 50 Hz power capacity 2,2 kW weight of the machine ca. 0.8 t dimensions of the machine ca. 1,8 x 0,8 x 1,4 m Quick-change toolholder with 5 cassettes, fixed steady, 3-jaw chuck Ø 200 mm, coolant device,

Condition: good (used), Year of construction: 1988, 1 used lead and feed screw lathe Make: Weiler Model: 160 B Year of manufacture: 1988 Technical specifications Centre distance: 650 mm Swing over bed: 320 mm Swing over cross slide: 192 mm Centre height: 160 mm Spindle bore: 40 mm Rated power: 2.4 / 3 kW Spindle speeds: 48 – 2500 rpm Dimensions: approx. L 2.20 x W 1.10 x H 1.40 m Weight: approx. 1 t Ppjdpfx Aasw Sdr Hehsu Equipment Heidenhain digital readout Multifix toolholder with various inserts 3-jaw chuck Emergency stop

Condition: used, WEILER Commodor incl. 3-axis digital readout Heidenhain - 3-axis digital readout / Heidenhain - Center height: 180 mm - Swing diameter over bed: 330 mm - Distance between centers: 1000 mm - Spindle bore: 56 mm - Spindle speeds: 25–2000 rpm - Automatic longitudinal / cross feeds - Thread cutting / metric / imperial / module etc. - Multifix toolpost with inserts - Chuck guard - 2x emergency stop - Three-jaw chuck - Chip guarding rear wall - Very well-maintained condition - Machine feet - Documentation Dimensions: LxWxH 2.3x1.2x1.6 m / Weight 1600 kg Ppsdpfx Aasy Dcppjhou Errors and omissions excepted.

Condition: used, centre distance 2.000 mm turning diameter over bed 350 mm swing over plan sled 470 mm bed width 525 mm turning speeds 25 - 1.250 U/min power capacity 18 kW spindle bore 92 mm spindle head ISO 702-3 Gr. 15 diameter of quill 145 mm Inner cone of the quill MK 6 longitudinal feed 0,035 - mm/-1 face feed 0,009 - 8,0 mm/-1 Ppjdozczhmjpfx Aahou metrical thread cutting 0,5 - 304 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. The guideways are in very good condition. Technical features & accessories: - various accessories Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale!

Condition: new, neu Bulgarien 58370 € 1103.19 € 600 mm 2000 mm 0 mm 80 mm 400 mm 400 mm 8 90 MK 3 20 - 100; 80 - 400; 400 - U/Min 120 64 0.5 - 120 mm 60 - 1/4 Gänge/" Ppodpfx Ajyq Stpeahou 315 mm 1 mm 90 mm 5 MK 2 mm 11 kW 3600 mm 1500 mm 1650 mm 3110 kg In contrast to the universal lathes, here the adjustment of the revolutions is infinitely variable by means of a frequency inverter. It is possible to ensure a "constant cutting speed" (V-const), i.e. when changing the diameter to be machined, the speed remains unchanged and thus a higher accuracy and smoothness of the surface is achieved. At the customer's request, the machines can be manufactured with a reading of the linear displacement and positioning by mounting a digital display. driven by variable speed control (3 steps) 3-axes digital readout Fagor with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center main motor with frequency invertor four way rapid traverse device longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 54970,00 turning length1.500 mm € 56350,00 turning length3.000 mm € 62720,00 turning length4.000 mm € 685,00 turning length5.000 mm € 83910,00

Condition: new, neu Bulgarien 42910 € 819.58 € 400 mm 750 mm 200 mm 52 mm 235 mm 320 mm 6 6 MK 4 18-98; 48-265; 144-790; 3 U/Min 80 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 0.25 - 7.5 mm Ppsdoyq Stispfx Aahju 120 - 4 Gänge/" 0.0625 - 1.875 235 mm 110 mm 50 mm 4 MK 100 mm 7.5 kW 1530 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 43.630,-

Condition: new, neu Bulgarien 140320 € 2652.05 € 1320 mm 3000 mm 625 mm 155 mm 940 mm 700 mm 15 160 MK 4 3,7 - 15,6; 14,7 - 62; 58 U/Min 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 1/16 - 60 Gänge/" 685 mm 270 mm 125 mm 6 MK 260 mm 30 kW 8550 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment Ppedpfx Aoyq Stcsaheu full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 125460,00 turning length4.000 mm € 148950,00 turning lenght 5.000 mm € 160150,00 turning length6.000 mm € 177240,00

Condition: new, neu Bulgarien 133550 € 2524.1 € 1090 mm 3000 mm 500 mm 155 mm 690 mm 700 mm 15 160 MK 4 3,7 - 15,6; 14,7 - 62; 58 U/Min 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 60 - 1/16 Gänge/" 240 525 mm 270 mm 125 mm 6 MK 260 mm 30 kW 8050 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard Podpfx Aasyq Sr Sjhepu leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 118510,00 turning length4.000 mm € 142090,00 turning length5.000 mm € 153400,00 turning length6.000 mm € 170390,00

Condition: new, neu Bulgarien 126650 € 2393.69 € 890 mm 3000 mm 400 mm Ppjdpfeyq Sq Usx Aaheu 155 mm 490 mm 700 mm 15 160 MK 4 3,7 - 15,6; 14,7 - 62; 58 U/Min 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 60 - 1/16 Gänge/" 525 mm 270 mm 125 mm 6 MK 260 mm 30 kW 7500 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 111610,00 turning length2.000 mm € 115430,00 turning length4.000 mm € 135290,00 turning length5.000 mm € 146500,00 turning length6.000 mm € 163590,00

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 53250 € 1006.43 € 500 mm 1500 mm 250 mm 75 mm 0 mm 400 mm 8 80 MK 3 25-100; 100-400; 500-2000 U/Min 120 0.04 - 12 mm/U 0.02 - 6 mm/U 0.5 - 120 mm 60-1/4 Gänge/" 240-1 315 mm 1 mm 90 mm 5 MK 2 mm 11 kW 3100 mm 1250 mm 1400 mm 2800 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) Ppedpfx Aeyq Srfjahju 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 51870,00 turning length2.000 mm € 55170,00 turning length3.000 mm € 59620,00 turning length4.000 mm € 656,00 turning length5.000 mm € 81110,00

Condition: new, neu Bulgarien 89440 € 1690.42 € 760 mm 3000 mm 380 mm 132 mm 520 mm 560 mm 11 140 MK 3 7 - 42; 28 - 170; 165 - 1 U/Min 150 0.039 - mm/U 0.02 - 9 mm/U Pedpfxoyq Sn Ts Aahspu 0.5 - 0 mm 60 - 1/6 Gänge/" 410 mm 150 mm 105 mm 6 MK 225 mm 15 kW 4470 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.500 mm € 75340,00 turning length2.000 mm € 78380,00 turning length4.000 mm € 95860,00 turning length5.000 mm € 108730,00 turning length6.000 mm € 122800,00

Condition: new, neu Bulgarien 64180 € 1213 € 6 mm 2000 mm 315 mm 103 mm 4 mm 400 mm 11 120 MK 3 16 - 63; 63 - 250; 315 - U/Min 120 0.04 - 12 mm/U 0.02 - 6 mm/U 0.5 - 120 mm Gänge/" 315 mm 1 mm 90 mm 5 MK 2 mm 11 kW 3310 kg driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 60780,00 Psdpfx Aajyq Sm Nehjpu turning length1.500 mm € 62160,00 turning length3.000 mm € 686,00 turning length4.000 mm € 74540,00 turning length5.000 mm € 90020,00

Condition: new, neu Bulgarien 26210 € 500.61 € 325 mm 750 mm 165 mm 32 mm 190 mm 200 mm 5 4,5 MK 2 85-405; 470-2200 U/Min 48 0.006 - 1.77 mm/U 0.003 - 0.885 mm/U 0.1 - 28 mm 0.1 - 1.75 70 - 4 150 mm 95 mm 40 mm 3 MK 100 mm 2.2 kW 2150 mm 950 mm 1350 mm 770 kg driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 160 mm spindle dead center coolant equipment full length rear splash guard Podpeyq Sngjfx Aahopu leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 26.730,-

Condition: new, neu Bulgarien 96240 € .94 € 860 mm 3000 mm 430 mm 135 mm 620 mm 560 mm 11 140 MK 7 - 42; 28 - 170; 165 - 1 U/Min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 240 435 mm 150 mm 105 mm 6 MK 225 mm 15 kW 4650 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp Podpfx Aajyq Sm Aehepu operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 82140,00 turning length2.000 mm € 85080,00 turning length4.000 mm € 102660,00 turning length5.000 mm € 115430,00 turning length6.000 mm € 129500,00

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 37910 € 724.08 € 400 mm Podpfxjxzuu As Aahopu 1000 mm 200 mm 52 mm 235 mm 320 mm 6 6 MK 12 50-2.240 1/min 80 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 480 - 16 235 mm 110 mm 50 mm 4 MK 100 mm 4 kW 2750 mm 1100 mm 1600 mm 1540 kg driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultisuissewith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTH (PRICE ON REQUEST): turning length 750 mm