Tool holder

SK 50

Condition: new, Nord Getriebebau SK71LP / 4 TF motor SN: 32510096 + SK 1SMI50AF-IEC71-71LP / 4 gearbox SN: 203661211-100, unused, 100% functional, scope of delivery as per photos. Dujdpfxey Rcgnj Aiwot

Condition: ready for operation (used), Year of construction: 2009, operating hours: 9,192 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 16,000 rpm, number of axes: 3, This 3-axis HERMLE C 1200 vertical machining centre was manufactured in 2009. It features an impressive X-axis travel of 1200 mm, Y-axis travel of 900 mm, and Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and includes 30 tool stations. If you are looking to get high-quality machining capabilities, consider the HERMLE C 1200 machine we have for sale. Contact us for further details. • X – 1200 mm • Y – 900 mm • Z – 500 mm • Machining Center C 1200 V • Heidenhain iTNC 530 contouring control • Spindle 16,000 rpm • SK 40 • 30 Tool Stations • Rigid Clamping Table • Coolant System • Electronic thermal compensation (iTNC) with temperature sensors on the motor spindle and machine base • Portal design with a closed rear wall for significantly better support during torsional loads • Two axes are located in the tool, providing very good mass distribution and ideal conditions for high rapid traverse and feed rates • Feed screw diameter and pitch (X and Z axes): 40 / 20 mm • Feed screw diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system • Resolution: 0.0001 mm • Position tolerance (Tp) in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm • Recommended ambient temperature for maintaining accuracy: 20 °C ± 1 °C • Flushing/wash-down system for rinsing the side work area • Display: 15" TFT color flat screen • Flexible contour programming • Part program memory • Tool diameter capacity: 80 mm • Tool diameter with free adjacent slots: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Chip-to-chip tool change time according to VDI 2852: 6.5 seconds • Manual control unit includes electronic handwheel, axis direction keys, feed control, rapid traverse, emergency stop, and enable switch • Machine on – 11,927 h • Spindle on – 9,192 h Additional equipment • Chip conveyor • Heidenhain touch probe • Electronic Manual Control Module (iTNC) Duodpfxsylw Ste Aiwjt Technical Specification Taper Size SK 40

Condition: excellent (used), Tool holders Dodpsy Invvjfx Aiweut SK 50 DIN 280 Stock number (28638) 20 units as a package: 220 euros Transport and storage trolley: 150 euros Transport trolley dimensions: Width 800 mm Depth 600 mm Height 840 mm

Condition: used, diameter div. number 16x tool adaptor SK 50 Tool Package DS Duodpswtrztjfx Aiwet SK 50 Other quantities also possible! A total of approx. 600x SK 50 holder available

Condition: as good as new (ex-display), Year of construction: 2025, working width: 1,525 mm, sheet thickness (max.): 100 mm, overall weight: 6,400 kg, The 42 series provides the solution for manufacturers who deliver premium quality products. This top-level quality is achieved by a multi-rotating brush unit with 8 abrasive flap brushes, which perform uniform deburring and produce perfectly rounded metal edges. This is a multidirectional rotary brush machine (RB) for consistent deburring and finishing of flat metal parts. It enables all-round processing in a single pass, giving the workpiece a non-directional surface finish. Equipped with one or more abrasive belt units (W) for pre-deburring and fine grinding. Cup brush unit (TB) for deburring, edge breaking, non-directional finishing, or removal of scale. - Abrasive belt unit (self-calibrating) - Cup brush unit (self-calibrating) Dujdpfxsxw Ih Uo Aiwst - Rotary brush unit with 8 brushes (self-calibrating)

Condition: used, tool adaptor Sk 50 weight . kg material . Approx. 48 pieces Dujdpfx Aioyyc Abowet The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, tool adaptor Sk 50 weight . kg material . Approx. 48 pieces The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Djdpfsyycz Rex Aiwout We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2011, Travel X/Y/Z: 1000mm/500mm/635mm, tool holder: BT40, spindle speed: 10000rpm, tool positions: 40, control: Haas, spindle hours: approx. 4500h. 3-axis robot System 3R WorkPartner, year of manufacture: 2005, transfer weight: 80kg, stroke: 1500mm, pallet positions: 20. Including System 3R GPS 240 zero-point clamping system, tool measurement, tool breakage control, Renishaw 3D probe, and oil mist extraction. Documentation available. An on-site inspection is possible. Dedoxg Riajpfx Aiweut

Condition: used, tool adaptor Sk 50 weight . kg material . Approx. 48 pieces Duedpfjyycz Dex Aiwot The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), For sale: professional SK40 milling tool holders Ø8-50 according to DIN 69871 AD. • Taper SK40 • Weldon clamping Ø8 mm (side screw) • Length 50 mm • Central cooling AD • Very good condition – used, fully functional • Some holders are sold complete with milling cutters and drills. Dujdjxcgzqjpfx Aiwot

Condition: used, Year of construction: 1969, grinding height 60 mm grinding width 120 mm grinding wheel diameter 600 mm grinding length mm workpiece height 60 mm total power requirement 50 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 _____ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 14 – 145 mm/sec Grinding wheel speeds, each, infinitely variable 765 rpm (24 m/s) Grinding spindle drive, each 22 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Total weight, approx. 7,000 kg Djdpfst Hw N Hex Aiwout Accessories / Special Features: * Rotary workpiece feed system with infinitely variable speed adjustment prepared with workpiece carrier disk approx. dia. 800 mm with relevant workpiece shaped pockets and after the grinding the parts will be automatically sorted out and collected in a collector box. * IONIC – Size Control Unit Model Nr. 9 So with measuring probe for the ground workpieces and with signal for the hydraulic infeed of the grinding wheel when size is not in order. * Automatic Dressing Device for the grinding wheels, hydraulically operated and with the automatic return of the grinding wheels after dressing cycle to the previously adjusted position and to continue the working cycle. Dressing cycle can be presetted by a timer or a manual release. * Manually operated infeed device of the Spindle slide to optimal workpiece thickness. * Spindle drives controlled by Ampere-Meters. * Separate switch cabinet. * Separate hydraulic unit. * Various carrier disks, etc. * Safety covers. * Central lubrication. * Large Coolant device with paperbandfilter This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Piston rings, washers, hydraulic parts, and other punched parts.) Condition : Good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: excellent (used), Tool cabinet for storing tool holders Cabinet 1: Dimensions (LxWxH): 100x60x200 cm Space for 24 SK 50 tool holders (DIN 69871 or DIN 2080) The tool holders shown are included. Duedpovptwpofx Aiwet Price: €590

Condition: excellent (used), Tool setting device (24310) Dusdpfx Aohc I Uvsiwjt For SK 50

Condition: good (used), Year of construction: 2007, Parts shown by hand not come. Duedorpn Dvepfx Aiwjt Technical details shown on picture.

Condition: excellent (used), For sale: Professional tool holder SK40-12×50-K, compliant with DIN 69871 AD/B. Each holder is fitted with a mounted end mill (visible in the photos). Djdpfexcg H Hex Aiwsut Mounting type: SK40 Sleeve: Ø12 mm Grip length: 50 mm Standard: DIN 69871 AD/B Condition: used, fully functional, ready for operation Please note that several units are available, all in the same Ø12×50 size.