Water tank 100,000 liter tank storage tank

Year of construction

2000

Condition

Used

Location

Warstein

Water tank 100,000 liter tank storage tank

Show map

Machine data

Machine type:: Water tank 100,000 liter tank storage tank

Year of construction:: 2000

Condition:: used

Price & Location

Location:: Enkerbruch 2, 59581 Warstein, Deutschland

Call

Details about the offer

Listing ID:: A2990763

Update:: 23.05.2024

Description

Tank-& Umweltschutz Wozniack Specialist company according to the Water Resources Act

Dear Sir or Madam, we offer a 30,000 liter storage tank for the storage of water and wastewater as follows . This is a 30 cbm storage tank made of steel.
Material S235JRG2 steel .
Incl manufacturer certificate DIN and nameplate.

The tank is cleaned from the inside and bitumen insulated from the outside.
Suitable for underground as well as above ground storage.

Tank dimensions :
Length : approx. 15.750 mm Diameter : approx. 2.900 mm Weight : approx. 14.000 kg

Shape : cylindrical

Equipment : on request

For the use as a fire water tank an additional
suction line with A-fixed coupling according to DIN can be offered.

Of course, you can also co-design your tank system!

All our plants are extensively controlled and checked in our company by selected employees.

We also offer an inexpensive delivery on request.

The inspection of our plants is possible at any time.
Further tank plants for above ground as well as underground storage are available in all sizes and are for sale on our premises.

Could we convince you of our offer?

Cgedpfx Akjc Nkznocet
If you have any questions or requests, just give us a call, one of our experienced employees will be happy to advise you.

General:

All offers are valid ex location Warstein , free loaded.
Delivery can be offered at a reasonable price for an additional charge.
Delivery time = immediately

You will receive an invoice with VAT.

In addition, we buy existing tank systems and can, as an approved specialist company according to the Water Resources Act (WHG), professionally empty, clean, dismantle and transport them away.

With kind regards
from Warstein

Tank and environmental protection Wozniack
Enkerbruch 2
59581 Warstein

The listing was translated automatically. Translation errors are possible.

Seller

Last online: Today

Registered since: 2015

36 listings online

Call

Send inquiry

Telephone & Fax

+49 2902 ... show

Fax:

These listings may also fit your interest.

Auction

NC cylindrical grinding machine SUPERTEC G38P-100NC

Hungary

18,045 km

NC cylindrical grinding machine
SUPERTECG38P-100NC

€5,000

To the auction

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: GD12002, workpiece weight (max.): 150 kg, grinding length: 1,000 mm, grinding diameter: 360 mm, overall weight: 4,700 kg, TECHNICAL DETAILS Max. grinding diameter: 360 mm Max. grinding length: 1,000 mm Max. workpiece weight: 150 kg MACHINE DETAILS Main drive power: 5 kW Dimensions & Weight Dimensions (L x W x H): 3,030 x 2,250 x 2,030 mm Weight: 4,700 kg EQUIPMENT PLC controlled Tailstock Work spindle Grinding spindle with flange and grinding wheel Internal grinding device Wet grinding system Electronic handwheel Work lamp Cgjdpoy A Nl Usfx Akcjt Center point Chuck Manual

See details

Listing

Wheel Grinder - Double VEB GALVANOTECHNIK DS 200/2

Germany

18,260 km

Wheel Grinder - Double
VEB GALVANOTECHNIKDS 200/2

Call

Condition: used, Technical details: grinding wheel diameter: 200 mm voltage: 220 380 V / Hz revolution per minute: 3000 U/min total power requirement: 900 Watt weight: 22 kg dimensions L x W x H: 0,23 x 0,46 x 0,25 m Double sanding block; table-top unit with sanding supports left/right, horizontally adjustable 30mm max. sanding discs Ø 200mm max. grinding wheel thickness 32mm currently clamped sanding discs on the sanding block: left = Ø 190mm x 30mm type H50 and right = Ø 180mm x 32mm type M20 * Codpju Ngu Sjfx Akcegt

See details

Auction

Wien

18,157 km

Crawler crane
TonlitaYXC200

€25,000

To the auction

Condition: new, functionality: fully functional, power: 8 kW (10.88 HP), gearing type: automatic, empty load weight: 1,800 kg, maximum load weight: 2,000 kg, chain condition: 100 %, Year of construction: 2025, operating hours: 1 h, machine/vehicle number: 20251219, The crawler crane is new and unused! TECHNICAL DETAILS Maximum load capacity: 2,000 kg Lifting capacity: 2,000 kg/m MACHINE DETAILS Engine manufacturer: Honda Power: 8 kW Transmission type: Automatic Fuel type: Petrol Csdpfx Akoy Em Hzjcjgt Unladen weight: 1,800 kg Operating hours: 1 h Track condition: 100% EQUIPMENT Tow hitch Rubber tracks Compact design for maximum flexibility

See details

Auction

Wien

18,157 km

Forklift 3 tons NEW
MovetecLT30

€8,400

To the auction

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 5 h, load capacity: 3,000 kg, lifting height: 3,000 mm, mast type: duplex, construction height: 2,090 mm, fork length: 1,220 mm, The forklift is brand new and unused! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 3,000 mm Fork length: 1,220 mm Fork width: 120 mm Fork thickness: 45 mm MACHINE DETAILS Engine manufacturer: Xinchai Power: 44.8 kW (60.91 HP) Fuel type: Diesel Mast type: Duplex Operating hours: 5 Dimensions & weight Dimensions (L x W x H): 2,682 x 1,225 x 2,090 mm Unladen weight: 4,400 kg Cjdpfx Akjy Em Huscsgt EQUIPMENT Side shifter Trailer coupling Integrated lighting CE marking

See details

Listing

Hessisch Oldendorf

18,375 km

Debarking
Valon KoneVK 26

€45,000

Fixed price plus VAT

Call

Condition: reconditioned (used), functionality: fully functional, approx. 4.5 m long infeed and centering table Drive via chain from the feed motor Centers the logs in the middle of the rotor Cgsdpou Hmacefx Akcot Debarking machine VK 26 4 main cutters 4 pre-cutters 30 KW main motor 11 KW feed unit non-driven extraction table Machine workshop checked Machine cleaned and repainted

See details

Auction

Wire eroding machine Mitsubishi EDM MV 1200 S

Województwo lubelskie

17,629 km

Wire eroding machine
MitsubishiEDM MV 1200 S

€23,000

To the auction

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 07D1M931, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 220 mm, wire diameter (max.): 0.3 mm, wire diameter (min.): 0.1 mm, TECHNICAL DETAILS Travel X-axis: 400 mm Cjdpfxoy Emxqj Akcjgt Travel Y-axis: 300 mm Travel Z-axis: 220 mm Travel U/V-axis: 120 mm Cutting angle at 87 mm: ±30° Cutting angle at 200 mm: ±15° Wire diameter: 0.1-0.3 mm Max. workpiece dimensions: 810 mm x 700 mm x 200 mm MACHINE DETAILS Operating hours: 28,500 h Machine weight: 2,700 kg

See details

Auction

Gelderland

18,560 km

Generator
ETTETT-50P

€9,000

To the auction

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: DK32037U640362L, overall weight: 975 kg, fuel type: diesel, tank capacity: 120 l, rotational speed (max.): 1,500 rpm, New ETT-50P generator from year 2026! TECHNICAL DETAILS Speed (max.): 1,500 rpm Power factor: 0.8 MACHINE DETAILS Output current: 72 A Csdpfx Asy Emwyekcjgt Output voltage: 400 V Output frequency: 50 Hz Type of output current: three-phase Continuous power (apparent): 50 kVA Emergency current: 72 A Voltage: 400/230 V Phases: 3 Fuel type: Diesel Tank capacity: 120 l Dimensions & Weight Dimensions (L x W x H): 2,200 x 1,060 x 1,373 mm Total weight: 975 kg EQUIPMENT CE marking Suitable with ATS switching system for mains takeover

See details

Listing

Bischofszell

18,680 km

REST FOIL MILL
NR.11

Call

Auction

3D coordinate measuring machine Keyence VL-700/VL-770

Oberösterreich

18,316 km

3D coordinate measuring machine
KeyenceVL-700/VL-770

€13,000

To the auction

Condition: ready for operation (used), functionality: fully functional, repeat accuracy: 0.002 mm, table load: 50 kg, rotary table diameter: 500 mm, The offer consists of the following components: VL-770 Probe Head – High-resolution optical 3D scanner VL-700 Control Unit – Control and evaluation unit, including software interface VL-C35 Cover – Light protection hood VL-A3D Software Package – Measurement and evaluation software (German) OP-88145 Calibration Plate – Reference plate VL-H3G Module – Geometric dimensioning and tolerancing (GD&T) module VL-H3R Module – CAD conversion module VL-B1 Accessory – Calibration ball gauge OP-99031 Cable – AC power cable Cgodpfx Asy Eglqokcet TECHNICAL DETAILS Repeatability (σ): 2 µm Measurement accuracy: ±10 µm Measurement resolution: 9 million measurement points Measuring range Low magnification: Ø300 × H200 mm High magnification: Ø70 × H50 mm Work Table Rotary table: 500 mm Rotation mechanism: 360° XY movement of object stage: Ø200 mm Tilting mechanism: up to 45° Maximum load capacity: 50 kg MACHINE DETAILS Weight Weight of control unit: 3.7 kg Weight of object table: 26 kg Weight of cover: 5.5 kg Weight of measuring unit: 19.6 kg EQUIPMENT Original software and manuals Calibration plate Protective hood Monitor, PC, keyboard, and accessories

See details

Auction

Województwo małopolskie

17,813 km

Double miter saw
ElumatecDG 244

€15,200

To the auction

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, controller model: E555 Touchscreen, overall weight: 2,300 kg, cutting length (max.): 6,000 mm, saw blade diameter: 550 mm, rotational speed (max.): 2,800 rpm, TECHNICAL DETAILS Max. cutting length: 6000 mm Cgedsy Egahjpfx Akcet Saw blade diameter: 550 mm Saw blade speed: 2800 rpm MACHINE DETAILS Control: E555 touchscreen Compressed air supply: 7 bar Dimensions & Weight Dimensions (L x W x H): 7500 x 1500 x 2000 mm Weight: 2,300 kg

See details

Listing

Eddy Current Separator Steinert NES 200 220 E 5009

Soerendonk

18,619 km

Eddy Current Separator
SteinertNES 200 220 E 5009

Call

Auction

Wire eroding machine AGIE AGIECUT PROGRESS 3

Baden-Württemberg

18,688 km

Wire eroding machine
AGIEAGIECUT PROGRESS 3

€15,000

To the auction

Condition: reconditioned (used), Year of construction: 2006, operating hours: 3,422 h, functionality: fully functional, machine/vehicle number: 214, workpiece weight (max.): 400 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 430 mm, wire diameter (max.): 0.3 mm, No minimum price – guaranteed sale to the highest bidder! The machine was overhauled in 2025! The corresponding invoice is included. TECHNICAL DETAILS Maximum workpiece weight: 400 kg Travel X-axis: 500 mm Travel Y-axis: 350 mm Travel Z-axis: 430 mm Cjdpfoy Ed E Ijx Akcjgt Maximum wire diameter: 0.3 mm Table load: 400 kg Maximum workpiece height: 420 mm Positioning accuracy: 0.001 mm MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Input current: 17 A Voltage: 3 x 400 V Power: 12.1 kVA Rated current: 17.5 A Short-circuit current: 10 kA Total weight: 2,650 kg Operating hours: 17,800 h EDM hours: 3,422 h EQUIPMENT Wire alignment device

See details

Auction

Nordrhein-Westfalen

18,476 km

Shrinking equipment
KuperST/I -1200

€4,001

To the auction

Listing

Bautzen

18,153 km

Storage tank
Tank Lagertank Stahltank

Call

Condition: good (used), functionality: fully functional, Equipment: type plate available, 100,000 liter tank, used, double-walled, good condition, ready for immediate use, cleaned - certificate from specialist company available Length: 15.74 m Diameter: 2.90 m Height: 3.10 m - Transport height - Access ladder - Platform with railing - Firmly welded saddle feet - Ventilation - Limit value transmitter - Dipstick - leak detector Cgedpfxouzvyuo Akcjt Loading and transportation can be offered. Only serious and serious inquiries will be answered: Name, e-mail address and telephone number.

See details

Auction

Table boring mill TOS Varnsdorf WFQ 80CNC/50

Ústecký kraj

18,155 km

Table boring mill
TOS VarnsdorfWFQ 80CNC/50

€64,000

To the auction

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 950 mm, spindle diameter: 128 mm, controller model: HEIDENHAIN iTNC530, The machine was overhauled and modernized in 2005. Repairs were carried out in 2025. The following work was performed: - Cleaning of the machine - Overhaul and adjustment of machine geometry - Overhaul of machine functionality - Overhaul of electrical equipment - Overhaul of hydraulics and lubrication - Backlash compensation and drive optimization - Replacement of guideway wipers - Repair of the telescopic cover Cedpfsy Edl Ujx Akcsgt - Overhaul of the CHOV-K 10 bar tool cooling system - Overhaul of the AVN40 tool changer TECHNICAL DETAILS Main spindle diameter: 128.57 mm Tool holder: ISO 50 Spindle speed range: 5,000 rpm Travel X-axis: 1,600 mm Travel Y-axis: 920 mm Travel Z-axis: 950 mm Clamping surface of table: 850 x 850 mm (850 x 1,600 mm including additional supports) Table load capacity: 3,000 kg MACHINE DETAILS Control: HEIDENHAIN iTNC530 EQUIPMENT - Handwheel - SIEMENS motors and drives - CNC table - full B-axis control - CHOV-K 10 bar - through-spindle cooling – emulsion - ATC40 - automatic tool changer - Operator console protected against chips and coolant - Workpiece cover

See details

Advertise here