Storage platform

Year of construction

2016

Condition

New

Location

Solbiate Arno Italy

Show map

Machine data

Machine type:: Storage platform

Year of construction:: 2016

Condition:: new

Price & Location

Location:: Solbiate Arno, Italy

Call

Technical details

Total length:: 29,385 mm

Total height:: 3,180 mm

Total width:: 13,884 mm

Load capacity:: 400 kg

Clearance between the columns:: 5,000 mm

Working height:: 3,000 mm

Overall weight:: 20,000 kg

Space requirement height:: 3,500 mm

Space requirement length:: 30,000 mm

Load capacity per storage section:: 400 kg

Space requirement width:: 14,000 mm

Details about the offer

Listing ID:: A21765668

Update:: 29.04.2026

Description

Custom-designed industrial mezzanine in structural steelwork, complete with technical and structural documentation.
The structure is brand new, never installed, currently dismantled and stored, with all original components present.

Dimensional specifications:

• Floor area: approx. 330 m²
• Maximum overall dimensions: 29.4 m × 13.9 m
• Walking surface height: approx. 3.18 m
• Configuration: irregular geometry (custom structure, see technical drawings)

Load-bearing structure
• Structural steel frame construction
• Main beams: IPE profiles 360 / 400 / 450 / 500
• Secondary beams: IPE profiles 200 – 300
• Columns: structural tubular sections up to 200×200 mm
• High-strength bolted connections
• Base plates pre-drilled for anchoring

Decking
• Galvanized profiled composite sheet metal
• Prepared for concrete topping
• Design load capacity: uniformly distributed load approx. 400 kg/m²

Included accessories
Dedpfey Eivfsx Aiwskl
• Access staircase structure (steel stringers)
• Safety guardrail components
• Base plates, brackets, and connecting elements

Condition and supply
• Condition: NEW
• Never assembled
• Complete with all original parts
• Currently dismantled and in storage
• Ready for transport and reassembly

Technical documentation
• Full structural calculation report
• Detailed execution drawings and construction layouts
• Materials report
• Documentation signed by a licensed engineer

Technical notes
• Structure designed in compliance with current technical regulations
• Structure fully dismantled, delivered on lorry, transport at buyer’s expense
• Weight approx. 20 tons
• Available for inspection by appointment

The listing was translated automatically. Translation errors are possible.

Documents

21765668-01.pdf
21765668-02.pdf
21765668-03.pdf

Seller

Last online: A week ago

Registered since: 2025

10 listings online

Call

Send inquiry

Telephone & Fax

+39 0321 ... show

These listings may also fit your interest.

Auction

CNC turning and milling center Gildemeister CTX 510

Nordrhein-Westfalen

18,525 km

CNC turning and milling center
GildemeisterCTX 510

€14,000

To the auction

Condition: ready for operation (used), Year of construction: 2004, operating hours: 60,425 h, functionality: fully functional, turning length: 1,050 mm, turning diameter: 465 mm, travel distance X-axis: 300 mm, chuck outer diameter: 325 mm, controller model: Fanuk Series 21I-TB, TECHNICAL DETAILS Djdpey Hg S Hjfx Aiwskl Max. turning length: 1,050 mm Turning diameter over cross slide: 350 mm Max. turning diameter: 465 mm Chuck diameter: 325 mm X-axis travel: 300 mm Z-axis travel: 1,050 mm Max. spindle speed: 3,500 rpm Max. torque: 630 Nm Spindle bearing diameter: 120 mm Max. bar diameter: 90 mm Tailstock stroke: 850 mm Quill stroke: 150 mm Rapid traverse X/Z axis: 30 m/min Number of tool turret positions: 12 Tool holder: VDI 40 MACHINE DETAILS Control: Fanuk Series 21I-TB Drive power: 33 kW

See details

Auction

Vertical machining center POSMill C 800 Kompakt

Baden-Württemberg

18,641 km

Vertical machining center
POSMillC 800 Kompakt

€24,000

To the auction

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 550 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 10,000 rpm, The machine spindle was replaced in 2022! TECHNICAL DETAILS Traverse path X-axis: 800 mm Traverse path Y-axis: 520 mm Traverse path Z-axis: 550 mm Spindle type: SK40 Spindle speed: 10,000 rpm Tool changer: 24-position Dkjdpfsy E Hqtex Aiwel Table size: 950 x 520 mm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (LxWxH): approx. 2.60 x 2.60 x 2.70 m Weight: 6,800 kg Operating Hours Machine on-time: approx. 47,000 h Program run time: approx. 5,700 h Spindle: approx. 4,800 h EQUIPMENT IKZ (internal coolant supply) Hexagon probe Note: NC clamps and tool holders are not included in the offer.

See details

Auction

Hydraulic press for rubber and EVA foams MAPELLI T 1000

Greece

17,682 km

Hydraulic press for rubber and EVA foams
MAPELLIT 1000

€9,000

To the auction

Condition: ready for operation (used), Year of construction: 1983, operating hours: 50,000 h, functionality: fully functional, operating pressure: 200 bar, overall weight: 33,000 kg, pressing force: 1,000 t, stroke length: 650 mm, travel speed (max.): 3,600 mm/min, TECHNICAL DETAILS Pressing force: 1,000 t Clamping force of the core plates: 30 t Travel speed: approx. 60 mm/s Operating pressure: 200 bar Stroke of the movable plate: 650 mm Stroke of the mold holder plate (towards operator): 980 mm Heating Plates and Heating System Heating plate size: 1,000 mm x 1,000 mm Number of heating plates: 7 Number of openings: 6 Opening dimension per opening: approx. 108 mm Specific pressure on plates: 100 kg/cm² Hydraulics and Power Units Hydraulic pump power: 9 kW Oil dynamic pump power: 11 kW Installed electrical power: 21.5 kW Hydraulic oil capacity: approx. 160 l Operating Fluids Amount of hydraulic fluid emulsified with water and 5% CIL-SOLIOIL-BK oil: approx. 1,300 l Nitrogen bottles (each 60 l at 200 atm) for accumulator pre-charging: approx. 10 MACHINE DETAILS Weights Weight of the press: 33 t Weight of hydraulic power unit: 0.4 t Weight of pump and accumulator: 1.9 t Weight of electrical unit: 0.2 t Total delivery weight: 35.5 t FEATURES Dksdpfx Ajy Hhqdsiwel Heating system with saturated steam Electrohydraulic power control device Electrovalve air venting system

See details

Auction

CNC turning and milling center MORI SEIKI NT 4200/1000S

Schleswig-Holstein

18,208 km

CNC turning and milling center
MORI SEIKINT 4200/1000S

€30,000

To the auction

Condition: ready for operation (used), Year of construction: 2006, operating hours: 16,093 h, functionality: fully functional, turning length: 1,000 mm, spindle speed (max.): 5,000 rpm, controller model: MITSUBISHI M-720BM (MAPPS 2), counter spindle speed (max.): 5,000 rpm, milling spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Turning length: 1,000 mm Djdpfx Aoy Eydyjiwekl Main Spindle Max. spindle speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: 73 mm Counter Spindle Max. spindle speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: 73 mm Milling spindle speed: 0 - 12,000 rpm Tool holder: Capto C6 Tool stations: 100 positions Hollow clamping device: 67 mm MACHINE DETAILS Control unit: MITSUBISHI M-720BM (MAPPS 2) Operating Hours Operating hours: 26,875 h Spindle hours: 16,093 h EQUIPMENT Y-axis Fully indexable B-axis Chip conveyor, discharge right Standard coolant system Interface for high-pressure coolant system, 70 bar Tool spindle with through-spindle cooling Coolant spray gun Blow air through sub spindle Manual tool presetting on main spindle 3-color signal tower Double foot switch Simultaneous 5-axis machining Automatic power off Tool offset for 5-axis machining Programmable data input Dynamic interchange diameter/radius Stroke check prior to movement

See details

Auction

Multi-component injection moulding machines ENGEL VICTORY 1350H500V/220 Combi

Wien

18,157 km

Multi-component injection moulding machines
ENGELVICTORY 1350H500V/220 Combi

€12,000

To the auction

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, clamping force: 2,157 kN, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 220 t Screw diameter: 55 mm + 40 mm Maximum injection volume: 618 cm³ + 251 cm³ MACHINE DETAILS Mounting platen: 960 x 830 mm Dedoy Exdxjpfx Aiwokl Minimum mold installation height: 320 mm Maximum mold installation height: 730 mm EQUIPMENT EC100/A03 Note: When purchasing multiple items from the same location (see offers below), you will benefit from reduced costs for disassembly and loading.

See details

Auction

Multi-material injection molding machine KraussMaffei KM200-1000-390 CZ

Wien

18,157 km

Multi-material injection molding machine
KraussMaffeiKM200-1000-390 CZ

€6,900

To the auction

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, clamping force: 1,961 kN, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Dodpey Exdlofx Aiwskl Clamping force: 200 t Tie bar spacing: 560 x 560 mm Screw diameter (first component): 60 mm Screw diameter (second component): 35 mm Shot weight (first component): 566 g Shot weight (second component): 178 g EQUIPMENT Two-component system Kraussmaffei Multinject system Note: When purchasing multiple items from the same location (see listings below), the lower costs for dismantling and loading will be waived.

See details

Auction

Multi-material injection molding machine ENGEL ES 330H80V/125 HL .2F

Wien

18,157 km

Multi-material injection molding machine
ENGELES 330H80V/125 HL .2F

€6,500

To the auction

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, clamping force: 1,225 kN, controller model: CC100, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 125 t Horizontal cylinder: 35 Vertical cylinder: 18 MACHINE DETAILS Djdpfjy Exc Iex Aiwekl Control: CC100 EQUIPMENT 1x hydraulic core pull BAP 1x proportional hydraulic interface for index plate BAP 16x heating zones (HK) 2x magnetic clamping plates for BAP and FAP Note: When purchasing multiple items from the same location (see offers below), you will benefit from the lowest costs for dismantling and loading.

See details

Auction

Multi-material injection molding machine ENGEL ES 650W500V/200HL. 2F

Wien

18,157 km

Multi-material injection molding machine
ENGELES 650W500V/200HL. 2F

€7,900

To the auction

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, screw diameter: 45 mm, clamping force: 2,000 kN, No reserve price – guaranteed sale to the highest bidder!\n\nTECHNICAL DETAILS\n\nClamping unit: 2,000 kN\n\nScrew diameter unit 1: 45 mm\nScrew diameter unit 2: 45 mm\n\nMax. shot volume unit 1: 226 cm³\nMax. shot volume unit 2: 183 cm³\n\nMACHINE DETAILS\n\nMinimum mould installation size: 250 mm\nMaximum mould installation size: 750 mm\n\nEQUIPMENT\n2-component machine\nTie-bar-less design\n\nNote: When purchasing multiple items from the same location (see offers below), you will benefit from the most favourable disassembly and loading costs for each item. Djdpfx Aoy Exatoiwekl

See details

Auction

Injection molding machine ENGEL Victory 330/125 Tech

Wien

18,157 km

Injection molding machine
ENGELVictory 330/125 Tech

€9,300

To the auction

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, clamping force: 1,225 kN, screw diameter: 30 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Dkjdpfjy Exagsx Aiwsl Clamping force: 125 t Screw diameter: 30 mm Note: When purchasing multiple items from the same location (see offers below), you will only be charged the lowest applicable costs for dismantling and loading.

See details

Auction

Injection molding machine ENGEL ES 1800/300HL-V

Wien

18,157 km

Injection molding machine
ENGELES 1800/300HL-V

€14,000

To the auction

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, clamping force: 2,942 kN, screw diameter: 70 mm, displacement volume: 1,039 cm³, No minimum price – guaranteed sale to the highest bidder! Engel injection moulding machine including robot! TECHNICAL DETAILS Clamping force: 300 tons Screw diameter: 70 mm Max. shot volume: 1,039 cm³ Dkjdpfsy Ew U Asx Aiwol EQUIPMENT 3x core pulls Robot Note: When purchasing multiple items from the same location (see offers below), the respective lower costs for dismantling and loading will be waived.

See details

Advertise here