Textile silo including frame No 01

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0250A0472, laser power: 5,000 W, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, TECHNICAL DETAILS Travel range, X-axis: 4,000 mm Travel range, Y-axis: 2,000 mm Laser power: 5,000 W MACHINE DETAILS Mains voltage: 400 V / 50 Hz Connected load: 105 kVA Control voltage: 24 V DC Required fuse rating: 3 x 160 A Compressed air connection: 7 to 10 bar Nitrogen connection N₂: 30 bar Lajdpfx Afszkr T Uetsd Oxygen connection O₂: 20 bar

Condition: good (used), 3 x 65 m³ aluminum silo (granulate storage silos) with long frame (used) Contents approx. 65,000 liters Diameter (inside) approx. 3,000 mm Total height approx. 12,000 mm Bulk density: 0.6 kg/dm³ Cone inclination: 90 degrees Connections in the topsoil: 1 vent nozzle with hood DN 200 Lsdpfxevmidye Aftoad 1 flange nozzle DN 100 In the shell: 1 folding dome DN 450 1 filling pipe pulled downwards DN 80 Cone: The cone ends in a flange DN 150 with suction box otherwise as per sketch and photos

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: M704025, sheet thickness (max.): 100 mm, overall weight: 4,650 kg, passage width: 1,300 mm, TECHNICAL DETAILS Material thickness: 0.8 to 100 mm Passage width: max. 1,300 mm Workpiece dimensions: min. 180 x 100 mm Workpiece weight: max. 250 kg/m Feed rate: 0.2 to 6 m/min MACHINE DETAILS Laodpfszkr Rtex Aftjd Dimensions & Weight Dimensions: 2,200 x 2,900 x 2,200 mm Machine weight: approx. 4,650 kg EQUIPMENT Processing: on both sides, dry

Condition: ready for operation (used), Year of construction: 2021, operating hours: 850 h, functionality: fully functional, machine/vehicle number: 07/21/158, power: 55 kW (74.78 HP), fuel type: electric, hopper volume: 2,800 l, rotational speed (max.): 90 rpm, rotor diameter: 500 mm, The machine has been used very little and is therefore in good condition with new blades! TECHNICAL DETAILS Infeed and Hopper Infeed opening: 1,800 x 1,500 mm Hopper capacity: 2.8 m³ Rotor Rotor diameter: 354 - 500 mm Rotor speed: approx. 90 rpm Tools and Screening Tools V5 + V7: 45 / 90 / 135 / 180 pcs. Screen opening: 10 - 50 mm Extraction Extraction nozzle diameter: 250 mm Air velocity: 32 m/s MACHINE DETAILS Performance and Drive Power: 55 kW (74.78 hp) Fuel type: electric Power requirement, dual drive: 2 x 45 / 2 x 55 kW Weight: approx. 5,800 kg EQUIPMENT Lsdjzkg Sfspfx Aftoad Rotor shaft made of solid steel Hydraulic feed for constant material flow to the rotor Cardan-mounted hydraulic cylinders to prevent premature wear of the piston seals Screens with various screen openings for the required chip size, depending on the material and application Safety package with gearbox limit switch and reversing counter Changeable basket available New blades Note: Further technical information, such as the machine dimensions, can be found in the attached data sheet.

Condition: new, Year of construction: 2025, machine/vehicle number: 401064052, mobile concrete plant Frumecar EBA 1000 - Year: NEW - 4 aggregate hoppers of 25 m³ - Capacity: 50 m³/h - mixer size: 1.0 m³ / 1500 liters - K2 portable computer system - screw conveyor for cement - cement silo 55 tons - international assembly included - 2-year guarantee This offer is subject to change, and may contain input errors and mistakes. Only the specific agreements in the order confirmation or the sales contract are valid. more machines and mixing plants on our website Further information: Ledpjhd I S Aofx Aftsad Intended use: construction, usable material: concrete.

Condition: used, Year of construction: 2011, operating hours: 5,000 h, machine/vehicle number: M344Z16201031AHC, travel distance X-axis: 2,032 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, table load: 2,700 kg, spindle speed (max.): 12,000 rpm, The following repairs were carried out: Defective inverter identified and replaced Bearings in the Y-axis replaced; bearing set VTXZ Y-axis (5 pieces 35x72) Coolant system adjusted Orientation adjusted TECHNICAL DETAILS Travel range X-axis: 2,032 mm Travel range Y-axis: 660 mm Travel range Z-axis: 610 mm Spindle speed: 12,000 rpm Spindle cooling: Internal cooling Rapid traverse rate X/Y/Z: 35 m/min Power: 18 kW Tool holder: SK 40 Tool positions: 40 Tool diameter at full capacity: 75 mm Maximum tool weight: 10 kg Maximum tool length: 300 mm Table load: 2,700 kg Table clamping area: 2,285 x 660 mm T-slots in table according to DIN 650: 5 Slot width: 18 mm H8 Slot spacing: 125 mm Positional accuracy X, Y, Z: 0.02 mm Repeatability X, Y, Z: 0.01 mm MACHINE DETAILS Laodpfjzka Hiex Aftsd Footprint W x D x H, doors open / with control / chip conveyor: 6,950 x 5,150 x 3,700 mm Transport weight: 20,000 kg Machine weight: 18,000 kg Operating hours Machine hours: 11,417 hrs Spindle hours: approx. 5,000 hrs The following items are not included in the scope of delivery: vices, tools, extraction system, tool cart. Further technical data can be found in the attached documents.

Condition: used, Year of construction: 2004, operating hours: 28,082 h, travel distance X-axis: 800 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, controller model: Siemens 840 D, spindle speed (max.): 13,000 rpm, The control system (PCU 50) was replaced in March 2024! The machine spindle was replaced after approximately 5,500 operating hours! TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 620 mm Travel range Z-axis: 520 mm Ljdpfx Afszka Akjtjad Spindle speed: 13,000 rpm Number of tool slots in the tool magazine: 30 MACHINE DETAILS Control system: Siemens 840 D Operating hours Control system operating hours: 60,150 h Machine operating hours: 56,860 h Spindle operating hours: 28,082 h Spindle replacement at: 5,500 h EQUIPMENT Tools 4th axis Hofmann RW/NC160 Oil mist extraction system Strip filter system with internal cooling, 20 bar, with dual switching filter Documentation: Hedelius + Siemens Sinumerik Infrared probe: Renishaw

Condition: used, Aluminum silo (plastic granulate silo) standing on foot ring – used – designed for a bulk density of 0.6 kg/dm³ Capacity: 50,000 L Manufacturer: EVS Available quantity: 2 Diameter: approx. 3,500 mm Cylindrical height: approx. 6,900 mm Total height: approx. 8,100 mm (including 1,200 mm roof edge railing) Material: AlMg3 Bulk density: 0.8 kg/dm³ Top head inclination: 15° Cone inclination: 60° Equipment and connections: At the top head: - 1 x manway DN 600 with hinged cover - 1 x vent nozzle - 1 x roof edge safety railing with handrail - 2 x crane lifting eyes - 1 x flange for filling line - 1 x universal flange for measuring and control technology On the shell: - 1 x access door approx. 870 x 1,960 mm - Various pipe holders for filling pipe - 1 x filling pipe NW 80 - 1 x socket for level indicator One of the silos is additionally equipped with a single-flight access ladder with back safety cage. Ledeww Em Djpfx Aftead Otherwise as shown in the pictures and drawings.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 504.856, overall weight: 50 kg, load capacity: 6 kg, arm reach: 700 mm, controller model: KRC4, TECHNICAL DETAILS Load capacity: 6 kg Reach: 700 mm MACHINE DETAILS Laedpfx Aozidmqeftsd Controller: KRC4 Weight: 50 kg Performance data Connection voltage: 1 x 230 V Mains frequency: 50/60 Hz Full load current: 12 A Mains fuse: 16 A

Condition: ready for operation (used), Year of construction: 2020, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 1.302.981, overall weight: 280 kg, load capacity: 20 kg, arm reach: 1,813 mm, controller model: KR C4 NA UL, TECHNICAL DETAILS Load capacity: 20 kg Reach: 1,813 mm MACHINE DETAILS Controller: KR C4 NA UL Total weight: 280 kg Operating hours: approx. 500 hours Lsdezidhuspfx Aftoad EQUIPMENT Teach pendant (manual control) Safety enclosure with Siemens PLC 2 × SICK laser scanners 4 × Light curtains

Year of construction: 1983, condition: ready for operation (used), Various mixing and storage silos are available. 1) Stainless steel silo. 2) Stainless steel silo Zeppelin, year of construction: 1983, capacity: 32m³, friction angle range: 25°-45°, overpressure range: 5mbar-45mbar, max operating temperature: 50°C, bulk density: 0.6kg/dm³, silo height: 11250mm, silo diameter: 3000mm. 3) Stainless steel silo. 4) 3x identical HD-PE mixing silos, total height: approx. 10500mm, diameter: 3000mm, volume: approx. 49.5m³, mixing pipes: NW 150, motor power: 15kW. 5) 2x identical storage silos Zeppelin, year of construction: 1980, volume: 127m³, capacity: 119m³, silo diameter: 3500mm, inclination angle: 15°, hopper height: 1680mm, support ring height: 3700mm, total height: 17500mm. Documentation available. An on-site inspection is possible. Individual sale possible. Ljdpsxxl I Uefx Aftead

Condition: excellent (used), functionality: fully functional, overall weight: 1,100 kg, workpiece width (max.): 230 mm, workpiece height (max.): 320 mm, No minimum price – guaranteed sale to the highest bidder! The system was only used for demonstration and testing purposes and is therefore in very good condition. TECHNICAL DETAILS Number of satellites (workpiece holders): 6 Number of spray nozzles: 6 Lajdozh Nggjpfx Aftod Maximum workpiece height: 320 mm Maximum workpiece width: 230 mm Movement: Rotational movement of the satellites, horizontal up/down movement Settings: Adjustment of the number of strokes, speed, and height of the lifting movement MACHINE DETAILS Control system: PLC Siemens Total weight: 1,100 kg EQUIPMENT Light curtain

Condition: ready for operation (used), Year of construction: 2008, operating hours: 2,288 h, functionality: fully functional, machine/vehicle number: 936, workpiece weight (max.): 150 kg, power: 8 kW (10.88 HP), workpiece length (max.): 800 mm, workpiece width (max.): 600 mm, number of support arms: 16, No minimum price – guaranteed sale to the highest bidder! The machine is equipped with an optional support system and can therefore accommodate one large workpiece or a maximum of 16 smaller workpieces on the supports. TECHNICAL DETAILS Turbine power: 8 kW Workpiece size (single workpiece) max.: 800 x 600 mm Workpiece weight (single workpiece) max.: approx. 100 kg Number of positions in the support system: 16 Workpiece size (on support system) max.: 200 x 200 mm Workpiece weight (on support system) total max.: 150 kg Filter data Number of filter cartridges: 2 Total filter area: 20 m² Filter area per filter cartridge: 10 m² Air velocity: 1.25 m/min Compressed air data Compressed air pressure: max. 4–5 bar Compressed air consumption: approx. 7 m³/h Compressed air connection: G 1″ Permissible negative pressure: max. 1,500 Pa Dust container: 20 l Residual dust content in the exhaust air: below 5 mg/m³ MACHINE DETAILS Control unit: Pulse/time: 24 V, 1 phase, 50 Hz Solenoid valves: Voltage: 24 V, 50 Hz Timer: Input/output voltage: 24 V, 50 Hz Operating hours: 2,288 h Fan data Air flow: 2,000 m³/h Static pressure: 1,800 Pa Total pressure: 2,000 Pa Power consumption: 2.2 kW Motor power: 1.1 kW Motor voltage: 400 V Motor frequency: 50 Hz Motor phases: 3 phases EQUIPMENT Filter cartridges with 10 m² filter area each Aluminum venturi tubes Solenoid valves, type CA 25 DD Timer CG 03.06/04 Filter group Pressure regulator Pressure gauge 1″ ball valve Dust container, 20 l Ljdjzh Nf Aepfx Aftead Fan

Condition: excellent (used), Aluminum silo (plastic granulate silo) standing on a base ring – used – designed for a bulk density of 1.0 kg/dm³ Volume: 105,000 liters Manufacturer: Zeppelin Available quantity: 1 Diameter: approx. 3,000 mm Cylindrical height: approx. 17,500 mm Overall height: approx. 15,000 mm (including 1,250 mm roof edge railing) Material: AlMg3 Bulk density: 1.0 kg/dm³ Inclination of the upper floor: 15° Inclination of the cone: 60° Equipment and connections: In the upper floor: 1 x access dome DN 500 with hinged cover 1 x ventilation opening with hood 2 x flange DN 100 PN 10 (filling + level indicator) 1 x stub for full-level indicator Lsdpfx Afjlg Dcfotsad 1 x roof edge railing with handrail 2 x crane eyes On the shell: 1 x access door 850 x 2000 8 x pipe support for filling pipe DN 100 1 x filling pipe DN 100 1 x cable duct 1 x stub for full-level indicator The silo ends at the bottom in a 60° cone with a flange DN 200 (discharge height: approx. 500 mm) and a suction box. The currently connected measuring and control technology is included. However, no guarantee is given for its function! Additional cost: The silo has a two-part ladder with back protection and a landing platform (additional cost: €950 plus VAT). Otherwise, as shown in the pictures and drawing.

Year of construction: 2018, condition: refurbished (used), functionality: fully functional, workpiece weight (max.): 15 kg, inner dimension height: 95 mm, inner dimension length: 260 mm, negative pressure: 10,000 Pa, No minimum price – guaranteed sale to the highest bidder! Cleaning machine as a single-chamber flood system operating under full vacuum. The machine will undergo a complete overhaul in 2026 with an estimated value of €16,800 and is in very good condition. The original new price of the machine was €104,000. TECHNICAL DETAILS Cleaning medium: halogen-free hydrocarbon or modified alcohol Cleaning basket dimensions: 260 x 160 x 95 mm Batch weight max.: 15 kg Laodpfezh Eiqjx Afted MACHINE DETAILS Overall length: 1,260 mm Overall width: 1,110 mm Overall height: 2,600 mm Total weight: 1,600 kg EQUIPMENT CE marking in roll-on/roll-off standard version Complies with the 31st German Federal Immission Control Ordinance (BImSchV) (as of August 21, 2011) Complies with the Swiss Air Pollution Control Ordinance (as of March 1, 1998) Complies with the Austrian VAV Ordinance (as of July 26, 2022) Complies with the EU VOC Directive 199/13