GUK – K72 4KL - F4

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0250A0472, laser power: 5,000 W, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, TECHNICAL DETAILS Travel range, X-axis: 4,000 mm Travel range, Y-axis: 2,000 mm Laser power: 5,000 W MACHINE DETAILS Mains voltage: 400 V / 50 Hz Connected load: 105 kVA Control voltage: 24 V DC Klsdpfx Aszkr T Uop Aow Required fuse rating: 3 x 160 A Compressed air connection: 7 to 10 bar Nitrogen connection N₂: 30 bar Oxygen connection O₂: 20 bar

Condition: ready for operation (used), Year of construction: 2008, Herzog + Heymann mobile flat pile feeder F530, year of manufacture 2008 Herzog + Heymann M7.32, year of manufacture 2008 – suitable for miniature folds – 12 folding pockets – roller diameter 32mm – minimum fold length 25mm – maximum working width 52cm Kedpfx Apox Hbkdo Aelw – double rear knife shafts – transfer section Herzog + Heymann knife folding unit XS 300/6, year of manufacture 2008 – for small formats Herzog + Heymann upright sheet delivery 271, year of manufacture 2008 Stahl miniature upright sheet delivery STA30F, year of manufacture 1990 Herzog + Heymann transfer section 246/08, year of manufacture 2008 Optional: Herzog + Heymann small format feeder, year of manufacture 1991 – bottom suction feed

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: M704025, sheet thickness (max.): 100 mm, overall weight: 4,650 kg, passage width: 1,300 mm, TECHNICAL DETAILS Material thickness: 0.8 to 100 mm Passage width: max. 1,300 mm Workpiece dimensions: min. 180 x 100 mm Workpiece weight: max. 250 kg/m Feed rate: 0.2 to 6 m/min MACHINE DETAILS Dimensions & Weight Dimensions: 2,200 x 2,900 x 2,200 mm Machine weight: approx. 4,650 kg Kodpfezkr Rtsx Ap Aolw EQUIPMENT Processing: on both sides, dry

Condition: ready for operation (used), Year of construction: 2021, operating hours: 850 h, functionality: fully functional, machine/vehicle number: 07/21/158, power: 55 kW (74.78 HP), fuel type: electric, hopper volume: 2,800 l, rotational speed (max.): 90 rpm, rotor diameter: 500 mm, The machine has been used very little and is therefore in good condition with new blades! TECHNICAL DETAILS Infeed and Hopper Infeed opening: 1,800 x 1,500 mm Hopper capacity: 2.8 m³ Rotor Rotor diameter: 354 - 500 mm Rotor speed: approx. 90 rpm Tools and Screening Kljdpfjzkg Sfjx Ap Ajw Tools V5 + V7: 45 / 90 / 135 / 180 pcs. Screen opening: 10 - 50 mm Extraction Extraction nozzle diameter: 250 mm Air velocity: 32 m/s MACHINE DETAILS Performance and Drive Power: 55 kW (74.78 hp) Fuel type: electric Power requirement, dual drive: 2 x 45 / 2 x 55 kW Weight: approx. 5,800 kg EQUIPMENT Rotor shaft made of solid steel Hydraulic feed for constant material flow to the rotor Cardan-mounted hydraulic cylinders to prevent premature wear of the piston seals Screens with various screen openings for the required chip size, depending on the material and application Safety package with gearbox limit switch and reversing counter Changeable basket available New blades Note: Further technical information, such as the machine dimensions, can be found in the attached data sheet.

Year of construction: 1989, condition: used, Palletizer 1. Folding unit: 6 folding pockets Combination folding rollers Downstream knife shaft Kjdpfxsbi U Nzj Ap Ajlw Noise protection device 2. Folding unit: 4 folding pockets Combination folding rollers Noise protection device 3. Folding unit: 2 folding pockets Combination folding rollers Noise protection device

Condition: used, Year of construction: 2011, operating hours: 5,000 h, machine/vehicle number: M344Z16201031AHC, travel distance X-axis: 2,032 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, table load: 2,700 kg, spindle speed (max.): 12,000 rpm, The following repairs were carried out: Defective inverter identified and replaced Bearings in the Y-axis replaced; bearing set VTXZ Y-axis (5 pieces, 35x72) Rotary table adjusted Orientation adjusted TECHNICAL DETAILS Travel range X-axis: 2,032 mm Travel range Y-axis: 660 mm Travel range Z-axis: 610 mm Spindle speed: 12,000 rpm Spindle cooling: Internal cooling Rapid traverse rate X/Y/Z: 35 m/min Power: 18 kW Tool holder: SK 40 Tool positions: 40 Tool diameter with full occupancy: 75 mm Maximum tool weight: 10 kg Maximum tool length: 300 mm Kedpozka Hijfx Ap Aolw Table load: 2,700 kg Table clamping area: 2,285 x 660 mm T-slots in the table according to DIN 650: 5 Slot width: 18 mm H8 Slot spacing: 125 mm Positional accuracy X, Y, Z: 0.02 mm Repeatability X, Y, Z: 0.01 mm MACHINE DETAILS Footprint W x D x H, doors open / with control / chip conveyor: 6,950 x 5,150 x 3,700 mm Transport weight: 20,000 kg Machine weight: 18,000 kg Operating hours Machine hours: 11,417 hours Spindle hours: approx. 5,000 hours Further technical data can be found in the attached documents.

Condition: used, Year of construction: 2004, operating hours: 28,082 h, travel distance X-axis: 800 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, controller model: Siemens 840 D, spindle speed (max.): 13,000 rpm, The control system (PCU 50) was replaced in March 2024! The machine spindle was replaced after approximately 5,500 operating hours! TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 620 mm Travel range Z-axis: 520 mm Spindle speed: 13,000 rpm Number of tool slots in the tool magazine: 30 MACHINE DETAILS Control system: Siemens 840 D Operating hours Control system operating hours: 60,150 h Machine operating hours: 56,860 h Spindle operating hours: 28,082 h Spindle replacement at: 5,500 h EQUIPMENT Tools 4th axis Hofmann RW/NC160 Oil mist extraction system Strip filter system with internal cooling, 20 bar, with dual switching filter Klodpfjzka Aksx Ap Aew Documentation: Hedelius + Siemens Sinumerik Infrared probe: Renishaw

Condition: ready for operation (used), Year of construction: 2015, A Neopost inserting machine is available. Inserting capacity: 4500 letters/h, inserting capacity with 2 sheets (collected): 3400 letters/h, envelope feeder capacity: 400, inserting liquid tank: 1, document feeder capacity: 500 sheets. Envelope thickness: 4mm, min. document dimensions X/Y: 76mm/140mm, max. document dimensions X/Y: 228mm/406mm, min. envelope dimensions X/Y: 89mm/152mm, max. envelope dimensions X/Y: 165mm/264mm. Fold types: Spiral fold/Z-fold/single fold/double fold/parallel fold/non-fold. Machine dimensions X/Y/Z: approx. 3600mm/550mm/600mm, weight: approx. 400kg. Including the underframe (piece of furniture - green). Documentation available. On-site inspection is possible. Expected to be available from mid-May 2025. Kledjv N I Ayepfx Ap Ajw

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 504.856, overall weight: 50 kg, load capacity: 6 kg, arm reach: 700 mm, controller model: KRC4, TECHNICAL DETAILS Load capacity: 6 kg Reach: 700 mm MACHINE DETAILS Ksdpszidmqsfx Ap Aelw Controller: KRC4 Weight: 50 kg Performance data Connection voltage: 1 x 230 V Mains frequency: 50/60 Hz Full load current: 12 A Mains fuse: 16 A

Condition: ready for operation (used), Year of construction: 2020, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 1.302.981, overall weight: 280 kg, load capacity: 20 kg, arm reach: 1,813 mm, controller model: KR C4 NA UL, TECHNICAL DETAILS Load capacity: 20 kg Reach: 1,813 mm MACHINE DETAILS Controller: KR C4 NA UL Total weight: 280 kg Klodpfx Apszidhue Aew Operating hours: approx. 500 hours EQUIPMENT Teach pendant (manual control) Safety enclosure with Siemens PLC 2 × SICK laser scanners 4 × Light curtains

Year of construction: 1992, condition: used, Die-cutting press (Stanztiegel) Klodpfxjxcugus Ap Aew Brand: Simplacutter Size: 82x112 Year of manufacture: 1992

Condition: excellent (used), functionality: fully functional, overall weight: 1,100 kg, workpiece width (max.): 230 mm, workpiece height (max.): 320 mm, No minimum price – guaranteed sale to the highest bidder! The system was only used for demonstration and testing purposes and is therefore in very good condition. TECHNICAL DETAILS Number of satellites (workpiece holders): 6 Number of spray nozzles: 6 Maximum workpiece height: 320 mm Kljdpjzh Nggefx Ap Ajw Maximum workpiece width: 230 mm Movement: Rotational movement of the satellites, horizontal up/down movement Settings: Adjustment of the number of strokes, speed, and height of the lifting movement MACHINE DETAILS Control system: PLC Siemens Total weight: 1,100 kg EQUIPMENT Light curtain

Condition: ready for operation (used), Year of construction: 2008, operating hours: 2,288 h, functionality: fully functional, machine/vehicle number: 936, workpiece weight (max.): 150 kg, power: 8 kW (10.88 HP), workpiece length (max.): 800 mm, workpiece width (max.): 600 mm, number of support arms: 16, No minimum price – guaranteed sale to the highest bidder! The machine is equipped with an optional support system and can therefore accommodate one large workpiece or a maximum of 16 smaller workpieces on the supports. TECHNICAL DETAILS Turbine power: 8 kW Workpiece size (single workpiece) max.: 800 x 600 mm Workpiece weight (single workpiece) max.: approx. 100 kg Number of positions in the support system: 16 Workpiece size (on support system) max.: 200 x 200 mm Workpiece weight (on support system) total max.: 150 kg Filter data Number of filter cartridges: 2 Total filter area: 20 m² Filter area per filter cartridge: 10 m² Air velocity: 1.25 m/min Compressed air data Compressed air pressure: max. 4–5 bar Compressed air consumption: approx. 7 m³/h Compressed air connection: G 1″ Permissible negative pressure: max. 1,500 Pa Dust container: 20 l Klodezh Nf Aspfx Ap Asw Residual dust content in the exhaust air: below 5 mg/m³ MACHINE DETAILS Control unit: Pulse/time: 24 V, 1 phase, 50 Hz Solenoid valves: Voltage: 24 V, 50 Hz Timer: Input/output voltage: 24 V, 50 Hz Operating hours: 2,288 h Fan data Air flow: 2,000 m³/h Static pressure: 1,800 Pa Total pressure: 2,000 Pa Power consumption: 2.2 kW Motor power: 1.1 kW Motor voltage: 400 V Motor frequency: 50 Hz Motor phases: 3 phases EQUIPMENT Filter cartridges with 10 m² filter area each Aluminum venturi tubes Solenoid valves, type CA 25 DD Timer CG 03.06/04 Filter group Pressure regulator Pressure gauge 1″ ball valve Dust container, 20 l Fan

Condition: ready for operation (used), Year of construction: 2006, GUK folding machine FA 50/6 FA 52/4, year of manufacture 2006, equipped as follows: – Flat pile feeder FA 50 – 1st station FA 50 with 6 folding pockets, double pre-mounted knife shaft, top segment rollers, HHS cold glue 1 head, HHS hot glue with 2 heads, and transfer table. – 2nd station FA 52 with 4 folding pockets and transfer table, hydraulically height-lockable. – Knife shaft station SM 52 with 4 knife shafts, hydraulically height-adjustable. – Shingle delivery SM 52 – Vacuum/blast air pump – Window folding pocket – Various spare parts Kjdpfx Apsx Enduo Aslw

Year of construction: 2018, condition: refurbished (used), functionality: fully functional, workpiece weight (max.): 15 kg, inner dimension height: 95 mm, inner dimension length: 260 mm, negative pressure: 10,000 Pa, No minimum price – guaranteed sale to the highest bidder! Cleaning machine as a single-chamber flood system operating under full vacuum. The machine will undergo a complete overhaul in 2026 with an estimated value of €16,800 and is in very good condition. The original new price of the machine was €104,000. Kodpfx Ajzh Eiqop Aslw TECHNICAL DETAILS Cleaning medium: halogen-free hydrocarbon or modified alcohol Cleaning basket dimensions: 260 x 160 x 95 mm Batch weight max.: 15 kg MACHINE DETAILS Overall length: 1,260 mm Overall width: 1,110 mm Overall height: 2,600 mm Total weight: 1,600 kg EQUIPMENT CE marking in roll-on/roll-off standard version Complies with the 31st German Federal Immission Control Ordinance (BImSchV) (as of August 21, 2011) Complies with the Swiss Air Pollution Control Ordinance (as of March 1, 1998) Complies with the Austrian VAV Ordinance (as of July 26, 2022) Complies with the EU VOC Directive 199/13