Spacer board hill

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 400 mm, controller model: Heidenhain TNC 426 PB, spindle speed (max.): 9,000 rpm, No reserve price – guaranteed sale to the highest bidder! Increased pressure to sell – exceptionally attractive offer! TECHNICAL DETAILS Travel X-axis: 1,200 mm Travel Y-axis: 800 mm Travel Z-axis: 400 mm Machine table: 1,280 x 830 mm Nsdoywgvtjpfx Ahvocp Number of T-slots: 3x 18 H10 Spindle speed: 9,000 rpm Spindle taper: SK40 Spindle power: 9 kW Spindle torque: 84 Nm Max. linear axis speed: up to 30 m/min Tool changer: 24 stations MACHINE DETAILS Control system: Heidenhain TNC 426 PB Connection data: 400 V / 50 Hz Connected load: 32 kVA Fuse protection: 3x 63 A Transport dimensions Dimensions (L x W x H): 2525 x 2440 x 2700 mm Weight: 8,500 kg + 3 additional EU pallet spaces, each 1200 x 800 x 2200 mm

Condition: new, Year of construction: 2026, Drum chipper series ATH S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation ATH 220 series - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg ATH 330 series - Feed height: 300 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pieces - Number of counter knives: 2 pieces - Rotor diameter: 700 mm - Number of feed rollers: 3 pieces - Throughput capacity: up to approx. 70 rm/h * - Chipping length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Drive power feed rollers: 2 x 3.0 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chipper length, kW main motor, number of knives, feed Njdpsuz Hmxjfx Ahvecp Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: PE-WU 400-1804, travel distance X-axis: 540 mm, travel distance Y-axis: 280 mm, travel distance Z-axis: 260 mm, TECHNICAL DETAILS Ncsdpeytf Nisfx Ahvsp X-axis travel: 540 mm Y-axis travel: 280 mm Z-axis travel: 260 mm W-axis max. number of divisions: 999 MACHINE DETAILS Motor power: 4.6 kW EQUIPMENT A-axis Note: The machine suffered fire damage as a result of a deflagration 3 years ago. The fire damage was repaired, the machine has been partially overhauled since and is fully operational.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning length: 63 mm, rotational speed (max.): 3,750 rpm, overall weight: 6,800 kg, drilling depth: 63 mm, The machine comes complete with collets, holders, and other accessories! Ncodpsytf Ekjfx Ahvep TECHNICAL DETAILS Max. turning length: 63 mm Max. drilling depth: 63 mm Max. workpiece passage: 26 mm Max. workpiece feed: 125 mm Spindle speed range turning: 236 - 3,750 rpm Spindle speed range thread cutting: 13 - 1,875 rpm MACHINE DETAILS Required floor space: 7.16 x 2.3 m Height: 2 m Weight: 6,800 kg EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides 4 change gears for main and feed drive Service tools

Condition: new, Year of construction: 2023, Application combs 10 mm Application combs 15 mm Ncodeiacbpopfx Ahvsp Application combs 20 mm finger joint profile 15 mm finger joint profile 20 mm delivery time 3 days

Condition: not inspected (used), Year of construction: 1996, functionality: unexamined, machine/vehicle number: 43, turning diameter over cross slide: 32 mm, number of spindles: 6, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,000 kg, TECHNICAL DETAILS Swing diameter over cross slide: 32 mm Max. spindle speed: 3,150 rpm Number of spindles: 6 Ncjdjyuxq Aspfx Ahvsp Round bar capacity: 32 mm Square bar capacity: 22 mm Hexagonal bar capacity: 27 mm Max. bar feed: 125 mm Max. travel long slide: 100 mm Maximum number of parts: 35 Machining speed: from 1.12 s to 125 s Spindle speeds: from 200 rpm to 3,150 rpm Number (steps): 49 Machining time: from 0.63 s to 200 s MACHINE DETAILS Voltage: 50 Hz, 3x 380 V Power: 18.5 kW Dimensions & Weight Dimensions (L x W x H): 3,850 x 1,390 x 2,200 mm Weight: approx. 8,000 kg EQUIPMENT Knoll AE 1114 high-pressure system Filtration system 5-bar and 40-bar pumps individually adjustable for processing stages Plate heat exchanger Lifting pump for chip conveyor

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, workpiece length (max.): 2,500 mm, workpiece width (max.): 700 mm, number of spindles: 40, TECHNICAL DETAILS Panel length min.: 170 mm Panel length max.: 2,500 mm Panel width min.: 50 mm Panel width max.: 700 mm Number of injectors: 2 Number of support units: 2 Vertical spindles Speed: 2,800 rpm Number of spindles: 40 Horizontal spindles Speed: 2,780 rpm Number of spindles for horizontal drilling in Y-axis: 6 Number of spindles for horizontal drilling in X-axis: 8 (4 on each side) Nsdpsyq Irhjfx Ahvecp MACHINE DETAILS Control system: WINDOWS Motor power (vertical drilling): 3 kW Motor power (horizontal drilling): 2.2 kW Note: Tools not included The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods prior to collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 6106

Condition: excellent (used), Year of construction: 2022, Hydraulic saw tensioner for gang saws Die Sägenmacher GmbH / Thöress Year of manufacture: 2022 Total length: 710 mm Total width: 215 mm Total height: 85 mm With plenty of spare parts Very good condition - available immediately Location: Austria, near Ried im Innkreis Ncedpfx Ahowbu S Revsp

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, workpiece height (max.): 90 mm, workpiece width (max.): 3,200 mm, workpiece length (max.): 3,200 mm, edge thickness (max.): 3 mm, The machine has the following configuration: Number of panel sizing/milling units on the left side: 5 Milling unit (AS10) Double finishing cutter, top and bottom 2 pre-milling units Milling unit Number of edge processing units: 10 End trimming Top and bottom trimming (rough) Fine trimming for chamfering and rounding Corner rounding (AR34, 4 motors) Edge milling (FB40, 1 motor) Edge scraping Belt sanding (1 motor) Glue scraping Polishing (2 motors) Spray device TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 90 mm Maximum panel length: 3,200 mm Maximum panel width: 3,200 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm Ncedpfxjyq Avhs Ahvjp FEATURES Feed chain with carriers Pressure applied via rubber belt Panel guide rails with NC positioning Edge roll magazine with 6 positions Hot melt adhesive system for PUR adhesive NORDSON Roller set for edge pressing 4 pressure rollers with NC positioning Spray device mounted on upper cabinets The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7685

Condition: not inspected (used), functionality: unexamined, battery capacity: 625 Ah, battery voltage: 48 V, overall weight: 1,500 kg, No reserve price – guaranteed sale to the highest bidder! MACHINE DETAILS Battery voltage: 48 V Battery capacity: 625 Ah Ncedpfxjytpqwj Ahvsp Battery condition: very good, measured at 51.76 V Battery type: 5PzS625 Dimensions & Weight Dimensions (L x W x H): 83 x 63 x 63 cm Weight: 1,500 kg EQUIPMENT Battery from former Linde service Last service valid until 10/2026 All dimensions are approximate. No liability is accepted for typing or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible on site with large forklift at your own risk. Collection ONLY upon receipt of email payment confirmation! Collection WITHOUT prior notification Monday to Friday 7:00–16:30. If the mast is too high for transport, it can be removed on request. In case of delayed collection, a storage fee of €20 per machine per day will apply (payment must be made before collection).

Condition: good (used), Year of construction: 2006, Drum chipper, high-speed with horizontal infeed max. infeed width 450 mm max. infeed height 140 mm Motor 75 kw Nsdpfsu Rl Ruox Ahvocp with frequency converter for variable speed no vibrating chute included

Condition: not inspected (used), functionality: unexamined, battery capacity: 750 Ah, battery voltage: 48 V, overall weight: 1,000 kg, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Battery voltage: 48 V Battery capacity: 750 Ah Battery type: 6 PzS 750 Measured battery output: 51.23 V Dimensions & Weight Dimensions (L x W x H): 83 cm x 73 cm x 63 cm Weight: 1,000 kg FEATURES Battery from former Still service inventory All dimensions are rounded values. No liability is accepted for typographical or measurement errors. COLLECTION TERMS Side loading up to 5 tons possible on site using a large forklift at your own risk. Collection ONLY with email payment confirmation! Ncsdpfxeytpp He Ahvop Collection WITHOUT prior appointment Monday to Friday, 7:00 a.m. – 4:30 p.m. An excessive mast height can be dismantled for transport upon request. If collection is not made within the specified period, a storage fee of €20 per machine per day will be charged (payment due before collection).

Condition: not inspected (used), functionality: unexamined, Year of construction: 2018, machine/vehicle number: 996294, battery capacity: 625 Ah, battery voltage: 48 V, overall weight: 1,500 kg, No reserve price – guaranteed sale to the highest bidder! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 830 x 630 x 630 mm Weight: 1,500 kg Battery voltage: 48 V Battery capacity: 625 Ah Battery type: 5PzS625 Battery performance: measured at 51.38 V Njdpfoytpn Asx Ahvscp EQUIPMENT Battery from former Linde service All dimensions are rounded figures. No guarantee is given for typographical or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with large forklift on site, at buyer’s own risk. Collection ONLY with email payment confirmation! Collection WITHOUT prior appointment Monday to Friday, 7:00–16:30. If the mast is too high for transport, removal can be arranged on request. In case of late collection, a storage fee of €20 per machine per day will apply (payment due before pickup).

Condition: ready for operation (used), Drum motor 2.2 kW and 3.0 kW 230/440 V, 12.3/7.1 A, 50 Hz, 2.5 m/s Motor type TM 220 Diameter 220 mm, width 500 mm IP 67, cos 0.76, oil volume 5 litres, weight 60 kg 20 units in stock drum motors motorised roller cylindrical motor GRECON feed unit Nsdpfjq Acftex Ahvocp

Condition: not inspected (used), functionality: unexamined, Year of construction: 2021, machine/vehicle number: 053423392, battery capacity: 930 Ah, overall weight: 2,178 kg, No reserve price – guaranteed sale to the highest bidder! MACHINE DETAILS Battery: 80 V 930 A Nodpoytpnpsfx Ahvecp Nominal energy: 70.7 kWh Battery condition: very good, measured at 83.39 V Dimensions & Weight Dimensions (L x W x H): 102 x 100 x 80 cm Weight: 2,178 kg EQUIPMENT Battery from a former Linde service unit All measurements are approximations. No liability is assumed for typographical or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with a large forklift on site at your own risk. Collection ONLY with e-mail payment confirmation! Collection WITHOUT prior notice Monday to Friday 7:00 am–4:30 pm. An overly high mast can be dismantled for transport upon request. If not collected within the agreed timeframe, a storage fee of €20 per machine per day will be charged (payment must be settled before collection).