Stationary extraction system

Condition: used, Year of construction: 2010, machine/vehicle number: 1000017741, inner dimension length: 1,000 mm, inner dimension width: 840 mm, inner dimension height: 815 mm, operating temperature: 1,700 °C, usable tank capacity: 685 l, No minimum price – guaranteed sale to the highest bidder! The machine was professionally dismantled and stored. All parts and connections are labeled for reassembly. An on-site inspection is possible at any time. TECHNICAL DETAILS Furnace chamber and usable space Usable batch space (W × H × L): 840 × 815 × 1,000 mm Total length of the graphite box: approx. 1,100 mm Usable volume: approx. 685 l Operating temperature: max. 1,700 °C Operating temperature under partial pressure: max. 1,500 °C Operating temperature under vacuum: max. 1,700 °C Temperature uniformity: ± 10 K Temperature fluctuation in the steady state: ± 5 K MACHINE DETAILS Lhsdpfxsz I Tt Ij Ab Aon Process pressure range: 1 × 10⁻² < p < 1,040 mbar Final pressure in the empty, clean, and cold furnace: < 1 × 10⁻² mbar Leak rate: < 5 × 10⁻³ mbar·l/s Power supply: 3 × 400 V, 50 Hz Permissible voltage fluctuation: max. ± 5 % Installed heating power: max. approx. 190 kW Electrical power of the pump station: approx. 14 kW Cooling water flow rate: approx. 150 l/min Cooling water temperature: 20–30 °C Cooling water pressure: 2–4 bar Cooling water quality requirements: according to specification PW 800 943 ND Compressed air for valve operation: 4–5 bar Nitrogen inlet pressure: 5–7 bar Hydrogen inlet pressure: 5–7 bar EQUIPMENT Double-walled furnace chamber made of stainless steel with water cooling Internal graphite box for precise guidance of the process gases Post-cleaned graphite components Automatic control of the entire process Pump station Labeled lines and connections for easier recommissioning Note: Two internal graphite heating elements were damaged during dismantling and must be replaced.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, Equipment: cabin, Paint/spray booth dimensions without fan and control Panel! Extraction surface - dimensions (mm): 4430(w)x1900(h) Overall dimension(mm): 4530(w)x2350(h)x1910(d) Technical data: - Fan power 4.4kW (ATEX) - Fan suction capacity: 24000 m³/h (max 1200Pa) - Lighting: 2 pcs 2x58W (ATEX) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation Ljdpfxsia Taxs Ab Aehn - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,270 h, laser type: fiber laser, laser power: 4,000 W, sheet thickness (max.): 20 mm, overall weight: 9,700 kg, year of last overhaul: 2025, The system must be dismantled between November 20, 2026, and November 22, 2026! Ledpjz I S Uwsfx Ab Aehn TECHNICAL DETAILS Laser type: Fiber laser Laser power: 4,000 W Sheet metal thickness (max.): 20 mm Sheet metal thickness steel (max.): 20 mm Sheet metal thickness stainless steel (max.): 20 mm Sheet metal thickness aluminum (max.): 20 mm MACHINE DETAILS Control type: CNC control Automation level: Automatic Actuation type: Electric Power: 4 kW (5.44 hp) Input voltage: 400 V Input frequency: 50 Hz Type of cooling: Water Compressed air connection: 7 bar Laser operating hours: 13,270 h Year of last overhaul: 2025 Dimensions & Weight Dimensions (L x W x H): 9,310 x 7,813 x 2,300 mm Total weight: 9,700 kg EQUIPMENT CE marking Central lubrication system Cooling unit Documentation/Manual Dust extraction Emergency stop switch Fume extraction Safety light curtain

Condition: used, machine/vehicle number: CT1133L70678, Year of construction: 2021, operating hours: 6,200 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,200 kg Lifting height: 1,924 mm Fork length: 1,150 mm MACHINE DETAILS Battery year of manufacture: 08/2021 Battery voltage: 24 V Battery capacity: 375 Ah Battery voltage at rest: 25.3 V Dimensions & Weight Lhodpfo Ad Rdiex Ab Aon Dimensions (L x W x H): 2,500 x 800 x 2,200 mm Weight: 1,500 kg Service valid until: 03/2027 UVV (occupational safety) valid until: 03/2027 Operating hours: 6,200 h EQUIPMENT Initial lift Formerly a Linde full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible using a large forklift on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 337

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 10000241, workpiece height (max.): 160 mm, workpiece width (max.): 310 mm, number of spindles: 4, WEINIG POWERMAT 1500 - SPECIAL MACHINE CONFIGURED FOR MILLING WOODEN DOOR FRAME PANELS Working width 30 - 310mm (with tool flight circle 93-125mm) Working height 10 - 160mm (with tool flight circle 93-163 mm)Description of machine parameters Number of spindles 4 Spindles bottom 1 Spindles right 1 Lhjdpfx Asuygcweb Aon Spindles left 1 Spindles top 1 Separate motor for each spindle Electronic feed incl. brake, infinitely variable 5-40 m/min. Short infeed table 1.2 m long with 2 driven rollers above the table Hard-coated machine table surface Manual lubricant pump WEINIG Comfort Set Control system WEINIG MEMORY PLUS-SYSTEM CE mark Declaration of Conformity

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS GENERAL DATA Manufacturer: Linde Year of manufacture: 2022 Type: 48 V / 20 Ah ELECTRICAL DATA Battery voltage: 48 V Battery capacity: 20 Ah MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 600 mm Width: 600 mm Height: 800 mm Weight: 50 kg EQUIPMENT 2 lithium-ion batteries Charger Battery connector Wall plug Lot number 3632 Collection conditions: Side loading up to 6 tons with a large forklift on site is possible. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. Lede Ad N S Ejpfx Ab Aohn If collection is not carried out within the specified timeframe, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection.

Condition: ready for operation (used), functionality: fully functional, operating hours: 1,952 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS GENERAL DATA Manufacturer: Linde Type: P50 Year of manufacture: 2019 Drive: Electric Operating hours: 1,952 h Leds Ad N Slspfx Ab Aohn PERFORMANCE Towing capacity: up to 5,000 kg BATTERY Battery date: 06/03/2019 (?) Battery voltage: 24 V Battery capacity: 500 Ah Rest voltage: 24.7 V INSPECTIONS AND SERVICE Service valid until: 07/2027 UVV (occupational safety) valid until: 07/2027 MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 1,700 mm Width: 800 mm Height: 1,400 mm Own weight: 1,000 kg Lot number: 453 Collection conditions: Side loading up to 6 tons is possible using a large forklift truck on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection.

Condition: ready for operation (used), Width: 1000 mm Length: 1500 mm Plate height: 195 mm Height of the feet: 600 mm Total height, working height: approx. 800 mm Weight: Lhodpfx Absgq Naws Asn

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS COMPATIBILITY FEM class: FEM 3 Suitable for forklift load capacity: 3,000–5,000 kg Suitable for: Linde H50D FEATURES Design: 360° rotating device with rotating clamp Internal opening: approx. 400–1,800 mm Fork positioner: present (?) MACHINE DETAILS Lhedpj Ad N Igofx Ab Asn MANUFACTURER AND MODEL Manufacturer: Linde Type: Rotating clamp Year of manufacture: 2020 Previous use: Linde H50D with 5,000 kg load capacity DIMENSIONS Width: approx. 1,700 mm Height: approx. 1,000 mm Length: approx. 1,250 mm EQUIPMENT 360° rotating device Rotating clamp Fork positioner Lot number: 1139 Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection.

Condition: ready for operation (used), functionality: fully functional, operating hours: 7,794 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Manufacturer: Still Type: EXU-SF20 Year of manufacture: 2019 Operating hours: 7,794 h Lifting Capacity and Lift Lifting capacity: 2,000 kg Lift height: 150 mm Fork length: 1,150 mm Battery Battery voltage: 24 V Battery capacity: 250 Ah Battery year of manufacture: Measured idle voltage: 25.4 V MACHINE DETAILS Dimensions and Weight Length: 2,000 mm Width: 800 mm Height: 1,400 mm Own weight: 800 kg EQUIPMENT Battery charger Functional and condition video available Lhodpfe Ad N H Aex Ab Aon Lot number: 340 Collection Conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck bed height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection.

Condition: new, Year of construction: 2026, CNC drill and dowel inserting machine for fully automatic bore, glue and dowel driving. The drill glue and dowel machining center with compactness, efficiency, quality and flexibility. Short introduction: • Universal CNC controlled drilling and dowel inserting machine • Glue shot monitoring via GIC • Closed gluing system • Suitable for panel and solid wood processing • Optional additional horizontal and vertical drilling spindles Lhjdedx Axfopfx Ab Aon • Relieves CNC machining centers • Optimal complement to nesting machines

Condition: ready for operation (used), functionality: fully functional, operating hours: 5,515 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity Load capacity: 1,200 kg Lifting Lifting height: 1,924 mm Fork length: 1,150 mm Initial lift: Simultaneous lifting of 2 pallets Ground clearance: Increased by initial lift, suitable for uneven surfaces Battery Battery voltage: 24 V Battery capacity: 375 Ah Measured battery voltage: 24.6 V Battery year of manufacture: 2023 MACHINE DETAILS Machine data Manufacturer: Linde Type: D12HPSP Lhjdo Ad N E Espfx Ab Aen Year of manufacture: 2021 Operating hours: 5,515 h Own weight: 1,500 kg Dimensions Overall length: 2,500 mm Overall width: 800 mm Overall height: 2,200 mm EQUIPMENT Initial lift Battery year of manufacture 2023 Formerly a Linde full-service unit Lot number: 370 Collection conditions: Side loading up to 6 tons possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not made within the specified time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Manufacturer: Linde Type: D12HPSP Year of manufacture: 2021 Operating hours: 6,655 h Lifting Capacity and Lift Lifting capacity: 1,200 kg Lifting height: 1,924 mm Fork length: 1,150 mm Initial lift: available Pallet capacity: 2 pallets simultaneously Lhjdpfx Ao Ad N Elsb Aen Battery Battery year of manufacture: Week 44/2023 Battery voltage: 24 V Battery capacity: 375 Ah Measured battery voltage: 25.5 V MACHINE DETAILS Dimensions and Weight Overall length: 2,500 mm Overall width: 800 mm Overall height: 2,200 mm Own weight: 1,500 kg EQUIPMENT Initial lift for increased ground clearance on uneven surfaces Previously a Linde full-service machine Lot number: 390 Collection conditions: Lateral loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection.

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, operating hours: 4,452 h, cutting height (max.): 120 mm, cutting depth: 340 mm, main saw diameter: 380 mm, Raimann KR 310 E 340/120 multi-saw with movable disc - manufactured in Germany Ljdpfx Asrhig Eob Aehn - year of manufacture 1990 - DTR - number of hours 4452 h TECHNICAL PARAMETERS: - track width 340 mm - cutting height max 120 mm - cutting height with movable disc 85 mm - engine power 30 kW - minimum length of the element 700 mm - width of table 740 mm - feed regulated on inverter 6-48 m/min - three rows of pawls - possibility to mount a bush - sleeve diameter 80 mm - length of fixed sleeve 190 mm - electrical adjustment of cutting height - electrical adjustment of shaft height - four top pressure rollers - automatic central lubrication - laser - ruler - spigot diameter 250 mm Overall dimensions of the machine 250x200x220 cm weight 2000 kg

Condition: ready for operation (used), functionality: fully functional, operating hours: 10,386 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS GENERAL Manufacturer: Still Type: RX20-18 Year of manufacture: 2019 Drive type: Electric Operating hours: 10,386 h Load capacity: 1,800 kg LIFTING EQUIPMENT Mast type: Triplex mast Lifting height: 4,500 mm Full free lift: available FORKS AND HYDRAULICS Fork length: 1,000 mm Hydraulic valves: 3rd + 4th valve Fork positioner: hydraulic Side shifter: available BATTERY Battery year of manufacture: Battery voltage: 48 V Battery capacity: 898 Ah Lhodpfx Abo Ad N D Ue Asn Battery idle voltage: 54.6 V MACHINE DETAILS DIMENSIONS AND WEIGHT Overall length: 3,000 mm Overall width: 1,150 mm Overall height: 2,060 mm Dead weight: 3,400 kg EQUIPMENT Battery charger Semi-cabin Lateral fall protection LED work light (rear) Orange warning light Comfort seat with lumbar support Seat heating Lot number: 229 Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Loading from the rear via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection.