Power chuck three-jaw chuck

Condition: ready for operation (used), machine/vehicle number: 16244, Year of construction: 2020, operating hours: 7,200 h, load capacity: 2,000 kg, lifting height: 4,300 mm, fuel type: electric, mast type: triplex, battery voltage: 48 V, fork length: 1,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 4,300 mm Attachment Manufacturer: KAUP Model: 2 T 163 S Design: Fork positioner with side shift Overall width: 1,120 mm Side shift: ±425 mm Opening range: 140–990 mm ISO class: 2 Weight: approx. 129 kg Fork Design: Pin-type forks Load capacity per fork pair: 2,500 kg at a load center of 600 mm Fork dimensions: 120 × 40 × 1,000 mm ISO class: 2 Weight per fork: approx. 57 kg Remaining load capacities At 3,000 mm lifting height and 500 mm load center: approx. 1,620 kg At 3,000 mm lifting height and 600 mm load center: approx. 1,440 kg At 3,000 mm lifting height and 1,000 mm load center: approx. 1,000 kg MACHINE DETAILS Mast: Triplex mast FSV4300 Hydraulic valves: 4 Drive: Electric Operating hours: approx. 7,200 h Total hours: approx. 16,800 h Battery voltage: 48 V PC power supply: 24 V / 80 W Charger connection: 400 V Batteries: 4 pcs, 48 V / 750 Ah BFS Chargers: 2 Hawker Werk HF, 48 V / 120 A EQUIPMENT KAUP fork positioner with side shift Continental SE tires, front and rear, abrasion-resistant, including K64A Grammer MSG65 driver's seat with artificial leather cover Direction switch in the armrest Mini-lever control Multi-function display with wheelbase indicator Itsdpfxjzt R A Te Abnok Panoramic mirror 2 LED work lights with protection Acoustic reversing signal Blue LED warning light to the rear Flashing beacon below the operator's protective roof Seat belt switch with OPS seat switch Smart Access with driver card Side battery cover The overall height and weight of the forklift must be taken into account when selecting the transport vehicle. There is no loading ramp on site. However, a forklift with a load capacity of 15 tons is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The specifications are the technical data from the original offer. No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the photos provided or inspect the goods on site before the auction ends.

Year of construction: 2019, operating hours: 4,525 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 12, BAR PEELING MACHINE AND BAR STRAIGHTENING MACHINE IN SET The equipment is in perfect working condition and can be inspected under power. Fully retrofitted in 2019 (completely new mechanics and electronics) Working range: Ø 20 – Ø 80 mm Bars length: 2.5 – 6.0 m Processing tolerance: ISO h9 (possible h8) Peeling depth: up to 3.5 mm, depends on the steel type Steel types: carbon steel, bearing steel, spring steel, etc. Feeding speed: digitally adjustable 0.5 – 12 m/min Cutting head revolutions: up to 1700 RPM Cutting tools: two sets of 4 knives each with automatic digital positioning (triangular and long knifes) Automotive loading table with bar counter Feeding roller with motorized height adjustment Infeed pressure rolls – 4 vertical rolls with inverted DC motor Peeling machine, consists of: - Front guiding system - Peeling head with 4 knifes - Rear guiding system Bar extraction carriage Main motor and transmission Ijdpfx Aswqb Scobnstk Output pressing rolls - tween Unloading table with motorized height adjustment Collector with counter and automatic collection of finished bars Hydraulic unit – completely new Electric cabinet – new of two modules.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 11413, Year of construction: 2019, operating hours: 12,190 h, load capacity: 5,000 kg, lifting height: 3,300 mm, fuel type: diesel, mast type: duplex, power: 55 kW (74.78 HP), fork length: 2,400 mm, No minimum price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: approx. 3,300 mm Load capacity: 5,000 kg Attachment: Kaup 4.8T160BIZ or 4.8T160BIZA Design: Integrated fork positioner with side shift Forklift side connection: Integrated, suitable for Toyota 40-8FD50N Fork side connection: ISO class 3B Hydraulic functions: 2 Overall width: approx. 1,350 mm Opening range: 0–1,000 mm, edge to edge Overhang: approx. 202 mm from the front edge of the lifting carriage Lateral shift: up to ±250 mm from the forklift's longitudinal axis Attachment load capacity: 2,500 kg at a load center distance of 1,200 mm Remaining load capacity: 2,500 kg with centered load and a load center distance of 1,200 mm Attachment weight: approx. 650 kg Design: Bolt-on forks Iedpoztwm Ssfx Abnetk Fork cross-section: 160 × 50 mm Fork length: 2,400 mm Load guard Kaup 4.8T479.1 Design: Load guard with horizontal square tubes Width: approx. 1,000 mm Height from floor: approx. 1,200 mm for ISO class 3B Weight: approx. 24 kg MACHINE DETAILS Mast: Duplex tele-mast Engine: Diesel Rated power: 55 kW Front track width: 1,150 mm Front tire size: 300-15/8.00 Rear tire size: 7.00-12/5.00 Weight: 8,040 kg Operating hours: approx. 12,190 h EQUIPMENT EEC specification SAS – System for active stability Variable displacement pump 4-way hydraulics with hose routing for the 3rd and 4th valve SE tires front, single tire SE tires rear Professional cabin Air conditioning Mini-lever with direction switch and armrest Rear grab handle with horn button Deluxe multi-function display OK monitor Warning light LED blue spot warning light to the rear Fire extinguisher: 2 kg Gear change protection Cold weather package with 5W-30 oil and larger battery German type plate TIESA Modification Center Smart Access driver access card Diesel particulate filter Integrated Kaup fork positioner Valve block side shift Kaup load guard The overall height and weight of the forklift must be taken into account when selecting the transport vehicle. There is no loading ramp on site. However, a forklift with a load capacity of 15 tons is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The technical data provided are based on the original offer. No guarantee is given for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 917, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Spindle type: Z80-K530.04 Drive type: SIE / HD MACHINE DETAILS Power: 24.5 kW Voltage: 230 / 400 V Frequency: 50 Hz Motor type: SERVO EQUIPMENT CE marking Itodpjztxgmsfx Abnsk Measuring probe Tool holders (as shown in the picture)

Condition: used, Year of construction: 1961, max. workpiece diameter 100 mm min. workpiece diameter 10 mm workpiece length 1000 mm total power requirement 16 kW weight of the machine ca. 3 t dimensions of the machine ca. 0 m Iedpswwl I Iefx Abnjtk The guides have been outdated 10 years ago

Condition: ready for operation (used), Year of construction: 2017, operating hours: 7,315 h, functionality: fully functional, machine/vehicle number: 4445, travel distance X-axis: 2,320 mm, travel distance Y-axis: 1,980 mm, travel distance Z-axis: 860 mm, controller model: Siemens Sinumerik 840D sl, spindle speed (max.): 40,000 rpm, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was €425,000 plus VAT! Note: This sale concerns the sister machine of the identical Hamuel Reichenbacher machine that was recently auctioned. TECHNICAL DETAILS Travel distance X1/X2 axis: 2,320 mm Travel distance X3/X4 axis: 2,320 mm Travel distance Y1/Y2 axis: 1,980 mm Travel distance Z1/Z2 axis: 860 mm Rotational range B1 axis: ±181° Rotational range B2 axis: ±181° Rotational range C1 axis: ±361° Rotational range C2 axis: ±361° Spindle speed: 40,000 rpm Tool holder: HSK-E40 Spindle power: 7 kW Number of spindles: 2 Travel speed in X direction: 90 m/min Travel speed in Y direction: 45 m/min Travel speed in Z direction: 90 m/min Number of tools: max. 6 Tool diameter with 4 tools: max. 40 mm Tool diameter with 2 tools: max. 240 mm Tool length from reference plane: max. 270 mm Tool weight: max. 2 kg Total weight of all tools: max. 24 kg MACHINE DETAILS Control system: Siemens Sinumerik 840D sl Compressed air supply Compressed air quality: according to DIN ISO 8573-1 Pressure: min. 7 bar Air volume flow: approx. 1,000 Nm³/min Voltage: 400 V (±5 %) Frequency: 50 Hz Mains connection: 3 phases, neutral conductor and protective conductor Short-circuit strength Ic: 17 kA Dimensions & Weight Dimensions (X x Y x Z): approx. 5,800 x 3,600 x 3,000 mm Machine weight: approx. 15.0 t Operating Hours Spindle hours, spindle 1: 7,872 h Itjdpoztxczjfx Abnek Spindle hours, spindle 2: 7,315 h EQUIPMENT Chip conveyor Hexagon 3D measuring probe Note: Further technical details can be found in the attached offer. Clamping devices and tools are not included in the offer.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 58,782 h, controller model: Siemens Sinumerik 840D, laser power: 3,200 W, working length: 3,000 mm, working width: 1,500 mm, pallet changer: automatic, No minimum price – guaranteed sale to the highest bidder! The machine must be dismantled in week 35. However, collection is possible in weeks 36 and 37. TECHNICAL DETAILS Laser type: CO₂ laser Laser power: 3.2 kW Working length: 3,000 mm Working width: 1,500 mm MACHINE DETAILS Ijdszrfqiepfx Abnotk Control model: Siemens Sinumerik 840D Laser hours (laser on): 107,255 h Laser hours (beam on): 58,782 h EQUIPMENT Automatic pallet changer

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Itodpfxouz If Nj Abnjk Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: ready for operation (used), functionality: fully functional, tank capacity: 73 l, usable tank capacity: 50 l, total length: 1,200 mm, total width: 1,500 mm, total height: 2,000 mm, Process system for the production of creams, ointments, and suppository masses Design for foaming products The heated container is vacuum-resistant up to -1 bar and pressure-resistant up to 2.4 bar. TECHNICAL DETAILS Temperature range, container interior, max.: 95°C Jacket temperature, max.: 140°C Usable volume: 50 L Total volume: 73 L Isdszrfbbjpfx Abnetk Minimum filling volume: 10 L Homogenizer Model: Brienz RF 112 M-2 Power: 4 kW Speed: max. 2,850 rpm Mixer/Scraper Gearbox: SEW FAF 37 Speed: max. 28 rpm MACHINE DETAILS Space requirement: 1,200 × 1,500 × 2,000 mm

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 111302, functionality: fully functional, temperature: -75 °C, total length: 1,300 mm, total width: 1,300 mm, total height: 2,000 mm, usable tank capacity: 100 l, The system was professionally dismantled and decommissioned by the manufacturer. The plates were stacked together. TECHNICAL DETAILS Ice condenser volume: 100 l Ice condenser capacity: 12 kg Ice condenser output: 8 g/24 h Ice condenser temperature: −75 °C MACHINE DETAILS Platform dimensions: 350 × 450 mm Platform area: 0.48 m² Platform spacing: 111 mm Refrigerant: Isceon 89 Heat transfer fluid: Syltherm HF Itsdpezrfa Dofx Abnek Electrical equipment: 400 Volt, 3 phases, 50 Hz Dimensions & Weight Space requirement for freeze-drying system: 1,300 × 1,300 × 2,000 mm Space requirement for additional component: 1,800 × 600 × 2,000 mm Weight: approx. 1,500 kg

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Itedpjxgu R Ijfx Abnsk Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steering ring

Condition: like new (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1393, arm reach: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! Includes notebook and PCdemis 2016 software! TECHNICAL DETAILS FP2 Mobility Pack: included Measuring software: PCdemis (2016) Notebook: DELL M 6800 with a 17-inch screen and Windows 10 Tripod: Brunson heavy-duty rolling tripod, type 230 FIX Measuring range: 2,500 mm Accuracy class: 5 Number of axes: 6 Target single-point deviation: 0.020 mm Target volumetric accuracy: ±0.029 mm Arm weight: 8 kg Probe set: Probe with ruby ball 3mm, 6mm and with steel ball 15mm EQUIPMENT - Carbon fiber double-tube construction enables separation of stability and measurement - AbsoluteArm series can start measuring directly without referencing - Probing system with automatic probe recognition - Mounting plate with magnet - FP2 Mobility Pack - Transport case - Magnetic tripod - Test bar L = 700 mm - Test sphere D = 25 mm - Power supply with connecting cable - USB cable measuring arm - notebook - Dust cover - New pressure cylinder installed Isdpfxezrd R Uj Abnotk - Relabeling of the measuring arm before calibration 2023 - ISO 10360 acceptance with certificate 2023 is included Shipping conditions - Ex works, without additional packaging (measuring arm in case and notebook in protective cover) and Brunson rolling tripod – i.e. 3 parts - If the buyer arranges collection via a shipping company, the seller recommends special packaging (approx. 160 x 70 x 70 cm cardboard box on a pallet, with bubble wrap inside) and a Euro pallet (Brunson rolling tripod) at a price of €250, secured with strapping to the pallet.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 31,113 h, functionality: fully functional, machine/vehicle number: NHX40KB0083, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 660 mm, controller model: MITSUBISHI MSX-853 IV, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 560 mm Travel range, Y-axis: 560 mm Travel range, Z-axis: 660 mm Feed rate: 0–60 m/min Distance from spindle nose to table surface: 80–640 mm Number of pallets: 2 Pallet dimensions: 400 × 400 mm Table length: 400 mm Table width: 400 mm Max. workpiece length: 630 mm Max. workpiece width: 630 mm Max. workpiece height: 900 mm Max. workpiece diameter: 630 mm Max. workpiece size: Ø 630 × 900 mm Max. workpiece weight: 400 kg Pallet changing time: 9 s Max. spindle speed: 12,000 rpm Spindle drive power: 15/11 kW Spindle torque: 110 Nm Spindle bearing inner diameter: 80 mm Spindle type: SJ-2B4351TK Tool positions: 40 Max. tool diameter: 70 mm Max. tool diameter with free neighboring positions: 170 mm Max. tool length: 450 mm Max. tool weight: 8 kg Tool holder: MAS-BT40 MACHINE DETAILS Control system: MITSUBISHI MSX-853 IV Rated power: 38 kVA Total power consumption: 38 kVA Dimensions & Weight Dimensions (L x W x H): 2,720 x 4,224 x 2,513 mm Total weight: 7,600 kg Coolant tank capacity: 170 l High-pressure coolant: 15 bar Operating hours Iodpfezrl H Rox Abnetk Hours under power: 64,734 h Operating time: 31,113 h EQUIPMENT Chip conveyor Work area light 4th axis Cooling High-pressure cooling 2-pallet changer

Condition: new, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 16 mm, overall weight: 500 kg, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 200 mm, torque: 24 Nm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 50 rpm, power: 0.005 kW (0.01 HP), The CMA 3-axis controlled tapping center is designed for the post-processing of laser-cut sheet metal parts and complete processing of small parts and tubes, for example. The machine offers the following processing options: - Thread cutting - Drilling (standard / with chip breaking / hollow profile cycle) - countersinking - Flow drilling (with optimum feed curve) - reaming - Simple graphical programming - Import of 2D DXF or DWG files - Machine table according to System 28 (similar to Demmeler and Siegmund welding tables, among others) - Radial compensation of the tool by means of patented tool holder (accessory) - Tool probe for length measurement and as a breakage detector - Intuitive safety system using light barriers Itodpfjrbz T Nsx Abnjk Standard version: Automatic tool changer with 10 positions, mounted on the machine portal

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, The dismantling is scheduled for calendar week 35. Until then, the buyer can inspect the system while it is in operation in Lithuania. Fully automatic edge banding line with the following machines: HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) TECHNICAL DETAILS Edge banding machines HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ Workpiece width without edge, with workpiece thickness of 12–22 mm: min. 60 mm (depending on workpiece length) Workpiece width without edge, with workpiece thickness of 23–60 mm: min. 100 mm (depending on workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Iedoztazfjpfx Abnotk Edge material on roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Gap-free joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Gap-free processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Transport rollers on the infeed table Lateral conveyor belt on the infeed table Electropneumatically controlled transverse safety device on the infeed table Manually adjustable infeed safety device Set for small parts Integrated air cushion table Fixed stop on the left side at the infeed and outfeed of the transfer system cross conveyor Infeed roller track with conveyor belt and cross conveying Controlled cross conveyor at the infeed Outfeed roller track Controlled cross conveyor at the outfeed Electropneumatically controlled stop protection device Lateral transport belt Manually adjustable panel overhang