Tipper semitrailer

Kloos, Stahlhalbschalenmulde, 45 cbm

Condition: ready for operation (used), Year of construction: 2010, Large semi-automated Pace cutting system Polar 137 XT-Autotrim with pile lifter, jogging system with count scale, gripper transport system, rotary gripper, and delivery unit Year: 2010 Approx. 5.43 million cuts Workflow: The material to be cut is raised to an optimal working height using a loading lift, placed into the jogger by the operator, automatically jogged, and then transported via the Autotrans gripper system from behind the jogger to the rear table of the high-speed cutter and rotated. After cutting, the Transomat automatically stacks the layers onto a pallet, allowing continuous cutting operations. Polar Stack Lift LW 1200-4 Platform size: 80 x 126 mm Load capacity: 1200 kg Equipped with steplessly adjustable photoelectric sensors for automatic lifting and lowering. Jogger RAH-4 with air removal roller and unloading for rear-table feeding Working format up to 75 x 105 cm Unloading of the jogged cutting material occurs automatically to the rear into the STR stacking rack. The Autotrans gripper transport system then handles layer transport onto the rear table of the high-speed cutter. Sheet scale – Polar count scale Avery Weigh-Tronix For creating quantity-accurate cutting layers Gripper transport system POLAR Autoturn – clamp transporter for rear-table loading and rotary gripper Takes over the prepared cutting layer from the stack rack or buffer table Via air tables, which use air cushion for optimized material handling, the cut material is transported directly onto the rear table of the high-speed cutter and placed with precision. The cutting layer is held firmly by the grippers during transport, ensuring even pre-aligned layers remain precisely squared during movement. Cutting machine Polar 137 XT-AT with touch control And Autotrim function for automatic waste removal under the front table during cutting Iodexd U Sajpfx Ah Nsht - Lowerable side gauge left (required for rear-table loading); also allows handling of formats with a diagonal of...

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed Iodpfjiyya Ajx Ah Nsht 3x additional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Condition: used, The Horizon APC-T61 is a high-performance hydraulic guillotine designed for precision cutting, ideal for small and medium-sized printers and binderies. This machine is practically new, fully operational, and ready for immediate production. Key features of the APC-T61 include its ability to save programs to memory, an electronic digital display with an accuracy of 1/10 mm, and easy program initiation with a Zollstart Zoll button. The knife beam and hydraulic pressure drive ensure precise and efficient cutting. Technical specifications of the APC-T61 are as follows: Cutting length: 610 mm Batch depth: 620 mm Iedpfx Aew Irlgeh Nsht Pile height: 100 mm Power supply: 380V / 50Hz Power: 3 kW Weight: 700 kg The machine comes with a comprehensive set of accessories, including a spare knife, shaft, operating tools, tapping block, and manual. Currently in stock and located in Germany, the Horizon APC-T61 Hydraulic Guillotine is a reliable and efficient solution for your cutting needs. Format: 610 mm Equipment: Horizon APC-T61 Hydraulic guillotineThe machine is practically new, fully operational, ready for h-performance, precise hydraulic cutter ??? for small and medium-sized printers, bindery Control:Ability to save programs to memoryelectronic digital display with an accuracy of 1/10 mmstarting the program with the Zollstart Zoll buttonKnife beam and hydraulic pressure drivecutting linepre Technical data:Cutting length 610 mm 620 mm batch depth Pile height 100 mmPower supply 380V / 50Hz3 kW power Weight 700 kg The set includes: spare knife, shaft, operating tools, tapping block, manu

Condition: used, mileage: 84,287 km, power: 368 kW (500.34 HP), first registration: 12/2019, fuel type: diesel, overall weight: 28,000 kg, axle configuration: 3 axles, color: silver, gearing type: automatic, emission class: euro6, loading space length: 5,100 mm, loading space width: 2,500 mm, loading space height: 800 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN 28.500 TGS 3-way tipper + Fassi 395 crane 6x2 Suspension: Leaf/Air Wheelbase: 4.50 m FASSI Crane Type: F395 RA.2.26 XE - Dynamic (39.5 tonne-metre crane) Year: 2019 6x hydraulic extensions 5x hydraulic outriggers 5th + 6th control functions 1x remote control 1x hydraulic grab 3-way tipper Length: 5.10 m Width: 2.50 m Height: 0.80 m Hydr. foldable (rear) Equipment: - Engine brake - Digital tachograph Ijdoxml Nuspfx Ah Noht - Seat heating - 1x bed - Refrigerator compartment - Radio/media/navigation/telephone/Bluetooth/USB/AUX - Lift and steering axle - Reversing camera - Heated windscreen - Lane departure warning system - Sliding roof - Electric windows - Sun visor - Air/ABS power connection We are also happy to support you with financing/leasing through our partners. All information without guarantee. Subject to errors and prior sale.

Condition: used, mileage: 683,907 km, power: 353 kW (479.95 HP), first registration: 06/2010, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 01/2026, brakes: retarder, color: white, gearing type: mechanical, emission class: euro5, loading space length: 6,600 mm, Equipment: air conditioning, crane, MAN 26.480 6x2-2 LL Palfinger Crane PK 23002 Performance REMOTE CONTROL + FlyJib Total outreach approx. 21 meters Last crane inspection valid until 4 x hydraulic outriggers! * First registration: 06/2010 * ZF manual transmission * ZF intarder * Auxiliary heater * Lift-steer axle (3rd axle) * Reversing camera * 1 x sleeper bunk Iodpfx Aewyyykoh Neht * Trailer hitch (AHK) * Cool box * Air conditioning * DuoMatic air connection * Tyres approx. 80%

Condition: excellent (used), Year of construction: 2023, Hefter Systemform SF1500-Plus compact folder, year 2023. Max. format: SRA3. Speed up to 18,000/h. 6 folding types. Automatic setting. Paper 52–170 g/m² (parallel fold up to 230 g/m²). Pile feeder for max. 800 sheets. Delivery conveyor. Located in our stock. Immediately available. Very good condition. Ihjdoxvrx Ispfx Ah Net

Condition: used, Year of construction: 2002, Roundpilefeeder RD.2-78 1 station TD-78 6 pockets 2. station TD-66 4 pockets Delivery SBP-M 86.D Glueing device Rear -and front-mounted slitter shafts Ihjdpfxjud U D Ie Ah Not Gate-fold unit Available: at short term

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 120 M with automatic machine recognition Clean air extraction system with H3 approval Suction connection: 120 mm Nominal motor power: 1.5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow: 1,140 m³ / h Ihjdpehkztwjfx Ah Nst Nominal volume flow: 814 m³ / h Negative pressure: 2.180 Pa Filter area: 5,1 m² Chip collection volume: approx. 135 litres Dimensions (L x W x H) in mm: 1,178 x 650 x 1,972 Weight: approx. 121 kg Location: Ex stock 54634 Bitburg - immediately available -

Condition: used, mileage: 977,000 km, power: 294 kW (399.73 HP), first registration: 08/2012, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 05/2025, brakes: retarder, color: yellow, emission class: euro5, loading space length: 6,500 mm, loading space width: 2,500 mm, loading space height: 1,000 mm, Year of construction: 2012, Equipment: ABS, air conditioning, crane, navigation system, parking heater, Very well-maintained MAN TGS 26.400 construction materials truck with Atlas 220.2 loading crane and pallet tongs Special equipment: Trailer coupling: Rockinger 400 G 150 A, aerial car phone, work lights (2) on cab roof, exterior mirrors and wide-angle mirror electr. adjustable and heatable, wide-angle mirror with electr. maneuvering aid, battery 225 Ah, curb mirror right electr. adjustable and heatable, bolted bridge mounting bracket, rear axle differential lock, aluminum air reservoir, pressure sensor for air bags, ETA automatic fuse, cab: with air suspension, driver's seat comfort, air-sprung and heated, with lumbar support and shoulder adjustment, remote control central locking, flame-start system, transmission 12-speed - type: ZF 12 AS, Tipmatic, pneumatic transmission shift lock, high-load roll stabilization, automatic air conditioning, fuel tank: combi tank - 480 ltr. Diesel + 75 liters urea solution (AdBlue), Steering wheel with multifunction, LM rims 9.00x22.5 (ALCOA matt on 1st rear axle), LM rims 9.00x22.5 (ALCOA matt on 1st front axle), LM rims 9.00x22.5 (ALCOA matt on 2nd rear axle), heated air dryer, Eberspächer D4S auxiliary air heater, NAS/10C power take-off without flange, spare wheel LM rim 9.00x22.5 ALCOA matt, Retarder, Seat cover/upholstery: comfort quality, Exterior sun visor, Side window sunblind, Driver and passenger door, Socket for cab 12V and 24V, Fleet management system control module, Reinforced front axle shock absorbers, Preparation for engine start/stop system at frame end, Additional high beam/fog lights with cornering light Ijdpfxovm R Ruo Ah Njht Further equipment: Axle configuration: 6x2, Approach/front mirror, Trailer socket 24V / 7-pin, Trailer socket ABS, Anti-slip control (ASR), Audio system: MAN basic Line radio (radio / CD), MAN-Tronic on-board computer, MAN-Brakematic electronic braking system, EURO 5 engine, Cab: L, Suspension: leaf / air, Electric windows, Tinted windscreen, Generator 28 V 80 A, Mechanical lifting roof, Body/structure: Chassis, rocker arm - brake EVB, fuel filter heated, air intake raised, air compressor 1-cyl. 360 ccm, engine 10.5 ltr. - 294 kW diesel, trailing axle NO-08, liftable, spare wheel holder behind rear axle, disc brake rear axle, disc brake front axle, side guard, tinted side windows rear, sun protection roller blind for windscreen, spray mist reduction, stabilizer on one rear axle, stabilizer front axle, TGS, tinted door windows, underride guard rear, underride guard front, viscous fan, front axle VOK-09 cranked, central locking, gross vehicle weight 26.00 t Tire condition: front axle approx. 80% rear axle approx. 60% The vehicle can also be sold complete with trailer. The price of the trailer is 5.000,--¤ net For questions regarding the equipment please call. Subject to errors and prior sale!

Condition: new, power: 346 kW (470.43 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, loading space length: 6,600 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal number for customer inquiries: 1546 / IMMEDIATELY AVAILABLE ----Multiple units in stock! MAN TGX 26.470 construction material platform truck with PALFINGER PK 22002 EH or FASSI F235 loading crane, IMMEDIATELY AVAILABLE! PK 22002-EH – PALFINGER HIGH PERFORMANCE TRUCK-MOUNTED CRANE - Lifting moment: 205.0 kNm (20.9 mt) - Classification HC1 HD4/B3 according to EN12999 - Fast extension system with oil return and internal oil feed-through - Double knuckle with Power Link Plus 15° - Slewing mechanism with swing cylinders - Slewing range 400° - Electronic HPLS control unit (for two pressure ranges) - Individual outrigger control with unlockable check valves at the support cylinders - Spiral hose from base frame to main boom - Level indicator at both control stands - Available with 4-stage and 6-stage extension ex stock or Fassi F235 loading crane: * F235A.2. e-dynamic * Lifting capacity at 12.7 m: 1,345 kg or 17.1 m: 740 kg * Slewing range 400° * Double knuckle-boom system with PROLINK (overbending jib up to 15°) * Electronic overload cut-off system with FX500 * Fassi RCS radio remote control maxi – 6 functions with 3 joysticks (2-2-2) * Emergency stop and visual alarm (90% and 100%), including adjustable digital slewing limiter * FASSI stability control FSC including LMB II * Control unit for 2 auxiliary functions with 2 hose guides / e-dynamic * Available with 4-stage and 6-stage extension ex stock Superstructure: * Platform body: dimensions 6,600 x 2,480 x 1,000 mm * Sideboards: each side split once (2 drop-sides), with sideboard relief * Substructure: galvanized lattice frame * Perforated frame for optimal load securing * Toolbox Vehicle: * Flatbed platform with crane * Diesel engine MAN 02676 LFAI, 346 kW (470 HP), 2,400 Nm torque, Euro 6e * MAN TipMatic 12.26 DD automated gearbox with Retarder 35 * Retarder Eco, speed-dependent, multi-stage, energy efficient * MAN EVBec high performance engine brake, multi-stage * Protected disc brakes, suitable for off-road use * Drive 6x2-4 * Suspension type leaf/air (BL) * Main wheelbase 4,800 mm, wheelbase between rear and trailing axle 1,350 mm * Fuel tank volume 590 L, AdBlue tank volume 60 L * Trailing axle steerable and liftable * Trailer coupling RINGFEDER type 4040/G150B, 40 mm towing ring * GM cab: the spacious one (wide, long, medium height) * Mattress comfort bed, lower, 110 mm * Pull-out refrigerator and drawer * Driver comfort seat, air-sprung, with lumbar support and shoulder adjustment * Glass tilt roof, electric * LED lighting * MAN EasyControl operating panel, 4 functions, operable from outside with door open * MAN Media System Navigation Professional 12.3 inch * MAN Advanced sound system with subwoofer * Smartphone integration * MAN SmartSelect infotainment control with touchpad and direct access buttons * Lane departure warning LDW * Driver attention assist MAN AttentionGuard * Emergency brake assist EBA * Standard drivetrain warranty for the 3rd operational year up to 450,000 km, see maintenance certificate for details Isdpfx Ahsxnn Iio Noht * And much more Financing / hire purchase, as well as leasing / partial amortization leasing, is possible with our leasing partner. For further questions, our sales team is at your disposal. This is a non-binding offer. Subject to prior sale, errors, and changes.