Cooling device YORK YCSA 08 M+T (art.461

YORK YCSA 08 M+T

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: AC, cooling capacity: 56 kW (76.14 HP), type of cooling: water, input frequency: 50 Hz, heating capacity: 67 kW (91.09 HP), fuel type: gas, "SANYO" PANASONIC ECO G Gas heat pump air conditioner Model: SGP-E190J2GU2W Nissan K25 Engine Power source: 230 V AC, 1 Phase, 50 HZ Max electrical input: 1,16 kW, 5,4 A (Continuous) Unit protection: IP24 Cooling capacity: 56 kW Heating capacity: 67 kW Heat input (HS)(Cooling): 43,5 kW Dusdpfxsd Tiu Ee Afnol Heat input (HS)(Heating): 46 kW Refrigerant: R407C, 17 kg Design pressure high side: 30 bar Design pressure low side: 16 bar OUTDOOR USE ONLY! We have 4 pieces on Stock!

Year of construction: 2005, condition: ready for operation (used), There are two BOY 55M available, both year of construction 2005. Clamping force: 550kN, screw diameter: 38mm, stroke volume: 196cm³, injection pressure: 2000bar, platen dimensions: 565mm/540mm, tie bar distance: 360mm/335mm. Workpiece height min./max.: 250mm/650mm, opening stroke: 400mm, max. platen distance: 1050mm, ejector stroke: 80mm, max. mold weight: 600kg. Dimensions X/Y/Z: approx. 3300mm/1200mm/2100mm, weight: approx. 2300kg, operating hours: 29664h, control: Procan MD. Robot interface Euromap 12 included. Dedpjtyaypefx Afnjul

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Dujdpfx Afjiyya Aonol Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x additional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Condition: ready for operation (used), Year of construction: 2010, Large semi-automated Pace cutting system Polar 137 XT-Autotrim with pile lifter, jogging system with count scale, gripper transport system, rotary gripper, and delivery unit Year: 2010 Approx. 5.43 million cuts Workflow: The material to be cut is raised to an optimal working height using a loading lift, placed into the jogger by the operator, automatically jogged, and then transported via the Autotrans gripper system from behind the jogger to the rear table of the high-speed cutter and rotated. After cutting, the Transomat automatically stacks the layers onto a pallet, allowing continuous cutting operations. Polar Stack Lift LW 1200-4 Platform size: 80 x 126 mm Load capacity: 1200 kg Equipped with steplessly adjustable photoelectric sensors for automatic lifting and lowering. Jogger RAH-4 with air removal roller and unloading for rear-table feeding Working format up to 75 x 105 cm Dusdpjxd U Saefx Afnsl Unloading of the jogged cutting material occurs automatically to the rear into the STR stacking rack. The Autotrans gripper transport system then handles layer transport onto the rear table of the high-speed cutter. Sheet scale – Polar count scale Avery Weigh-Tronix For creating quantity-accurate cutting layers Gripper transport system POLAR Autoturn – clamp transporter for rear-table loading and rotary gripper Takes over the prepared cutting layer from the stack rack or buffer table Via air tables, which use air cushion for optimized material handling, the cut material is transported directly onto the rear table of the high-speed cutter and placed with precision. The cutting layer is held firmly by the grippers during transport, ensuring even pre-aligned layers remain precisely squared during movement. Cutting machine Polar 137 XT-AT with touch control And Autotrim function for automatic waste removal under the front table during cutting - Lowerable side gauge left (required for rear-table loading); also allows handling of formats with a diagonal of...

Condition: new, Year of construction: 2025, Efficient cooling systems with R290 – air-cooled, reliable, and environmentally friendly. Our models cover a performance range from 20 to 800 kW and offer flexible options with or without free cooling. Advantages: - Environmentally friendly R290 refrigerant with low global warming potential - Air-cooled, with integrated pump and tank - Options: with free cooling – use of outside air for additional cooling, reducing power consumption especially during cooler months - Scalable from 20 to 800 kW to suit your requirements - State-of-the-art control system Customised consulting, planning, and sizing Delivery time depends on configuration and equipment Djdpfx Asfqllwjfnsul Sustainable operation thanks to low CO2 emissions and reduced operating costs We are happy to advise you on the version best suited to your requirements.

Condition: used, The Horizon APC-T61 is a high-performance hydraulic guillotine designed for precision cutting, ideal for small and medium-sized printers and binderies. This machine is practically new, fully operational, and ready for immediate production. Key features of the APC-T61 include its ability to save programs to memory, an electronic digital display with an accuracy of 1/10 mm, and easy program initiation with a Zollstart Zoll button. The knife beam and hydraulic pressure drive ensure precise and efficient cutting. Technical specifications of the APC-T61 are as follows: Cutting length: 610 mm Batch depth: 620 mm Pile height: 100 mm Power supply: 380V / 50Hz Power: 3 kW Weight: 700 kg The machine comes with a comprehensive set of accessories, including a spare knife, shaft, operating tools, tapping block, and manual. Currently in stock and located in Germany, the Horizon APC-T61 Hydraulic Guillotine is a reliable and efficient solution for your cutting needs. Format: 610 mm Equipment: Duodpfxjw Irlgs Afnsl Horizon APC-T61 Hydraulic guillotineThe machine is practically new, fully operational, ready for h-performance, precise hydraulic cutter ??? for small and medium-sized printers, bindery Control:Ability to save programs to memoryelectronic digital display with an accuracy of 1/10 mmstarting the program with the Zollstart Zoll buttonKnife beam and hydraulic pressure drivecutting linepre Technical data:Cutting length 610 mm 620 mm batch depth Pile height 100 mmPower supply 380V / 50Hz3 kW power Weight 700 kg The set includes: spare knife, shaft, operating tools, tapping block, manu

Condition: ready for operation (used), Year of construction: 2019, Z-axis: servo-electric, movable transverse to the machine its longitudinal axis, stroke: 1000mm, max. speed: 2m/s, max. handling weight: 5kg (sum of gripper, parts and G-axis), repeat accuracy: +/- 0.1mm. C-axis: pneumatic rotary axis: rotation range: 0°/90°. B-axis: pneumatic, swivel 90° to reduce the stroke of the Z-axis. Stroke extension of the Z-axis: to 1000 mm (for the version with B-axis). G-axis (gripper): Pneumatic drive, stroke length: 50 mm, end positions manually adjustable. Documentation available. Duodpjtlucnefx Afnel

Condition: used, mileage: 84,287 km, power: 368 kW (500.34 HP), first registration: 12/2019, fuel type: diesel, overall weight: 28,000 kg, axle configuration: 3 axles, color: silver, gearing type: automatic, emission class: euro6, loading space length: 5,100 mm, loading space width: 2,500 mm, loading space height: 800 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN 28.500 TGS 3-way tipper + Fassi 395 crane 6x2 Suspension: Leaf/Air Wheelbase: 4.50 m FASSI Crane Type: F395 RA.2.26 XE - Dynamic (39.5 tonne-metre crane) Year: 2019 6x hydraulic extensions 5x hydraulic outriggers 5th + 6th control functions 1x remote control 1x hydraulic grab 3-way tipper Length: 5.10 m Width: 2.50 m Height: 0.80 m Hydr. foldable (rear) Equipment: - Engine brake - Digital tachograph - Seat heating - 1x bed - Refrigerator compartment - Radio/media/navigation/telephone/Bluetooth/USB/AUX - Lift and steering axle - Reversing camera - Heated windscreen - Lane departure warning system - Sliding roof - Electric windows - Sun visor - Air/ABS power connection We are also happy to support you with financing/leasing through our partners. Duedpoxml Nujfx Afnjl All information without guarantee. Subject to errors and prior sale.

Condition: used, mileage: 683,907 km, power: 353 kW (479.95 HP), first registration: 06/2010, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 01/2026, brakes: retarder, color: white, gearing type: mechanical, emission class: euro5, loading space length: 6,600 mm, Equipment: air conditioning, crane, MAN 26.480 6x2-2 LL Palfinger Crane PK 23002 Performance REMOTE CONTROL + FlyJib Total outreach approx. 21 meters Last crane inspection valid until 4 x hydraulic outriggers! * First registration: 06/2010 Dujdpfxowyyyko Afnjl * ZF manual transmission * ZF intarder * Auxiliary heater * Lift-steer axle (3rd axle) * Reversing camera * 1 x sleeper bunk * Trailer hitch (AHK) * Cool box * Air conditioning * DuoMatic air connection * Tyres approx. 80%

Condition: used, Year of construction: 2002, Roundpilefeeder RD.2-78 1 station TD-78 6 pockets 2. station TD-66 4 pockets Delivery SBP-M 86.D Glueing device Duedpfx Afoud U D Ijnsl Rear -and front-mounted slitter shafts Gate-fold unit Available: at short term