Agricultural machine

Kehrmaschine Saphir 181

Condition: excellent (used), Year of construction: 1999, Technical Data: Working length: 3050 mm Distance between uprights: 2690 mm Pressing force: 130 t CNC control: DELEM Adjustable backgauge Controlled axes: Z1 / Z2; X; R CNC-controlled crowning Installation height: 535 mm Stroke: 365 mm Throat depth: 410 mm Hydraulic tool clamping top and bottom Ram position measuring system with spring-back compensation via glass scales Program-controlled lower tool shifting (I-axis) for 2 positions Motor power: 12.5 kW Number of backgauge fingers: 2 Ijdpjw Tcncefx Akxstf CE mark Dimensions (L x W x H): approx. 3800 x 2350 x 3150 mm Weight: approx. 14 tonnes Condition: Good condition The seller is not liable for typing or data transmission errors. The machine's appearance, technical condition and wear correspond to its age; used machines are sold without any warranty.

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: Itsdpfx Akswp Rqfoxjf • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: used, Year of construction: 2004, Hydr. reversing Bale size 0.8 - 180 m / Ijdpfx Akjrxta Ejxetf

Condition: used, Year of construction: 2022, Plasma Cutting System Manufacturer: Swift Cut Model: Pro 3000 Year of manufacture: 2022 X/Y Travel: 3,000 x 1,500 mm Power source: Hypertherm Powermax65 SYNC Max. sheet thickness (mild steel): 16 mm Max. sheet thickness (stainless steel): 12 mm Max. sheet thickness (aluminium): 12 mm Itsdpfxsyazzbj Akxef Table length: 3,000 mm Working width: 1,500 mm Table width: 1,500 mm ä16426

Condition: excellent (used), CPM 2000 granulator, 90kW engine die diameter 410mm Iedswcdpnjpfx Akxetf We have several pieces

Condition: good (used), functionality: fully functional, power: 55 kW (74.78 HP), gearing type: hydrostat, fuel type: diesel, color: blue, overall weight: 5,900 kg, maximum load weight: 2,900 kg, lifting power: 2,900 kg/m, lifting height: 3,285 mm, axle configuration: 4x4, number of seats: 1, emission class: euro3, shovel volume: 1.15 m³, Year of construction: 2014, operating hours: 3,289 h, Equipment: all wheel drive, cabin, head guard, onboard computer, === MAIN SPECIFICATIONS === Year of manufacture: 2014 Operating hours: 3289 h Operating weight: 5,900 kg Max. tipping load: 4,140 kg Bucket capacity: 1.15 m³ Drive: Hydrostatic All-wheel drive: Yes Iedpfx Aksym Spvjxetf Differential lock: Yes (100% connectable) Quick coupler: Hydraulic Cabin: Closed Cabin heating: Yes Air conditioning: No Tyres: 405/70-24 Pneumatic – approx. 80% remaining Engine manufacturer: Deutz Engine power: 55 kW Emission standard: Stage V Hydraulic flow: 84 l/min CE certified: Yes === HIGHLIGHTS === • Compact and powerful wheel loader • All-wheel steering for excellent manoeuvrability • 100% differential lock • Hydraulic quick coupler system • Strong tipping load of 4,140 kg • Comfortable closed heated cabin • Reliable and efficient hydrostatic drive === CONDITION === Machine in very good working condition. Fully inspected and tested. Tyres approximately 80% remaining. Ready for immediate use. === LOCATION & PRICE === Located in Sittard, The Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). === DELIVERY === Crane loading available upon request. Flexible international transport solutions tailored to your destination. All logistics professionally arranged by Collé Rental & Sales. Well-maintained Kramer 1150 wheel loader (2014) equipped with a Deutz engine and hydrostatic drive. This compact yet powerful machine offers excellent manoeuvrability thanks to its all-wheel steering and high tipping load capacity. Ideal for construction, industrial and infrastructure applications. CE-certified and ready for immediate deployment.

Condition: new, With digital technology, the NEOPULSE 400 CW is a three-phase pulsed MIG / MAG generator for heavy industry. Mobile and equipped with a cooling unit and a high-performance unwinding system, the NEOPULSE 400 CW is ideal for tackling the most demanding applications. Intuitive and functional, its digital interface makes it possible to act on the welding parameters with ease. Itjdpfx Akomxkggjxef MULTIPROCESS WELDING MIG/MAG : - steel and stainless steel wire: Ø 0.6 to 1.6 mm - aluminum wire : Ø 0.8 to 1.6 mm - CuSi and CuAl wire : Ø 0.8 to 1.6 mm - Flux-cored wire: Ø 0.9 to 2.4 mm MMA DC / Pulsed: basic, rutile and cellulosic electrodes (up to Ø 6 mm). TIG DC CONTACT / PULSED. Gouging (up to Ø 6.5 mm).

Condition: used, Year of construction: 2019, CNC portal plasma cutting machine Manufacturer: Microstep Type: MasterCut Compact 4001.20Ptk Year of manufacture: 2019 CNC control Working area: 2 x 4 m Plasma rotator "MasterCut" with fully automatic support for weld seam preparation 1 plasma torch with Kjellberg HiFocus 280i power source Filter unit TEKA Ref. ä16426 Iedpoxnmbnefx Akxjtf

Condition: used, mileage: 484,000 km, power: 353 kW (479.95 HP), first registration: 10/2010, fuel type: diesel, overall weight: 26,000 kg, brakes: retarder, gearing type: automatic, emission class: euro5, Equipment: crane, soot filter, Crane: ----- Retarder, air conditioning, trailer coupling, quick-change system. Tipper with 2-side discharge / fifth-wheel coupling with crane / fifth-wheel with crane and platform – a custom-built vehicle for companies requiring versatility. Wohlgenant two-sided tipper with boardmatic. Hiab crane 2011. Itsdpfx Akex Dzpfsxjf Suspension: Leaf-air

Condition: new, functionality: fully functional, Year of construction: 2022, working width: 5,000 mm, Boom mower for tractors with a power output from 33 kW (45 hp), category II three-point linkage, and a minimum weight of 2,100 kg. Driven via a PTO shaft with 540 rpm. - Maximum horizontal reach: 5.00 m - Independent hydraulic system (46 l/min, 210 bar) - Drive shaft - Hydraulic collision protection - Hydraulic swing arm - Float position for swing arm - Float position for mowing rotor - Stabilization kit for three-point linkage - Bowden cable control Flail rotor 1000 - Central mounting Itodpfx Akoxlf Hwoxef - Direct drive - Working width: 1.00 m - Weight approx. 140 kg