Spacer bar bending machine

Lisec BSV-45A

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 942, total length: 9,170 mm, total width: 1,635 mm, total height: 3,100 mm, overall weight: 4,140 kg, input current: 44 A, input frequency: 50 Hz, type of input current: three-phase, input voltage: 400 V, power: 21 kW (28.55 HP), workpiece weight (max.): 800 kg, pressure: 7 bar, Lattuada TL10 AV C straight line edger mitring 0-45°, cerium. Refurbished at our warehouse in Belgium. Tested and ready to go. Iedpfxow U Nzro Abnetk

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input frequency: 50 Hz, input voltage: 400 V, pressure: 6 bar, LiSEC, KSR-25, Right – Left, year 2010 Vertical Glass Edge Seaming Machine, h=2,50 m Vertical compact grinding machine for the seaming of glass sheets on all four sides in a fully automatic cycle. Inspection during production is possible by appointment. In very good working condition. Available: March / April 2025. Itodjv Eguyepfx Abnsk

Condition: excellent (used), Year of construction: 2009, Vertical glass drilling machine SCHRAML topDRILL 130 NC Year of production: 2009 Maximum working height: 1300 mm NC controlled Very good and clean condition Surplus drilling/countersink bits included Ijdpfx Asyfrvyobnetk As is Available immediately

Condition: ready for operation (used), Technical specifications of Dixi 60 AUTOMAT baler Filling opening (W x H): 1550 x 1000 mm Drive power: 31.5 kW Pressing force: 60 t Bale weight (depending on material): 350–600 kg Bale dimensions (W x H x D, adjustable): 1100 x 800 x 300–1600 mm Pressing/cycle time: 13/24 s Machine weight: 7000 kg Ijdov Amw Nopfx Abnetk

Condition: good (used), • Facet grinding machine • Year of manufacture 1990 • Comes from ongoing production • More information on request Isdpfxevxthto Abnjtk

Year of construction: 2024, condition: new, Trolley for carriage and storage of profiles in vertical position COMALL CARR 300 Q, new Technical specifications: - 10 compartments with working size 128 mm - Contact surfaces coated with non-scratch and shock-proof plastic material - 4 wheels Ø 125 mm, 2 of them with locking device Itsdpfx Asf Nk H Hobnjk - Arms adjustable in 5 different positions - Rubber-coated supporting table - Loading: 650 Kg

Condition: used, Year of construction: 2007, SINGLE SHAFT SHREDDER WEIMA MODEL WLK15 Itodjtqdxfjpfx Abnsk MAIN MOTOR 90KW ROTOR KNIVES SIZE 50X50 (NEW KNIVES) ROTOR LENGTH 1500MM ROTOR DIAMETER 370MM THE MACHINE IS 100% FUNCTIONAL READY TO WORK

Condition: good (used), Sanding machine for straight edges; for sanding and fine polishing straight edges, miters and phases Data: - Glass thickness 3-25 mm - Min. dimensions: 80 x 120 mm - Max. Dimensions: 3 x 3 meters - Mitres 0-60° - Power: 15kW - Dimensions: Length 6.5 meters Itedpfxsu U H H As Abnek - Width with water tray 1.6 meters - Height 2.5 m meter - Feed speed: 0.4 - 4.2 m/min. - Weight: 2600 kg Price on request

Condition: used, Technical details: length: 750 mm height: 800 mm welding current: 120 machine weight ab.: 180 kg dimensions L x W x H: Schweißgerät: 0,75 x 0,52 x 0,8 m dimensions L x W x H: Kompressor: 1,2 x 0,5 x 0,9 m Plasma cutter with piston compressor optional cutting device: make Jäckle, year: 2005 - cutting power 30 kVA - TIG / E-welding - cooling type F - with torch package 6,0 meter - with ground cable 12,0 meter Itedsu R A Dlepfx Abnsk OPTIONAL: piston compressor: make Schneider type Universal 650-60D, year: 1993 - filling capacity 500 liters/min. - volume flow 616 liters/min. - Compressor pressure 10 bar - power max. 4 kW - incl. compressed air hose approx. 4 meters - mobile on two wheels *

Condition: used, Year of construction: 2007, spindle diameter: 45 mm, number of spindles: 6, No. 3176 Automatic planer and moulder WEINIG Hydromat 1000 Used, year of construction 2007, machine already dismantled 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 - 60 m/min Working width 80 - 150 mm Working height 23 - 65 mm Finished slat widths 4 - 15 mm Max. number of slats 16 pieces Slat lengths 400 - 4000 mm 1st spindle horizontal at the bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool flight circle 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm 3. spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm Pressure shoe in front of the spindle, swiveling away, pneumatic roller contact pressure 4. spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 5. horizontal top spindle as saw spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment travel reduced to 25 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 6. horizontal spindle at the bottom as saw spindle Brake motor 30 kW, 5000 rpm Axial adjustment travel reduced to 25 mm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm All moulder spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of the feed rollers compared to the left-hand spindle, axial 35 mm Shorter roller distance compared to the right-hand spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in the table, lateral pressure roller Automatic waxilite pump / lubricant pump Machine with 4-roller extension, pendulum shafts extended to 200 mm 2 driven, toothed rollers in the outfeed table 2 driven, toothed rollers in the machine table Pressure beam before and after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electrical height adjustment of the upper spindles and the feed Sale on behalf of customer, ex location near 39100 Bolzano (Italy), without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Itjdpfx Asu Agh Sobnok Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location