MOULDER MECHANISATION INFEED AND OUTFEED

LINARES NOT ALMAB IF-100 & OF-100 NOT WEINIG

Condition: used, Year of construction: 2005, machine/vehicle number: M272, Used Filling Monoblock GAI 2405 1500 bph This Monoblock offers, therefore, a highly specialized solution for bottling still wine in glass containers, designed to meet the needs of technical precision and production continuity for industry operators. GAI manufactured this machine in 2005, and it achieves a filling speed of 1500 bottles per hour, which ensures, in turn, high efficiency for medium-capacity production lines.Filling Specifications of the Used filling monoblock GAI The filling system of the GAI 2405 monoblock, meanwhile, delivers high precision in handling the product, maintaining consistent operating conditions. This model, in particular, uses 12 gravity or light depression filling valves, which effectively prevent turbulence or alteration of the still wine during processing. The filling valves, consequently, stay in a fixed position, reducing the risk of contamination or leaks.Rinsing Section The Used Filling Monoblock GAI 2405 1500 bph rinsing system includes 12 grippers that perform a cleaning treatment for each bottle. The system, thus, completes rinsing in a single phase, which removes any residual particles inside the containers before filling. This single-treatment configuration, additionally, optimizes processing time and improves overall speed without compromising quality.Capping Features The capping section of this model of Used filling monoblock GAI supports straight corks and includes one head for cork insertion, which enables the production of still wine in formats of 0.75 L, 1.0 L, and 1.5 L. This head is specifically designed to drive the corks into a flush-fitting position. This feature of operating with straight corks, as a result, ensures adherence to the traditional characteristics of the final product and, in turn, meets specific market demands.Design and Structure The Monoblock features a design that ensures long operational life and easy maintenance. Operators can access each component for cleaning and inspection, allowing for safe and efficient management of the machine. Moreover, the integration of rinsing, filling, and capping sections into a single unit reduces the machine’s footprint, which, therefore, optimizes space in the facility.Production Cycle of the Used filling monoblock GAI This monoblock, likewise, maintains a stable production cycle, limiting fluctuations in temperature and pressure inside the bottles by optimizing control over filling conditions. The Used Filling Monoblock GAI 2405 1500 bph, as a result, synchronizes each stage of the process, minimizing waiting times and maximizing efficiency.Compatibility and Versatility The Used Filling Monoblock GAI 2405 1500 bph adapts perfectly to glass bottle production in various formats, with a capacity range from 0.75 L to 1.5 L. This versatility, in conclusion, makes the machine ideal for medium-volume bottling lines, thus optimizing the production process while, indeed, maintaining high-quality standards. Iodovgvcvopfx Ag Isib

Condition: used, Year of construction: 2018, Overview  This glass bottle filler and capper was manufactured in 2018 by the Italian company GAI. The MLE 661 Bier model is a compact and precise filling monoblock designed for small to medium-sized breweries and beverage producers. It features Pick & Place technology for pilfer-proof aluminum screw caps (30x20 mm) and an electronic fill height adjustment system for easy format changes. With a capacity of up to 900 bottles per hour, the unit is suitable for bottles ranging from 0.25 L to 1.0 L. The machine is in very good condition and ready for operation. Technical data Filling system: Isobaric (for beer and other carbonated beverages) Capacity: 900 bottles/hour Bottle formats: 0.25 L – 1.0 L Closure type: Pilfer-proof aluminum screw caps (30x20 mm), Pick & Place system Electronic fill height adjustment Stainless steel construction Ijdjxn A R Eepfx Ag Ijib

Condition: new, Year of construction: 2026, High-quality construction Drive roller is crowned (this ensures the grinding belt is automatically centered on the roller) and fully vulcanized for maximum service life and optimal smoothness Tool-free, and thus fast and uncomplicated, belt change Continuously adjustable height for optimal setup of the belt grinder for the user Freely adjustable metal work stop for optimal and safe guidance of workpieces when using the large flat grinding area Belt speed is optimally engineered to minimize risk of workpiece burning during processing Models with extraction are equipped with robust and flexible extraction hoses Motor protection switch with CEE plug connection including phase inverter Iisdebb R N Iopfx Ag Iob 5-year warranty on the motor 1-year warranty on the belt grinder Belt length: 2000 mm Belt width: 75 mm Flat grinding area: 600 mm Belt speed: 15/30 m/s Colour: RAL 9007 Three-phase motor 400 V: 3.0/3.75 kW Extraction capacity: approx. 630 m³/h Extraction motor: 0.37 kW Machine dimensions (W x D x H): 1100 x 550 x 1035 mm Machine dimensions (with extraction system) (W x D x H): 800 x 600 x 1450 mm Weight: 105 kg DELIVERY: FREE SHIPPING (within Germany) CAN’T FIND THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT SERVICE PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK US FOR A QUOTE!

Condition: used, Year of construction: 2000, machine/vehicle number: SO126, Used HDPE Extrusion Blow Molding Machine for 10 L – 300 bph – Overview Second-hand Uniloy Milacron HSM10/D extrusion blow molding machine designed for producing up to 10 L HDPE containers. With a single-parison head and robust clamp, this EBM unit is ideal for industrial packaging and beverage production auxiliaries (e.g., water canisters, edible oils) and can be integrated within a used bottling line. Documentation and manuals are available. Reference number: SO126. Technical Specifications & Performance Data Main data Make/Model: Uniloy Milacron HSM10/D Year: 2000 Technology: Extrusion Blow Molding (EBM), single parison Material: HDPE Number of cavities: 1 Max container volume: 10 L Indicative output: up to about 300 bph on 10 L (application-dependent) Manuals: included Ref. no.: SO126 Extruder Screw diameter: 100 mm; L/D 24 HDPE screw speed: 0–70 rpm Plasticizing capacity (HDPE): approx. 300 kg/h Main extruder motor: 89 kW Heating zones: 6; barrel heating power: 31.4 kW Motor cooling power: 0.58 kW; barrel cooling power: 1 kW Parison head Type: PE 1/200, single parison Max die diameter: 200 mm Head heating power: 14.2 kW Parison thickness control: hydraulic (wall-thickness programming) Clamp & blow unit Clamp force: 200 kN Max mould size: 650 × 500 mm (H) Mould thickness: 2 × 150 mm Mould opening stroke: 300 mm Horizontal carriage stroke: 660 mm Blow pin stroke: 240 ± 5 mm Blow pin thrust at 50 bar: 320 kg Electrical Installed power: 156 kW (average consumption ~104 kW) Supply: 400 V, 50 Hz, 318 A, 3 + N Hydraulic system Reservoir capacity: 400 l Pump flow (1470 rpm): 123 l/min Max pressure (main circuit): 190 bar Main hydraulic motor: 37 kW; oil cooling motor: 1.5 kW Pneumatics Operating pressure (general): 6–8 bar; air use: 2000–2500 Nl/min Post-cooling pressure: 6–8 bar; air use: 1000–1500 Nl/min Cooling water Mould circuit: 8–12 °C; flow 15 m³/h Extruder & hydraulic oil: 10–24 °C; flow 4 m³/h Dimensions & weights Approx. machine size (L × W × H): 7600 × 7700 × 3900 mm Blow unit weight: 7600 kg; Extrusion group weight: 6400 kg Noise level at operator: < 85 dB(A) Advanced Automation & Control Systems Hydraulic wall-thickness programming for precise parison control, improving weight distribution and top-load performance on 10 L containers. Dedicated Uniloy command and control software (version code available in manuals) with operator interface for setpoint management and diagnostics. Integrated temperature control across six extruder zones and heated head for stable processing at up to 300 °C transformation temperature. Interlocked guarding and emergency stops for safe operation. Production Line Integration Capabilities This second-hand extrusion blow molder is integration-ready for downstream equipment typical of a used bottling line and industrial packaging systems: Iisdpeyhbt Hefx Ag Ieb Conveyor...

Year of construction: 2011, condition: good (used), The ILPRA Foodpack Traysealer, model 1403 VG, is a versatile in-line automatic packaging machine designed for sealing food products in trays. It can handle a wide range of tray sizes and types, making it suitable for various food products including fresh, cooked, and frozen foods. The traysealer is equipped with an automatic film feeding system, which improves efficiency and reduces manual intervention. The machine is equipped with 12” colour touch screen, adjustable in the most favourable position for the operator, simple and friendly-use software. Machine is capable of packing in vacuum and MAP Available with two moulds: 1. 6 x 250 x 170mm 2. 170 x 155mm Depth, up to 80mm Iisdpfxjtr Dtio Ag Isb Technical data: Power: 10kW Pneumatic feeding: 30lt/cycle – 6 bar Protection: IP65 Total dimensions: L: 7500 x W: 1400 x H: 2200mm (2500mm with open covers) Weight: approx 2500kg

Year of construction: 2013, condition: used, functionality: fully functional, Tomra Halo 1500 (Titan 60") for sale. The machine is currently in use in a potatoe packhouse in Germany and will become available June/July 2026. Prior delivery, the machine will undergo a service and througough cleaning in our workshop, including the replacement of broken fingers, infeed conveyor as well as the hedgehog band. Iisdpfx Asx A Ebpjg Ieb

Condition: used, Year of construction: 2002, Operating terminal / Iiedpfsufxr Eex Ag Ieb

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Max feeding speed 200 m/min • Electronic speed control 30 - 200 m/min • Max working width 250 mm • Minimum working height 12 mm • Max working height 100 mm • Spindle speed 5000 & 6000 r.p.m • Spindle diameter 50 mm. Iijdsyzdtkepfx Ag Iob For a separate fee, it can be dismantled and loaded onto a transport vehicle.

Condition: used, Year of construction: 2020, machine/vehicle number: M305, Used Rotary Filler–Capper Monoblock 24/8 for PET and HDPE Bottles – Overview This second-hand rotary monoblock combines a 24-head volumetric piston filler with an 8-head pick-and-place spindle capper, engineered for PET and HDPE bottles up to 1 L. Designed for industrial packaging environments, it is a robust component for a used bottling line handling non-pressurized products such as detergents and liquid soap. The machine features a painted iron frame, stainless steel panels, and a fully enclosed protective hood with safety devices, offering reliable performance in high-throughput operations. CE marking and complete documentation support integration within beverage production and home & personal care lines where non-isobaric, non-aseptic filling is required. Technical Specifications & Performance Data Configuration: Rotary filler–capper monoblock (24/8) Container materials: PET, HDPE Product types: Liquid detergents, liquid soap (suitable for non-carbonated, non-aseptic applications) Filling technology: Volumetric piston filling No. of filling valves: 24 Nozzle type: Mobile nozzles Max fill volume: up to 1 L Capper: 8-head pick-and-place pneumatic spindle capper Cap type: Plastic screw caps (one cap size currently tooled) Machine rotation: Clockwise Nominal speed: up to 5,000 bottles/hour (depending on product, bottle, and closure) Isobaric: No (non-pressurized filling) Aseptic: No Integrated rinser: Not included Filling Section Bottle infeed screw Central product tank with magnetic float switches 24 pneumatic cylinders, upper plates, lower plates Internal plates with stainless-steel/Viton sealing Opening/closing valves per station Capping Section 8 pneumatic capping heads with spindle screwing system Pick-and-place cap transfer Vibratory cap bowl (one cap size) Cap cup and cap chute (one cap size) Automatic cap elevator Mechanical & Structural Frame: Painted iron External panels: Stainless steel Protective hood: Enclosed with doors and safety devices Isdpfxjyhb R Sj Ag Ijib Advanced Automation & Control Systems Pneumatic control panel for filler and capper actuation Electrical panel with CE-compliant components Wiring diagram included for streamlined commissioning Magnetic level control in product tank for stable filling Production Line Integration Capabilities This monoblock integrates seamlessly into second-hand used bottling line configurations for industrial packaging and beverage production of still, non-pressurized liquids. Its clockwise carousel rotation, bottle infeed screw, and cap-handling system allow straightforward connection with upstream conveyors, depalletizers, blow molding machines, and downstream labellers, inspection systems, and secondary packaging. Upstream compatibility: Blow molding machine, bottle unscrambler/depalletizer, conveyors Downstream compatibility: Labeller, inspection/quality control, packer/shrink-wrapper, palletizer Changeover scope: Supplied with 1 bottle format and 1 cap format; additional formats can be engineered on request Machine Condition &...

Condition: used, Board packer Almab Board feed hills Board pack feed conveyors Iedpfx Asymbpfjg Ijib Board pack output conveyors