Vertical Machining Centre

Leadwell V-40

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 860 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, nominal power (apparent): 30 kVA, torque: 151 Nm, controller manufacturer: Fanuc, controller model: Fanuc 0i MD, workpiece diameter (max.): 630 mm, workpiece weight (max.): 200 kg, total height: 2,721 mm, total length: 3,420 mm, total width: 2,200 mm, table load: 200 kg, rotary table diameter: 400 mm, overall weight: 6,800 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 6,532 h, coolant supply: 20 bar, distance table center to spindle nose: 438 mm, spindle motor power: 15 W, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 250 mm, tool diameter: 110 mm, tool weight: 7,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a Leadwell V-40L 5AX CNC machine (2011). The machine is in perfect working condition and currently under power. Machine information: Year: 2011 Operating hours: 6,532h Power-on hours: 18,398h Controller: Fanuc 0i-MD Travel (XYZ): X 850mm / Y 630mm / Z 610mm (spindle nose to rotary axis, max. 438mm horizontal) Cpodpfxoyrh Acs Aa Ejw Rapid traverse: 36m/min (all axes) Rotary table: 400mm Max. load: 200kg Max. diameter: 630mm Spindle power: 15kW (S1) Spindle speed: 12,000 rpm Spindle taper: SK40 Magazine capacity: 30 positions 3D probe: Renishaw OMP60 Oil mist separator: Losma Chip conveyor: 1x chain conveyor, 2x screw conveyors Internal coolant: 20 bar Zero-point clamping system: Brand - LANG, 96mm Inspection possible in Maribor, Slovenia. For more videos (spindle test up to 12,000 rpm, tool change) please contact us.

Condition: ready for operation (used), Year of construction: 1991, A Dornier weaving machine is available. Working width: 3300mm. Documentation available. Including heald frames. Without prewinder. On-site inspection is possible. Csdjxl Un Repfx Aa Eepw

Condition: excellent (used), Year of construction: 2011, Siemens Sinumerik 828D control with ShopMill Travel paths X/Y/Z: 1020 x 635 x 610 mm Spindle speed: 10,000 min-1 Cjdpfx Aajvtcyue Ejpw Tool magazine for 24 tools SK 40 IKZ Chip conveyor Measuring probe

Condition: excellent (used), Year of construction: 1967, Equippment: 1 Grip feeder system right hand side 1 Eccentricpress 90 kN 2 Narrow slide units 3 Standard slide units Cpjdpfx Asl D N Hvea Esw Working range: wire diameter range: 0,5 - 3,5 mm strip metal width: max. 32 mm feeding length: max. 170 mm output: max 250/min

Condition: used, X Axis 30.0 in 762 mm Y Axis 16.0 in 406 mm Cedpfx Aaoiypzdj Eepw Z Axis 16.0 in 406 mm Read for inspect Ready for delivery

Year of construction: 1993, condition: good (used), machine/vehicle number: 03.2370, Arthur Klink - internal broaching machine (WAG 748) machine type: internal vertical hydraulic broaching machine manufacturer: Arthur Klink type: RISZ 10 x 1000 built in: 1993 stroke: 1000mm pulling force: 10.000KG working stations: 3 PCs drive: hydraulic system equipment: coolant system, magnetic chip conveyer Cpsdpfx Ajcc D Ddoa Ejw remark: machine under power in stock the machine has an automatic workpiece loading system for 2 workpieces, ideal useable for high production Optional accessories available on request: tools, workpiece holder Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,089 h, stroke length: 300 mm, number of axes: 6, travel distance X-axis: 600 mm, overall weight: 6,400 kg, total height: 2,810 mm, travel distance Y-axis: 300 mm, pressing force: 102 t, product length (max.): 4,175 mm, This servo-electric SAFAN E-Brake 100-3100 press brake was manufactured in 2021. It offers a pressing force of 1000 kN and a bending length of 3060 mm. The machine is equipped with a CNC-controlled backgauge with X, R, Z1, and Z2 axes. If you are looking for high-quality bending performance, consider the SAFAN E-Brake 100-3100 that we have for sale. Contact us for more information • Throat depth: 590 mm • Control system: CNC – EC 20 • Upper beam stop time: < 92 ms • Safety distance (light curtain): ≥ 185 mm • Electrical supply: 3 × 400 V / 50–60 Hz / N / PE • Connected load: Max. 11 kW Additional equipment • Tools visible in the photos are not included but can be sold with the machine for an additional fee. Cpodpfx Ajx D Eanoa Esw Technical Specification Bending Length 3060 mm Dimensions Machine Depth 2140 mm

Condition: as good as new (ex-display), Year of construction: 2025, working width: 1,100 mm, sheet thickness (max.): 100 mm, The 32 RB series offers the solution for manufacturers delivering premium-quality products. This top quality is achieved by a multi-rotating brush unit with four abrasive lamella brushes, which evenly deburr and perfectly round the edges of the metal. Multi-directional rotary brush deburring machine (RB) for consistent deburring and finishing of flat sheet metal parts. All-around processing in a single pass, providing the part's surface with a non-directional finish. Equipped with one (or more) abrasive belt units (W) for pre-deburring and final finishing. - Abrasive belt unit Csdexw Ikcjpfx Aa Eopw - Rotary brush unit (self-calibrating) - Abrasive belt unit

Condition: good (used), functionality: fully functional, Year of construction: 2018, operating hours: 7,238 h, Technical Data Press Force: 360 kN Bending Length: 1020 mm Useful Installation Height: 295 mm Clear Column Distance: 932 mm Throat Depth: 150 mm Working Height¹: 1150 mm Backgauge Axis Travel Values Y-axis Stroke: 120 mm X-axis Travel: 235 mm (max. backgauge area) X-direction: 500 mm R-axis Travel: 75 mm Control Basic Configuration: Windows XPe, PC-based control, Pentium M 1.1 GHz, 15" Connection Values Electrical Connection approx.: 6 kVA Dimensions and Weights Required Floor Space (length × width): 1805 × 1330 mm Height: 2380 mm Weight: 2600 kg Standard Equipment of the TruBend 7036 Machine Stable Machine Frame: Welded construction, stress-relieved heat-treated for both standing and seated operation, includes two side columns, table, and crossbeam. Press Beam: Stress-relieved heat-treated, deformation-optimized. Upper Drive: Highly dynamic, electromechanical direct drive (torque motor), max. working speed of 25 mm/s (depending on selected die width and operating cycle). Inductive Length Measuring System with Temperature Compensation Control Cabinet Air Conditioning Ergonomic Machine Design Backgauge System 3-Axis Rear Backgauge System (one gauge finger): Highly dynamic, safety 3-axis rear backgauge system. Rack-and-pinion drive, CNC-controlled X, R, and Z axes freely programmable, providing a highly adjustable gauging depth and height for maximum precision. Fiberglass gauge finger with hardened metal stop. Tool Clamping Upper Tool Clamping: Enables quick and precise tool change—vertical and horizontal; fixed, self-centering. Lower Tool Clamping: Individual V-dies are placed on a special plate. Clamping: by hand, hardened clamping bar and retainer bar. Safety Safety Devices: Safety ensured by emergency stop push button, 2-button foot pedal for both standing and seated operations, laterally sliding protective doors, as well as rear and side safety guards. The side safety guards are made of transparent, impact-resistant plastic. Control TRUMPF TASC 6000: The TRUMPF TASC6000 control system is based on Windows XPe OS, with 1.1 GHz Pentium M and 15" touchscreen, USB interface, and 1 GB RAM. Optional Equipment Levels Backgauge System 6-Axis Rear Backgauge System (2 gauge fingers) Tool Clamping Tool clamping for AMADA US-Style upper tools (manual) Cpjdpsyfxfnefx Aa Esw Safety BendGuard (with block laser): Optoelectronic safety device enabling fast and safe bending. Permitted press beam speed in foot mode: 220 mm/s Control Graphical Workplace Programming

Condition: good (used), functionality: fully functional, Year of construction: 2008, Expected in approx. 2 months, used 4-meter CNC press brake from Safan Model: H Brake 170 4100 Capacity: 4100 x 170 tons TS1 CNC control Y1, Y2, X, R, Z1 and Z2 CNC controlled Csdeycv Uujpfx Aa Espw CNC crowning Wila hydraulic upper clamping 1 set of tooling