Moulder

LEADERMAC THUNDERMAC 923T NOT WEINIG

Condition: reconditioned (used), Leadermac Thundermac 923T Spindles: 9 x 50mm x 6000 rpm Bottom (22 kW) - Right (15 kW) - Left (15 kW) - Right (15 kW) - Left (15 kW) - Top (22 kW) - Bottom (22 kW), Top (22 kW) - Bottom (22 kW). Working width: 250 mm, height: 160 mm. Max feed speed 100m/min (Possible to increase to 150m/min) Straight jointers. Profile jointers. Connection: 380 V / / 50 Hz 400 amps. Full Documentation included. Rjdpfxjyl Rmdj Acdjcb

Year of construction: 1990, condition: reconditioned (used), 4-sided planer unimat U23, 7 heads 4-sided Weinig 7-head planer, 7 universal arrangement: horizontal, lower vertical, right, left, vertical, right, vertical, upper horizontal, lower horizontal, and the last universal. The drive is realized by means of cardans. The drive is secured with Rotax clutches. Pressure of the element using pneumatics. Feed smoothly regulated by an inverter. Machine feed 0-42 m/min. 2.5 kW and 7.5 kW engines. Grinding table and a new one. Additionally, new wiring and new electrics. The machine has been completely renovated. Warranty . Rodpfx Acepqxnxodecb

Condition: used, Year of construction: 2021, Number of spindles 5 St. Working width 250 mm Working height 160 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. control K2 Basic 7"-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm, spindle 4.5 to 8,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carrier motor-controlled - Additional motor-controlled positioning: right spindle radial and axial left spindle axial - working width 250 mm TECHNICAL DATA ----- Working width (perimeter of tools 163 mm) 15 - 230 mm Working height(perimeter of tools 163 mm) 10 - 150 mm (perimeter of tools 123 mm) 10 - 160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm The processing of the work pieces is depending on the following operating parameters: material, wood moisture, tools, diameter of the chip removal and feed speed. If necessary adjustments to the operating parameter have to be done. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 250 mm Usabale length for tools Spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 125 - 160 mm Reference cutter Diameter difference 20 - 25mm to the cutterhead Connecting piece D = 125 mm Quick action lock nut Pro-Lock 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Adjustable table plate to tool radius Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Standard profile depth 20 mm Adjustable table plate to tool radius Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock Rsdswgwmnopfx Acdscb 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Pressure shoe pneumatically, via linear guides dynamically adjustable Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle lenght minus approx. 6 mm Drive, frequency-controlled...

Condition: good (used), Year of construction: 1978, WACO HM200 UNIVERSAL, Planer-Moulder 10 spindle machine Year 9/1979 S/N 31469.708 Hydraulic feeded powerful spindle moulder. Feeding speed 0-50m/ min counter bearings on all horizontal spindles. 1. / 5. / 8./10. spindles equipped with jointer Infeeding table 200 cm Technical describtion: working capacity 200x100mm (width x hight) Spindle configuration: 1. Spindle Bottom 7,5Kw (10Hp) 2. Spindle Right 7,5kw (10HP) 3. Spindle Left kw (15HP) 4. Spindle Top, 7,5kW 5. Spindle Top, 7,5 kW 6. Spindle Right 7,5kw (10HP) Rcjdpfx Aceiz Tzxedeb 7. Spindle Left kw (15HP) 8. Spindle Top, 7,5 kW 9. Spindel Bottom, 7,5 kW 10.Spindle Bottom 10 kW Bottom spindle max tool diameter 160mm, work length 210mm Side spindles (right / left) max tool diameter 200mm, work length 110mm Top spindles max tool diameter 225mm, work length 210mm Spindle diameter 45mm Pneumatic pressure rolls ?? L x W x H = Weight 10 t

Year of construction: 1995, condition: ready for operation (used), For sell we have whole line. System TM Bison loading machine Weinig Hydromat H 22 B year 1989 System TM Angus unloading 450 - 2500mm lenght 20 - 80 mm height Rcedjtqdfispfx Acdjb 45 - 160 mm width

Condition: like new (used), chain width: 210 mm, Conveyor chain Width 210 mm 59 links Interholz RAIMANN Rcedpfsqwdvgex Acdeb Freiburg Weinig

Condition: good (used), Year of construction: 1982, WEINIG Four side planer, 5 heads PM 17 machine no. 1329-2356 year of manufacture: 1982 Rcsdpfx Asicbhvecdeb planning width 170 mm planning height 120 mm 5 spindles: max. tool length 180 mm, 130 mm infeed table length 2000 mm with planer heads 6 spindles arrangement: 1 bottom 4 kW 2. right 3 kW 3. left 5,5 kW 4. top 5,5 kW 5. bottom 4 kW / universal spindle diameter approx. 35 mm infeed speed 6,5 - 49 m/min. manual lubricant pump Incl. 5 tools for all heads dimension 4500 mm x 1300 mm x H 1500 mm Weight appr. 3800 kg technical specification under subject of correction

Condition: like new (used), functionality: fully functional, planing height: 190 mm, spindle diameter: 50 mm, planing width: 250 mm, overall weight: 10,000 kg, Weinig Hydromat H25N four-sided planer with 100 m/min feeder - German production - hydraulic feed up to 100 m/min - for wet wood - serving table TECHNICAL PARAMETERS: planing width 250 mm planing height 190 mm spindle diameter 50 mm electric height adjustment 1 lower spindle 15 kW 2 right spindle 7.5 kW 3 left spindle 15 kW 4 right spindle 7.5 kW Rsdpfx Asn Slk Uocdscb 5 upper spindle 7.5 kW 6 upper spindle 15 kW 7 lower spindle 7.5 kW 8 universal spindle 1800 7.5 kW feed smoothly adjustable up to 100 m/min feed pump motor power 22 kW nine rollers in the table top, three of which are in front of the first head seven upper steel pulling rollers four upper rubber pulling rollers pneumatic pressure jointer on 1-6-7 spindle automatic lubrication of the countertop feeding table 3000 mm speed smoothly adjustable up to 100 m/min two upper pneumatic rollers six lower pulling rollers minimum material length 650 mm Transport dimensions 11000x2400x2000 mm weight 9 tons

Year of construction: 1971, condition: used, Shaft system 1 bottom - 4kW, 2850 rpm 2 right lateral - 3 kW, 2850 rpm 3 lateral left - 3 kW, 2850 rpm 4 right side 3 kW, 2850 rpm Rcjdpfxjigqzro Acdob 5 top 5.5 kW, 2850 rpm 6 bottom - 4kW, 2850 rpm Dimensions 4900 mm x 1300 mm x H 1500mm Weight approx 5500 kg

Condition: good (used), Year of construction: 1979, functionality: fully functional, Four-sided planer / moulder Unimat 22N, 7 spindles Year of manufacture 1979 S/N 286512746 Manufacturer Weinig Germany planing width 220mm Planing height 120 mm Redpfxot Eu Hts Acdscb 7 planer shanks: planing table length 2000mm Spindle arrangement (speed of the working spindles 6000 rpm) 1. bottom, 4 kW 2. left, 5,5kW 3. right, 7.5 kW 4. left, 4 kW 5. top, 7.5 kW 6. bottom, 7.5 kW 7. bottom, 4.0 kW 5, 6, 7 with counter bearing 3 rollers in the table (not driven) spindle diameter 40 mm Flying circle of the dressing spindle 125mm Flying circle of the dressing spindle 100-180mm Largest flying circle of the milling spindles 180mm Cardanic feed Feed infinitely variable (frequency converter) 6-36 m /min. Manual Waxilit pump External dimensions L 4500 mm x W 1600 mm x 1700mm 4500 kg with 7 planer/knife heads included