Carton folding and packaging machines

Langenpac Chinook C08-1150

Condition: as good as new (ex-display), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: VZ0200A) Gantry-portal Loader (Double pick-up station) "BARGSTEDT" Mod. TBH 500/D/30/12 VZ0200B) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 525/8/A3/15 VZ0200C) In-feeding Rollerway "HOMAG" Mod. TDL 310/30/12 with 90° Turning device (from lenghtwise to crosswise) with double cone system VZ0200D) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 526/10/A3/30 VZ0200E) In-feeding Rollerway "HOMAG" Mod. TDL 510/25/12 with 90° Turning device (from crosswise to lenghtwise) with double cone system VZ0200F) Cleaning machine "WANDRES" VZ0200G) Gantry-portal Stacker (Double pick-up station) "BARGSTEDT" Mod. TSP 410/D/25/12 Lhedpfx Asdt Rgveb Aen

Condition: like new (used), Large tray sealer direct from UK meat factory where it was packing ground meat in MAP trays. We have two identical machines available. Ledpfxjilfkrs Ab Ajhn

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Maximum roll diameter 1100 mm Paper weight 80 - 500 g/m2 Film thickness 10-50 microns Working speed 10 - 65 m/min Electrical voltage 380V 50Hz Total power 78 kW Maximum power consumption 30 kW Total weight 8000 kg Machine dimensions 10130×2130×2960 mm Lsdpfx Asvy Aipeb Ajhn

Condition: good (used), 3m x 1000mm thermal oil fryer with teflon infeed and top hold down belt. Lodpfjq Iq Nbox Ab Aohn

Condition: refurbished (used), Year of construction: 2018, ALUMINIUM PRECISION HIGH-SPEED CUT-TO-LENGTH LINE 1500.3.12, made AUXMET Revamped and upgraded 2018 for aluminium. Thickness: 0,4 – 2 mm Coil width: 500 – 1.510 mm Lhjdpfx Aovtpdgsb Asn Exit sheet length: 500 – 4.000 mm Outer coil diameter: 800 - 1.800 mm Coil weight: 12 Tn N° of straightening rolls: 19 rolls Diameter of leveling rolls: 45 mm

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 102075501_20, The machine has only been set up and tested – never put into production. Equipped with SDX dosing system. Includes format sets for 500 g and 1000 g sugar packaging. Lodpfjx A Trisx Ab Aehn

Condition: used, System D8 brand painting chain, 94.50 linear meters, complete with towing, tracks and chain. Lhsdpfem D Hcfox Ab Aen

Condition: excellent (used), Year of construction: 2022, Aeoon Full DTG Printing Solution for Sale Included Equipment: - Aeoon Kyo Printer (8 printheads) - Aeoon Compact Printer (8 printheads) - Aeoon PTB Pretreatment Line - 6 m conveyor dryer (two lines) - 3 m conveyor dryer (one line) - RIP software - T-Mini automatic folding device Aeoon Compact: - 8 printheads - Color configuration: CMYK + White - Uses water-based ink - Integrated humidification system - Two printing axes - Automatic cleaning system - Maximum printing resolution: 2400 dpi - Maximum print area: 1200 x 800 mm Aeoon Kyo: - 8 printheads - Color configuration: CMYK + White - Uses water-based ink - Integrated projection system - Integrated humidification system - Three printing axes - Automatic cleaning system - Maximum printing resolution: 2400 dpi - Maximum print area: 2000 x 980 mm Aeoon PTB Pretreatment Line: - Printing area: 1000 x 3000 mm - 13 nozzles - Speed: 10 m/min - Automatic cleaning system Lhedpoxd U H Rsfx Ab Ajn Conveyor Dryers: - Two belt system - Belt width: 700 mm - Belt length: 6000 mm - Feeder length: 1200 mm - Stacker length: 1200 mm - Dryer height: 100 mm - Temperature up to 200°C T-Mini Folding Device: - Fully automatic T-shirt folding - Memory for up to 6 programs - Integrated packaging module

Condition: used, Year of construction: 2013, Overview Complete filling line from the food sector made by the German manufacturer Breitner (2013). It was previously used for filling liquid cheese products and sealed with press on and screw closure. Further more spray pumps with rising pipes can be handled. Due to various additional features, such as a laminar flow system and special attention to hygienic design, a cleanroom classification is achieved. Machines: Pos. 1 Bottle unscrambler Breitner BFC 8002 (2013) Pos. 2 Filling machine Breitner MDL 2086 (2013) Pos. 3 Rotary capping machine Breitner SRT 5044 (2013) Conveyor systems: several conveyors included. All conveyors: Chain width: 82,5 mm Belt housing: stainless steel AISI 304 Belt guide: plastic c-profile, 2-fold and stainless steel rods Chain material: Delrin steel The unclosed bottles are protected of falling dirt by a roof made of plexiglas over the conveyor.  Bottle formats: Our service: send us your requirements and we will check the possibility of processing your bottle format. Cap formats: Screw caps, press-on caps, spray pumps with riser pipes   Our service: send us your requirements and we will check the possibility of processing your cap format. Capacity: Unscrambler: max. 6.000/h Filling machine: max. 5.000/h Rotary capping: max. 5.000/h The output depends on the container and cap geometries and the filling product.    1. Bottle Unscrambler BREITNER BFC 8002 - Operation: continuous from supply bin - Bin volume / drum Ø: 1.4 m³ / 1500 mm - Working height: 900 mm, left → right - Material / Housing: AISI 304 stainless steel + plexiglass - Safety: door switches, overload protection - Power / Air: 3 × 400 V, 4 kW / 400 Nl/min at 6 bar - Container size: round Ø ≤100 mm × 250 mm, larger on request - Feature: blow-cleaning station with ionized air and dust extraction 2. Filling Machine BREITNER MDL 2086 Ljdpfxexqzmwj Ab Ashn - Filling: mass flow, 8 stations (expandable to 12) - Filling range: 100 – 2000 ml/g, up to 5,000 bottles/h - Working height / direction: 900 mm, left → right - Product-contact parts: AISI 316, food-grade hoses, VITON seals - Tank / Pressure: 100 L, 5 bar - Power / Air: 3 × 400 V, 4 kW / 150 Nl/min at 6 bar - Container size: H 50–350 mm, Ø/width 50–80 mm, various shapes - CIP cleaning: 8 cleaning cups, automatic spray & drain, multi-step program - Extras: laminar flow, remote maintenance, additional filling valves, swiveling tray, heating system 3. Rotary Capping Machine BREITNER SRT 5044 - Operation: continuous rotary, 4 capping stations - Output: up to 5,000 containers/h - Container size: Ø ≤100 mm, H ≤300 mm - Working height / direction: 900 mm, left → right - Drive / Tools: servo motor, 0,3-3,5 Nm; BREITNER capping tools - Power / Air: 3 × 400 V, 4 kW / 100 Nl/min at 6 bar - Control: B&R controller, touchscreen, 200 format memories, password-protected - Safety & inspection: door switches, overload, “No bottle – no closure,” optical cap check, reject system - Extras: servo vertical movement, torque monitoring, fan-based cap feed, vibratory sorter VIB 8001, cap supply SFB 8001

Condition: used, Year of construction: 2017, Overview  This Krones Sleevematic sleeve applicator from 2017 is in excellent condition with only 1,563 running hours. The machine is capable of applying sleeves at a speed of up to 30,000 bottles per hour (500 BPM). It is equipped with a 2-head sleeve applicator system and a steam-operated shrink tunnel (Shrinkmat). Bottle handling change parts for 300 ml, 500 ml, and 1500 ml PET bottles are included. Technical Data - Capacity: 30,000 bottles/hour (500 bottles/min) - Sleeve Applicators: 2-head sleeve feed system - Shrink Tunnel: Steam-operated (Shrinkmat) - Bottle Formats: 300 ml / 500 ml / 1,500 ml - Condition: Very good, low operating hours - Operating Hours: 1,563 Scope of Delivery Ljdpfowlka Eex Ab Aohn - Krones Sleevematic sleeve applicator - 2-head sleeve feed system - Shrink tunnel (steam) - Bottle format parts for 300/500/1500ml PET bottles