Industrial robot

KUKA KR 150 R2700 extra

Condition: excellent (used), Year of construction: 2015, Complete robot welding cell with rotating table and enclosure Robot: KUKA KR 150 R2700 extra Load capacity: 150kg reach: 2.090mm with welding gun (Dalex, new in 2018) with cooling device (water cooling in circuit) complete second welding gun (make ARO) included own cooling unit built in the machine automatic rotary table with 10-fold division (at present for running product only 5-fold built up) Workplace for parts insertion or disposal well illuminated and protected by light barriers Ibjdpfx Asnr E Enjhyoc Control of the complete line by means of Siemens SPS, provided by company HS Automation Siemens control panel for system operation at the insertion station mounted on a swivel arm All together in an enclosure with safety door. Plant can still be visited in operation.

Condition: good (used), Year of construction: 2000, control type: NC control, controller manufacturer: Davi Smart, number of rollers: 4, roller (bottom) diameter: 340 mm, roller (top) diameter: 370 mm, side roll diameter: 320 mm, roller length: 3,100 mm, sheet thickness (max.): 25 mm, overall weight: 18,500 kg, total length: 5,900 mm, total width: 2,200 mm, total height: 2,300 mm, power: 30 kW (40.79 HP), Equipment: cone bending device, 4 roll plate bender Davi Promau - MCB-3037 MACH-ID 9751 Make: Davi Promau Type: MCB-3037 Control: Davi Smart Year: 2000 Conical bending attachment Extended roll end for section bending jobs Digital read out position side rolls Central lubrication CE-Declaration Rolling width: 3100mm Rolling thickness 3x toproll Ø:20mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending: 22mm Top Roll Ø: 370mm Bottom Roll Ø: 340mm Side roll Ø: 320mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Ibedpozi Ra Rofx Ahysc Power: 30kW Length: 5900mm Width: 2200mm Height: 2300mm Weight: 18500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), overall weight: 13,000 kg, total width: 2,200 mm, total length: 8,000 mm, total height: 3,300 mm, Flanging and dishing machine Iodpfx Aezil H Eshyebc BOLDRINI - RIBO 20HY/4000 BOLDRINI RIBO 20HY/4000 Hydraulic Flanging & Dishing Machine. Capacity up to Ø 4,000 mm. Suitable for manufacturing dished ends, pressure vessel heads and tank bottoms. Length:8000mm Width:2200mm Height:3300mm Weight:13000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2000, condition: ready for operation (used), Working area X/Y/Z: 1200mm/1200mm/840mm, dimensions X/Y/Z: 1300mm/1300mm/2010mm, weight: 650kg, sound level: 70dB(A) without blasting, 82dB(A) with blasting at 3 bar, max compressed air: 10bar. Including an electronically infinitely variable steel turntable (diameter: 1000mm), a blasting agent drying system and a second blasting gun unit with carbide blasting nozzle. Documentation available. Iodpfx Ahetk Rwtsysbc

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 1,500 W, positioning speed: 80 m/min, repeat accuracy: 0.03 mm, input frequency: 50 Hz, warranty duration: 24 months, working range: 6,000 mm, Equipment: cooling unit, safety light barrier, G-12A HIGH SPEED PROFESSIONAL TUBE LASER CUTTING MACHINE 1500-3000W The G series is equipped with many high-quality components with extreme performance and powerful cutting functions,suitable for tube cutting of various types and diameters ● The Highest Standards of Chucks in the Industry ● Two Methods for Fewer-tailing Cutting ● Variable Diameter Wheel Supporting ● Automatic Unloading Device ● Super Dust Removal System ● Patented Dust Baffle ● High-strength Cage Structure Welded Machine Bed Technical Parameter: Power: 1500W-3000W Maximum Tube Processing Size: 6000mm*φ120mm Max. Rotating Speed of Chucks: 160r/min X/Y-axis Positioning Accuracy≤0.05mm X/Y-axis Repositioning Accuracy≤±0.03mm Maximum positioning speed: 80m/min Max. Acceleration: 1.5G Round Tube Processing Dim: Φ10mm-Φ120mm Square Tube Processing Dim: 10mm*120mm Overall Dimensions: 9000mm*2700mm The Highest Standards of Chucks in the Industry The highest standards of chucks in the industry with strong clamping force, high rigidity, high speed, and stable performance Two Methods for Fewer-tailing Cutting Support two fewer-tailing cutting methods , choose one of them on the software interface according to different tube diameters Chuck double jaws: standard double jaws, small tube cutting precision is guaranteed Support: 2 sets of variable diameter wheel support standard (optional to increase to 3 sets)/optional servo support Unloading: [3M/4M] cylinder unloading rack/optional-[3M/4M] servo unloading rack/optional Loading: [Fully automatic loading rack/simple fully automatic loading rack/semi-automatic loading rack]/optional Dust removal: standard rear card hollow dust removal Ibjdpfxsuc Sife Ahysc Short tail: chuck fixed, crossbeam fixed, short tail, front card open, rear card Continue to move forward, shorten the tail, ≥80 mm; if the short tail function is not used, the tail is about 200 mm Variable Diameter Wheel Supporting G Series has a wide range of cutting for various types and diameters of tubes, supported by the variable diameter wheel Automatic Unloading Device Efficient automatic unloading, saving time and labor costs, greatly improving production efficiency Super Dust Removal System The super dust removal system with ventilation design inside the chuck and the tube reduces the slag hanging in the tube, which is independently researched and developed by Glorystar Patented Dust Baffle Patented dust baffle protects important components from pollution and ensures stable performance High-strength Cage Structure Welded Machine Bed The industry’s highest-quality high strength cage structure welded machine bed with long life, anti-vibration, anti-torsion and anti-deformation

Condition: used, turning length 600 mm turning diameter over bed 360 mm turning diameter over slide rest 190 mm Iodpfsxaamusx Ahyobc bed width 295 mm number of spindle speeds 45 - 2240 U/min. spindle bore 33,0 mm tailstock quill taper MT MK 3 feed Längs 0,02-0,8 mm/U feed Quer 0,0125-0,5 mm/U total power requirement 5,5 kW weight of the machine ca. 1900 kg range L-W-H 2050 x 950 x 1280 mm Refurbished and repainted in 2013 Costs around 16.000 euros Furnishing: - WNW NILES 3-jaw chuck Ø 200 mm - Multifix steel holder size B with inserts - revolving center points - chuck key - Movable tailstock - Operation manual

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm stationary and directly at the assembly site. Transport is possible with lift trucks or the optional rollers. A powerful three-phase motor and a precision gearbox provide a powerful drive. The machine convinces with its compact and slim design as well as the very free bending range. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient and menu-driven user interface in 14 languages with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback.With the help of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The principle of "stationary tube and rotating tool" ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the profile bending attachment PB20 flat, square and round bars can be bent without any problems. Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering - Hydraulic piping - Meander bending - prototyping - Sanitary and heating engineering - shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material three-phase current 400 V - Bending radius up to 500 mm - Multifunctional machine control Bending angle adjustment (0,1°) - Maximum bending angle 240 - Safety foot switch with emergency stop Iodpjndk N Aefx Ahyjbc - Weight 600 kg OPTIONAL ACCESSORIES: - Adapter system for tools from model series 3000/6000 with bending radius from 45 mm, incl. hexagonal shaft 40 mm - Profile bender PB20 - for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm - Small bending device KBV - Special tools according to specification - Software adaptations for special tasks OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 capacity 45 degrees: round 550 mm capacity 45 degrees: square 550 mm capacity 45 degrees: flat 550x600 mm Ibodpfjfg E Hmex Ahyec capacity 60 degrees: round 370 mm capacity 60 degrees: square 370 mm capacity 60 degrees: flat 370x600/450 mm saw band length 7260 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,8 t dimensions of the machine ca. 5,85 x 3,7 x 2,7 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new “B&S positioning system”. reached. An intelligent NC control ensures smooth interaction of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake using large radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC Control A CNC control allows the programming of up to 90 cutting programs with different section lengths, quantities and mitres. Positioning system gripping on both sides The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, functionality: fully functional, Year of construction: 2021, For sale: Brand new, never-used DAVI bending machine. *MAIN FEATURES MCP 18* *1. Type and Capacity* - *3 hydraulically driven rollers*, pyramid configuration - *Shafts Ø 180 mm* → this is the "18" in MCP 18 - *Bending*: round, square, rectangular tubes, angles, flat bars, UPN, IPE, HEA... all b235 profiles *2. Indicative capacities on MCP series* DAVI does not provide the exact MCP 18 datasheet online, but for the equivalent MCP range: Profile Approx capacity MCP 18 Round tube Ø 6" to 8" depending on wall thickness Ijdpfsy N Rbwox Ahysbc Solid square 80x80 mm to 100x100 mm Angle 120x120x12 mm UPN UPN 200 - 240 IPE flat flange IPE 200 - 240 Actual figures depend on wall thickness and steel grade. The 18 cm Ø shafts make this a mid/high-category machine. For all available options, please refer to the photo in the listing.

Condition: used, functionality: fully functional, Year of construction: 1997, 5-Axis CNC Tube Bending Machine BLM Dynamo – 0 Serial number: 605970300001 Year of manufacture: 1997 Voltage: 380V 50HZ Machine weight: 1500 kg Control: DOC 85C BLM Bar Loader BLM CARM 7 Serial number: 340040102059 Year of manufacture: 2004 Weight: 405 kg Isdst R Tgiopfx Ahyobc Without conveyor belt Without protective guard TECHNICAL DETAILS Number of axes: 5 Average output: ~ 2400 bends/h Bending capacity, round tube R=45 kg/mm²: 4 - 12.7 x 1.5 mm Bending capacity, round tube R=35 kg/mm²: 4 - 14 x 1 mm Bending capacity, round tube Al/Cu/Ms: 4 - 18 x 1.25 mm Bar loader: BLM Carm 7 (Year: 2004) Positioning speed, X-axis: 2000 mm/s Bending speed, H/Z Y-axis: 500 °/s Rotation speed, Z-axis: 900 °/s Rotation speed, Z-axis: 100 °/s Positioning speed, T-axis: 500 mm/s Measuring tolerance, X/T axis: ± 0.1 mm Measuring tolerance, Y/Z/Q axis: ± 0.1° Maximum reach with maximum acceleration X-Y-Z: 1000 mm - 90/90/0° - ° with tube 18 x 1.25 mm MACHINE DETAILS Voltage: 380 V, 50 Hz Hydraulic pressure: max. 120 bar Machine weight: 1500 kg Control: DOC 85C Ex works Dortmund, free loading onto truck.